Catálogo Trituradoras - Desbrozadoras Rotativas Spearhead

Rotary & Flail Mowers

When you require a machine for themaintenance of vegetation or themanagement of crop stubble residues youshould look no further than Spearhead.

With the most extensive range of products in itsmarket sector, and a heritage and reputationbuilt on providing professional solutions;Spearhead really is the first choice for all of yourRotary and Flail mowing needs.

Spearhead boasts one of the most extensivefleets of Rotary Mowers available in the worldtoday. Working widths from 1.6 metres rightthrough to 12.1 metres and a variety of specialistblade options mean that your every need is

catered for. Added to this you have either theheavy duty MULTICUT or the high specificationprofessional STARCUT series to choose from.Complimenting the market leading RotaryMower range is the extensive Flail Moweroffering that is just as complete. Models built inworking widths from 1.5 metres through to 5metres offer an alternative cutting style andimpressive fine cut mulch, whether it be fine turfor stubble applications that are to bemaintained.

Acclaimed as a leading name and a specialistprovider of mowing equipment Spearhead isnow the first choice for Agricultural, Municipal,Military and Airport applications.

When you require a machine for themaintenance of vegetation or themanagement of crop stubble residues youshould look no further than Spearhead.

With the most extensive range of products in itsmarket sector, and a heritage and reputationbuilt on providing professional solutions;Spearhead really is the first choice for all of yourRotary and Flail mowing needs.

Spearhead boasts one of the most extensivefleets of Rotary Mowers available in the worldtoday. Working widths from 1.6 metres rightthrough to 12.1 metres and a variety of specialistblade options mean that your every need is

catered for. Added to this you have either theheavy duty MULTICUT or the high specificationprofessional STARCUT series to choose from.Complimenting the market leading RotaryMower range is the extensive Flail Moweroffering that is just as complete. Models built inworking widths from 1.5 metres through to 5metres offer an alternative cutting style andimpressive fine cut mulch, whether it be fine turfor stubble applications that are to bemaintained.

Acclaimed as a leading name and a specialistprovider of mowing equipment Spearhead isnow the first choice for Agricultural, Municipal,Military and Airport applications.

2 3

Contents

Agricut Range Page 6 - 7

Multicut 160/200 Page 10 - 11Multicut 300 Page 12 - 13Multicut 420 Page 14 - 15Multicut 460 Page 16 - 17Multicut 620 Page 18 - 19Multicut 820 Page 20 - 21

Starcut 500 Page 26 - 27Starcut 730 Page 28 - 29Starcut 910 Page 30 - 31Starcut 1210 Page 32 - 33

Destroyer Page 38 - 39

QS Range Page 42 - 43Trident Range Page 44 - 45

QHD Range Page 48 - 49QHD Offset Range Page 50 - 51

AGRICUT

FINE TURF FLAILS

HD FLAILS

4 5

DESTROYER

Heavy Duty Gearbox Over run Protection All Steel Smooth Top Deck Construction Free-Swinging Blades Reduce Shock Loads on the

Gearbox

Unique Lower Link Floatation Updraft Blades Available in Both Inline and Offset Cutting Positions Accurate Cutting Height Adjustment Spring Loaded Floatation Adjustable Skids To Minimise Ground Markings

The Spearhead AGRICUT pasture topper range has beendesigned for reliability, performance and value formoney. Benefiting from a smooth deck, thestreamlined design is both sleek and easy to clean,whilst the free swinging updraft blades reduce shockloading through the drive train, but provide suction tolift the crop into the cutting zone.

Cut height is also easily adjusted by the simplemovement of two parabolic skids mounted either sideof the deck.

The AGRICUT range is available in three workingwidths, with two inline models at 1.8 metres and 2.7metres, and a further offset model at 2.4 metres.

6 7

AGRICUT AGRICUT AGRICUTMODEL 180 240 OFFSET 270Cutting Width 1.80m 2.40m 2.70m

Overall Width 1.97m 2.66m 2.97m

Machine Weight 290kg 550kg 430kg

Transport Width 1.97m 1.85m 2.97m

Cutting Range 30 - 30 - 30 -

150mm 150mm 150mm

Number of Rotors 1 2 2

Blades 2 4 4

PTO Protection Shear Bolt Shear Bolt Shear Bolt

PTO Speed 540rpm 540rpm 540rpm

Tractor Power Reqd 30hp 30hp 30hp

AGRICUT Range

Spearhead is world renowned for the MULTICUT Rotary Mower range

Having built a reputation for quality design, robust build, and exceptional output the MULTICUT rangeis now the leader in its field.

Encompassing a selection of working widths between 1.6 metres and 8.2 metres across seven modelsthere is sure to be a machine to suit your requirements. The machines are linkage mounted up to 4.2metres with three trailed units of 4.6 metres, 6.2 metres and 8.2 metres at the top end of the range.

With a working speed of up to 16km/h the MULTICUT is a large capacity machine suitable for work onalmost all types of terrain meaning it is not only the choice of farmers; but also that of the military,airports, racecourses and large plantations worldwide

Leading the field in rotary mowers

8 9

1.60 metre and 2.0 metre Cutting Widths High Strength Steel Deck Construction Replaceable Full Length Skids Heavy Duty Cast Iron Gearbox 95HP Rotor Driveline Front & Rear Chain Safety Curtains 8 PLY500 x 8 Industrial Tyres HD3 High Lift Blade Kit Anti Scalp Rotor Protection Dishes Slip Clutch Protection & Over-run Cutting Chain KitOption Rapid in Field Cutting Height Adjustment Floating Linkage

The toughest Rotary Swipe of its type, the MULTICUT

160 and MULTICUT 200 are designed and

manufactured without any compromise on quality.

Featuring the unique high lift MULTICUT HD3 Blade

arrangement these two specialist models are suitable

for cutting and mulching scrub and vegetation of up to

80mm diameter. With full length skids and a floating

linkage the MULTICUT 160 and MULTICUT 200 give a

consistent cut on even the most undulating ground.

MULTICUT MULTICUT MODEL 160 200

Cutting Width 1.60m 2.00m

Overall Width 1.75m 2.12m

Machine Weight 520kg 700kg

Transport Width 1.75m 2.12m

Gearbox Rating 95hp 95hp

Cutting Range 50-250mm 50-250mm

Number of Rotors 1 1

Blades 3 3

PTO Protection Slip Clutch Slip Clutch

PTO Speed 540rpm 540rpm

Tractor Power Required 40hp 50hp

10 11

160 / 200

12 13

3.0 metre Cutting Width High Strength Steel Deck Construction Replaceable Full Length Skids 161HP Input Splitter Gearbox Heavy Duty 111HP Rotor Gearboxes Front & Rear Chain Safety Curtains 8 PLY500 x 8 Industrial Tyres HD2 High Lift Blade Kit Anti Scalp Rotor Protection Dishes 140MM Blade Overlap for Clean Cutting Input Knocking Clutch for Tractor Protection Shock Absorber Driveline Protection Rapid in Field Cutting Height Adjustment Floating Linkage

The no compromise mower for the most demanding of

vegetation management tasks. The MULTICUT 300 is

shaft driven and features the HD2 blade system for

maximum lifting and cutting capacity. Specially

designed under deck construction contributes to a

thorough chopping of the crop and an even spread

from the rear of the machine leaving a finish to be

proud of.

MULTICUT MODEL 300

Cutting Width 2.85m

Overall Width 3.00m

Machine Weight 1050kg

Transport Width 3.00m

Gearbox Rating 161hp & 111hp

Cutting Range 10-350mm

Number of Rotors 2

Blades 4

PTO Protection Knocking Clutch

& Rubber Shock

Absorber

PTO Speed 1000rpm

Tractor Power Required 50hp

12 13

300

14 15

4.2 metre Cutting Width Delta Style Deck Construction Replaceable Full Length Skids Heavy Duty Cast Iron Gearbox Front & Rear Chain Safety Curtains HD2 High Lift Blade Kit Anti Scalp Rotor Protection Dishes Forward Weight Transfer Deck Protection Rings Slip Clutch Protection & Over-run High Lift Blades Rapid in Field Cutting Height Adjustment Floating Linkage Hydraulically Folding to Transport width of 2.8M Anti Scalp Blade Protection HD3 Blade KitOption

The MULTICUT 420 is a 3 point linkage mounted

machine ideal for use with tractors of 80HP and above.

Sitting perfectly between the fixed and trailed mowing

units available on todays market the MULTICUT 420

gives added versatility alongside a host of innovative

features. As standard with the HD2 blade cutting

system, a HD3 unit is also available as an option. Most

notably inward folding wings keep the transport width

within 2.8 metres meaning narrow lanes are easily

negotiated and no on road towing kit is required.

MULTICUT MODEL 420

Cutting Width 4.20m

Overall Width 4.40m

Machine Weight 1700kg

Transport Width 2.80m

Gearbox Rating 100hp

Cutting Range 25-400mm

Number of Rotors 3

Blades 6 or 9

PTO Protection Slip Clutch &

Over-run

PTO Speed 1000rpm

Tractor Power Required 80hp

14 15

420

22 23

4.6 metre Cutting Width High Strength Steel Deck Construction Replaceable Full Length Skids 170HP Input Splitter Gearbox Front & Rear Chain Safety Curtains Hydraulically Controlled Parallel Linkage Puncture Resistant Industrial Tyres HD3 Rotors with 9 High Lift Cutting Blades Anti Scalp Rotor Protection Discs Floating Wings for Even Cutting Deck Protection Rings High Specification SlipClutch Protection & Over-run Hydraulically Folding to Transport width of 2.8M Hydraulic Height Adjustment