Upload
marysdinescu
View
241
Download
0
Embed Size (px)
Citation preview
8/10/2019 Manual a700 Eng
1/132
OWNERS MANUAL
This manual will show you how to useyour FUJIFILM DIGITAL CAMERAFinePix A700 correctly.Please follow the instructions carefully.
BL00570-200(1)
Getting Ready
Using the Camera
Advanced Features Photography
Settings
Camera Connection
SoftwareInstallation
Playback
Movie
Appendices
Troubleshooting
8/10/2019 Manual a700 Eng
2/132
2
Warning
To prevent fire or shock hazard, do not expose the unit torain or moisture.
For customers in the U.S.A.
Tested To ComplyWith FCC StandardsFOR HOME OR OFFICE USE
FCC Statement
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received,including interference that may cause undesiredoperation.
CAUTION
This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in aresidential installation. This equipment generates, uses,and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions,may cause harmful interference to radio communications.
However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or televisionreception, which can be determined by turning theequipment off and on, the user is encouraged to try tocorrect the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuitdifferent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TVtechnician for help.
You are cautioned that any changes or modifications notexpressly approved in this manual could void the usersauthority to operate the equipment.
Notes on the Grant:To comply with Part 15 of the FCC rules, this product mustbe used with a Fujifilm-specified ferrite-core A/V cable,USB cable, and DC supply cord.
For customers in Canada
CAUTION
This Class B digital apparatus complies with CanadianICES-003.
Please read the Safety Notes (p.127) and makesure you understand them before using the camera.
8/10/2019 Manual a700 Eng
3/132
3
IMPORTANT
NOTICEBEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILMCorporation, PLEASE READ THIS END USER LICENSE AGREEMENTCAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT,SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM.
BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BEBOUND BY THIS AGREEMENT.
End User License Agreement
This End User License Agreement (Agreement) is an agreement betweenFUJIFILM Corporation (FUJIFILM) and you, which sets forth the termsand conditions of the license granted for you to use the software providedby FUJIFILM.The CD-ROM contains third party software. In case a separate agreementis provided by a third party supplier for its software, the provisions of suchseparate agreement shall apply to the use of such third party software,prevailing over those of this Agreement.
1. Definitions.(a) Media means the CD-ROM titled Software for FinePix BZ- whichis provided to you together with this Agreement.
(b) Software means the software which is recorded on Media.(c) Documentation means the operation manuals of Software and
other related written materials which are provided to you togetherwith Media.
(d) Product means Media (including Software) and Documentationcollectively.
2. Use of Software.FUJIFILM grants to you a nontransferable, nonexclusive license:(a) to install one copy of Software onto one computer in binary machine
executable form;(b) to use Software on the computer onto which Software is installed; and
(c) to make one backup copy of Software.3. Restrictions.3.1 You shall not distribute, rent, lease or otherwise transfer all or any
part of Software, Media or Documentation to any third party withoutFUJIFILMs prior written consent. You also shall not sublicense,assign or otherwise transfer all or any part of the rights granted toyou by FUJIFILM under this Agreement without FUJIFILMs priorwritten consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall notcopy or reproduce all or any part of Software or Documentation.
3.3 You shall not modify, adapt or translate Software or Documentation.You also shall not alter or remove copyright and other proprietarynotices that appear on or in Software or Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer,decompile, or disassemble Software.
4. Ownership.All copyrights and other proprietary rights to Software and Documentation areowned and retained by FUJIFILM or the third party suppliers as indicated onor in Software or Documentation. Nothing contained herein shall beconstrued, expressly or implicitly, as transferring or granting any right, license,or title to you other than those explicitly granted under this Agreement.
5. Limited Warranty.
FUJIFILM warrants to you that Media is free from any defect in materialand workmanship under normal use for ninety (90) days from the dateof your receipt of Media. Should Media not meet the foregoing warranty,FUJIFILM shall replace such defective Media with other Media bearingno defect. FUJIFILMs entire liability and your sole and exclusiveremedy with regard to any defect in Media shall be expressly limited tosuch FUJIFILMs replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDESPRODUCT AS IS AND WITHOUT WARRANTIES OF ANY KIND,EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY
COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHERPROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,OR FITNESS FOR ANY PARTICULAR PURPOSE.
7. LIMITATION OF LIABILITY.IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANYGENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FORLOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THEUSE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HASBEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
8. No export.You acknowledge that neither Software nor any part thereof, will betransferred, or exported to any country or used in any manner in violationof any export control laws and regulations to which Software is subject.
9. Termination.In case you breach any of the terms and conditions hereof, FUJIFILMmay immediately terminate this Agreement without any notice.
10.Term.This Agreement is effective until the date when you cease to useSoftware, unless earlier terminated in accordance with Section 9 hereof.
11. Obligation upon termination.Upon termination or expiration of this Agreement, you shall, at your ownresponsibility and expense, delete or destroy immediately all Software(including its copies), Media and Documentation.
12. Governing Law.This Agreement shall be governed by and construed in accordance withlaws of Japan.
Be sure to read this page before using the software.
8/10/2019 Manual a700 Eng
4/132
4
EC Declaration of Conformity
WeName: Fuji Photo Film (Europe) GmbHAddress: Heesenstrasse 31
40549 Dusseldorf, Germany
declare that the productProduct Name: FUJIFILM DIGITAL CAMERA FinePix A700Manufacturers Name: FUJIFILM CorporationManufacturers Address: 26-30, Nishiazabu 2-chome, Minato-ku,
Tokyo 106-8620, Japan
conforms to the following Standards:Safety:EN60065EMC: EN55022: 1998 Classe B
EN55024: 1998
EN61000-3-2: 1995 + A1: 1998 + A2: 1998
following the provision of the EMC Directive (89/336/EEC, 92/31/EEC and93/68/EEC) and Low Voltage Directive (73/23/EEC).
Dusseldorf, Germany
Place
September 1, 2006
This product comes with batteries. When these are empty, you shouldnt throw themaway but deliver them as domestic chemical refuse.
Signature/Managing DirectorDate
8/10/2019 Manual a700 Eng
5/132
5
Disposal of Electric and Electronic Equipment in Private Households
Disposal of used Electrical & Electronic Equipment(Applicable in the European Union and other European countries withseparate collection systems)
This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that thisproduct shall not be treated as household waste.
Instead it should be taken to an applicable collection point for the recycling of electrical and electronicequipment.By ensuring this product is disposed of correctly, you will help prevent potential negative consequences tothe environment and human health, which could otherwise be caused by inappropriate waste handling of thisproduct.
If your equipment contains easy removable batteries or accumulators please dispose these separately according to your localrequirements.The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,please contact your local city office, your household waste disposal service or the shop where you have purchased the product.
In Countries outside the EU:If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.
8/10/2019 Manual a700 Eng
6/132
6
Contents
Warning................................................................. 2IMPORTANT......................................................... 3EC Declaration of Conformity................................ 4Disposal of Electric and Electronic Equipment
in Private Households...................................... 5Contents................................................................ 6Preface.................................................................. 8About this Manual ............................................... 10Accessories Included .......................................... 11Camera Parts and Features................................ 12Example of LCD Monitor Text Display ................ 13
Getting Ready
Loading the Batteries .......................................... 14Checking the battery charge ....................... 16
Loading the xD-Picture Card ......................... 17Turning On and Off ............................................. 19Setting the Date and Time .................................. 20Correcting the Date and Time............................. 22Selecting the Language ...................................... 23
Using the Camera
Taking Pictures (aAUTO Mode) ..................... 24Taking pictures with the focus and exposure
locked....................................................... 28Adjusting the shot composition ................... 30
Viewing the Images............................................. 31oErasing the Images/Movies ............................ 34
Advanced Features Photography
Using the Photography Functions Procedure of Setting...................................... 36
Setting the Shooting Mode................................. 38eMacro (Close-up)........................................... 40dSetting the Flash............................................. 41Photography Menu Operation ............................ 43
Setting the menus ...................................... 43Selecting quality setting(yQUALITY).......................................... 45
Taking pictures using self-timer(*SELF-TIMER).................................... 46
Specifying sensitivity setting (S ISO)........ 48Adjusting exposure compensation
(S EV) ................................................... 49Adjusting color balance
(TWB) .................................................. 50
Advanced Features Playback
Using Playback Menu......................................... 51Setting the menus ...................................... 51DPOF set frame (uDPOF)....................... 51Protecting the images
(iPROTECT)....................................... 54
Automatic Playback(gPLAYBACK)..................................... 55Copying the images (VCOPY) ................ 56Recording voice memos
(#VOICE MEMO).................................. 57Playing back voice memo .......................... 59Trimming (YTRIMMING) ......................... 61
8/10/2019 Manual a700 Eng
7/132
7
Advanced Features Movie
rRecording Movies .......................................... 63Changing movie size.................................. 65
wPlaying Back Movies ..................................... 66
Settings
Adjusting LCD Brightness orPlayback Volume........................................... 67
USET-UP......................................................... 68Using the SET-UP menu............................. 68SET-UP menu option .................................. 69
Camera ConnectionConnecting to a TV ............................................. 76Connecting Camera Directly to Printer
PictBridge Function ....................................... 77
Software Installation
Installation on a Windows PC ............................. 82Pre-installation checklist ............................. 82
Installation on a Mac OS X ................................. 85Pre-installation checklist ............................. 85
Connecting to a PC ............................................. 88Using FinePixViewer................................... 92
Appendices
System Expansion Option.................................. 94Accessories Guide ............................................. 95
Using Your Camera Correctly ............................ 97Power Supply and Batteries ............................... 98Discharging rechargeable batteries ......... 100
Notes on the xD-Picture Card andthe Internal Memory.................................... 102
Warning Displays ............................................. 104
Troubleshooting
Troubleshooting................................................ 108
Specifications ................................................. 114Explanation of Terms ..................................... 118FUJIFILM Digital Camera Worldwide
Network..................................................... 120Safety Notes................................................... 127
8/10/2019 Manual a700 Eng
8/132
8
Preface
Z Test Shots Prior to Photography
For important photographs (such as weddings andoverseas trips), always take a test shot and view theimage to make sure that the camera is working normally. FUJIFILM Corporation cannot accept liability for any
incidental losses (such as the costs of photography orthe loss of income from photography) incurred as aresult of faults with this product.
Z Notes on Copyright
Images recorded using your digital camera system cannotbe used in ways that infringe copyright laws without theconsent of the owner, unless intended only for personaluse. Note that some restrictions apply to the
photographing of stage performances, entertainmentsand exhibits, even when intended purely for personal use.Users are also asked to note that the transfer ofxD-Picture Cardcontaining images or data protectedunder copyright laws is only permissible within therestrictions imposed by those copyright laws.
Z Handling Your Digital Camera
This camera contains precision electronic components.To ensure that images are recorded correctly, do not
subject the camera to impact or shock while an image isbeing recorded.
Z Liquid Crystal
If the LCD monitor is damaged, take particular care withthe liquid crystal in the monitor. If any of the followingsituations arise, take the urgent action indicated. If liquid crystal comes in contact with your skin
Wipe the area with a cloth and then wash thoroughlywith soap and running water.
If liquid crystal gets into your eyeFlush the affected eye with clean water for at least 15minutes and then seek medical assistance.
If liquid crystal is swallowedFlush your mouth thoroughly with water. Drink largequantities of water and induce vomiting. Then seekmedical assistance.
ZDamaged by Water or Sand
FinePix A700 can be damaged on the inside and outsideby water and sand. When you are at the beach or close towater, make sure that the camera is not damaged bywater or sand. Take care not to place the camera on a wetsurface.
ZDamaged by Condensation
If the camera is carried from a cold location into a warm
place, water droplets (condensation) may form on theinside of the camera or on the lens. When this occurs, turnthe camera off and wait an hour before using the camera.Condensation may also form on the xD-Picture Card. Inthis event, remove the xD-Picture Cardand wait a shorttime.
8/10/2019 Manual a700 Eng
9/132
9
Z Trademark Information
and xD-Picture Cardare trademarks ofFUJIFILM Corporation.
IBM PC/AT is a registered trademark of InternationalBusiness Machines Corp. of the U.S.A.
Macintosh, Power Macintosh, iMac, PowerBook, iBookand Mac OS are trademarks of Apple Computer, Inc.,registered in the U.S. and other countries.
Microsoft, Windows, and the Windows logo aretrademarks, or registered trademarks of MicrosoftCorporation in the United States and/or other countries.Windows is an abbreviated term referring to theMicrosoftWindowsOperating System.
* The Designed for MicrosoftWindowsXP logo refersto the camera and the driver only.
Other company or product names are trademarks orregistered trademarks of the respective companies.
Z Notes on Electrical Interference
If the camera is to be used in hospitals or aircrafts, pleasenote that this camera may cause interference to otherequipment in the hospital or aircraft. For details, pleasecheck with the applicable regulations.
Z Explanation of Color Television System
Z Exif Print (Exif ver. 2.2)
Exif Print Format is a newly revised digital camera fileformat that contains a variety of shooting information foroptimal printing.
* See Using Your Camera Correctly (p.97) for moreinformation.
NTSC: National Television System Committee, colortelevision telecasting specifications adoptedmainly in the U.S.A., Canada and Japan.
PAL: Phase Alternation by Line, a color televisionsystem adopted mainly by European countriesand China.
8/10/2019 Manual a700 Eng
10/132
10
About this Manual
Z 4-direction (nopq) button
Up, down, left, and right are indicated by black triangles in the Owners Manual. Up or down is shown as noro, and left orright is shown asporq.
CAUTION
This mark denotes issues that may affect thecameras operation.
CHECK
This mark denotes points to notice in thecameras operation.
MEMO
This mark denotes additional topics that
complement the basic operating procedures.
Icons indicate the modes that are available.
When pressingq:
When pressing MENU/OK:
8/10/2019 Manual a700 Eng
11/132
11
Accessories Included
AA-size Alkaline Batteries (LR6) (2)
Strap (1)
A/V cable (1)Including plug topin-plug 2
USB cable (mini-B) (1)
CD-ROM (1)Software for FinePix BZ
Owners Manual (this manual) (1)
Attaching the strap
Attach the strap as shown in 1 and 2.
When attaching the strap, move the fastener to adjust the
length and slightly away from the end of the strap, asshown in figure 1.
21
8/10/2019 Manual a700 Eng
12/132
12
Camera Parts and Features
Refer to the pages in parentheses for information on using the camera parts or features.
AShutter buttonBMicrophoneCLens (lens cover)DSelf-timer lamp (p.47)EPOWER buttonFSpeakerGFlash (p.41)H;USB socket (mini-B)IA/V OUT (audio/visual output) socket (p.76)JDC IN 3V (power input) socket (p.76)K Indicator lamp (p.27)LwPlayback buttonMLCD monitorNTripod mountOxD-Picture Card slot (p.17)PBattery compartment (p.15)Qp/ eMacro button (p.40)Rq/ dFlash button (p.41)Sn/ [Tele zoom switch (p.25, 32)To/ ]Wide zoom switch (p.25, 32)UStrap mountVMENU/OK buttonWDISP (display) / BACK button (p.30, 31)XBattery cover (p.14)
MENU
DISP/
BACK
/OK
OPEN
8/10/2019 Manual a700 Eng
13/132
13
Example of LCD Monitor Text Display
Z Photography mode
Z Playback mode
FinePix A700 has internal memory that can store images without xD-Picture Card.Yappears on the LCD monitor when theinternal memory is active.
1/ 1/2006
ISON
200
6
-1 1 3
AF
A*Self-timer (p.46)BeMacro (close-up) (p.40)CCFlash (p.41)DsPhotography mode
(p.38)EZoom bar (p.25)FDate (p.20)G6White balance (p.50)H N Quality mode (p.45)INumber of available
frames (p.117)
J ISO 200 Sensitivity (p.48)KCBattery level warning
(p.16)L{AF warning (p.25)M|Camera shake
warning (p.26)NYInternal memory (p.18)OSExposure
compensation (p.49)PAF frame (p.25)
12:00 AM
100-0009
1/ 1/2006
AwPlayback mode (p.31)BuDPOF (p.51)CFProtection (p.54)DZoom bar (p.32)
EDate (p.20)FFrame number (p.71)GCBattery level warning
(p.16)HYInternal memory (p.18)ITime (p.20)
8/10/2019 Manual a700 Eng
14/132
14
Loading the Batteries
Batteries are required to operate the digital camera. Atfirst, load the batteries in the camera.
Z Compatible batteries
AA-size alkaline batteries (2) or AA-size Ni-MHrechargeable batteries (2) (sold separately)
CAUTION
Never use the following types ofbatteries, as they could causeserious problems such as batteryfluid leakage or overheating:1.Batteries with split or peeling
outer casings2.Combinations of different types
of batteries or new and used batteries together Do not use manganese or Ni-Cd batteries. Use the same brand and grade AA-size alkaline
batteries as those supplied with the camera.
1 Open the battery cover.
CHECK
Check that the camera is turned off before opening thebattery cover.
CAUTION
Do not open the battery cover while the camera is on.This could damage the xD-Picture Cardor ruin theimage files on the xD-Picture Card.
Do not apply force to the battery cover.
Outer casing
14
8/10/2019 Manual a700 Eng
15/132
15
GettingReady
2Load the batteries correctly as indicated bythe polarity icons.
CAUTION
Match the polarity icons (+and,) of the batteries tothose on the inside of the battery cover.
3Close the battery cover.
8/10/2019 Manual a700 Eng
16/132
16
Loading the Batteries
Checking the battery charge
Turn the camera on and check the battery charge.
AThere is ample battery charge. (Not displayed)
BThere is insufficient charge left in the batteries. Thebatteries will soon run out. Have a new set of batteriesready. (Lit red)
CThe batteries are depleted. The display will shortly goblank and the camera will stop working. Replace orrecharge the batteries. (Blinking red)
CAUTION
Soil, such as fingermarks on the poles of the batteries,can shorten time for which the batteries can be used.
The time for which AA-size alkaline batteries (referredto hereafter simply as alkaline batteries) can be used
varies depending on the brand. Some brands of alkalinebatteries may stop providing power more quickly thanthose supplied with the camera. Note also that due totheir nature, the time for which alkaline batteries can beused decreases in cold conditions (0C to +10C/+32Fto +50F). For this reason, it is better to use AA-size Ni-MH batteries.
Due to the nature of the battery, the battery levelwarning (Cor V) may appear early when thecamera is used in cold locations. Try warming thebatteries in your pocket or a similar location before use.
Depending on the battery type and the level of chargein the batteries, the camera may run out of power
without first displaying a battery level warning. This isparticularly likely to happen when batteries that haverun out of charge once are re-used.
Depending on the camera mode, the transition fromCto Vmay occur more quickly.
Use Fujifilm Battery charger (sold separately) to chargeAA-size Ni-MH batteries.
See p.98-99 for information on the batteries. When first purchased or if left unused for a long period,
the amount of time which AA-size Ni-MH batteries canbe used may be short. See p.99 for more information.
Battery power consumption varies greatly dependingon use. When you change to Playback mode fromPhotography mode,Cmay not occur, however, Vmay suddenly blink red and the camera may stopoperation.
L di h D Pi C d
8/10/2019 Manual a700 Eng
17/132
17
GettingReady
Loading the xD-Picture Card
Although you can store pictures in the cameras internalmemory, you can store many more images on the xD-Picture Card(sold separately). There is a slot for the xD-Picture Cardinside the battery compartment.
1 Open the battery cover.
2 Insert an xD-Picture Card.
3Close the battery cover.
How to replace the xD-Picture Card
Push the xD-Picture Cardinto the slot and then slowlyremove your finger. The lock is released and the xD-PictureCardis pushed out.
ContinuedQ
Gold marking
Gold contact area
Align the gold marking with thegold contact area and insert it
all the way into the slot.
8/10/2019 Manual a700 Eng
18/132
18
Loading the xD-Picture Card
CAUTION
When storing xD-Picture Cards, make sure that theyare kept out of the reach of children. An xD-PictureCardcould be swallowed and cause suffocation. If achild swallows an xD-Picture Card, seek medical
attention or call emergency number right away. If the xD-Picture Cardis oriented incorrectly, it will notgo all the way into the slot. Do not apply force wheninserting an xD-Picture Card.
Note that the xD-Picture Cardmay spring out if yourelease your finger quickly from the card immediatelyafter the lock is released.
Operation of this camera is only guaranteed when it isused with FUJIFILM xD-Picture Card.
See p.102 for information on the xD-Picture Card.
MEMO
The size of an image file varies depending on thesubject. For this reason, the number recorded may notrepresent the actual number of frames.
See p.117 for information on standard number ofavailable frames.
ZAbout internal memory
When an xD-Picture Card(sold separately) is inserted[Record images]: Record images to an xD-Picture
Card.[Playback images]: Playback images in an xD-Picture
Card.
When an xD-Picture Card(sold separately) is not
inserted[Record images]: Record images to internal memory.[Playback images]: Playback images in internal memory.
ZAbout images in the internal memory
Images held in the cameras internal memory may becorrupted or erased due to problems such as camerafaults. Save your important data to another media (i.e.,DVD-R, CD-R, CD-RW, hard disk, etc.).It is possible to transfer saved images on the internalmemory to an xD-Picture Card(p.56).
ISO200
6 FinePix A700 has internal memorythat can store images without xD-Picture Card.Yappears on theLCD monitor when internalmemory is active.
T i O d Off
8/10/2019 Manual a700 Eng
19/132
19
GettingRe
ady
Turning On and Off
Turning the camera on in
Photography mode
Changes between Photography mode and
Playback mode
Press wduring shooting to change to Playback mode.Press the shutter button down halfway to return toPhotography mode.
CAUTION
The lens moves and the lens cover opens when turningthe camera on in Photography mode. Take care not toobstruct the lens.
Take care not to get fingerprints on the camera lens asthis will result in impaired image quality in your shots.
Turning the camera on in
Playback mode
MEMO
To change to Photography mode, press the shutter button
down halfway.
POWER
Press POWER down fully
to turn the camera on.Press POWER again toturn the camera off.
MENU
DISP/
BACK
/OK
OPEN
Press wfor about 1
second to turn thecamera on in Playbackmode.Press POWER to turnthe camera off.
Setting the Date and Time
8/10/2019 Manual a700 Eng
20/132
20
Setting the Date and Time
When using the camera for the first time after purchasing,the date and time are cleared. Set the date and time.
1 DATE/TIME NOT SET message appears
when turning the camera on.
2Set the date and time.
MEMO
Holding downnorochanges the numberscontinuously.
When the time displayed passes 12, the AM/PMsetting changes.
Press MENU/OK to set the date andtime.
SET NO
DATE/TIME
NOT SET APressporqto select Year,Month, Day, Hour, or Minute.
BPressnoroto correct thesetting.
DATE/TIME
SET CANCEL
YY.MM.DD
2006 . 1 . 1
12 : 00 AM
8/10/2019 Manual a700 Eng
21/132
21
GettingRe
ady
3Change the date format.
Date format
YY.MM.DD: 2006.9.24MM/DD/YY: 9/24/2006DD.MM.YY: 24.9.2006
MEMO
DATE/ TIME NOT SET message also appears when thebatteries have been removed and the camera has beenleft for a long period.Once the AC power adapter has been connected or the
batteries have been installed for 30 minutes or more, thecamera settings will be retained for roughly 2 hours evenif both sources of power are removed.
When the Auto power off function is active, if the camerais left unused for 2 or 5 minutes, this function turns thecamera off (p.73). To turn the camera back on, pressPOWER. To play back images, hold down wfor about 1second.
SET CANCEL
DATE/TIME
MM/DD/YY
9 / 24 / 2006
10 : 00 AM
APressporqto select the dateformat.
BPressnoroto set the format.
CAlways press MENU/OK after thesettings are completed.
Auto power off function
Correcting the Date and Time
8/10/2019 Manual a700 Eng
22/132
22
Correcting the Date and Time
1 Open the SET-UP menu. 2Display the DATE/TIME screen.
APress MENU/OK to open themenu.
BPressporqto selectUOPTION.
CPressnoroto select SET-UP.
DPress MENU/OK to open theSET-UP menu.
OPTION
LCDSET-UP
APressporqto select option 3.
BPressoto select DATE/TIME.
CPressq.See 2Set the date and time.(p.20).
2 31 4
SET CANCEL
TIME DIFFERENCE/LANG.
USB MODE
:SET:SET:SET
SET-UP
DATE/TIME SET
Selecting the Language
8/10/2019 Manual a700 Eng
23/132
23
GettingRe
ady
Selecting the Language
1 Open the SET-UP menu. 2Select the language.
APress MENU/OK to open themenu.
BPressporqto selectUOPTION and then pressnoro
to select SET-UP.
CPress MENU/OK to open theSET-UP menu.
OPTION
LCDSET-UP
APressporqto move to option3.
BPressnoroto select.
CPressqto select ENGLISH,FRANCAIS, DEUTSCH,ESPAOL, ITALIANO, ,
, , ,, NEDERLANDS
or . Pressqto cyclethrough the language settings.
2 31 4
SET CANCEL
TIME DIFFERENCE
USB MODE
:SET
:SET
SET-UP
DATE/TIME :SET
/LANG. SET
Taking Pictures (a AUTO Mode)
8/10/2019 Manual a700 Eng
24/132
24
Taking Pictures (aAUTO Mode)
This section describes the basic operations.
1 Turn the camera on.Press POWER down fully to turn the camera on.
Holding the camera correctly
CAUTION
Moving the camera while shooting gives a blurredpicture (camera shake). Hold the camera steadily withboth hands.
If the lens or flash is obscured by your fingers or thestrap, subjects may be out of focus or the brightness(exposure) of your shot may be incorrect.
POWER
Brace your elbowsagainst your sides andhold the camera with
both hands.
Do not cover thelens or flash withyour fingers.
24
8/10/2019 Manual a700 Eng
25/132
25
U
singtheCamera
2Check the composition on the LCD monitor.To adjust zoom scale using the Zoom switch:
MEMO
Select eMacro mode to take close-up shots (p.40). Use digital zoom when you want to shoot the subject
closer (p.72).
3Focus on the main subject in the AF frameand press the shutter button down halfway.
CHECK
Focus on the subjectDouble beep is heardIndicator lamp lit green
Not focus on the subjectNo sound{indicatedIndicator lamp blinking green
MEMO
The shutter button has a halfway point at which focusand exposure are automatically optimized before takingthe picture by pressing fully down.
When pressing the shutter button halfway, a lensoperation sound may be heard.
ContinuedQ
66
Focal rangeApprox. 50 cm (1.6 ft.)to infinity
Optical zoom focallength (35 mmcamera equivalent)
Approx. 36 mm to108 mm Max. zoom scale
3
Zoom bar
]wide zoomswitch (Zoom out)
[tele zoomswitch (Zoom in)
6
AF frame AF framebecomes smallerand camerafocuses on thesubject.
Halfwaypressed
a
8/10/2019 Manual a700 Eng
26/132
26
Taking Pictures (aAUTO Mode)
4Press the shutter button fully.
CAUTION
When taking a picture using the flash, the image maydisappear and go dark briefly due to flash charging. TheIndicator lamp blinks orange during charging.
MEMO
When the subject is not in the AF frame, use AF/AE lockto take the picture (p.28).
When pressing the shutter button down fully in onemotion, the camera takes the picture without the AFframe changing.
Flash
Change the flash mode when you want to take pictures withoutflash. See p.41 for information on flash.
CAUTION
If F is selected for the quality setting, imagerecording time and time required between shotsincreases.
The image shown on the LCD monitor before thepicture is taken may differ in brightness, color, etc. fromthe image actually recorded. Play back the recordedimage to check it (p.31).
When selecting a slow shutter speed that will causecamera shake, |appears on the LCD monitor. Useflash or a tripod.
See p.104-107 for information on warning displays. SeeTroubleshooting (p.108-113) for more information.
ClickDoublebeep
Halfway pressed Fully pressed
When pressing the shutterbutton down halfway,bappears on the LCD monitor
before the flash fires.
8/10/2019 Manual a700 Eng
27/132
27
U
singtheCamera
Z Indicator lamp display
The indicator lamp shows camera status lit or blinkingwhen pressing the shutter button.
MEMO
Detailed warning messages appear on the LCD monitor
(
p.104-107).
Display Status
Lit green Locking the focusBlinking green AF/AE in progress, camera shake
warning, or AF warning (ready toshoot)
Blinking green andorange alternately
Recording to xD-Picture Cardorinternal memory (ready to shoot)
Lit orange Recording to xD-Picture Cardorinternal memory (not ready)
Blinking orange Charging flash (flash will not fire)
Blinking red Warnings for xD-Picture Cardandinternal memoryCard not formatted, incorrect format,memory full, xD-Picture Cardorinternal memory error
Lens operation error
Indicator lamp
Taking Pictures (a AUTO Mode)
8/10/2019 Manual a700 Eng
28/132
28
Taking Pictures (aAUTO Mode)
Taking pictures with the focus
and exposure locked
In the above composition, the subjects (two people in thiscase) are not in the AF frame. Pressing the shutter buttonhalfway at this point will result in the subjects being out offocus.
AF/AE lock is useful:
Use AF/AE lock to guarantee best result when shooting asubject that is not suited to autofocusing (p.29).
1 Move the camera slightly so that one of thesubjects is in the AF frame.
2Press the shutter button down halfway tofocus on the subject.
6
Using AF/AE lock
6
Doublebeep
Halfway pressed
8/10/2019 Manual a700 Eng
29/132
29
U
singtheCamera
3Continue to hold the shutter button downhalfway. Move the camera back to the
original image and press the shutter button
fully.
MEMO
AF/AE lock can be applied repeatedly before the shutteris released.
Use AF/AE lock in all Photography modes to guaranteeexcellent results.
On FinePix A700, pressing the shutter button downhalfway locks the focus and exposure settings (AF andAE lock).
Subjects not suitable for autofocus
FinePix A700 uses a high-precision autofocusing mechanism.However, it may have difficulty focusing on the following:
Subjects photographed through glass Subjects that do not reflect well, such as hair or fur Subjects with no substance, such as smoke or flames Dark subjects Subjects with little or no contrast between the subject and
the background (such as subjects dressed in the same coloras the background)
Shots where another high-contrast object (not the subject) isclose to the AF frame and is either closer or further awaythan your subject (such as a shot of someone against abackground with strongly contrasting elements)
For such subjects use AF/AE lock (p.28).
Click
Fully pressed
Very shiny subjects suchas a mirror or car body
Fast moving subjects
Taking Pictures (a AUTO Mode)
8/10/2019 Manual a700 Eng
30/132
30
Taking Pictures (aAUTO Mode)
Adjusting the shot composition
Select the LCD monitor display.
Position the main subject at the intersection of two lines inthis frame or align one of the horizontal lines with thehorizon. Use this frame as a guide to the subjects sizeand the balance of the shot while composing a shot.
MENU
DISP/
BACK
/OK
OPEN
6 6
Press DISP/BACK to
change the LCDmonitor display.
Text displayed
No text displayed
Framing guidelinedisplayed
Best framing
6
Viewing the Images
8/10/2019 Manual a700 Eng
31/132
31
U
singtheCamera
Playback your images to check them. For importantphotographs, always take a test shot and view the imageto make sure that the camera is working normally.
Setting the camera to Playback
mode
When the camera is off, pressw
for about 1 second toturn the camera on in Playback mode.
MEMO
When pressing w, the last image shot appears on theLCD monitor.
Select the LCD monitor display.
MENU
DISP/
BACK
/OK
OPEN
Press wduringshooting tochange toPlayback mode.
10:00 AM
100-0001
9/24/2006
MENU
DISP/
BACK
/OK
OPEN
Text displayed No text displayed
Multi-frameplayback
Press DISP/BACKduring Playbackmode to change theLCD monitor display.
Viewing the Images
8/10/2019 Manual a700 Eng
32/132
32
e g e ages
Single-frame playback
1 Zoom in / Zoom out.To zoom in an image during single-frame playback:
MEMO
Press DISP/BACK to cancel playback zoom.
2Display another part of the image.
To select the required image:
Pressp: last image
Pressq: next image
Selecting images
10:00 AM
100-0001
9/24/2006
To select images on the thumbnaillists screen, hold downporqfor 1 second during playback.When releasingporq, camerareturns to single-frame playback.
Playback zoom
CANCELPANNING
CANCELPANNING
]switch(Zoom out)
[switch(Zoom in)
Press[(n) or ](o) to zoomin or out on an image.
Zoom bar
CANCEL
Navigation screen(Current displayed image)
8/10/2019 Manual a700 Eng
33/132
33
UsingtheCamera
MEMO
Press DISP/BACK to return to the zoom setting.
Z Zoom scales
Multi-frame playback
Multi-frame playback screen (9 frames) appears on theLCD monitor. Select required frame from the 9 frames.
Still images viewable on FinePix A700
This camera will display still images recorded on FinePixA700 or still images (excluding some uncompressedimages) recorded on any FUJIFILM digital camera thatsupports xD-Picture Cards. Clear playback or playbackzooming may not be possible for still images shot oncameras other than FinePix A700.
APressporqto move toanother part of the image.
BPressn,o,p, orqto displayanother part of the image.
Quality mode Max. zoom scale
(3072 2304 pixels) Approx. 4.8
%(3264 2176 pixels) Approx. 4.54(2304 1728 pixels) Approx. 3.6
2(1600 1200 pixels) Approx. 2.5
APressn,o,p, orqto movethe cursor (colored frame) to theselecting frame.
Pressnororepeatedly tojump to the next page.
BPress MENU/OK to enlarge theimage.
oErasing the Images/Movies Setting the camera tow Playback mode(p.31)
8/10/2019 Manual a700 Eng
34/132
34
( p )
Use this mode to erase unnecessary images or movies tohave ample free space on the xD-Picture Cardor internalmemory.
Selecting FRAME or ALL
FRAMES
MEMO
To erase another frame (file), repeat above steps.When erasing frames (files) is completed, press DISP/BACK.
CAUTION
Pressing MENU/OK repeatedly erases consecutiveframes (files). Take care not to erase a frame (file) by
mistake.
APress MENU/OK to open thePlayback menu.
BPressporqto select oERASE.
CPressnoroto select FRAMEor ALL FRAMES.
DPress MENU/OK to confirm yourselection.
BACK
ALL FRAMES
FRAME
ERASE
Erasing one frame at a time (FRAME)
APressporqto select theerasing frame (file).
BPress MENU/OK to erase thecurrently displayed frame (file).
ERASE OK?
FRAME
100-0001
YES CANCEL
Setting the camera tow
Playback mode (p.31)
8/10/2019 Manual a700 Eng
35/132
35
UsingtheCamera
MEMO
MEMO
When using an xD-Picture Card, the images in the xD-Picture Cardare erased. When not using an xD-Picture Card, the images in the internal memory areerased.
Selecting:BACK returns to single-frame playbackwithout erasing any frames (files).
Protected frames (files) cannot be erased. Unprotectthe frames (files) before erasing them (p.54).
If DPOF SPECIFIED. ERASE OK? or DPOFSPECIFIED. ERASE ALL OK? appears, press MENU/OK again to erase the frames (files).
CAUTION
Erased frames (files) cannot be recovered. Back upimportant frames (files) onto your PC or another media.
Erasing all frames (ALL FRAMES)
Press MENU/OK to erase all theframes (files).
TAKE A WHILE
ALL FRAMES
100-0001
YES CANCEL
ERASE ALL OK?
IT MAY
CANCEL
ALL FRAMESPress DISP/BACK to cancelerasing of all the frames (files).Some unprotected frames(files) will be left unerased.
Using the Photography Functions Procedure of Setting
8/10/2019 Manual a700 Eng
36/132
36
Specify the camera settings for taking pictures to get thebest result. A general guide is given below.
1 Select the Photography mode.
Set the Photography mode from the menu.The camera settings are tailored to the scene beingshot.
2Specify the photography settings.Pressing buttons or selecting menu allows you tospecify photography functions. You can obtain thebest result for shooting.
Z Specifying functions using buttons
qAUTOThis is the easiest mode for takingpictures (p.38).
HPORTRAIT,LANDSCAPE.SPORT8NIGHT
Select the best Shooting mode for thescene being shot (p.38-39).
qMANUAL This mode provides detailed settings thatare impossible to set in qAUTO mode(p.39).
SHOOTING MODE
PORTRAIT
AUTO
MANUAL
MOVIE
eMacro Used for close-up shots (p.40).
dFlash Used for shots in dark locations or forbacklit subjects, etc. (p.41).
MENU
DISP/
BACK
/OK
OPEN
e (p) Macro button
d (q) Flash button
36
8/10/2019 Manual a700 Eng
37/132
37
AdvancedFeaturesPhotography
Z Specifying functions using Photography menu(MENU/OK button)
yQUALITY Use to specify required image size(p.45).
*SELF-TIMER
Used in situations such as group
shots where the photographer isincluded in the shot (p.46).
SISO Use to specify required sensitivitysetting (p.48).
SEVUse this setting to obtain the correctexposure (only s) (p.49).
TWB
Use this setting to adjust the colorbalance to suit the color of theambient light around the subject (only
s) (p.50).
SELF-TIMER
OFF
MENU
DISP/
BACK
/OK
OPEN
Setting the Shooting Mode
8/10/2019 Manual a700 Eng
38/132
38
You can select the most suitable setting according to thesubject by selecting one of the Shooting modes.
CHECK
See p.42 for information on available flash modes.
This is the easiest mode for providing crisp and clearshots.Use this mode for ordinary photography.
Camera specifies EV and WB settings automatically.
CHECK
Flash cannot be used in the Landscape mode.
APress MENU/OK to open themenu.
BPressporqto select qSHOOTING MODE.
CPressnoroto select Shootingmode.
DPress MENU/OK to confirm thesetting.
SHOOTING MODE
PORTRAITAUTO
MANUAL
MOVIE
qAUTO (a)
HPORTRAIT
Use this mode for photographyto get beautiful skin tones andsoft overall tone.
,LANDSCAPE
Use this mode for shootingscenery in daylight andprovides crisp, clear shots ofscenery such as buildings andmountains.
8/10/2019 Manual a700 Eng
39/132
eMacro (Close-up)
8/10/2019 Manual a700 Eng
40/132
40
Use this mode to take close-up shots.
Available Photography modes:aand s(p.38, 39)
CHECK
Focal rangeWide-angle: approx. 10 cm to 80 cm (3.9 in. to 2.6 ft.)Telephoto: approx. 35 cm to 80 cm (1.1 ft. to 2.6 ft.)
Effective flash rangeApprox. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)
MEMO
Use a tripod to prevent camera shake in Macro mode. Any of the following cancels Macro mode:
- Changing the Photography mode setting- Turning the camera off
6 eappears on the LCD monitorindicating that you can take
close-up shots.
MENU
DISP/
BACK
/OK
OPEN
Press e(p) toselect Macro mode.
Press e(p) againto cancel Macromode.
dSetting the Flash
8/10/2019 Manual a700 Eng
41/132
41
AdvancedFeaturesPhotography
Flash photography is useful for taking pictures at night orindoor dark locations. Choose from 6 flash modesaccording to the type of shot.
Available Photography modes:
a,H, .,8, s(p.38, 39)
MEMO
When pressing the shutter button down halfway,bappears on the LCD monitor before the flash fires.
Use this mode for ordinary photography.The flash fires as required by the shooting conditions.
This mode is suitable for shooting portraits in low-lightconditions.
Red-eye effect
When using the flash to take a picture of people in low-light conditions, their eyes sometimes appear red in thepicture. This is caused by the light of the flash reflectingoff the inside of the eye.
Use this mode in backlit scenes, or to get the correctcolors when taking a picture under bright lighting.
In this mode, the flash fires in bright as well as darkconditions.
MENU
DISP/
BACK
/OK
OPEN
The flash settingchanges each time youpress d(q).
AUTO Auto flash (not displayed)
bRed-eye reduction
Using this mode to minimize red-eye (eyesappear in red in the finished photo).
dForced flash
dSetting the Flash Available Photography modes: a,H, .,8, s(p.38, 39)
8/10/2019 Manual a700 Eng
42/132
42
This mode is suitable for situations where the flash cannotbe used.Use a tripod to prevent camera shake when shooting inSuppressed flash mode in the dark condition.Any time, flash does not fire.
This mode allows you to take pictures of people at nightthat clearly show both your subjects and the night timebackdrop. To prevent camera shake, always use a tripod.
Using nsynchronizes Red-eye reduction mode.
Using8selects slow shutter speeds of up to 2 seconds.
CAUTION
In bright scenes, overexposure may occur.
CHECK
List of available flash modes in each PhotographymodeThe following table shows the flash modes available foreach Photography mode.
Effective flash range (S: AUTO)Wide-angle: approx. 50 cm to 3.8 m (1.6 ft. to 12.5 ft.)Telephoto: approx. 60 cm to 2 m (2.0 ft. to 6.6 ft.)If you take pictures outside of the effective flash range,the image may appear dark even if the flash is used.
CAUTION
If pressing the shutter button while the flash is charging(Indicator lamp blinking orange), the picture will be
taken without the flash (when using AUTO orb
). The flash charging time may increase when thebatteries are low on charge.
When taking a picture using the flash, the image maydisappear and go dark briefly due to flash charging. TheIndicator lamp blinks orange during charging.
The flash fires several times (pre-flashes and the mainflash). Do not move the camera until the picture istaken.
Suppressed flash
cSlow synchro,nRed-eye reduction + Slow synchro
AUTO b d C c na
H
,
.
8
s
Photography Menu Operation
8/10/2019 Manual a700 Eng
43/132
43
AdvancedFeaturesP
hotography
Use the Photography menu to adjust image quality. Youcan take pictures in a wide range of conditions.
Setting the menus
APress MENU/OK to open the
menu.BPressporqto select the
menu.
CPressnoroto change thesetting.
DPress MENU/OK to confirm thesetting.
SELF-TIMER
OFF
Photography Menu Operation
Z
Setting the menus (p.43)
8/10/2019 Manual a700 Eng
44/132
44
Z List of photography menu options
Page Menu Functions SettingsFactorydefault
1
qSHOOTING
MODE (p.38)
Use this setting to provide the best photography menusetting for the scene being shot.
rMOVIE / qMANUAL /qAUTO/HPORTRAIT /
,LANDSCAPE / .SPORT /8NIGHT
qAUTO
yQUALITY (p.45)
This setting can be used with any of the modes.Specifies the image size.The larger image size, the better image quality is obtained.The smaller image size, the larger number of images arerecorded.
F / N /% / 4 / 2 /`
N
* SELF-TIMER(p.46)
This setting can be used with any of the modes.Used in situations such as group shots where thephotographer is included in the shot.
OFF / *(10 seconds) /((2 seconds)
OFF
UOPTION (p.68) Use this setting to change the camera settings. SET-UP /jLCD
2
S ISO (p.48)
This setting can be used with any of the modes.Specifies required sensitivity setting of the ambient lightaround the subject.The larger value of the sensitivity, the higher sensitivity isobtained. The higher sensitivity settings will allow you totake pictures in darker locations.
AUTO / 100 / 200 / 400 AUTO
SEV (p.49)This setting can be used when the Photography mode setsto qMANUAL (s).
Use this setting to obtain the correct exposure.
2 EV to +2 EV
(1/3 EV increments)
0
TWB (p.50)
This setting can be used when the Photography mode setsto qMANUAL (s).Use this setting to adjust the color balance to suit the colorof the ambient light around the subject.
AUTO / 6/ 7/ 9/ 0/-/ 8
AUTO
8/10/2019 Manual a700 Eng
45/132
Photography Menu Operation
T ki i t i lf ti
Setting the menus (p.43)
8/10/2019 Manual a700 Eng
46/132
46
Taking pictures using self-timer
(*SELF-TIMER)
Available Photography modes:a,H, ,, .,8, s(p.38, 39)
Use this menu in situations where the photographer isincluded in the shot.
When selecting the self-timer setting, the self-timer iconappears on the LCD monitor.
*: The picture is taken after 10 seconds.(: The picture is taken after 2 seconds.
1 Press the shutter button down halfway tofocus on the subject and press the shutter
button fully.
Pressing the shutter button down halfway that focuseson the subject.Without releasing the shutter button, press the buttonall the way down (fully pressed) to start the self-timer.
SELF-TIMER
OFF
Doublebeep Beep
Halfway pressed Fully pressed
2
Setting the menus (p.43)
8/10/2019 Manual a700 Eng
47/132
47
AdvancedFeaturesP
hotography
2Take pictures in selected time.Using the 2-second self-timer
This is useful when you worry about camera shake even ifattaching the camera on a tripod.
MEMO
To stop the self-timer, once it has started running, pressDISP/BACK.
Any of the following cancels the self-timer setting:- Completing the shooting- Changing the Photography mode setting- Setting the camera to Playback mode- Turning the camera off
Take care not to stand in front of the lens when pressing
the shutter button as this can prevent the correct focusor brightness (exposure) from being achieved.
8
A countdown appears onthe LCD monitor indicatingthe time remaining until thepicture is taken.
A picture is taken after the self-timer lamp changesfrom lit to blinking (only blinks with the 2-second self-timer).
Photography Menu Operation
Specifying sensitivity setting MEMO
Setting the menus (p.43)
8/10/2019 Manual a700 Eng
48/132
48
Specifying sensitivity setting
(S ISO)
Available Photography modes:a,H, ,, .,8, s(p.38, 39)
Use this menu to specify required sensitivity setting of theambient light around the subject.The larger value of the sensitivity, the higher sensitivity isobtained. The higher sensitivity settings will allow you totake pictures in darker locations.
CHECK
SettingsAUTO/100/200/400Selecting AUTO as the sensitivity setting, the cameraselects the best sensitivity setting for the subjectsbrightness.
The selected sensitivitysetting appears on the LCDmonitor when the sensitivitysetting is set to anothersetting excluding AUTO.
MEMO
Sensitivity is retained even when the camera is turned offor the mode setting is changed.
CAUTION
Although higher sensitivity settings will allow you to takepictures in darker locations, they will also increase theamount of speckling in your images. Choose thesensitivity setting that best suits the conditions.
400
200
100
ISO
AUTO
ISO 400
6
Adjusting exposure
Setting the menus (p.43)
8/10/2019 Manual a700 Eng
49/132
49
AdvancedFeaturesP
hotography
Adjusting exposure
compensation (S EV)
Available Photography mode: s(p.38,39)
Use this menu for shots to get the correct brightness(exposure), such as shots with extremely high contrastbetween the subject and the background.
CHECK
Compensation range: 2 EV to +2 EV(13 steps in 1/3 EV increments)
Explanation of Terms EV (p.118)
Guide to compensation
Backlit portraits:+2/3 EV to +1 2/3 EV
Very bright scenes (such assnowfields) and highly reflectivesubjects: +1 EV
Shots made up predominantly of sky: +1 EV Spotlit subjects, particularly against dark backgrounds: 2/3
EV Scenes with low reflectivity, such as shots of pine trees or
dark foliage: 2/3 EV
MEMO
Any of the following disables exposurecompensation:
Using the flash in AUTO or bmode Shooting dark scenes indmode
23
13
13
EV
+ /
+ /
- /
0
positive (+) compensation
negative () compensation
8/10/2019 Manual a700 Eng
50/132
Using Playback Menu
Use this menu to playback photographed images.
8/10/2019 Manual a700 Eng
51/132
51
AdvancedFeat
uresPlayback
Setting the menus DPOF set frame (uDPOF)
You can specify the image, number of prints, with orwithout date of printing with a DPOF-compatible printer.
Selecting WITH DATEE,Eappears on the LCDmonitor and the date will be imprinted on your prints.
ContinuedQ
p y p g p g
ASet the camera to Playbackmode (p.31).
BPress MENU/OK to open themenu.
CPressporqto select themenu.
DPressnoroto change thesetting.
EPress MENU/OK to confirm thesetting.
RESET ALL
WITHOUT DATE
WITH DATE
DPOFWITH DATEE : The date will be imprinted on your
prints.
WITHOUT DATE : The date will not be imprinted onyour prints.
RESET ALL : All DPOF settings will be canceled.
WITH DATE / WITHOUT DATE
DPOF :
SHEETS
100-0001
00009
01
FRAME
SET
Total number of prints
Setting for that frame
51
AdvancedFeat
uresPlayback
Using Playback Menu
MEMO Canceling DPOF settingAPressp orq to display the
Setting the menus (p.51)
8/10/2019 Manual a700 Eng
52/132
52
g g
APress MENU/OK to open the Playback menu.BPressporqto select uDPOF.CPressnoroto select WITH DATEEor WITHOUT
DATE and press MENU/OK.DPressporqto select the frame (file) with the DPOF
setting you want to cancel.EPressoto set the number of prints to 0 (zero).
To cancel the DPOF setting for another frame (file),repeat stepsDandE.Always press MENU/OK to complete the settings. DPOF ALL RESET (p.53)
MEMO
When DPOF settings were specified on another
camera.
When the data includes a frame (file) with DPOFsettings that were specified on another camera,
RESET DPOF OK? appears.Pressing MENU/OK erases all of the DPOF settingsalready specified for each frame (file). Specify theDPOF setting for each frame (file) again.
Prints of up to 999 frames (files) can be ordered on thesame xD-Picture Card.
DPOF settings cannot be specified for movies.
APressporqto display theframe (file) for specifying DPOFsetting.
BPressnoroto set a value.Up to 99 sheets are printed.
For frames (files) that you do notwant printed, set the number ofprints to 0 (zero).
To specify more DPOF settings, repeat stepsAandB.
CAlways press MENU/OK after thesettings are completed.Pressing DISP/BACK cancelsthose settings.
RESET DPOF OK?
100-0001
YES NO
CAUTION ZuHow to specify print options (DPOF)
Setting the menus (p.51)
8/10/2019 Manual a700 Eng
53/132
53
AdvancedFeaturesPlayback
Pressing DISP/BACK while choosing settings willcancel all current settings. If there were previous DPOFsettings, only the modifications are canceled.
When selecting the WITH DATE setting, the date isimprinted on your shots using the Print Service or a
DPOF-compatible printer (depending on the printerspecifications, the date may not be printed in somecases).
Images photographed with a camera other than FinePixA700 may not be specified DPOF settings.
To cancel all DPOF settings:
Select RESET ALL in the Playback menu (p.51).
MEMO
uappears on the LCD monitor during playback when the
image has specified DPOF settings.
RESET ALL
Press MENU/OK.
RESET DPOF OK?
100-0001
YES CANCEL
100-0001
10:00 AM9/24/2006
DPOF stands for Digital Print Order Formatand refers to a format that is used forrecording printing specifications for imagesshot using a digital camera on media such asan xD-Picture Card. The recorded
specifications include information on whichframes are to be printed.
This section gives a detailed description of how to orderyour prints with FinePix A700.
* Some printers do not support date and time imprintingor specification of the number of prints.
* The warnings shown below may appear while
specifying the prints.
DPOF SPECIFIED. ERASE OK ?DPOF SPECIFIED. ERASE ALL OK ? (p.35)When erasing the image, the DPOF setting for thatimage is deleted at the same time.
RESET DPOF OK ? (p.52)When inserting an xD-Picture Cardthat containsimages specified for printing by another camera,
those print specifications are all reset and replaced bythe new print specifications.
[DPOF FILE ERROR] (p.106)Up to 999 images can be specified on the samexD-Picture Card.
Using Playback Menu
Protecting the images SET ALL
Setting the menus (p.51)
8/10/2019 Manual a700 Eng
54/132
54
g g
(iPROTECT)
Use this mode to prevent frames (files) from beingaccidentally erased. Your camera calls images frames.
To protect or unprotect only the selected frame (file):
FRAME SET / RESET
APressporqto select theprotecting/unprotecting frame(file).
BPress MENU/OK to protect/unprotect the currently displayedframe (file).Unprotected: protecting frame(file)Protected: reset frame (file)
To protect another frame (file), repeat steps AandB.
When protecting frames (files) is completed, press DISP/BACK.
PROTECT OK?
100-0001
FRAME
YES CANCEL
Unprotected
100-0001
FRAME
UNPROTECT OK?
YES CANCEL
Protected ( appears)
SET ALL
Press MENU/OK to protect all theframes (files).
RESET ALL
Press MENU/OK to unprotect all theframes (files).
SET ALL
100-0001
YES CANCEL
TAKE A WHILE
SET ALL OK?
IT MAY
RESET ALL
100-0001
YES CANCEL
TAKE A WHILE
RESET ALL OK?
IT MAY
To stop the procedure midway Automatic Playback
Setting the menus (p.51)
8/10/2019 Manual a700 Eng
55/132
55
AdvancedFeaturesPlayback
If the images are very large, protecting or unprotecting allthe frames (files) may take some time.If you want to take a picture or record a movie during theprocedure, press DISP/BACK.
CAUTION
The Format function erases all the frames (files),including protected frames (files) (p.73).
(gPLAYBACK)
Use this mode to play back photographed imagescontinuously. You can select playback interval and type ofimage transition.
MEMO
To interrupt gPLAYBACK, pressnor MENU/OK. Pressporqto advance or go back through the
images. The Auto power off function (p.73) does not operate
during playback. Movie starts automatically. When the movie ends, the
playback function moves it on. Press DISP/BACK once during playback to display the
frame number and on-screen help.
100-0001
CANCEL
SET ALL
PLAYBACK
Using Playback Menu
Copying the images (VCOPY) Copying one frame at a time (FRAME)
Setting the menus (p.51)
8/10/2019 Manual a700 Eng
56/132
56
It is possible to transfer saved images between theinternal memory and an xD-Picture Card. Your cameracalls images frames.
Z Selecting COPY
MEMO
To copy another frame (file), repeat stepsCandD.When copying frames (files) is completed, press DISP/BACK.
APressnoroto selectWINTERNAL MEMORYCARD orXCARD INTERNAL MEMORY.
BPress MENU/OK to confirm thesetting.
COPY
INTERNAL MEMORY
CARD
NEXT CANCEL
Copying one frame at a time (FRAME)
APressnoroto select FRAME.
BPress MENU/OK.
CPressporqto select thecopying frame (file).
DPress MENU/OK to copy thecurrently displayed frame (file).
COPY
INTERNAL MEMORY
CARD
YES CANCEL
ALL FRAMES
FRAME
YES CANCEL
100-0001
COPY OK?
Recording voice memos
#Copying all frames (ALL FRAMES)
Setting the menus (p.51)
8/10/2019 Manual a700 Eng
57/132
57
AdvancedFeaturesPlayback
CAUTION When [\MEMORY FULL] or [YMEMORY FULL]
appears on the LCD monitor, exchanging the data stopson the way.
When copying the image that has specified DPOFsetting, the DPOF setting is not copied.
(#VOICE MEMO)
Voice memos of up to 30 seconds can be added to stillimages.
1 Set the menu.
ContinuedQ
py g ( )
APressnoroto select ALLFRAMES.
BPress MENU/OK.
CPress MENU/OK to copy all theframes (files).
COPY
INTERNAL MEMORY
CARD
YES CANCEL
FRAME
ALL FRAMES
YES CANCEL
100-0001
A WHILE
COPY ALL OK?
IT MAY TAKE
APressporqto select theimage to add a voice memo.
BPress MENU/OK to open thePlayback menu.
CPressporqto select#VOICE MEMO.
DPress MENU/OK.
ON
VOICE MEMO
8/10/2019 Manual a700 Eng
58/132
4Ending voice memos. Playing back voice memo
Setting the menus (p.51)
8/10/2019 Manual a700 Eng
59/132
59
AdvancedFeaturesPlayback
The voice memo ends when pressing MENU/OK midwayor 30 seconds pass.
To record your comment: press MENU/OK.To rerecorded the comment: press DISP/BACK .
MEMO
When the image already has a voice memoIf you select an image that already has a voice memo,a screen appears in which you can select whether torerecord the memo.
When [PROTECTED FRAME] appears, unprotect theframe (p.54).
Voice memos cannot be added to movies. ContinuedQ
VOICE MEMO
REC RE-REC
FINISH
VOICE MEMO
RE-REC
APressporqto select animage file with a voice memo.#appears on the LCD monitor.
BPressoto start playing back
voice memo.The playback time appears onthe LCD monitor along with aprogress bar.
PLAY
STOP PAUSE
Progress bar
Using Playback Menu
Z Playing back voice memos CAUTION
C t l D i ti
Setting the menus (p.51)
8/10/2019 Manual a700 Eng
60/132
60
CHECK
Audio recording format:WAVE ( p.118) PCM recording format
Audio file size:Approx. 480 KB (for a 30-second voice memo)
Playing voice memo files
You may not be able to play back some voice memo filesrecorded on other cameras.
Control Description
PlaybackPlayback begins.The voice memo stops whenplayback ends.
Pause /Resume
Pauses the voice memo duringplayback. Pressoagain toresume playback.
Stop
Stops playback.Pressporqwhile voicememo playback is stopped to goback to the previous file oradvance to the next filerespectively.
Fastforward /Rewind
Pressporqduring playbackto skip forwards or backwardsthrough the voice memo. Thesebuttons do not function whileplayback is paused.
Uncover the speaker.The sound may bedifficult to hear.
Speaker
Trimming (YTRIMMING) 2Specify trimming part of image.
Setting the menus (p.51)
8/10/2019 Manual a700 Eng
61/132
61
AdvancedFeatu
resPlayback
Use this mode to trim the required part of thephotographed image.
1 Select the menu.
MEMOPress DISP/BACK to return to single-frame playback.APressporqto select thetrimming frame (file).
BPress MENU/OK to open thePlayback menu.
CPressporqto select YTRIMMING.
DPress MENU/OK.
TRIMMING
SET
BPressporqto move to
another part of the image.
CPressn,o,p, orqto displayanother part of the image.
MEMO
Press DISP/BACK to return to the zoom setting.
DPress MENU/OK.
PANNING
YES CANCEL
TRIMMING
PANNING
YES CANCEL
TRIMMING
switch switch
APress [(n) or ](o) tozoom in or out on an image.
Zoom bar
YES CANCEL
TRIMMING Navigation screen(Current displayed image)
ContinuedQ
Using Playback Menu
3Record the image.
Setting the menus (p.51)
8/10/2019 Manual a700 Eng
62/132
62
MEMO A saved image size varies depending on the zoom
scale of step 2. For 0.3 M,kYES option appears inyellow.
Image sizes
When%quality setting is selected, the image istrimmed to normal size (4:3 aspect ratio).
CAUTION
You may not be able to trim images that were shot with acamera other than FinePix A700.
Check the saved image size andpress MENU/OK.The trimmed image is added as aseparate file in the final frame.
TRIMMING
REC CANCEL
0. 3MREC OK?
4Printing at up to 6R (15.2 20.3 cm/6 8 in.) /A5 size
2Printing at up to 4R (10.2 15.2 cm/4 6 in.) /A6 size
` To use for e-mail or web site
rRecording Movies
Use this mode to record movies with sound. Z Zooming the image
You must zoom beforehand as you cannot zoom during
8/10/2019 Manual a700 Eng
63/132
63
AdvancedFeaturesMovie
1 Set the camera to rMovie mode.y g
recording.
CHECK
Optical zoom focal lengthApprox. 36 mm to 108 mm (35 mm camera equivalent)Max. zoom scale: 3
Focal rangeApprox. 50 cm (1.6 ft.) to infinity
ContinuedQ
APress MENU/OK to open themenu.
BPressporqto select qSHOOTING MODE.
CPressnoroto select rMOVIE.
DPress MENU/OK to confirm thesetting.
SHOOTING MODE
MANUAL
MOVIE
AUTO
PORTRAIT
12s
STANDBY
The available recording timeappears on the LCDmonitor.
12s
STANDBY
Zoom bar
Press [(n) or ](o) to zoomin or out on an image.
63
AdvancedFeaturesMovie
rRecording Movies
2Record movies. MEMO The brightness and color of the LCD monitor shown
8/10/2019 Manual a700 Eng
64/132
64
Press the shutter button down fully to start recording.During recording, lREC and a counter that shows theremaining time appear on the LCD monitor.
MEMO
There is no need to hold down the shutter button duringrecording.
Recording movies
Specifications: Motion JPEG (p.118) with monauralsound
Quality selection method:$(320 240 pixels)#(160 120 pixels)
Frame rate (p.118): 10 frames per second (fixed)
during movie recording may differ from those shownbefore recording begins.
Pressing the shutter button down fully fixes the focus,however the exposure and white balance are adjusted
to the scene being shot. If recording is stopped immediately after it begins, 1second of the movie is recorded onto the xD-PictureCardor internal memory.
CAUTION
Because a movie is recorded onto the xD-Picture Cardor internal memory as it is saved, it cannot be recordedcorrectly if the camera suddenly loses power (if thebatteries run out or the AC power adapter is
disconnected). A movie file taken by FinePix A700 may not be playableon other cameras.
Because sound is recorded concurrently with theimages, make sure that you do not cover themicrophone with a finger, etc. (p.12).
Camera operation noises may be recorded duringmovie shooting.
12sREC
Fully pressed
Recording ends when pressingthe shutter button downhalfway during recording or theremaining time runs out.
Halfway pressed
8/10/2019 Manual a700 Eng
65/132
wPlaying Back Movies Setting the cameratowPlayback mode (p.31)
Fast Pressporqduring playback
Control Description
8/10/2019 Manual a700 Eng
66/132
66
Z Playing back movies
MEMO
If the subject of the shot is very bright, white verticalstreaks or black horizontal streaks may appear in theimage during playback. This is normal.
CAUTION You may not be able to play back some movie files
recorded on other cameras. To play back movie files on a PC, save the movie file on
the xD-Picture Cardor internal memory to the PCshard disk and then play back the saved file.
Uncover the speaker. The sound is difficult to hear.
APressporqto select themovie file. rappears on theLCD monitor.
BPressoto begin playing backmovie.
Control Description
PlaybackPlayback begins.Playback stops when the end ofthe movie is reached.
Pause /Resume
Pauses the movie duringplayback.Pressoagain to resumeplayback.
Stop
Stops playback.Pressporqwhile playbackis stopped to go back to theprevious file or advance to the
next file respectively.
PLAY
30s
PAUSESTOP
The playback time appears on
the LCD monitor along with aprogress bar.
Progress bar
asforward /Rewind
essp o q du g p aybacto skip forwards or backwardsthrough the movie.
Skipplayback
Pressporqwhen the movie
is paused, the movie advancesor goes back one frame.Hold downporqto movethrough the frames quickly.
Adjusting LCD Brightness or Playback Volume
MEMO
The options available in theUmenu vary depending onwhether the mode is selected
OPTION
8/10/2019 Manual a700 Eng
67/132
67
Settings
whether the mode is selected. Photography mode
Movie mode
Playback mode
APress MENU/OK to open themenu.
BPressporqto selectUOPTION.
CPressnoroto selectjLCDor VOLUME.
DPress MENU/OK to display thesetting display.
EPressporqto adjust the LCDmonitor brightness or playbackvolume.
FPress MENU/OK to confirm thesetting.
LCD
SET-UP
VOLUME
SET CANCEL
BRIGHTNESS
OPTION
LCDSET-UP
LCD
SET-UP
OPTION
OPTION
LCD
SET-UP
VOLUME
67
Settings
U
SET-UP
Using the SET-UP menu
1 O h SET UP
2Change the setting.
8/10/2019 Manual a700 Eng
68/132
68
1 Open the SET-UP menu.
APress MENU/OK to open themenu.
BPressporqto selectU
OPTION.
CPressnoroto select SET-UP.
DPress MENU/OK to display theSET-UP menu.
OPTION
LCDSET-UP
APressporqto move tooptions 1 to 4.
BPressnoroto select a menuoption.
CPressporqto change thesetting.When selecting FORMAT,DATE/TIME, TIMEDIFFERENCE, , USBMODE, DISCHARGE, orRESET, pressqto specify eachsetting.
DPress MENU/OK to confirm thesetting.
SET-UP
IMAGE DISP.
FRAME NO.BEEP VOLUME
2 31 4
:ON
SHUTTER VOL :LOW
:CONT.:LOW
SET CANCEL
SET-UP menu option
Setting Display Factory default Explanation Page
How to use the SET-UP menu (p.68)
8/10/2019 Manual a700 Eng
69/132
69
Settings
Setting Display Factory default Explanation Page
1
IMAGE DISP. ON/OFF ON
Specifies whether an image checking screen(photography result) appears after taking a picture.The image is displayed for a few moments and then
recorded. The color tones in images recorded maydiffer from actual color. Play back the recordedimages to check them.
SHUTTER VOL LOW/HIGH/OFF LOW Sets the volume of the sound emitted when theshutter operates.
BEEP VOLUME LOW/HIGH/OFF LOW Sets the volume of the tone emitted when thecamera controls are used.
FRAME NO. CONT./RENEW CONT.Specifies whether frame numbers are assignedconsecutively from previous numbers or begin
again.
71
2
DIGITAL ZOOM ON/OFF OFF Specifies whether digital zoom is used together. 72
AUTO POWER OFF 2 MIN/5 MIN/OFF 2 MINSets the time of turning camera off when camera isnot used.
73
LCD POWER SAVE ON/OFF ON Darkens the LCD monitor when camera is not used. 73
FORMAT OK Initializes an xD-Picture Cardor internal memory.Select this menu to erase all the frames (files).
73
ContinuedQ
USET-UP
DATE/TIME SET Corrects the date or time. 22
Setting Display Factory default Explanation Page
How to use the SET-UP menu (p.68)
8/10/2019 Manual a700 Eng
70/132
70
3
TIME DIFFERENCE SET Specifies the time difference settings. 74
SET Specifies the language used for LCD monitordisplay. 23
USB MODE SET
@DSCProvides a simple way to read images from an xD-Picture Cardor internal memory and store imagesonto an xD-Picture Card.
88
8/10/2019 Manual a700 Eng
71/132
71
Settings
p yassigned consecutively from previous numbers or beginagain.
CHECK
duplicated when images are downloaded to a PC. When the camera settings are RESET (p.70), the
frame number setting (CONT. or RENEW) is changedto CONT. and the frame number i tself does not return to0001.
In CONT. setting, images are stored beginning from thehighest file number on the current xD-Picture Cardwhen the xD-Picture Cardalready contains image fileswith file numbers higher than the highest file number onthe last xD-Picture Card.
File number runs from 0001 to 9999. Once 9999 isexceeded, the directory number changes from 100 to101. The maximum number is 999-9999.
The displayed frame number may differ for images
photographed on other cameras.
* Formatted xD-Picture Cardor internal memory usedfor both A and B.
CONT. : Pictures are stored beginning from the highestfile number stored on the last xD-Picture Cardor internal memory used.
RENEW: Pictures are stored on each xD-Picture Cardbeginning with a file number 0001.
A
B
CONT. RENEW
100-0009
10:00 AM9/24/2006
File number
Frame number
Directory number
The last 4 digits of the 7-digit number in the top rightcorner of the LCD monitor are the file numbers, whilethe first 3 digits show the directory number.
USET-UP
Use this function to shoot enlarged images than
CHECK
Optical zoom focal length*Approx. 36 mm to 108 mm
DIGITAL ZOOM
How to use the SET-UP menu (p.68)
8/10/2019 Manual a700 Eng
72/132
72
maximum optical zoom scale.
Z Zoom bar display
Digital zoom focal length*Approx. 108 mm to 680 mm,max. zoom scale: approx. 6.3
Digital zoom focal length (%)*Approx. 108 mm to 583 mm,max. zoom scale: approx. 5.4
* 35 mm camera equivalents
MEMO
When zooming changes between optical and digital, theposition of the indicator stops. Press the same Zoomswitch again to start the indicator moving again.
CAUTIONUsing the digital zoom allows you to enlarge your subjectand shoot it. However, it will lower your image quality. Setthe digital zoom when requiring it.
6
Zoom bar
Digital zoom OFF Digital zoom ON
Optical zoom: 3
Optical zoom: 3
*Approx. 5.4 (Digital zoom) when the
yQUALITY is set to%.
Digital zoom:approx. 6.3 *
When this function is active and the camera remains Initialize (format) the xD-Picture Cardor internal memory
AUTO POWER OFF FORMAT
How to use the SET-UP menu (p.68)
8/10/2019 Manual a700 Eng
73/132
73
Settings
unused for 2 or 5 minutes, it turns camera off.Use this function when you want to get the maximumpossible running time from your batteries.
CAUTION
The Auto power off function is disabled during automaticplayback (p.55), discharging rechargeable batteries(p.100), and when a USB connection (p.78, 88) isbeing used.
To restore power to the camera
Refer to Turning On and Off (p.19).
The LCD monitor darkens when camera is not used for 10seconds.When this function is active, you can save power and getthe maximum possible running time from your batteries.
MEMO
Pressing any button wakes the camera up.
CAUTION
The LCD power save function is disabled during Playbackmode and Movie mode.
for use with the camera.
CHECK
Initializing internal memory takes about 15 seconds.
CAUTION
The Format function erases all the frames (files),including protected frames (files).
Back up important frames (files) onto your PC oranother media. Do not open the battery cover during formatting, as
formatting will be interrupted.
LCD POWER SAVE
APressporqto select OK.
BPressing MENU/OK initializes
the xD-Picture Cardor internalmemory.
FORMAT OK?
ERASE ALL DATA
CANCELOK
SET
FORMAT Place of initializeYFORMAT:Internal memory
\FORMAT:xD-Picture Card
USET-UP
Use this function when traveling to destinations indiff t ti Thi f ti t ti diff
2Select TIME DIFFERENCE.TIME DIFFERENCE
TIME DIFFERENCE
How to use the SET-UP menu (p.68)
8/10/2019 Manual a700 Eng
74/132
74
different time zones. This function sets a time differencerelative to the date and time currently set. When thissetting is enabled, the specified time difference is applied
when pictures are taken.1 Use Time difference function.
Pressporqto change betweenNHOME andILOCAL.To set the time difference, selectILOCAL.
NHOME: Your home time zone
ILOCAL: Your destination timezone
TIME DIFFERENCE
TIME DIFF SET
LOCATION HOME
10:00 AM9/24/2006
SET CANCEL
APressnoroto select TIMEDIFF.
BPressq.
LOCATION LOCAL
10:00 AM9/24/2006
SET CANCEL
TIME DIFF SET
3Set time difference. CHECKUpon returning from a trip, always change the timedifference setting back toNHOME and then check thedate and time again
How to use the SET-UP menu (p.68)
8/10/2019 Manual a700 Eng
75/132
75
Settings
CHECK
Available time setting23:45 to +23:45 (in 15-minute increments)
MEMO
date and time again.
APressporqto select +/,hour, and minute.
BPressnoroto change thesetting.
CAlways press MENU/OK after thesettings are completed.
10:00 AM9/24/2006
SET CANCEL
TIME DIFFERENCE
+ 00 : 00
6
9/24/2006
In the time difference setting,when you change to thePhotography mode,Iandthe date is displayed for 3seconds, the date displayturns yellow.
Connecting to a TV
When connecting to a TV, images can be displayed on wider screen. Using Automatic playback function (p.55) together, youcan have fun with folks.
8/10/2019 Manual a700 Eng
76/132
76
Plug the A/V cable (included) intothe A/V OUT (audio/visual
output) socket of the camera.
Plug the other end of the cable into theaudio/video input socket on the TV.
CAUTION
Plug the A/V cable (included) and the AC power adaptercorrectly and push them in each terminal.
See p.100 for the information of the AC power adapter.
MEMO
When connecting the A/V cable to TV, the LCD monitoris turned off.
The image quality for movie playback is lower than forstill images.
Refer to the instructions provided with your TV for moreinformation on audio/video input for your TV.
Use the AC-3VX (sold separately) when FinePix A700is connected to a TV for long periods.
AC-3VX(sold separately)
To video (yellow)
input socket
To audio (white)
A/V OUTsocket
76
Connecting Camera Directly to Printer PictBridge Function
When a printer that supports PictBridge isavailable, images can be printed byconnecting the camera directly to thePictBridge-compatible printer without a
FPressporqto move to option3.
8/10/2019 Manual a700 Eng
77/132
77
CameraConnection
g p pPC.
Before connecting to a printer
APress wfor about 1 second toturn the camera on in Playbackmode.
BPress MENU/OK to open themenu.
CPressporqto selectUOPTION.
DPressnoroto select SET-UP.
EPress MENU/OK to open theSET-UP menu.
OPTION
LCD
VOLUME
SET-UP
GPressnoroto select USBMODE.
HPressq.
IPressnoroto select
8/10/2019 Manual a700 Eng
78/132
78
cable (mini B).
MEMO
Use the AC-3VX (sold separately) when FinePix A700 isconnected to a printer for long periods.
CThe following screen appears on the LCD monitor aftera moment.
MEMO
If the screen of stepCdoes not appear, check whetherthe USB MODE setting is
8/10/2019 Manual a700 Eng
79/132
79
CameraConnection
)
MEMO
Even if MENU/OK is pressed with total number of images setat 0 (zero), the image that is displayed is printed once.
Printing with date
CAUTION
PRINT WITH DATEEis not available when the camerais connected to a printer that does not support dateprinting.
APressporqto display theframe (file) for specifying PRINTsetting.
BPressnoroto set a value.
Up to 99 sheets are printed.
To specify more PRINT settings, repeat stepsAandB.
CPress MENU/OK to display theconfirm setting.
SHEETS
100-0001
02
FRAME
OK SET
TOTAL: 00002
DPress MENU/OK again todownload the data to the printerand start printing the specifiednumber of prints.
PRINT OK?
YES CANCEL
APress DISP/BACK to displaythe setting display.
BPressnoroto selectPRINT WITH DATEE.
CPress MENU/OK.
PICTBRIDGE
SET BACK
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
Connecting Camera Directly to Printer PictBridge Function
Printing with DPOF setting
(u PRINT DPOF)PRINT DPOF
TOTAL : 19SHEETS
8/10/2019 Manual a700 Eng
80/132
80
CHECK
To select uPRINT DPOF, the DPOF settings must bespecified on FinePix A700 beforehand (p.51).
CAUTION
Even when WITH DATEEis specified in the DPOFsettings (p.51), the date is not inserted on printers thatdo not support date printing.
MEMO
Press DISP/BACK to cancel the printing.Depending on the printer, the printing may not becanceled immediately or printing may stop midwaythrough.When printing stops midway, briefly turn the camera offand then on again.
APress DISP/BACK to open themenu.
BPressnoroto selectuPRINT DPOF.
CPress MENU/OK to display theconfirm setting.
PICTBRIDGE
SET BACK
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
DPress MENU/OK again todownload the data to the printerand start printing the specifiedframes (files) continuously.
PRINT DROF OK?
YES CANCEL
CANCEL
PRINT DPOF
PRINTING
Disconnecting the printer
ACheck that PRINTING is not displayed on thecameras screen.
8/10/2019 Manual a700 Eng
81/132
81
CameraConnection
BTurn the camera off. Unplug the USB cable (mini-B).
MEMO
DPOF setting can be specified for images on internalmemory.
CAUTION
In PictBridge function, images photographed on otherthan a camera may not be printed.
Do not connect to a PC when the USB MODE setting isset to
8/10/2019 Manual a700 Eng
82/132
82
*1 Models with one of the above operating systems pre-installed.*2 When you install the software, login using a system administrator account (e.g. Administrator).*3 Required to use the FineP