8/3/2019 Pedal Acelerador Electronico556

http://slidepdf.com/reader/full/pedal-acelerador-electronico556 1/3

Electronic Accelerator Pedal Assembly

Typical Application: Accelerator Pedal for Electronic ThrottleControl Systems

Features / Benefits:

• Dual Output Electrical Sensor Integrated into Pedalassembly

• Dual Load/Return Force Generation

• Self Adjusting Hysteresis Control

• Compact Size

• Optional Metal Mounting Inserts

• Kickdown Option

• Six Pin Connector Typical

• Optional Metal or Plastic Pedal Arm (per CustomerRequirements)

• Optional Customization to your Specific ApplicationRequirements

TYPICAL SPECIFICATIONS

ELECTRICAL

Linearity (ABS): See Figure No.1

Rotation (Electrical): 21.6°

Rotation (Mechanical): 22.3°

Typical Voltage: 5 VDC

Over Voltage: 18 VDC

Track Correlation: See Figure No.3 (Page 2)

MECHANICAL

Return Spring Torque: See Figure No.2

Stop Strength: 400 N

Mounting Bolt Torque: M6, 8 Nm

DURABILITY

Operating Temp. Range: -30°C to 85°C

Life (Multi-Strokes -30°C to 80°C):2 X 106 Cycles

Vibration: 5 to 100 Hz @ 0.2 to 1.6 g – 8 Hours

Thermal Shock: -30°C to 85°C: 40 Shocks

ENVIRONMENTAL

Salt Spray: 48 Hours (5% NaCl)

Humidity: 125 Hours @ 95% RH

Sealing: Per IP54

NOTE: These standard specifications have been met on existing production-tooled units that aretested on precise test equipment. Details are available including failure criteria. This data sheetdoes not constitute a warranty that the product will meet the above specifications while used inyour application or attached to your test equipment.

 5  5  6   S e

r i   e s 

HEADQUARCTS Automotive Pro

1142 W. BeardsleElkhart, IN 4651

Tel: 574-295Fax: 574-295

www.ctscor

SALES OF – N. A

CTS Automotive Pro

Southfield, MTel::248-359Fax: 248-359

 – ECTS Corporation U

High Blantyre, GlSc

Tel: +44 (0)1698 5Fax: +44 (0)1698 5

 – FaCTS Japa

Kanagawa-ku, Yoko

Tel: (81) 45-450Fax: (81) 45-450

Date: Revised: 1

CTS®

8/3/2019 Pedal Acelerador Electronico556

http://slidepdf.com/reader/full/pedal-acelerador-electronico556 2/3

Application Notes  5  5  6   S  er i   e s 

 

HEADQUARCTS Automotive Pro

1142 W. BeardsleElkhart, IN 4651

Tel: 574-295Fax: 574-295

www.ctscor

SALES OF

 – N. ACTS Automotive ProSouthfield, MTel: 248-359

Fax: 248-359

 – ECTS Corporation U

High Blantyre, GlSc

Tel: +44 (0)1698 5Fax: +44 (0)1698 5

 – FaCTS Japa

Kanagawa-ku, Yoko

Tel: (81) 45-450Fax: (81) 45-450

Date: Revised: 1

Electrical Output Characteristic

Figure No. 1

92%

84%

88% 

15% 

7.5% 

16%

14%

Output No. 1

Output No. 2

44% 

70 N 

35 N 

18 N 

17.5 N 

>5 N 

0° 18°

Mech.

Travel  Full gas manual 

Full gas 

automatic 

Kickdown Area 

Mechanical Output Characteristic

Figure No. 2

21.6 

0% 21.6°18 0°

Mech.Travel 

End stop 

manual End stop 

automatic 

VS /VO

8/3/2019 Pedal Acelerador Electronico556

http://slidepdf.com/reader/full/pedal-acelerador-electronico556 3/3

Dimensional Details (mm) & Standard Electrical Output

 5  5  6   S  e

r i   e s 

HEADQUARCTS Automotive Pro

1142 W. BeardsleElkhart, IN 4651

Tel: 574-295Fax: 574-295

www.ctscor

SALES OF

 – N. ACTS Automotive ProSouthfield, MTel: 248-359

Fax: 248-359

 – ECTS Corporation U

High Blantyre, GlSc

Tel: +44 (0)1698 5Fax: +44 (0)1698 5

 – FaCTS Japa

Kanagawa-ku, Yoko

Tel: (81) 45-450Fax: (81) 45-450

Date: Revised: 1

PIN CONFIGURATION

PIN No. DESIGNATION1 PPS 22 +5V PPS23 +5V PPS14 PPS15 GROUND PPS16 GROUND PPS2

Signal 2 required defined with respect to Signal 1Signal 1 Signal 2Supply 1 Supply 2

Tracking value as per Figure 3 shown

-2

100%

Track CorrelationFigure No. 3

0% 15%

1%

2%

3%

Mechanical Travel

Tracking