Poleas en Milimetros

CA6001Effective Date:February 2011

METRIC PRODUCT CATALOG

www.baldor.com www.maskapulleys.com

When you need to connect !

index

sHEAVEs

Adjustable Speed V-Belt pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 Fixed Bore SPZ, SPA, SPB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6

ELAsTOMERIC ELEMENT COUPLINGs General Couplings Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Maska Starflex: Elastomeric jaw type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-10 4-Flex: Elastomeric gear type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-16

Page #

nOTe: All dimensions are subject to change without prior notice.

Baldor is pleased to present their line of BaldorMaska Metric Sheaves and Elastomeric Element Couplings designed for the European market. These durable products are produced in conformity with MPTA & AGMA standards, and ISO9001 certified production operations.

Metric dimension power transmission components are commonly found in European-designed equipment in the Air handling (HVAC), Textile, Pump and Agriculture industries, as well as small equipment of all types. The feature ready-to-install ensures rapid installation - a notable advantage in the case of premounted replacement parts or assembly-line operations.

The fixed bore series of SPA and SPZ products are also available in imperial sizes. Please consult our regular Product Catalog or E-catalog; both can be viewed on-line at www.maskapulleys.com.

The BaldorMaska line of inventory of metric standard products ranges from 38mm to 1800 mm. In addition, we manufacture for a large variety of OEM markets with made-to-order PT parts in both grey and ductile cast iron.

POWERING INDUSTRY TODAY & TOMORROW

iSO9001-2008

2SH

EA

VE

SAdjustAble speed V-belt pulleys

Adjustable Speed V-belt Pulleys (Z, SPZ, A, SPA, B, SPB V-BeLTS)

Technical Data Sheet: 8000 SERIES Both 1 & 2 groove adjustable sheaves permit variations of as much as 30% in speed.

Adjustable speed V-belt pulleys are used primarily in the Air Handling industry. Optimal fan working speed is easily obtained by simply adjusting the one pulley.

V-Belt Pulley Adjustment

Modify the pitch diameter by rotating the adjustable flange on the threaded hub of the V-Belt Pulley. One complete turn of one of the flanges equals a diameter variation. If required for more precision, the two flat surfaces found on the threaded hub allow for half turn adjustments. Once the required diameter is obtained, tighten the adjusting screw(s) on one of the two flat surfaces.

To obtain the same pitch diameter in both grooves of the D8000 series, tighten both movable flanges against the central flange then rotate both flanges the same number of turns.

Part No. Key Tighten-

ing screw De

(L.T.B.) L1

Pr

ebor

e

Bores (mm) Weight

(kg) (approx.)

8325 4 1 83 45 9 9 -11 - 14 - 19 - 20 -24 - 28 0.64 8350 4 1 96 45 9 9 - 11 - 14 - 19 - 20 - 24 - 28 0.91 8400 4 1 106 45 12.7 12.7 - 14 - 19 - 20 - 24 - 28 1.27 8450 4 2 121 45 12.7 12.7 - 14 - 19 - 20 - 24 -25 - 28 1.36 8550 4 2 136 45 12.7 12.7 - 14 - 19 - 20 - 24 - 28 - 38 - 42 1.82

8600 4 2 153 45 12.7 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 35 - 38 - 42 2.27

8670 4 2 171 45 12.7 12.7 - 19 - 20 - 24 - 25 -28 - 38 - 42 2.72 8740 4 2 188 45 12.7 12.7 - 14 - 24 - 28 - 38 - 42 3.18

Ordering Information: 1 Groove

Applications with a speed superior to 25 meters/sec. may require more accurate balancing.

EXAMPLE: 8600X12.7MM

8600 X12.7MM8600: SHEAVE SIZEX12.7MM: BORE SIZE (12.7mm) Metric bore sizes are designated with MM

after the metric dimension (X12.7MM).

HOW TO ORDER

3SH

EA

VE

S

AdjustAble speed V-belt pulleys

Part No. Key Tighten-

ing screw De

(L.T.B.) L2

Pr

ebor

e

Bores (mm) Weight

(kg) (approx.)

D8325 4 1 83 85 12.7 24 - 28 1.36 D8350 4 1 96 85 12.7 28 1.82 D8400 4 1 106 85 12.7 14 - 19 -24 - 28 2.27 D8450 4 2 121 85 12.7 12.7 -14 - 19 - 24 - 25 -28 2.72

D8550 4 2 136 85 12.7 12.7 - 14 - 19 - 24 - 28 - 30 - 38 - 40 - 42 3.63

D8600 4 2 153 85 12.7 12.7 - 14 - 19 - 24 - 28 - 35 - 38 - 40 - 42 4.53

D8670 4 2 171 85 12.7 12.7 - 24 - 28 - 35 - 38 - 42 5.44 D8740 4 2 188 85 12.7 12.7 - 24 - 28 - 38 - 42 6.35

Ordering Information: 2 Grooves

V-Belt Pulley Features

Part No. dpDe L1 A1 B1 L2 A2 B2

Flange Thread Pitch

Adjusting screws*

Tightening screws*

Weight (approx.)

1 groove 2 grooves Min. Max. No 1

groove2

grooves

8325 D 8325 13 28 83 45 8.5 13 76 35 30 1.59 1 7.94 1 7.94 0.64 1.36

8350 D 8350 13 28 96 45 10 15 76 35 30 1.59 1 7.94 1 7.94 0.91 1.82

8400 D 8400 13 28 106 45 10 15 85 35 30 1.59 1 7.94 1 7.94 1.27 2.27

8450 D 8450 13 28 121 45 10 15 85 35 30 1.59 2 180 7.94 2 120 7.94 1.36 2.72

8550 D 8550 13 42 136 45 10 15 85 35 30 2.12 2 180 7.94 2 120 7.94 1.82 3.63

8600 D 8600 13 42 153 45 10 15 85 35 30 2.12 2 180 7.94 2 120 7.94 2.27 4.53

8670 D 8670 13 42 171 45 10 15 85 35 30 2.12 2 180 7.94 2 120 7.94 2.72 5.44

8740 D 8740 13 42 188 45 10 15 85 35 30 2.12 2 180 7.94 2 120 7.94 3.18 6.35

* Cup point screws, key 4 mm dp variation for 1 rotation of the movable flange

Pitch circle possible depending on type of belt usedPart No. Z SPZ A SPA B SPB

1 groove 2 grooves min. max. min. max. min. max. min. max. min. max. min. max.

8325 D 8325 58 78 63 79 60 76 - - - - - -

8350 D 8350 60 81 65 82 62 89 70 91 66 87 74 89

8400 D 8400 70 91 75 92 72 99 80 101 76 97 84 99

8450 D 8450 86 106 91 107 88 114 95 116 91 113 99 115

8550 D 8550 101 122 105 123 102 129 110 131 106 127 114 129

8600 D 8600 117 138 122 139 119 146 127 148 123 144 131 146

8670 D 8670 135 156 140 157 137 164 145 166 141 162 149 164

8740 D 8740 153 174 158 175 155 181 162 182 158 178 166 180

4SH

EA

VE

S

Light duty Fixed bore Sheaves(SPZ/Z Belts)

Technical Data Sheet: 1SPZ Bored with standard keyway Statically balanced Groove profile conform to ISO 9001-2008 standard Grey cast iron, painted blue

Bore tolerance+ 0.05

- 0Keyway following:

NF-E 22-175

Part No . O.D. shaft

L M T* Bores (mm) (kg)

Weight (approx.) min. max.

1sPZ63 67 12.7 30 30.2 49.5 1B 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.45

1sPZ67 71 12.7 30 30.2 49.5 1B 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.50

1sPZ71 75 12.7 30 30.2 49.5 1B 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.55

1sPZ75 79 12.7 30 30.2 49.5 1B 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.59

1sPZ80 84 12.7 30 30.2 49.5 1B 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.68

1sPZ85 89 12.7 30 30.2 49.5 1W 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.73

1sPZ90 94 12.7 30 30.2 49.5 1W 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.73

1sPZ95 99 12.7 30 30.2 49.5 1W 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.91

1sPZ100 104 12.7 30 30.2 49.5 1W 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.86

1sPZ106 110 12.7 30 30.2 49.5 1W 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.91

1sPZ112 116 12.7 30 33.4 49.5 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.00

1sPZ118 122 12.7 30 33.4 49.5 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.05

1sPZ125 129 12.7 30 33.4 49.5 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.14

1sPZ132 136 12.7 30 33.4 48.8 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.07

1sPZ140 144 12.7 30 33.4 49.5 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.14

1sPZ150 154 12.7 30 33.4 50.5 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.32

1sPZ160 164 12.7 30 33.4 50.8 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.36

1sPZ170 174 12.7 30 33.4 50.8 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.50

1sPZ180 184 12.7 30 33.4 50.5 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.55

1sPZ200 204 12.7 38 33.4 58.4 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28- 30 - 35 - 38 1.68

1sPZ224 228 12.7 38 33.4 58.4 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28- 30 - 35 - 38 1.91

1sPZ250 254 12.7 38 33.4 58.4 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28- 30 - 35 - 38 2.36

1sPZ280 284 12.7 38 33.4 58.4 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28- 30 - 35 - 38 2.73

1sPZ315 319 12.7 38 33.4 58.4 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28- 30 - 35 - 38 3.09

1 Groove

* Type: A = arms; B = block; W = web

OD

OD

light duty Fixed bore

1sPZ85X14MM

1sPZ85 X14MM

1sPZ85: SHEAVE SIZEX14MM: BORE SIZE (14mm) Metric bore sizes are designated

with MM after the metric dimension (X14MM).

HOW TO ORDER

5SH

EA

VE

S

Light duty Fixed bore Sheaves 1 and 2 Grooves for SPA/A Belts

Technical Data Sheet: 1SPA and 2SPA Bored with standard keyway Statically balanced Groove profile conform to ISO 4183 - 1989 standard Grey cast iron, painted blue

Bore tolerance+ 0.05

- 0Keyway following:

NF-E 22-175

Part No. O.D. shaft



1sPA75 80.5 12.7 30 30.6 49.5 1B 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.59

1sPA80 85.5 12.7 30 30.6 49.5 1B 12.7 - 14 - 19 - 20 - 24 -25 -28 - 30 0.64

1sPA85 90.5 12.7 30 30.6 49.5 1B 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.73

1sPA90 95.5 12.7 30 30.6 49.5 1B 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.73

1sPA95 100.5 12.7 30 30.6 49.5 1W 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.82

1sPA100 105.5 12.7 30 30.6 49.5 1W 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.86

1sPA106 111.5 12.7 30 30.6 49.5 1W 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 0.95

1sPA112 117.5 12.7 30 35.4 49.5 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.00

1sPA118 123.5 12.7 30 35.4 49.5 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.05

1sPA125 130.5 12.7 30 35.4 49.5 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.14

1sPA132 137.5 12.7 30 35.4 48.8 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.09

1sPA140 145.5 12.7 30 35.4 49.5 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.14

1sPA150 155.5 12.7 30 35.4 50.8 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.32

1sPA160 165.5 12.7 30 35.4 50.8 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.36

1sPA170 175.5 12.7 30 35.4 50.8 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.50

1sPA180 185.5 12.7 30 35.4 50.8 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 1.55

1sPA200 205.5 12.7 38 35.4 58.4 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 - 35 - 38 1.68

1sPA224 229.5 12.7 38 35.4 58.4 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 - 35 - 38 1.91

1sPA250 255.5 12.7 38 35.4 58.4 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 - 35 - 38 2.36

1sPA280 285.5 12.7 38 35.4 58.4 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 - 35 - 38 2.77

1sPA315 320.5 12.7 38 35.4 58.4 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 - 35 - 38 3.77

1sPA355 360.5 12.7 38 35.4 58.4 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 - 35 - 38 3.86

1sPA400 405.5 12.7 38 35.4 58.4 2A 12.7 - 14 - 19 - 20 - 24 -25 - 28 - 30 - 35 - 38 4.68

1 Groove



EXAMPLE: 1sPA85X14MM

1sPA85 X14MM

1sPA85: ShEAVE SIZE

X14MM: BOre SIze (14MM) Metric bore sizes are designated

with MM after the metric dimension (X14MM).

HOW TO ORDER

6SH

EA

VE

S

Part No. O.D. shaft



2sPA75 80.5 12.7 30 41.3 49.5 3B 12.7 - 14 - 19 - 20 - 24 -25 -28 - 30 0.95

2sPA80 85.5 12.7 30 41.3 49.5 3B 12.7 - 14 - 19 - 20 - 24 -25 -28 - 30 1.09

2sPA85 90.5 12.7 30 41.3 49.5 3B 12.7 - 14 - 19 - 20 - 24 -25 -28 - 30 1.14

2sPA90 95.5 12.7 30 41.3 49.5 3B 12.7 - 14 - 19 - 20 - 24 -25 -28 - 30 1.23

2sPA95 100.5 12.7 30 39.7 49.5 3B 12.7 - 14 - 19 - 20 - 24 -25 -28 - 30 1.32

2sPA100 105.5 12.7 30 39.7 49.5 3W 12.7 - 14 - 19 - 20 - 24 -25 -28 - 30 1.50

2sPA106 111.5 12.7 30 42.8 49.3 3W 12.7 - 14 - 19 - 20 - 24 -25 -28 - 30 1.86

2sPA112 117.5 12.7 30 39.7 53.8 3W 12.7 - 14 - 19 - 20 - 24 -25 -28 - 30 1.60

2sPA118 123.5 12.7 30 39.7 49.5 3W 12.7 - 14 - 19 - 20 - 24 -25 -28 - 30 1.91

2sPA125 130.5 12.7 30 39.7 49.5 3W 12.7 - 14 - 19 - 20 - 24 -25 -28 - 30 2.00

2sPA132 137.5 12.7 42 39.7 64.8 3W 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 2.00

2sPA140 145.5 12.7 42 39.7 64.8 3W 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 2.27

2sPA150 155.5 12.7 42 39.7 64.8 3A 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 2.41

2sPA160 165.5 12.7 42 39.7 64.8 3A 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 2.45

2sPA170 175.5 12.7 42 39.7 64.8 3A 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 2.64

2sPA180 185.5 12.7 42 39.7 64.8 3A 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 2.77

2sPA200 205.5 12.7 42 39.7 64.8 3A 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 3.77

2sPA224 229.5 12.7 42 39.7 64.8 3A 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 3.82

2sPA250 255.5 12.7 42 39.7 64.8 3A 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 4.14

2sPA280 285.5 12.7 42 39.7 64.8 3A 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 5.14

2sPA315 320.5 12.7 42 40.5 64.8 3A 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 6.36

2sPA355 360.5 12.7 42 40.5 64.8 3A 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 6.64

2sPA400 405.5 12.7 42 40.5 64.8 3A 12.7 - 14 - 19 - 20 -24 - 25 - 28 - 30 - 35 -38 - 40 - 42 7.95

2 Grooves



elAstomeric element couplings

CO

UP

LIN

GS

7

COUPLinGSGENERAL CHARACTERISTICS

Starflex 4-Flex

Torque (N.m) 0.4 - 703.6 6.8 - 5340.5Max. kW/100 RPM 7.4 13.4

Torsional wind-up (deg.) - 7o - 15o

Angular misalignment (deg.) 1/2o - 1o 1/4o - 1o

Parallel misalignment (mm) 0.254 - 0.381 0.254 - 1.016Axial permissiveness - limited compressibility

Sizes available 035 - 225 3 - 13

Elements available

Nitrile Rubber (NBR)EPDM

Urethan

HytrelHytrel

Bronze

MASKA STARFLex: eLASTOMeRiC JAw TyPe COUPLinGS

The most commonly used elastomeric coupling for a wide variety of light to medium-duty applications .

Product Features High torque capability easy Installation Misalignment capability No metal-to-metal contact

STOck BOre cOuplING EXAMPLE: L099X14MM

L099 X14MM

L099: MASkA STArFleX HuB SIze

X14MM: BOre SIze (14MM)Metric bore sizes are designated with MM after the metric dimension (X14MM).

HOW TO ORDER

eleMeNT MATerIAl EXAMPLE: L099-100H

L099-100 H

L099-100: MASkA STArFleX element size (insert)

H : MATerIAl (HyTrel)

To order a complete coupling, (2) hubs with appropriate bore and (1) insert have to be ordered.

elAstomeric element couplingsC

OU

PLIN

GS

8

ELEmENT CHARACTERISTICS

PropertiesTemperature

Range

MisalignmentShore

HardnessDampening

CapacityChemical

ResistanceColourAngular

DegreeParallel

mmNBR (Rubber) Nitrile Butadiene Rubber is an elastomeric element that is oil resistant with the resilience and elasticity of natural rubber.

Most economical and widely-used element.

-40 to +100C 1 0.381 80A HIGH GOODBLACK

Urethane -- Urethane has 1.5 more torque capability than NBR, provides less dampening effect and has good resistance to oil and chemicals.

Not recommended for cyclic or start-stop applications.

-34 to +71 C 1 0.381

55DL050-L110

90-95AL150-L225

LOW VERY GOODORANGE

Hytrel -- Hytrel is a pliant elastomer suited to high torque / tem-perature operations. Notable resistance to oil and chemincals

Not recommended for cyclic or start-stop applications.-51 to 121 C 1/2 0.381 55D LOW EXCELLENT

BEIGE

Bronze -- Bronze is a metal insert designed exclusively for slow speed operations that require high torque. (Maximum 250 RPM)

Resistant to extreme environments (temperature, water, oil, dirt).-40 to +232C 1/2 0.254 -- NIL EXCELLENT

GOLD

HubNo. Type

OutsideDiameter

A

Hub Diameter

HD

Overall Length

B

Distance between flanges

C

Length thru bore

D

BoreAssy Wt. kg (Avg)Min. Max.

L050 * 1 27 - 44 12 16 10 mm 12 mm 0.11L070 1 35 - 51 13 19 11 mm 19 mm 0.23L075 1 45 - 54 13 21 12 mm 22 mm 0.41L090 1 55 - 54 13 21 8 mm 25 mm 0.61L095 1 55 - 64 13 25 11 mm 28 mm 0.70L099 1 65 - 72 18 27 14 mm 30 mm 1.02L100 1 65 - 88 18 35 12 mm 35 mm 1.27L110 1 84 - 108 22 43 16 mm 42 mm 2.70L150 1 95 - 114 25 44 16 mm 48 mm 3.59L190 2 114 102 127 25 51 19 mm 55 mm 6.27L225 2 127 108 137 25 56 30 mm 65 mm 7.86

HubNo.

Set Screws Tightening torque NmQty

Size

Metric SeriesL050 2 M4-0.7 5.1L070 2 M6-1 8.8L075 2 M6-1 8.8L090 2 M6-1 8.8L095 2 M8-1.25 9L099 2 M8-1.25 16.9L100 2 M8-1.25 16.9L110 2 M10-1.5 25.4L150 2 M10-1.5 29.4L190 2 M12-1.75 61L225 2 M12-1.75 61

DImENSIONS

WRENCH TORqUE TO TIGHTEN SCREWS

*Important: NOT SOLD INDIVIDUALLY. These parts are packaged 4 to a box.

TYPE 1

C

D

B

A

TYPE 2

C

A

D

B

HD


CO

UP

LIN

GS

9

COUPLinG RATinGS & MiSALiGnMenT

Parallel misalignment Figure 1

Angular misalignment Figure 2

GAPGAP

ANGLE

X max.

X min.

ANGLE

X min.

X max.

Bore (mm)

Keyway (mm)

L035 L050 L070 L075 L090 L095 L099 L100 L110 L150 L190 L2254 No KW POR 5 No KW POR POR 6 No KW POR POR 7 No KW POR POR POR 8 No KW POR POR POR 9 3 x 1.4 POR POR POR

10 No KW POR POR POR 10 3 x 1.4 X POR POR POR 11 4 x 1.8 X X POR POR 12 No KW POR POR POR 12 4 x 1.8 X X X POR POR POR 14 No KW POR POR POR POR 14 5 x 2.3 POR X X POR POR POR X 15 No KW POR POR POR POR POR 15 5 x 2.3 POR X X POR POR POR POR 16 5 x 2.3 POR X X X POR POR X POR POR 17 5 x 2.3 POR POR X POR POR POR POR 18 6 x 2.8 POR POR POR POR POR X POR 19 No KW POR POR 19 6 x 2.8 X X X X POR POR X POR 20 6 x 2.8 X X X POR X POR POR POR 22 6 x 2.8 X X X X POR POR POR 24 8 x 3.3 X X X X X X POR 25 8 x 3.3 X X X X X X POR 28 No KW POR POR 28 8 x 3.3 X X X X X POR 30 8 x 3.3 POR X X POR POR POR32 No KW POR POR POR32 10 x 3.3 POR X X POR POR35 No KW POR POR POR35 10 x 3.3 X X X X X38 10 x 3.3 X X X POR40 12 x 3.3 POR POR POR POR42 12 x 3.3 X X X POR45 14 x 3.8 X POR POR48 No KW POR 48 14 x 3.8 X X X50 No KW POR POR50 14 x 3.8 X POR POR55 No KW POR POR55 16 x 4.3 X X60 No KW POR60 18 x 4.4 X65 No KW 65 18 x 4.4 POR

mETRIC SERIES: STANDARD BORES AND KEYWAYS

X = Stock POR = Price on Request


OU

PLIN

GS

10

Hub Size

Element Material

Max RPMkW per 100 RPM Service Factor Torque

(Nm)

Max. parallel

misalignment (mm)

Max. angular

misalignment (mm)1.0 1.5 2.0 2.5 3.0

L050 NBR 18000 0.031 0.021 0.016 0.013 0.010 3 0.38 0.46L070 14000 0.051 0.034 0.026 0.021 0.017 4.9 0.38 0.56L075 11000 0.107 0.071 0.054 0.042 0.036 10.2 0.38 0.76L090 9000 0.170 0.113 0.085 0.068 0.057 16.3 0.38 0.89L095 9000 0.230 0.153 0.115 0.092 0.077 21.9 0.38 0.89L099 7000 0.377 0.251 0.189 0.151 0.125 35.9 0.38 1.02L100 7000 0.494 0.329 0.247 0.198 0.165 47.1 0.38 1.02L110 5000 0.937 0.625 0.469 0.375 0.312 89.5 0.38 1.40L150 5000 1.467 0.978 0.734 0.587 0.489 140.1 0.38 1.65L190 5000 2.045 1.363 1.02 0.818 0.682 195.2 0.38 1.90L225 4200 2.769 1.846 1.385 1.107 0.923 264.4 0.38 2.16

NBR - (NITRILE BUTADIENE RUBBER) ELEmENT mATERIAL

Hub Size

Element Material


(Nm)

Max. parallel

misalignment (mm)

Max. angular

misalignment (mm)1.0 1.5 2.0 2.5 3.0

L050 Urethane 18000 0.046 0.031 0.023 0.019 0.016 4.4 0.38 0.46L070 14000 0.077 0.051 0.039 0.031 0.025 7.3 0.38 0.56L075 11000 0.160 0.107 0.080 0.064 0.053 15.2 0.38 0.76L090 9000 0.256 0.171 0.128 0.102 0.085 24.4 0.38 0.89L095 9000 0.345 0.230 0.172 0.138 0.115 32.9 0.38 0.89L099 7000 0.564 0.377 0.283 0.226 0.188 53.9 0.38 1.02L100 7000 0.740 0.494 0.371 0.296 0.247 70.7 0.38 1.02L110 5000 1.406 0.937 0.703 0.562 0.468 134.2 0.38 1.40L150 5000 2.201 1.467 1.101 0.880 0.734 210.1 0.38 1.65L190 5000 3.067 2.045 1.534 1.227 1.022 292.9 0.38 1.90L225 4200 4.153 2.769 2.077 1.661 1.384 396.6 0.38 2.16

URETHANE - ELEmENT mATERIAL

Hub Size

Element Material


(Nm)

Max. parallel

misalignment (mm)

Max. angular

misalignment (mm)1.0 1.5 2.0 2.5 3.0

L050 Hytrel 18000 0.059 0.040 0.023 0.024 0.019 5.6 0.38 0.30L070 14000 0.135 0.090 0.068 0.054 0.045 12.9 0.38 0.30L075 11000 0.268 0.179 0.134 0.107 0.089 25.6 0.38 0.38L090 9000 0.474 0.316 0.237 0.189 0.158 45.3 0.38 0.46L095 9000 0.664 0.442 0.332 0.265 0.221 63.4 0.38 0.46L099 7000 0.937 0.625 0.469 0.375 0.312 89.5 0.38 0.56L100 7000 1.342 0.894 0.671 0.537 0.447 128.1 0.38 0.56L110 5000 2.684 1.789 1.342 1.074 0.895 256.2 0.38 0.76L150 5000 4.387 2.925 2.194 1.755 1.462 418.9 0.38 0.84L190 5000 5.538 3.692 2.769 2.215 1.846 528.8 0.38 1.02L225 4200 7.369 4.913 3.684 2.948 2.456 703.7 0.38 1.12

HYTREL - ELEmENT mATERIAL

Hub Size

Element Material


(Nm)

Max. parallel

misalignment (mm)

Max. angular

misalignment (mm)1.0 1.5 2.0 2.5 3.0

L050 Bronze 250 0.059 0.040 0.030 0.024 0.019 5.6 0.01 0.30L070 250 0.135 0.090 0.068 0.054 0.045 12.9 0.01 0.30L075 250 0.268 0.179 0.134 0.107 0.089 25.6 0.01 0.38L090 250 0.474 0.316 0.237 0.189 0.158 45.3 0.01 0.46L095 250 0.664 0.442 0.332 0.265 0.221 63.4 0.01 0.46L099 250 0.937 0.625 0.469 0.375 0.312 89.5 0.01 0.56L100 250 1.342 0.894 0.671 0.537 0.447 128.1 0.01 0.56L110 250 2.684 1.789 1.342 1.074 0.895 256.2 0.01 0.76L150 250 4.387 2.925 2.194 1.755 1.462 418.9 0.01 0.84L190 250 5.538 3.692 2.769 2.215 1.846 528.8 0.01 1.02L225 250 7.369 4.913 3.684 2.948 2.456 703.7 0.01 1.12

BRONZE - ELEmENT mATERIAL

NOTE: Angular misalignment is the difference between X min and X max. refer to Figure 2 on previous page


CO

UP

LIN

GS

11

4-FLex: eLASTOMeRiC GeAR TyPe COUPLinGS

Technical Features Bores are machined to ISO tolerance H7 Over 745 .67 kw @ 1750 rpm S flanges are bored to size B flanges are mounted with a QD bushing

General Characteristics: Sizes available 3-13 Torque (Nm) 6 .78 - 5340 .57 Torsional wind-up 7 - 15 parallel misalignment (mm) 0 .25 - 1 .02 Sleeve elements: 1-piece, 2-piece &

epDM & Hytrel split format

TyPEs s 4-FLEX

COUPLING FLANGEs Available in different bore

sizes to fit on standard shafts

Most flanges have a keyseat and all are supplied with 2 setscrews

HOW TO ORDERFlANGe EXAMPLE: 5sX24MM

EXAMPLE: 8B-sH

5: 4FleX FlANGe SIzes: 4FleX FlANGe TypeX24MM: BOre SIze (24MM)

8: 4FleX FlANGe SIzeB: 4FleX FlANGe TypesH: QD BuSHING SIze

5 X24MMs

8 sHB

eleMeNT MATerIAl EXAMPLE: 9JEs

5JEs

9: 4FleX eleMeNT SIzeJEs: eleMeNT MATerIAl AND cONSTrucTION

(epDM SplIT - S STANDS FOr SplIT)

TyPE B 4-FLEX COUPLING FLANGEs

Fits with our QD bushing for easy installation & removal

Secure mounting without setscrews


OU

PLIN

GS

12

TyPe S COUPLinG FLAnGe

Flange Size

Dimensions (mm) Bores *Wt. (Kg)C D E G H L T X Min Max

5S 34.131 82.55 11.509 18.256 47.625 71.437 15.081 24.606 14 32 0.506S 41.275 101.6 13.494 22.225 63.5 88.9 19.844 27.781 15 38 0.867S 46.831 117.475 17.462 25.4 71.437 100.012 19.844 33.337 19 42 1.188S 53.181 138.43 19.05 28.575 82.55 112.712 23.019 38.1 24 39 2.009S 61.119 161.29 19.844 36.512 98.425 128.587 26.194 44.45 24 54 3.09

10S 69.056 190.5 20.637 41.275 111.125 144.462 30.956 50.8 24 60 4.7711S 87.312 219.075 28.575 47.625 133.35 180.97 38.1 60.325 24 80 7.5512S 101.6 254 32.544 58.737 146.05 209.55 42.862 68.262 32 90 12.0913S 111.125 298.45 33.35 68.275 171.45 234.95 50.013 77.80 --- ---

DImENSIONS

* Approximate weight for each flange. All finished bores come with 2 set screws.

Note: can be used with any sleeve types.

Flange Size

Stock Bores (mm)14 15 16 19 20 24 25 28 30 32 35 38 42 45 48 50 55 75 80 85

5S X X X

6S X X X X X

7S X X X X X

8S X X

9S X X X X X

10S X X X

11S X X X X X

12S X X X

13S X


CO

UP

LIN

GS

13

TyPe B COUPLinG FLAnGe

nOTe: not to be used with hytrel sleeves.

IMPORTANT REMINDER

DImENSIONS

Flange Size

Bush. Size

Max. Bore (mm)

Dimensions (mm) *Wt. (Kg.)

C1 C2 D E F G L T X Flange Bush.

6B JA 28 32.147 25.4 101.6 13.097 50.8 22.225 86.519 19.05 27.781 0.64 0.18

7B JA 28 32.941 25.4 117.475 13.097 50.8 25.4 91.281 19.844 33.337 0.86 0.18

8B SH 40 50.006 31.75 138.43 15.875 68.262 28.575 106.362 23.019 38.1 1.32 0.41

9B SD 42 58.737 46.037 161.29 17.462 80.962 36.512 123.825 26.194 44.45 2.18 0.73

10B SK 60 51.594 47.625 190.5 20.637 98.425 41.275 144.462 30.956 50.8 3.55 1.23

11B SF 65 58.737 50.8 219.075 20.637 117.475 47.625 165.1 38.1 60.325 5.45 1.77

12B E 80 73.819 66.675 254 28.575 152.4 58.737 201.612 42.862 68.262 8.18 3.86

13B F 100 99.219 92.075 298.45 30.956 168.275 68.2625 230.187 50.006 76.2 14.18 6.05

L

D

C1

T E

DC2

F

Maximum bore with keyseat * Approximate weight for each flangeBushing

sizes stock Bore

(mm)Keyseat Key

JA

14 15 16 18 19 20 22 24 25 28

5 x 2.36 x 2.88 x 2.3**8 x 1.3**

5 x 5 6 x 6 8 x 6** 8 x 5**

SH

14 15 16 18 19 20 22 24 25 28 30 32 35 38 40

5 x 2.36 x 2.88 x 3.310 x 3.310 x 2.3**No. k.s.

5 x 5 6 x 6 8 x 7 10 x 8 10 x 7** No K.S.

SD

14 15 16 18 19 20 22 24 25 28 30 32 35 38 40 42

5 x 2.36 x 2.88 x 3.310 x 3.312 x 3.3

5 x 5 6 x 6 8 x 7 10 x 8 12 x 8

SK

14 15 16 18 19 20 22 24 25 28 30 32 35 38 40 42 45 48 50 55 60

5 x 2.36 x 2.88 x 3.310 x 3.312 x 3.314 x 3.816 x 4.318 x 3.4**

5 x 5 6 x 6 8 x 7 10 x 8 12 x 8 14 x 9 16 x 10 18 x 10**

SF

25 28 30 32 35 38 40 42 45 48 50 55 60 65

8 x 3.310 x 3.312 x 3.314 x 3.816 x 4.318 x 4.4

8 x 7 10 x 8 12 x 8 14 x 9 16 x 10 18 x 11

E

35 38 40 42 45 48 50 55 60 65 70 75 80

10 x 3.312 x 3.314 x 3.816 x 4.318 x 4.420 x 4.922 x 5.4

10 x 8 12 x 8 14 x 9 16 x 10 18 x 11 20 x 12 22 x 14

F

45 48 50 55 60 65 70 75 80 85 90 95 100

14 x 3.816 x 4.318 x 4.420 x 4.922 x 5.425 x 5.4No. k.s.

14 x 9 16 x 10 18 x 11 20 x 12 22 x 14 25 x 14 No K.S.

Additional bore sizes available upon request.

Also available Bushings Hard MetricA QD bushing with metric set screws and bolts for your custom projects. See Baldor-Maska general catalog for more details


OU

PLIN

GS

14

eLeMenT ChARACTeRiSTiCS

JE HS H

JES E E (exploded)

SHAPES AVAILABLE EPDM HYTREL

1 pc, unsplit JE H

1 pc, split JES -

2 pieces E HS

TYPICAL USE General Purpose General Purpose

REL. RATING 1X 4X

WIND-UP ANGULAR 15 7

MISALIGNMENT 1 0.25

TEMPERATURE

maximum +135 C. +121 C.

minimum - 34.4 C. - 53.8 C.

SLEEVE TYPES


CO

UP

LIN

GS

15

Part # Part #Coupling

SizeD

(mm)W

(mm)Wt. (Kg)

3JE 3JES 3 47.625 25.4 0.034JE 4JES 4 58.737 31.75 0.055JE 5JES 5 74.612 39.687 0.096JE 6JES 6 95.25 47.625 0.187JE 7JES 7 110.331 55.562 0.288JE 8JES 8 128.587 63.5 0.519JE 9JES 9 152.4 76.2 0.6610JE 10JES 10 179.387 87.312 1.0511E --- 11 207.962 101.6 2.3212E --- 12 242.887 119.062 3.6813E --- 13 284.162 139.7 5.91

DImENSIONS

B FLANGES J, S FLANGES

JE & JES

1. SLEEVE 2. FLANGE 3. BUSHING

ePdM eLeMenT - TyPeS Je, JeS, e

E

Flange Size

EPDM Element

Max. RPM

kW PER 100 RPM

Torque (Nm)

E (mm)

Allow. Misalignment

(mm)Service Factor

1.0 1.5 2.0 2.5 3.0 Parallel Angular3 JE, JES 9200 0.07 0.05 0.04 0.03 0.02 6.78 30.2 0.254 0.8894 JE, JES 7600 0.15 0.10 0.07 0.06 0.05 13.56 38.1 0.254 1.0925 JE, JES 7600 0.30 0.20 0.15 0.12 0.10 27.12 49.2 0.381 1.4226 JE, JES 6000 0.52 0.35 0.26 0.21 0.17 50.84 60.3 0.381 1.7787 JE, JES 5250 0.89 0.60 0.45 0.36 0.30 81.91 65.1 0.508 2.0578 JE, JES 4500 1.34 0.90 0.67 0.54 0.45 128.24 74.6 0.508 2.3889 JE, JES 3750 2.16 1.44 1.08 0.86 0.72 203.37 88.9 0.635 2.76910 JE, JES 3600 3.43 2.29 1.71 1.37 1.14 324.83 103.2 0.635 3.25111 E 3600 5.37 3.58 2.68 2.15 1.79 511.82 123.8 0.813 3.83512 E 2800 8.50 5.67 4.25 3.40 2.83 813.49 144.5 0.813 4.44513 E 2400 13.42 8.95 6.71 5.37 4.47 1282.38 168.3 1.016 4.953

COUPLING RATINGS & mISALIGNmENT

W

D

W

D

hyTReL eLeMenT - TyPeS h, hS

Part # Part #Coupling

SizeD

(mm)W

(mm)Wt. (Kg)

6H 6HS 6 95.25 47.62 0.207H 7HS 7 110.33 55.56 0.318H 8HS 8 128.59 63.5 0.649H 9HS 9 152.4 76.2 0.8210H 10HS 10 179.39 87.31 1.3211H 11HS 11 207.96 101.6 2.0512H 12HS 12 242.89 119.1 3.32

- 13HS 13 284.16 139.7 5.36

DImENSIONS

Flange Size

Hytrel Sleeves

Max. RPM

kW PER 100 RPMTorque (Nm)

E (mm)

Allow. Misalignment

(mm)Service Factor

1.0 1.5 2.0 2.5 3.0 Parallel Angul.6 H, HS 6000 2.16 1.44 1.08 0.86 0.72 203.4 60.32 0.254 0.406

7 H, HS 5250 3.43 2.29 1.71 1.37 1.14 324.8 65.1 0.305 0.508

8 H, HS 4500 5.37 3.58 2.68 2.15 1.79 511.8 74.6 0.381 0.635

9 H, HS 3750 8.50 5.67 4.25 3.40 2.83 813.5 88.9 0.432 0.711

10 H, HS 3600 13.42 8.95 6.71 5.37 4.47 1282.4 103.2 0.508 0.813

11 H, HS 3600 21.33 14.22 10.66 8.53 7.11 2033.7 123.8 0.559 0.940

12 H, HS 2800 37.28 24.85 18.64 14.91 12.43 3559 144.5 0.635 1.067

13 HS 2400 55.93 37.28 27.96 22.37 18.64 5340.6 168.3 0.762 1.27

COUPLING RATINGS & mISALIGNmENT

S FLANGES

1. SLEEVE 2. FLANGE 3. BUSHING

CO

UP

LIN

GS

16

Baldor Electric CompanyCA6001

Printed in the U.S.A.2/11 PRINTSHOP 500

Baldor ElEctric companyP.O. Box 2400 Fort Smith, AR 72902-2400 U.S.A.

Ph: (479) 646-4711 Fax (479) 648-5792 International Fax (479) 648-5895www.baldor.com www.maskapulleys.com

Japan DIA BLDG 802, 2-21-1 TSURUYA-CHO, KANAGAWA-KU YOKOHAMA, 221-0835, JAPAN PHONE: 81-45-412-4506 FAX: 81-45-412-4507

mEXico lEon, guanaJuato KM. 2.0 BLVD. AEROPUERTO LEN 37545, GUANAJUATO, MXICO PHONE: +52 477 761 2030 FAX: +52 477 761 2010 middlE EaSt & nortH aFrica VSE INTERNATIONAL CORP. P. O. BOX 5618 BUFFALO GROVE, IL 60089-5618 PHONE: 847 590 5547 FAX: 847 590 5587

panama AVE. RICARDO J. ALFARO EDIFICIO SUN TOWERS MALL PISO 2, LOCAL 55 CIUDAD DE PANAM, PANAM PHONE: +507 236-5155 FAX: +507 236-0591

SingaporE 18 KAKI BUKIT ROAD 3, #03-09 ENTREPRENEUR BUSINESS CENTRE SINGAPORE 415978 PHONE: (65) 6744 2572 FAX: (65) 6747 1708

SWitZErland POSTFACH 73 SCHUTZENSTRASSE 59 CH-8245 FEUERTHALEN SWITZERLAND PHONE: +41 52 647 4700 FAX: +41 52 659 2394

taiWan 1F, NO 126 WENSHAN 3RD STREET, NANTUN DISTRICT, TAICHUNG CITY 408 TAIWAN R.O.C PHONE: (886) 4 238 04235 FAX: (886) 4 238 04463

unitEd Kingdom 6 BRISTOL DISTRIBUTION PARK HAWKLEY DRIVE BRISTOL BS32 0BF U.K. PHONE: +44 1454 850000 FAX: +44 1454 859001

VEnEZuEla AV. ROMA. QTA EL MILAGRO. URB. CALIFORNIA NORTE CARACAS, 1070 VENEZUELA PHONE/FAX: +58 212 272 7343 MOBILE: +58 414 114 8623

nEW yorK auBurn ONE ELLIS DRIVE AUBURN, NY 13021 PHONE: 315-255-3403 FAX: 315-253-9923

nortH carolina grEEnSBoro 1220 ROTHERWOOD ROAD GREENSBORO, NC 27406 PHONE: 336-272-6104 FAX: 336-273-6628

oHio cincinnati 2929 CRESCENTVILLE ROAD WEST CHESTER, OH 45069 PHONE: 513-771-2600 FAX: 513-772-2219

clEVEland 8929 FREEWAY DRIVE MACEDONIA, OH 44056 PHONE: 330-468-4777 FAX: 330-468-4778

oKlaHoma tulSa 7170 S. BRADEN, SUITE 140 TULSA, OK 74136 PHONE: 918-366-9320 FAX: 918-366-9338

orEgon portland 20393 SW AVERY COURT TUALATIN, OR 97062 PHONE: 503-691-9010 FAX: 503-691-9012

pEnnSylVania pHiladElpHia 1035 THOMAS BUSCH MEMORIAL HIGHWAY PENNSAUKEN, NJ 08110 PHONE: 856-661-1442 FAX: 856-663-6363 pittSBurgH 159 PROMINENCE DRIVE NEW KENSINGTON, PA 15068 PHONE: 724-889-0092 FAX: 724-889-0094

tEnnESSEE mEmpHiS 4000 WINCHESTER ROAD MEMPHIS, TN 38118 PHONE: 901-365-2020 FAX: 901-365-3914

indiana indianapoliS 5525 W. MINNESOTA STREET INDIANAPOLIS, IN 46241 PHONE: 317-246-5100 FAX: 317-246-5110

ioWa dES moinES 1800 DIXON STREET, SUITE C DES MOINES, IA 50316 PHONE: 515-263-6929 FAX: 515-263-6515

maryland BaltimorE 6660 SANTA BARBARA RD. SUITES 22-24 ELKRIDGE, MD 21075 PHONE: 410-579-2135 FAX: 410-579-2677

maSSacHuSEttS BoSton 6 PULLMAN STREET WORCESTER, MA 01606 PHONE: 508-854-0708 FAX: 508-854-0291

micHigan dEtroit 5993 PROGRESS DRIVE STERLING HEIGHTS, MI 48312 PHONE: 586-978-9800 FAX: 586-978-9969

minnESota minnEapoliS 21080 134TH AVENUE NORTH ROGERS, MN 55374 PHONE: 763-428-3633 FAX: 763-428-4551

miSSouri St louiS 10254 PAGE INDUSTRIAL DRIVE ST. LOUIS, MO 63132-1314 PHONE: 314-426-0606 FAX: 314-426-0607

KanSaS city 1501 BEDFORD AVENUE NORTH KANSAS CITY, MO 64116 PHONE: 816-587-0272 FAX: 816-587-3735

tEXaS dallaS 2920 114TH STREET SUITE 100 GRAND PRAIRIE, TX 75050 PHONE: 214-634-7271 FAX: 214-634-8874

HouSton 10355 W. LITTLE YORK ROAD SUITE 300 HOUSTON, TX 77041 PHONE: 281-977-6500 FAX: 281-977-6510

utaH Salt laKE city 2230 SOUTH MAIN STREET SALT LAKE CITY, UT 84115 PHONE: 801-832-0127 FAX: 801-832-8911

WiSconSin milWauKEE 1960 SOUTH CALHOUN ROAD NEW BERLIN, WI 53151 PHONE: 262-784-5940 FAX: 262-784-1215

intErnational SalES Fort SmitH, ar P.O. BOX 2400 FORT SMITH, AR 72902 PHONE: 479-646-4711 FAX: 479-648-5895 canada

Edmonton, alBErta 4053-92 STREET EDMONTON, ALBERTA T6E 6R8 PHONE: 780-434-4900 FAX: 780-438-2600

toronto oaKVillE, ontario 2750 COVENTRY ROAD OAKVILLE, ONTARIO L6H 6R1 PHONE: 905-829-3301 FAX: 905-829-3302

montrEal, QuEBEc 5155 J-ARMAND BOMBARDIER SAINT-HUBERT, QUBEC CANADA J3Z 1G4 PHONE: 514-933-2711 FAX: 514-933-8639

VancouVEr, BritiSH columBia 1538 KEBET WAY PORT COQUITLAM, BRITISH COLUMBIA V3C 5M5 PHONE 604-421-2822 FAX: 604-421-3113

WinnipEg, manitoBa 54 PRINCESS STREET WINNIPEG, MANITOBA R3B 1K2 PHONE: 204-942-5205 FAX: 204-956-4251

intErnational

auStralia UNIT 3, 6 STANTON ROAD SEVEN HILLS, NSW 2147, AUSTRALIA PHONE: (61) (2) 9674 5455 FAX: (61) (2) 9674 2495

UNIT 8, 5 KELLETTS ROAD ROWVILLE, VICTORIA, 3178 AUSTRALIA PHONE: (61) (3) 9753 4355 FAX: (61) (3) 9753 4366

El SalVador RESIDENCIAL PINARES DE SUIZA POL. 15 #44, NVA. SAN SALVADOR, EL SALVADOR PHONE: +503 2288-1519 FAX: +503 2288-1518

cHilE LUIS THAYER OJEDA 166, OF 402 - PROVIDENCIA SANTIAGO, CHILE PHONE: +56 2 816 9900

cHina 160 SONG SHENG ROAD SONGJIANG INDUSTRY ZONE SHANGHAI 201613, CHINA PHONE: +86 21 5760 5335 FAX : +86 21 5760 5336

gErmany HERMANN-HEINRICH - GOSSEN 3 50858 KOLN, GERMANY PHONE: 49-2234379410 FAX: 49-22343794164

DIESELSTRASSE 22 D-85551 KIRCHHEIM MUNICH, GERMANY PHONE: +49 89 90 5080 FAX: +49 89 90 50 8492

india 14, COMMERCE AVENUE MAHAGANESH COLONY PAUD ROAD PUNE - 411038 MAHARASHTRA, INDIA PHONE: +91 20 25 45 27 17 / 18 FAX: +91 20 25 45 27 19

indonESia TALAVERA OFFICE PARK, 28TH FLOOR, SUITE M18 JI. T.B. SIMATUPANG, KAV. 22-26 JAKARTA 12430, INDONESIA PHONE: +62 21 7599 9879 FAX: + 62 21 7599 9878

italy VIA SOTTOBISIO 30 BALERNA CH-6828 PHONE: +41 91 683 6161 FAX: +41 91 630 2633

unitEd StatES

ariZona pHoEniX 4211 S 43RD PLACE PHOENIX, AZ 85040 PHONE: 602-470-0407 FAX: 602-470-0464

arKanSaS clarKSVillE 1001 COLLEGE AVENUE CLARKSVILLE, AR 72830 PHONE: 479-754-9108 FAX: 479-754-9205

caliFornia loS angElES 6480 FLOTILLA STREET COMMERCE, CA 90040 PHONE: 323-724-6771 FAX: 323-721-5859

HayWard 21056 FORBES AVENUE HAYWARD, CA 94545 PHONE: 510-785-9900 FAX: 510-785-9910

colorado dEnVEr 3855 FOREST STREET DENVER, CO 80207 PHONE: 303-623-0127 FAX: 303-595-3772

connEcticut WallingFord 65 SOUTH TURNPIKE ROAD WALLINGFORD, CT 06492 PHONE: 203-269-1354 FAX: 203-269-5485

Florida tampa/puErto rico/ Virgin iSlandS 3906 EAST 11TH AVENUE TAMPA, FL 33605 PHONE: 813-248-5078 FAX: 813-247-2984

gEorgia atlanta 62 TECHNOLOGY DRIVE ALPHARETTA, GA 30005 PHONE: 770-772-7000 FAX: 770-772-7200

illinoiS cHicago 340 REMINGTON BLVD. BOLINGBROOK, IL 60440 PHONE: 630-296-1400 FAX: 630-226-9420

EdmontonVancouVEr

diStrict oFFicE & WarEHouSES

portland

HayWard

loS angElES

pHoEniX

montErrEy

guadalaJara

tampa

FortSmitH

mEmpHiS

WinnipEg

atlanta

KanSaS city

St louiS

dEnVEr

dES moinES

grEEnSBoro

BaltimorE

pittSBurgH

cincinnati

indianapoliS

dallaS

cHicago

pHiladElpHianEW yorK

BoStonauBurn

clEVEland

dEtroit

torontominnEapoliS milWauKEE

Salt laKE city

tulSa

montrEal

HouSton

lEon

WallingFord

clarKSVillE

mEXico city

BALDORMASKA SalES oFFicES

Documents

Poleas en Milimetros