Verso 2.0Reviso AMaro 2012 F

GUIA DO USURIO

Monitor CFX-750

rea de Agro-NegciosTrimble Navigation LimitedTrimble Agriculture Division10355 Westmoor Drive

Version 2.1, February 1999Copyright c 1991, 1999 Free Software Foundation, Inc.51 Franklin Street, Fifth Floor, Boston, MA 02110-1301USA2 Guia do Usurio do CFX-750 Display

Suite #100Westminster, CO 80021EUAtrimble_support@trimble.comwww.trimble.com

Notcias de Ordem LegalDireitos Autorais & Marcas Comerciais 2010, Trimble Navigation Limited. Todos os direitos reservados. Trimble, a logomarca Globo & Tringulo, AgGPS, EZ-Boom, EZ-Guide, EZ-Steer, FmX, e Tru Count so marcas comerciais da Trimble Navigation Limited, registrada nos Estados Unidos e em outros pases. Autopilot, Autoseed, AutoSense, CFX-750, EZ-Office, FieldManager, Field-IQ, FreeForm, VRS, VRS Now, T2, Tru Application Control, TrueGuide, e TrueTracker so marcas comerciais da Trimble Navigation Limited.GreenSeeker uma marca comercial da NTech Ltd.Para suporte STL, o software usa o Moscow Center para adaptao SPARC Technology da SGI Standard Template Library. Direito Autoral de 1994 Hewlett-Packard Company, Copyright 1996, 97 Silicon Graphics Computer Systems, Inc., Copyright 1997 Moscow Center para SPARC Technology.Microsoft, Windows, ActiveX, Excel, e Internet Explorer so marcas comerciais ou so marcas comerciais da Microsoft Corporation nos Estados Unidos e/ou outros pases.Partes de Direitos Autorais (c) 2009 Nokia Corporation e/ou suas subsidirias).Partes de Direitos Autorais (c) 2003, Bitstream Inc.Todas as outras so marcas comerciais de propriedade de seus respectivos donos.

Notcia de LanamentoEste o lanamento de Maro 2012 (Verso 4.0, Reviso A) doGuia do Usurio do CFX-750 Display. Se aplica verso 2.0 do software do CFX-750.

Notcias de Ordem LegalAs seguintes garantias limitadas fornecem direitos legais especficos. Podem haver outras, as quais variam de estado/jurisdio para outro estado/jurisdio.

Product Limited WarrantyTrimble warrants that this Trimble product and its internal components (the Product) shall be free from defects in materials and workmanship and will substantially conform to Trimbles applicable published specifications for the Product for a period of one (1) year, starting from the earlier of (i) the date of installation, or (ii) six (6) months from the date of original Product shipment from Trimble. This warranty applies only to the Product if installed by Trimble or a dealer authorized by Trimble to perform Product installation services.

Software ComponentsAll Product software components (sometimes hereinafter also referred to as Software) are licensed solely for use as an integral part of the Product and are not sold. Any software accompanied by a separate end user license agreement (EULA) shall be governed by the terms, conditions, restrictions and limited warranty terms of such EULA notwithstanding the preceding paragraph.During the limited warranty period you will be entitled to receive such Fixes to the Product software that Trimble releases and makes commercially available and for which it does not charge separately, subject to the procedures for delivery to purchasers of Trimble products generally. If you have purchased the Product from an authorized Trimble dealer rather than from Trimble directly, Trimble may, at its option, forward the software Fix to the Trimble dealer for final distribution to you. Minor Updates, Major Upgrades, new products, or substantially new software releases, as identified by Trimble, are expressly excluded from this update process and limited warranty. Receipt of software Fixes or other enhancements shall not serve to extend the limited warranty period. For purposes of this warranty the following definitions shall apply: (1) Fix(es) means an error correction or other update created to fix a previous software version that does not substantially conform to its Trimble specifications; (2) Minor Update occurs when enhancements are made to current features in a software program; and (3) Major Upgrade occurs when significant new features are added to software, or when a new product containing new features replaces the further development of a current product line. Trimble reserves the right to determine, in its sole discretion, what constitutes a Fix, Minor Update, or Major Upgrade. This Trimble software contains Qt 4.5 libraries licensed under the GNU Lesser General Public License (LGPL). The source is available from http://qt.nokia.com/downloads. A copy of the LGPL license is included in the appendices of this manual, and at ftp://ftp.trimble.com/pub/open_source/FmX.This software includes the DejaVu fonts, which are licensed under the Bitstream Vera license, terms available at http://dejavu-fonts.org/wiki/index.php?title=License and http://www.gnome.org/fonts/.GNU LESSER GENERAL PUBLIC LICENSE

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]PreambleThe licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software-to make sure the software is free for all its users.This license, the Lesser General Public License, applies to some specially designated software packages-typically libraries-of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below.When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things.To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it.For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/ or modify the library.To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others.Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license.Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library.We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.In other cases, permission to use a particular library in nonfree programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run.

GNU LESSER GENERAL PUBLIC LICENSETERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION0. This License Agreement applies to any software library or other program

corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.If distribution of object code is made by offering access to copy from a Guia do Usurio do CFX-750 Display 3

which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".)"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interfacedefinition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:a) The modified work must itself be a software library.b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy.This option is useful when you wish to copy part of the code of the Library into a program that is not a library.4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete

designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.)b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above.

b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work.8. You may not copy, modify, sublicense, link with, or distribute the Library

JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY OR FULLY APPLY TO YOU.PLEASE NOTE: THE ABOVE TRIMBLE LIMITED WARRANTY PROVISIONS 4 Guia do Usurio do CFX-750 Display

except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License.

Warranty RemediesTrimbles sole liability and your exclusive remedy under the warranties set forth above shall be, at Trimbles option, to repair or replace any Product that fails to conform to such warranty (Nonconforming Product), and/or issue a cash refund up to the purchase price paid by you for any such Nonconforming Product, excluding costs of installation, upon your return of the Nonconforming Product to Trimble in accordance with Trimbles product return procedures than in effect. Such remedy may include reimbursement of the cost of repairs for damage to third-party equipment onto which the Product is installed, if such damage is found to be directly caused by the Product as reasonably determined by Trimble following a root cause analysis.

Warranty Exclusions and DisclaimerThese warranties shall be applied only in the event and to the extent that (a) the Products and Software are properly and correctly installed, configured, interfaced, maintained, stored, and operated in accordance with Trimble's relevant operator's manual and specifications, and; (b) the Products and Software are not modified or misused. The preceding warranties shall not apply to, and Trimble shall not be responsible for defects or performance problems resulting from (i) the combination or utilization of the Product or Software with hardware or software products, information, data, systems, interfaces or devices not made, supplied or specified by Trimble; (ii) the operation of the Product or Software under any specification other than, or in addition to, Trimble's standard specifications for its products; (iii) the unauthorized, installation, modification, or use of the Product or Software; (iv) damage caused by accident, lightning or other electrical discharge, fresh or salt water immersion or spray (outside of Product specifications); or (v) normal wear and tear on consumable parts (e.g., batteries). Trimble does not warrant or guarantee the results obtained through the use of the Product or that software components will operate error free.THE WARRANTIES ABOVE STATE TRIMBLE'S ENTIRE LIABILITY, AND YOUR EXCLUSIVE REMEDIES, RELATING TO THE PRODUCTS AND SOFTWARE. EXCEPT AS OTHERWISE EXPRESSLY PROVIDED HEREIN, THE PRODUCTS, SOFTWARE, AND ACCOMPANYING DOCUMENTATION AND MATERIALS ARE PROVIDED AS-IS AND WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND BY EITHER TRIMBLE NAVIGATION LIMITED OR ANYONE WHO HAS BEEN INVOLVED IN ITS CREATION, PRODUCTION, INSTALLATION, OR DISTRIBUTION INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NONINFRINGEMENT. THE STATED EXPRESS WARRANTIES ARE IN LIEU OF ALL OBLIGATIONS OR LIABILITIES ON THE PART OF TRIMBLE ARISING OUT OF, OR IN CONNECTION WITH, ANY PRODUCTS OR SOFTWARE. BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON DURATION OR THE EXCLUSION OF AN IMPLIED WARRANTY, THE ABOVE LIMITATION MAY NOT APPLY OR FULLY APPLY TO YOU.NOTICE REGARDING PRODUCTS EQUIPPED WITH TECHNOLOGY CAPABLE OF TRACKING SATELLITE SIGNALS FROM SATELLITE BASED AUGMENTATION SYSTEMS (SBAS) (WAAS/EGNOS, AND MSAS), OMNISTAR, GPS, MODERNIZED GPS OR GLONASS SATELLITES, OR FROM IALA BEACON SOURCES: TRIMBLE IS NOT RESPONSIBLE FOR THE OPERATION OR FAILURE OF OPERATION OF ANY SATELLITE BASED POSITIONING SYSTEM OR THE AVAILABILITY OF ANY SATELLITE BASED POSITIONING SIGNALS.

Limitation of LiabilityTRIMBLES ENTIRE LIABILITY UNDER ANY PROVISION HEREIN SHALL BE LIMITED TO THE AMOUNT PAID BY YOU FOR THE PRODUCT OR SOFTWARE LICENSE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL TRIMBLE OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER UNDER ANY CIRCUMSTANCE OR LEGAL THEORY RELATING IN ANY WAY TO THE PRODUCTS, SOFTWARE AND ACCOMPANYING DOCUMENTATION AND MATERIALS, (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS), REGARDLESS WHETHER TRIMBLE HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH LOSS AND REGARDLESS OF THE COURSE OF DEALING WHICH DEVELOPS OR HAS DEVELOPED BETWEEN YOU AND TRIMBLE. BECAUSE SOME STATES AND

WILL NOT APPLY TO PRODUCTS PURCHASED IN THOSE JURISDICTIONS (E.G., MEMBER STATES OF THE EUROPEAN ECONOMIC AREA) IN WHICH PRODUCT WARRANTIES ARE THE RESPONSIBILITY OF THE LOCAL DEALER FROM WHOM THE PRODUCTS ARE ACQUIRED. IN SUCH A CASE, PLEASE CONTACT YOUR TRIMBLE DEALER FOR APPLICABLE WARRANTY INFORMATION.

Idioma OficialO IDIOMA OFICIAL PARA ESTES TERMOS E CONDIES O INGLS. NO EVENTO DE UM CONFLITO ENTRE O INGLS E OUTRAS VERSES DE IDIOMAS, O IDIOMA INGLS DEVE CONTROLAR.

InscrioPARA RECEBER INFORMAO CONSIDERANDO ATUALIZAES E NOVOS PRODUTOS, FAVOR CONTACTAR SEU REPRESENTANTE LOCAL OU VISITAR O STIO DA TRIMBLE EM www.trimble.com/register. APS INSCRIO PODER SELECIONAR O FOLHETO INFORMATIVO, ATUALIZAO, OU NOVA INFORMAO DO PRODUTO QUE DESEJAR.

NoticesThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. TRIMBLE is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Responsible Party:Trimble Navigation935 Stewart DriveSunnyvale CA 94085Telephone: 1-408 481 8000

CanadaThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.This apparatus complies with Canadian RSS-GEN, RSS-310, RSS-210, and RSS-119.Cet appareil est conforme la norme CNR-GEN, CNR-310, CNR-210, et CNR-119 du Canada.

Australia and New Zealand Class A StatementAttention: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Australia and New ZealandThis product conforms with the regulatory requirements of the Australian Communications Authority (ACA) EMC framework, thus satisfying the requirements for C-Tick Marking and sale within Australia and New Zealand.

Notcia para Usurios da Unio EuropiaPara instrues de reciclagem do produto e mais informao, favor ir em www.trimble.com/ev.shtml.Reciclagem na Europa: Para reciclar Trimble WEEE (Waste Electrical and Electronic Equipment, produtos que funcionam em energia eltrica.), Telefonar +31 497 53 24 30, e perguntar por "WEEE Associate". Ou, enviar pelo correio um pedido para instrues de reciclagem para:Trimble Europe BVc/o Menlo Worldwide LogisticsMeerheide 455521 DZ Eersel, NL

SeguranaSempre siga as instrues que acompanham um Aviso ou Cuidado. As informaes que so fornecidas tem a inteno de minimizar o risco de ferimentos em pessoas e/ou danos propriedade. Em particular, observe as instrues de segurana que so apresentadas no seguinte formato:

C AVISO Alerta sobre um potencial risco o qual, se no evitado, pode causar severos ferimentos.

C CUIDADO Alerta sobre um risco ou prtica no segura os quais, se no evitados, podem causar ferimento ou dano.

Nota Uma ausncia de alertas especficos no significa a no existncia riscos de segurana envolvidos.

Avisos

C AVISO Amnia anidra (NH3) pode causar severas queimaduras graves, cegueira, ou morte. Antes de comear a operar ou dar manuteno em um equipamento que contm NH3, leia cuidadosamente e siga todas as instrues de segurana em Trabalhando com amnia anidra, pgina 6.

C AVISO Ajuste incorreto da configurao da calibrao da Sensibilidade de Substituio Manual pode causar a falha desta caracterstica crtica de segurana, resultando em ferimento pessoal ou dano ao veculo. Qualquer ajuste nesta configurao deve somente ser efetuada por um usurio experiente.

C AVISO Durante a calibrao da Zona Morta, o sistema move o volante de direo do veculo. Para evitar ferimentos, esteja preparado para movimentos sbitos do veculo.

C AVISO Quando tocar o boto Iniciar da calibrao de vazo lquida, a mquina se tornar operacional. Tomar todas as precaues necessrias para garantir a segurana do usurio. Falhar em faz-lo pode resultar em srios ferimentos ou morte.

C AVISO Quando tocar o boto Iniciar da calibrao da vlvula de controle, a mquina se tornar operacional. Tomar todas as precaues necessrias para garantir a segurana do usurio. Falhar em faz-lo pode resultar em srios ferimentos ou morte.

C AVISO Quando tocar o boto Iniciar de encher disco, a mquina se torna operacional. Tomar todas as precaues necessrias para garantir a segurana do usurio. Falhar em faz-lo pode resultar em srios ferimentos ou morte.Guia do Usurio do CFX-750 Display 5

SeguranaC AVISO Quando o implemento estiver abaixado e a chave mestra na posio Ligada, a mquina est totalmente operacional. Tomar todas as precaues necessrias para garantir a segurana do usurio. Falhar em faz-lo pode resultar em srios ferimentos ou morte.

C AVISO O monitor contm uma bateria de sulfeto de Ltio LiSO2 para um nico uso. No expor a bateria temperaturas maiores do que 71 C (160 F) ou a bateria pode explodir.

C AVISO MOVENDO PARTES DURANTE ESTE TESTE! Favor estar afastado do implemento. Certifique-se de que o implemento esteja levantado, a transmisso esteja em PONTO MORTO (PARK) e o freio de emergncia esteja aplicado antes de continuar.

Trabalhando com amnia anidra Contatar seu fornecedor de NH3 para rever todos os requisitos de segurana

associados com amnia anidra (NH3).

Sempre use equipamento correto para proteo pessoal. Isto inclui, mas no est limitado :

culos de proteo ou protetor para a face

Macaco e luvas de proteo

Respirador

No permita qualquer pessoa operar o sistema sem prpria instruo e treinamento.

Fique em p quando trabalhando com NH3 e equipamento relacionado.

Sempre mantenha equipamento de NH3 afastado de edifcaes, animais e outras pessoas.

Nunca trabalhe com equipamento de NH3 em ambientes fechados.

Antes de tentar transportar o implemento, descarregue todo NH3 do sistema e feche completamente o sistema. Veja Descarregando o sistema, pgina 7.

Se sintomas de doena ocorrerem durante ou logo aps usar produtos com NH3, procurar imediatamente ateno mdica.

Mantenha sempre um recipiente com gua limpa (pelo menos quinze litros) totalmente disponvel. No caso de exposio, lavar imediatamente a pele exposta ou os olhos com grande quantidade de gua e procurar imediatamente ateno mdica.

NH3 pode ser prejudicial ao ambiente se no usado corretamente. Siga todos os regulamentos locais, estaduais e federais relacionados manipulao apropriada deste material qumico.6 Guia do Usurio do CFX-750 Display

SeguranaFazendo a manuteno do equipamento

1. Remova o sistema de operao antes de executar qualquer manuteno.

2. Esvazie completamente toda a tubulao do sistema e desconecte a mangueira principal do tanque. Ver Descarregando o sistema, pgina 7.

3. Certifique-se de que a presso no medidor zero antes de abrir o sistema.

4. Use extremo cuidado quando abrir um sistema previamente pressurizado.

Descarregando o sistema

1. Desligue a chave mestra da console ou do veculo.

2. Feche completamente a vlvula no tanque de suprimento.

3. Continue aplicao da rea at que o medidor de presso mostre presso zero.

4. Verifique outra vez se a chave mestra da console e/ou do veculo, e todas as chaves de seo, esto desligadas.

5. Feche completamente a vlvula de fechamento de emergncia da torre de resfriamento.

6. Esvazie e desconecte a mangueira do tanque de suprimento do sistema.

7. Desligue a chave mestra da console e todas as chaves de seo.

8. Fique a favor do vento ao lado do implemento e ento abra vagarosamente a(s) vlvula(s) at que esteja(m) totalmente aberta(s).

9. Espere pelo menos 1 hora para que o sistema descarregue totalmente.

10. Antes de abrir o sistema, certifique-se de que o medidor de presso no complexo esteja em zero e que a torre de resfriamento no esteja muito fria ao toque. Isto garante que todo NH3 lquido foi evaporado e que a presso est descarregada.

Nota Congelamento em qualquer componente uma indicao positiva de NH3 aprisionado em baixa presso. Ausncia de congelamento nem sempre indica falta de NH3. Guia do Usurio do CFX-750 Display 7

Segurana8 Guia do Usurio do CFX-750 Display

ndice de matrias Segurana . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Avisos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Trabalhando com amnia anidra . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Fazendo a manuteno do equipamento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1 Introduo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Sobre o produto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Informao Relacionada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Assistncia tcnica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2 Instalando o Monitor e Antena . . . . . . . . . . . . . . . . . . . . . . . . . 17Componentes do sistema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Instalando o Monitor CFX-750. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Conectando o monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Conectando o monitor CFX-750 como um sistema independente para correes WAAS / EGNOS / OmniSTAR XP/HP . . . . . . . . . . . . . . . . . . . . . . . 21

Conectando o monitor CFX-750 como um sistema independente para correes RTK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Instalando a antena . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3 Iniciando . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Informaes bsicas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Viso frontal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Viso da traseira . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Limpando a tela de toque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Ligar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Desligar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Reinicializando o monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29O conector USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Removendo um Pen-drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Tirando uma cpia da tela . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

O Wizard de Incio Rpido. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Usando os wizards de configurao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33A tela de orientao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Configuraes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Visualizar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35cones adicionais . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36cone de accesso rpido. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37O cone rea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39O cone Orientao. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39O cone de Mapeamento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40O cone Auto-Dirigir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Lendo padres dos LEDs na barra de luzes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Guia do Usurio do CFX-750 Display 9

ndice de matriasUsando o joystick EZ-Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41cones na tela . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

4 Veculo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Introduo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 O sistema de direo assistida EZ-Steer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Configurar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Calibrao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Operao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

O sistema de direo EZ-Pilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Configurar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Calibrao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Operao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

O sistema de direo automatizada Autopilot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Configurar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Operao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

5 Controlador de Aplicao do Implemento . . . . . . . . . . . . . . . . . . 69Introduo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Prescries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Sistema de controle de insumos Field-IQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Definies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Unidades de medida . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Configurando o sistema Field-IQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Operao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Controlador HARDI 5500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102Configurar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102Avanada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102Operao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Controladores Raven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105Configurar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105Avanada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106Operao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

Controlador Rawson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108Configurar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108Avanada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109Operao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Controlador Amazone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111Configurar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111Avanada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112Operao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

Controlador LH 5000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114Configurar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114Avanada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114Operao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Vaderstad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11710 Guia do Usurio do CFX-750 Display

ndice de matriasConfigurao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117Avanada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117Chaveamento de seo nica da barra . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119Pular para a Taxa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

Controlador Bogballe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119Configurar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119Avanada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120Chaveamento de seo nica da barra . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

Verificando a conexo do implemento. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

6 Mapeamento e Orientao . . . . . . . . . . . . . . . . . . . . . . . . . . 123Introduo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124Configurando a Orientao. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

Configuraes da Volta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125Configuraes da Aplicao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126Configuraes da Aproximao. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126Mapeando . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127Gravao FreeForm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127Chaveamento da Cabeceira/Interior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128Configurar limite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

Iniciando Orientao. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129Opes para Configurar Implemento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129Usando orientao em segmentos curvos . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130Usando orientao em segmentos retos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130Criando sees retas em Cabeceira ou leiras Curvas. . . . . . . . . . . . . . . . . . . . . . .130

reas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131Criando uma nova rea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131Selecionando (carregando) uma rea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131Adicionando uma linha AB rea atual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131Selecionando (carregando) uma linha AB em uma rea . . . . . . . . . . . . . . . . . . . . .132Manuteno de registros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

Reinicializando a orientao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132Linhas de orientao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133

Distncia entre linhas de orientao. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133Cabeceiras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133Aparncia na tela . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133

Padres de Orientao. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134Reta AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134Linha A+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135Curva idntica. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135Curva adaptativa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136Piv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137Cabeceira . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137FreeForm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

Gravao da aplicao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140A funo pausar / resumir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141Guia do Usurio do CFX-750 Display 11

ndice de matriasSuavizao da curva . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

7 GPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143Introduo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144Configurar GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144Qualidade da Posio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145Avanada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

Tipo de Antena . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145Use satlite SBAS para ter correo da posio . . . . . . . . . . . . . . . . . . . . . . . . . .145Forar GPS Iono. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146Filtro na Passagem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146Sade do Satlite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146Status do GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146Status do Satlite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147Status DGPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147Status do Filtro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

8 Dados . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149Introduo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150Modem DCM-300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

Senhas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150Configurando o monitor para correes VRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152Configurando VRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153Configurar Connected Farm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154

Configurao inicial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154Nome do dispositivo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155Configurar somente modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155Inscrio na rede . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156

Transferncia de dados - Connected Farm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156Enviando dados do campo usando Connected Farm. . . . . . . . . . . . . . . . . . . . . . . . . . .157Recebendo dados do Campo atravs do servio Connected Farm . . . . . . . . . . . . . . . . . .157Administrar Dados . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159Limpando a memria interna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

9 Sistema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161Introduo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162

Unidades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162Esquema de Cor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163Fuso Horrio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163Visualizao . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163Transparncia da Visualizao do Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163Luz de fundo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164Volume do sonorizador ao tocar na tela . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16412 Guia do Usurio do CFX-750 Display

ndice de matriasConfigurao da Barra de luzes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164Avanada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165

Salvar/Carregar Configuraes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165Sada Digital de Radar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165Habilitar Configurao Avanada do Usurio . . . . . . . . . . . . . . . . . . . . . . . . . . .166Sada NMEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

Joystick EZ-Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166Wizard de Atribuio do Teclado EZ-Remote . . . . . . . . . . . . . . . . . . . . . . . . . . .167Brilho do LED do EZ-Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167Atribuies do Teclado do EZ-Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167Operao do EZ-Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

Desbloquear / Atualizar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169Atualizando seu monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169Desbloqueando funes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170Tela CFX-750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170Recalibrar a tela de toque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171Guia do Usurio do CFX-750 Display 13

ndice de matrias14 Guia do Usurio do CFX-750 Display

C A P T U L O

1Introduo 1Este manual descreve como instalar, configurar, e usar o monitor CFX-750, verso 2.00.

Mesmo se tiver usado antes outros produtos de Sistemas de Navegao Global por Satlite (GNSS) ou controle da aplicao tais como o Sistema de Posicionamento Global (GPS) dos Estados Unidos da Amrica, recomendado que gaste algum tempo lendo este manual para aprender sobre as caractersticas especiais deste produto. Se no estiver familiarizado com o GNSS, visite o stio da Trimble (www.trimble.com) para uma viso interativa da Trimble e do GNSS.

Sobre o produtoO CFX-750 um monitor com tela de toque na-cabine o qual fornece orientao um custo acessvel, funcionalidade para direo e agricultura de preciso.

O CFX-750 inclui um receptor de GPS embutido que se pode atualizar para receber sinais de satlite GLONASS. O monitor pode tambm usar um conjunto de componentes para maximizar

Informao RelacionadaFontes de informao relacionada incluem o seguinte:

Notcias de lanamento As notcias de lanamento descrevem novas caractersticas do produto, informao no includa nos manuais, e quaisquer mudanas nos manuais. As notcias de lanamento esto disponveis em www.trimble.com.

Cursos de treinamento da Trimble Considere um curso de treinamento para ajud-lo no uso do seu sistema de GPS para alcanar um potencial mximo. Para mais informao, ir ao stio da Trimble em www.trimble.com/training.html.

Assistncia tcnicaContatar seu Representante para assistncia tcnica.Guia do Usurio do CFX-750 Display 15

eficincia quando plantando, pulverizando, espalhando e preparando o solo, incluindo o sistema de controle de insumos Field-IQ da Trimble.

1 Introduo16 Guia do Usurio do CFX-750 Display

C A P T U L O

2Instalando o Monitor e Antena 2

Neste captulo:

Componentes do sistema

Instalando o Monitor CFX-750

Conectando o monitor

Instalando a antena

Este captulo introduz o CFX-750 e os componentes do sistema, e tambm descreve como instalar o monitor e a antena.Guia do Usurio do CFX-750 Display 17

2 Instalando o Monitor e AntenaComponentes do sistema

Item Descrio Nmero da parte

c CFX-750 94110-00

d Suporte RAM e parafusos 61958

e Carto de referncia rpida 78838-00-ENG

f Disco compacto 78821-02

g Cabo da antena GPS 50449

h Cabo de alimentao do barramento/CAN 77282

i Cabo de alimentao 67258-01

j Antena AG25 77038

k Placa de suporte da antena AG25 62034

c

d e

f

j

h

g

k

i18 Guia do Usurio do CFX-750 Display

Instalando o Monitor e Antena 2Instalando o Monitor CFX-750Monte o CFX-750 na cabine do veculo. Quando posicionar o monitor, certifique-se de que:

est ao alcance do motorista; o Pen-drive facilmente removvel e substituvel.

a tela de toque fcil de se ver e o monitor no bloqueia a viso do motorista.

o mesmo no interfere quando o motorista entra e sai da cabine, ou executa quaisquer outras atividades.

A imagem mostra o suporte de montagem para o monitor:

Para instalar o monitor:

1. Usar os parafusos fornecidos para conectar firmemente a placa de suporte em formato de losango na parte de trs do monitor:

Item Description

c Placa de suporte em formato de losango

d Suporte RAM

e Suporte da barra

c

d

eGuia do Usurio do CFX-750 Display 19

2 Instalando o Monitor e Antena2. Fixar o suporte RAM bola na placa de suporte em formato de losango:

3. Selecionar uma posio na cabine para o monitor. Fixar o monitor no local selecionado e verificar se o mesmo est facilmente acessvel do banco do motorista.

4. Usar os rebites/parafusos para fixar o suporte da barra na cabine.

5. Fixar o outro lado do suporte RAM bola no suporte da barra e apertar o parafuso.

Conectando o monitorOS diagramas nesta seo mostram como configurar o CFX-750 como um sistema independente.

Para aprender como conectar o CFX-750 outros componentes do sistema, ver o Guia de Cabeamento do Monitor CFX-750.20 Guia do Usurio do CFX-750 Display

Instalando o Monitor e Antena 2Conectando o monitor CFX-750 como um sistema independente para correes WAAS / EGNOS / OmniSTAR XP/HP

Conectando o CFX-750 para usar correes WAAS ou XP/HP:

Item Descrio Nmero da parte Trimble

c Monitor CFX-750 94110-00

d Cabo de alimentao CFX-750 77282-01

e Cabo bsico de alimentao CFX-750 basic 67258

f Cabo com conectores angulares de 8 m GPS (TNC/TNC RT) 50449

g Antena AG25 GNSS 77038

c

d

e

f

gGuia do Usurio do CFX-750 Display 21

2 Instalando o Monitor e AntenaConectando o monitor CFX-750 como um sistema independente para correes RTK

Conectando um CFX-750 independente para usar correes RTK:

Item Descrio Nmero da parte Trimble

c Monitor CFX-750

Nota Senha RTK necessria.

94110-00

d Cabo de alimentao CFX-750 77282

e Cabo bsico de alimentao CFX-750 67258-01

f Cabo com conectores angulares de 8 m GPS (TNC/TNC RT) 50449

g Antena AG25 GNSS 77038

h Cabo de 20 m e base (NMO ao TNC) 62120

i Kit de antena do rdio de 900 MHz 22882-10

c

d

e

f

g

h

i22 Guia do Usurio do CFX-750 Display

Instalando o Monitor e Antena 2Instalando a antenaNota Para minimizar qualquer interferncia no sinal do GPS, certifique-se de que a antena GPS est pelo menos a 1 m (3 ps) de qualquer outra antena (incluindo uma antena de rdio). Pode-se experimentar interferncia se operar o veculo dentro do limite de 100 m (300 ps) de qualquer linha de transmisso, disco de radar, ou torre de telefone celular.

Nota A antena AG25 tem magnetos (ms) para fcil instalao. Para fixar a antena em uma superfcie no-metlica, ser necessrio usar a placa de suporte

1. Achar o local de montagem para a antena na frente do teto do veculo, centralizada da esquerda para a direita.

2. Na placa de suporte, remover as fitas adesivas das coberturas de proteo.

3. Fixar a placa de suporte no teto do veculo com as fitas adesivas. Certifique-se de que a placa de suporte est centralizada ao longo do teto do veculo.

4. Conectar o cabo da antena antena.

5. Colocar a antena diretamente na placa de suporte. Os trs magnetos embutidos no funda da antena iro segur-la no lugar.

6. Direcionar o outro lado do cabo da antena para dentro da cabine.Guia do Usurio do CFX-750 Display 23

2 Instalando o Monitor e Antena24 Guia do Usurio do CFX-750 Display

C A P T U L O

3Iniciando 3

Informaes bsicas

O Wizard de Incio Rpido

Usando os wizards de configurao

A tela de orientao

Lendo padres dos LEDs na barra de luzes

Usando o joystick EZ-Remote

cones na tela

Este captulo descreve, em termos gerais, como usar o monitor CFX-750.Guia do Usurio do CFX-750 Display 25

3 IniciandoInformaes bsicasO CFX-750 fornece funcionalidade de orientao, direo e agricultura de preciso. O monitor tem tela de toque que se pode usar para operar seu sistema, e visualizar informao de orientao. Em adio, existe uma porta USB para carregar e salvar dados do campo.

Viso frontal

C CUIDADO No pressionar a tela com alguma coisa afiada, tais como caneta ou chave de parafuso; pode-se danificar a superfcie da tela.

Item Descrio Notas

c Tela de 8" Sensvel ao toque Para interagir com o sistema, tocar a tela com os seus dedos.Para mais informao, ver Recalibrar a tela de toque, pgina171.

d Alto-falante Pode-se ajustar o volume, ou deslig-lo.Para mais informao, ver Volume do sonorizador ao tocar na tela, pgina164.

e Barra de luzes integrada com 27 LEDs Quando acesos, os LEDs mostram a posio do seu veculo relativa sua linha de orientao desejada.Para mais informao, ver Lendo padres dos LEDs na barra de luzes, pgina40.

c

e

d26 Guia do Usurio do CFX-750 Display

Iniciando 3Viso da traseira

Item Descrio Notas

c Boto Ligar/Desligar Liga ou desliga o monitor.

d

e

e

Controles de brilho Para aumentar o brilho da tela, pressionar d.

Para diminuir o brilho, pressionar e.Nota - Pode-se tambm usar as opes no menu Esquema de Cor e Luz de Fundo para configurar o brilho da tela. Ver Esquema de Cor, pgina163, and Luz de fundo, pgina164.

f Conector USB Pode-se Conectar um Pen-drive no monitor para se transferir dados. Para mais informao, ver O conector USB, pgina30.

g Conector GPS Conecta o cabo GPS (N/P 50449) no monitor.

h Porta A Conecta dispositivos externos ao monitor.

i Conector de alimentao Conecta o cabo de alimentao (N/P 67258) ao monitor.

j Porta B Conecta dispositivos externos ao monitor.

k Painel de accesso para rdio Se adquiriu o mdulo opcional RTK, instale o mdulo aqui. Para mais informao, ver as instrues de instalao fornecidas com o mdulo do rdio.

c

d

e

f

g

jh i

kGuia do Usurio do CFX-750 Display 27

3 IniciandoLimpando a tela de toque

Para limpar o CFX-750 usar o seguinte:

Limpador para vidro sem amnia

Nota No aplicar limpador para vidro diretamente na tela de toque.

Tecido macio, de algodo sem fiapos

lcool isoproplico 50%

1. Aplicar uma pequena quantidade de limpador para vidro no tecido e gentilmente esfregar na tela de toque.

2. Para limpar quaisquer manchas ou sujeiras, usar um tecido de algodo umedecido com lcool isoproplico 50%.

B Sugesto Limpar o monitor quando estiver desligado. mais fcil de se ver a sujeira e mancha dos dedos quando a tela de toque est escura.

Ligar

Para ligar o monitor, pressionar o boto de ligar na parte de trs. Em pouco tempo, a tela Bem-vindo aparece:

A primeira vez que ligar o CFX-750, os seguintes wizards aparecem:

Calibrao da tela:28 Guia do Usurio do CFX-750 Display

Iniciando 3Ser necessrio calibrar a tela de toque antes de poder usar o monitor; para faz-lo, siga as seguintes instrues na tela.

O wizard de Incio Rpido. Para configurar apropriadamente seu sistema, certifique-se de executar o wizard completamente. Ver O Wizard de Incio Rpido, pgina32.

Desligar

Para desligar o CFX-750, segure o boto de ligar/desligar por trs segundos. Enquanto pressionando o boto, a tela Desligamento em Progresso aparece:

Nota Para cancelar o processo de desligar, solte o boto antes de completar trs segundos.

Reinicializando o monitor

Ocasionalmente, pode-se desejar reinicializar as configuraes do monitor. Existem dois modos de se fazer isso:

Reinicializao simples: Isto retorna todas as configuraes aos padres de fbrica. Todos os dados de campo permanecem intactos.

Reinicializao completa: Isto retorna todas as configuraes aos padres de fbrica, e exclui todos os dados gravados incluindo quaisquer dados de campo.

Nota No execute uma reinicializao completa a menos que seja absolutamente necessrio ou for instrudo faz-lo pelo Tcnico do Suporte.

Reinicializao simples

1. Desligar o monitor e relig-lo.

2. Esperar at que a barra de status na parte de baixo da segunda tela de inicializar est pela metade:Guia do Usurio do CFX-750 Display 29

3 Iniciando3. Pressionar o boto de ligar/desligar e o boto de controle do brilho logo acima ao mesmo tempo:

4. Manter o boto pressionado at que o monitor produza um bip.

Reinicializao Completa

1. Desligar o monitor e relig-lo.

2. Esperar at que a barra de status na parte de baixo da segunda tela de inicializar est pela metade:

3. Pressionar o boto de ligar/desligar e ambos botes de controle do brilho ao mesmo tempo:

4. Manter o boto pressionado at que o monitor produza um bip.

O conector USB

O conector USB est na parte de trs do monitor. Ver em Viso da traseira, pgina 27.Use o conector USB para administrar seus dados via um Pen-drive.

Compatibilidade entre Pen-drives

Pode-se usar os seguintes Pen-drives com o CFX-750:

Adaptador A-Data micro SDHC/SD/USB ADATA Classic C801 8 GB Digital Concepts USB to PC Reader Adaptador Generic USB - uDHC com

carto Transcend 8 GB microSDHC Kingston Data Traveler 8 GB Kingston Data Traveler 101 Lexar Firefly 1 GB Lexar JumpDrive TwistTurn Lexar Secure II Plus PNY Attache PNY Micro Swivel Attache 4 GB PNY Mini Attache 4 GB PNY Mini Attache 8 GB SanDisk Cruzer SanDisk Cruzer Gator 4 GB SanDisk Cruzer Micro 1 GB Toshiba TransMemory U2M-004GTA 4 GB Transcend JetFlash30 Guia do Usurio do CFX-750 Display

Iniciando 3Inserindo um Pen-drive

1. Vire o monitor de modo que possa ver a parte de trs.

2. Insira o Pen-drive no conector USB. Quando Pen-drive estiver corretamente inserido, o cone do USB ir aparecer na tela de orientao:

A cor do cone do USB indica o estado atual do Pen-drive:

Verde: o Pen-drive est conectado.

Amarelo: o Pen-drive est conectando.

Vermelho: a conexo com o Pen-drive foi perdida.

Removendo um Pen-drive

1. Vire o monitor de modo que possa ver a parte de trs.

2. Remova o Pen-drive para fora do conector USB.

C CUIDADO No remover o Pen-drive do conector enquanto o monitor est gravando ou lendo no dispositivo. Isto ir corromper os dados.

Tirando uma cpia da tela

Ocasionalmente, poder desejar salvar uma cpia da tela de toque, por exemplo para fornecer informao com o objetivo de soluo de problemas. Quando tirar uma cpia da tela, o monitor salva um arquivo.png no diretrio raiz do Pen-drive.

A funcionalidade de cpia da tela est somente disponvel quando existe um Pen-drive inserido no monitor. Guia do Usurio do CFX-750 Display 31

3 IniciandoPara tirar uma cpia da tela:

1. Pressionar ambos botes de controle ao mesmo tempo:

2. Manter os botes pressionados at que a tela pisque.

C CUIDADO No remover o Pen-drive do conector enquanto o CFX-750 est gravando ou lendo no dispositivo. Isto ir corromper os dados.

O Wizard de Incio RpidoO Wizard de Incio Rpido permite se configurar coisas importantes antes de comear a dirigir. A primeira vez que ligar o monitor, o wizard se inicia automaticamente. Certifique-se de que quando ligar o monitor executar o wizard completamente.

Quando executar o wizard, pode-se escolher se o mesmo aparece cada vez que ligar o monitor. Se escolher para que o wizard no aparea, a tela de orientao ir automaticamente aparecer quando ligar novamente o monitor. Entretanto, pode-se ainda acessar o wizard mais tarde, desse modo:

1. Tocar e ento tocar .

2. Tocar Wizard de Incio Rpido. A tela Bem-Vindo aparece.

3. Tocar . A primeira pgina do Wizard de Incio Rpido aparece:

4. Para configurar seu sistema, completar cada pgina do wizard. Ver a seo abaixo.32 Guia do Usurio do CFX-750 Display

Iniciando 3Usando os wizards de configuraoO CFX-750 contm vrios wizards que dirigem voc completamente na tarefa de configurar seu sistema. A tabela seguinte descreve como usar os wizards para entrar suas configuraes no sistema.

Para ... Tocar ...

Selecionar a configurao desejada require

O campo que mostra o valor requerido. Quando fizer sua seleo, o campo muda de cor de cinza para verde.

Entrar os nmeros que deseja

Entrar texto

Aceitar a seleo e ir para a prxima tela

Aceitar a seleo e sair da tela

Navegar o wizard

Voltar para a pgina anterior

Sair do wizard

Nota Quando sair do wizard, o sistema mantm quaisquer configuraes que j tenha selecionado; para quaisquer configuraes que ainda no tenha introduzido, o sistema usa os valores da configurao anterior.

Acessar a ajuda na telaGuia do Usurio do CFX-750 Display 33

3 IniciandoA tela de orientao

A tela de orientao mostra uma mistura de texto e cones que fornecem informao da operao e acesso vrias funes do sistema. A disponibilidade do texto e cones dependem da configurao do seu sistema. Por exemplo, alguns cones no esto disponveis enquanto estiver usando um sistema de direo automtica.

Para ativar um cone, toc-lo com seu dedo. Se o monitor no responder quando toc-lo, ver Recalibrar a tela de toque, pgina171.

As seguintes sees descrevem os cones que podem aparecer na tela de orientao.

Status

Tocar para rolar atravs de vrias telas pop-up que descrevem vrias configuraes do sistema:

Para remover os pop-ups, continuar a tocar at que desapaream.34 Guia do Usurio do CFX-750 Display

Iniciando 3Configuraes

Tocar para abrir a tela de Configuraes:

Usar a tela Configuraes para ajustar suas configuraes do sistema, e visualizar o status do seguinte:

Visualizar

As opes para visualizar a tela de orientao so:

Aumentar o Zoom

Diminuir o Zoom

Mudar visualizao troca entre os cones viso Plana e viso em Perspectiva.

Modo Panorama

Para:

mudar a visualizao, tocar e ento selecionar a opo que deseja.

sair de uma visualizao e retornar tela de orientao, tocar .

Para aprender como mudar as configuraes de visualizao, ver Visualizao, pgina163.

Mudando o zoom

Para aumentar ou diminuir o zoom na tela de orientao, tocar ou .

Configurao Para mais informao, ver ...

Veculo Captulo 4, Veculo, pgina 45

Implemento Captulo 5, Controlador de Aplicao do Implemento, pgina 69

Orientao Captulo 6, Mapeamento e Orientao, pgina 123

GPS Captulo 7, GPS, pgina 143

Dados Captulo 8, Dados, pgina 149

Sistema Captulo 9, Sistema, pgina 161Guia do Usurio do CFX-750 Display 35

3 IniciandoModos de visualizao

Existem dois grandes modos de visualizao, Plana e Perspectiva.

Por padro, a visualizao muda de Plana para Perspectiva quando se aproximar de uma linha AB.

Para acessar a visualizao Plana, tocar .

Para acessar a visualizao em Perspectiva, tocar .

cones adicionais

A tela de orientao exibe vrios cones adicionais que esto normalmente escondidos.

Para visualizar ou esconder os cones adicionais, tocar ou .36 Guia do Usurio do CFX-750 Display

Iniciando 3As seguintes imagens mostram como os cones adicionais aparecem na tela de orientao quando esto expandidos e contrados:

cone de accesso rpido

Pode-se usar o cone de accesso rpido para rapidamente ajustar configuraes comuns.

Os itens que aparecem no menu de Acesso Rpido iro variar dependendo das aplicaes que estiver executando no momento.

As seguintes sees descrevem os itens que podem aparecer.

Nota O cone de Acesso Rpido somente aparece quando estiver executando Field-IQ ou um controlador de taxa varivel.

Configurao da barra

Use esta opo para visualizar e ajustar as seguintes configuraes:

Encher

Use esta opo para visualizar e ajustar as seguintes configuraes:

Valor ... Notas ...

Largura do implemento

Entrar a largura do implemento atual. O CFX-750 usa este valor para automaticamente calcular o espaamento entre leiras. Entrar uma largura entre 1' 00" - 328' 01" (0,30 - 99,99 m).

Limites Ver Configurar limite, pgina128.

Nmero de sees Entrar o nmero de sees que deseja controlar no implemento.Entrar um nmero entre 1 - 10.

Configurao ... Notas ...Volume atual Configurar o volume atual do tanque ou recipiente.Mtodo de encher Selecionar dentre as seguintes opes:

Encher: Para encher o tanque ou recipiente at o topo Encher Parcialmente: Para adicionar uma quantidade

especificada no tanque ou recipiente quando selecionar Encher Parcialmente Agora na tela Encher.

Encher Agora / Encher Parcialmente Agora

Usar esta opo para encher o tanque ou recipiente.

Expandidos ContradosGuia do Usurio do CFX-750 Display 37

3 IniciandoConfigurao de Troca de Seo

Use esta opo para visualizar e ajustar as seguintes configuraes:

Sobreposio no chaveamento do limite

Use esta opo para controlar a quantidade de sobreposio em um limite antes que o sistema desligue a seo da barra. Entre uma percentagem entre 1-99%.

Nota Esta configurao somente funciona quando a barra estiver soprepondo uma cabeceira, limite do piv ou zona de excluso.

Para:

Menos omisso: Configurar uma percentagem alta quando for aceitvel se aplicar fora do limite.

Menos sobreposio: Configurar uma percentagem baixa quando no desejar aplicar fora do limite. Uma configurao muito baixa pode causar alguma omisso no limite.

Latncia para ligar/desligar a vlvula

Esta opo introduz atrasos no hardware ajustando o tempo necessrio antes de ligar ou desligar as vlvulas.

Para usar esta opo:

1. Medir o tempo que leva (em segundos) para o sistema alcanar a taxa correta aps t-la ligado ou desligado.

2. Entrar um tempo entre 0,0 - 10,0 segundos.

Configurao ... Notas ...

Sobreposio no chaveamento da aplicao

Controla a quantidade de sobreposio permitida no chaveamento da barra antes do sistema chavear a seo. Entrar uma percentagem entre 1-99%.Para: Menos omisso: Configurar uma percentagem alta quando a

aplicao total for essencial. O sistema ir desligar sees quando aplicar uma percentagem alta de quaisquer reas totalmente aplicadas. Isto poder causar alguma dupla-aplicao. Sees iro ligar logo que se moverem de uma rea aplicada para uma rea no aplicada.

Menos sobreposio: Configurar uma percentagem baixa quando necessitar economizar no produto. O sistema ir desligar sees logo que alcanar uma rea aplicada. Isto pode deixar algumas omisses. Sees iro ligar quando a seo inteira se mover de uma rea aplicada para uma rea no aplicada.

Mtodo Encher Escolher dentre as seguintes opes: Encher: para encher o tanque ou recipiente at o topo Encher Parcialmente: para adicionar uma quantidade

especificada no tanque ou recipiente quando selecionar Encher Parcialmente Agora na tela Encher.

Encher Agora / Encher Parcialmente Agora

Usar esta opo para encher o tanque ou recipiente.38 Guia do Usurio do CFX-750 Display

Iniciando 3Sobreposio intenc