AÇOS INOXIDÁVEISSTAINLESS STEELS
A Villares Metals oferece uma linha completa de aços inoxidáveis, incluindo os aços convencionais, aços especiais para aplicações em implantes cirúrgicos, aços endurecíveis por precipitação e aços inoxidáveis duplex.
Devido à sua composição balanceada e à utilização de modernos processos de refino, como o VOD (“Vacuum Oxygen Decarburization”) e ESR (“Electro Slag Remelting”), os aços inoxidáveis da Villares Metals apresentam resistência à corrosão superior e uma excelente processabilidade. São utilizadas as melhores práticas de lingotamento, como lingotamento contínuo e lingotamento indireto de lingotes, comparáveis às dos melhores produtores do mundo.
Villares Metals offers a complete line of stainless steels, including common
as well as special grades, like precipitation hardening grades (PH), duplex
and alloys for surgical implants.
Due to their balanced chemical compositions and to the utilization of
modern refining process, like VOD (“Vacuum Oxygen Decarburisation”)
and ESR (“Electro Slag Remelting”) the VMSA stainless steels present
superior corrosion resistance with excellent processing performance. The
best casting practices are used, like continuous casting and indirect ingot
casting, comparable to the ones used by the best world manufacturers.
Aços Inoxidáveis - Stainless Steels
• Indústria Química e Petroquímica• Indústria de Alimentos e Bebidas• Máquinas e Equipamentos• Indústria Aeroespacial e Defesa e• Indústria de Óleo & Gás
• Chemical and Petrochemical Industries • Food and Beverage Industries • Machinery and Equipment • Aerospace and Defense Industries• Oil and Gas Segment
Aplicações - Applications
Catálogo de Inoxidáveis - Stainless Steel Catalog
VILLARES METALS
ABNT AISI
ASTM SAE
WNr DIN UNS C Si Mn P S Cr Ni Mo NbOutros Others
AplicaçõesApplications
AUSTENÍTICO / AUSTENITIC
VXM19 XM19 1.3964 X4CrNiMnMoN19-16-5 S20910 ≤ 0,06 ≤ 1,004,00 - 6,00
≤ 0,045 ≤ 0,03020,50 - 23,50
11,50 - 13,50
1,50 - 3,00
0,10 - 0,30
V = 0,10 - 0,30 N = 0,20 - 0,40
SolubilizadoSolution Annealed
or As Rolled
-690
(solution annealed)
385 (solution annealed)
55 (solution annealed)
35 (solution annealed)
BoaGood
Usado na condição solubilizado para alta resistência mecânica e corrosão sobretudo em ambientes marinhos.Tambem pode ser usado na condição de laminado para alta resistência mecânica. Usado na
indústria química e petroquímica, óleo e gás e em implantes cirúrgicos.
High corrosion and high strengh austenitic stainless steel with high Cr and Ni with aditions of Mn, Mo, Nb,V and N. It can be used at solution annealed condition, for high corrosion resistance, mainly in marine
environments. It can also be used at as rolled condition, for high strengh. It is used in chemical&petrochemical, oil&gas and naval industries and in surgical implants.
ACQUAMAR22 XM19 1.3964 X4CrNiMnMoN19-16-5 S20910 ≤ 0,06 ≤ 1,004,00 - 6,00
≤ 0,045 ≤ 0,03020,50 - 23,50
11,50 - 13,50
1,50 - 3,00
0,10 - 0,30
V = 0,10 - 0,30 N = 0,20 - 0,40
SolubilizadoSolution Annealed
or As Rolled
-690
(solution annealed)
385 (solution annealed)
55 (solution annealed)
35 (solution
annealed)
BoaGood
XM19 aço específico para aplicações náuticas, tais como eixos de hélice de barco.Condições de acabamento são mais exigidas.
XM19 steel specific for nautical applications, such as boat propeller shafts. Finishing conditionsare more tigh.
V302 302 1.4325 X9CrNi18-9 S30200 ≤ 0,15 ≤ 1,00 ≤ 2,00 ≤ 0,045 ≤ 0,03017,00 - 19,00
8,0 - 10,00
- - ≤ 0,10Solubilizado
Solution Annealed
183 515 205 40 50Boa
Good
Aço inoxidável austenítico utilizado em elementos arquitetônicos, equipamentos hospitalares e farmacêuticos, equipamentos para indústrias de alimentos e de bebidas, máquinas de embalagens,
molas, peças de tubulações, utensílios domésticos, artigos esportivos, etc.
Stainless steel used in architecture elements, hospital and pharmaceutical equipments, beverage and food industry, springs, tubes, home utensils, sportive articles, etc.
V302HQB - 1.4578 X3CrNiCuMo18-9 - ≤ 0,08 ≤ 1,00 ≤ 2,00 ≤ 0,045 ≤ 0,03017,00 - 19,00
8,0 - 10,00
- -N ≤ 0,11
CU= 3,00 - 4,00
SolubilizadoSolution Annealed
183 - - - -Boa
Good
Aço inoxidável austenítico utilizado para estampagem a frio, em condições severas,de parafusos de cabeças fendadas e grampos.
Austenitic stainless steel used in cold pressing under severe conditions, such as slotted head screws,staples.
V303 303 1.4305 X8CrNiS18-9 S30300 ≤ 0,15 ≤ 1,00 ≤ 2,00 ≤ 0,0450,15 - 0,30
17,00 - 19,00
8,0 - 10,00
- - -Solubilizado
Solution Annealed
183 - - - -Boa
Good
Aço inoxidável austenítico, porém, com 0,15% de enxofre para uma melhor usinabilidade.
Austenitic stainless steel containing a minimum of 0.15% sulfur for better machining.
V304XLUF 304L 1.4307 X2CrNi18-9 S30403 ≤ 0,03 ≤ 1,00 ≤ 2,00 ≤ 0,045 ≤ 0,03018,00 - 20,00
8,0 - 12,00
- - -Solubilizado
Solution Annealed
183 515 205 40 50Boa
Good
Aço inoxidável austenítico do tipo 18-8 que, devido ao seu teor de carbono mais baixo, apresenta ótima resistência à corrosão intergranular após a solda ou alívio de tensões. Indicado, especialmente, para fabricação
de conjuntos soldados, que não podem ser austenitizados após a solda.
Austenitic stainless steel type 18-8 that, due to its very low carbon content, shows excellent resistance to intergranular corrosion after welding or stress relieving. Specially recommended for the manufacturing of
weldedsets that cannot be austenitized after welding.
Lim
ite R
esis
t.Te
nsile
Str
engh
(M
in. M
Pa)
Dur
eza
Máx
. HB
Har
dnes
s M
ax. H
B
Lim
ite E
scoa
m.
Yiel
d S
tren
gh
(Min
. MP
a)
Est
ricçã
oA
rea
Red
uctio
n (M
in. %
)
Alo
ngam
ento
Elon
gatio
n (M
in. %
)
Sol
dab
ilid
ade
Wel
dabi
lity
Trat
amen
to T
érm
ico
Hea
t Tre
atm
ent
VILLARES METALS
ABNT AISI
ASTM SAE
WNr DIN UNS C Si Mn P S Cr Ni MoOutros Others
AplicaçõesApplications
V308L 308 1.4303 X4CrNi18-12 S30800 ≤ 0,03 ≤ 1,00 ≤ 2,00 ≤ 0,045 ≤ 0,03019,00 - 21,00
10,0 - 12,00
- -Solubilizado
Solution Annealed
183 458 175 40 50Boa
Good
Utilizado em aplicações de solda.
These steels are used in welding applications.
V310 310 1.4845 X8CrNi25-21 S31000 ≤ 0,25 ≤ 1,00 ≤ 2,00 ≤ 0,045 ≤ 0,03024,00 - 26,00
19,00 - 22,00
- -Solubilizado
Solution Annealed
- - - - -Boa
Good
Elevada resistência à corrosão e ao calor. Resiste à oxidação até temperatura de 1100 ºCquando a solicitação é intermitente.
High corrosion and heat resistance; resists oxidation up to 1100 ºC in continuous service and up to 1000 ºCwhen intermittently used.
V314 314 1.4841 X15CrNiSi25-21 S31400 ≤ 0,25≤ 1,503,00
≤ 2,00 ≤ 0,045 ≤ 0,03023,00 - 26,00
19,00 - 22,00
- -Solubilizado
Solution Annealed
183 515 205 40 50Boa
Good
Aço inoxidável austenítico utilizado em aplicações que requerem uma maior resistênciaao calor que a do aço V310.
Stainless steel used in applications that demands more heat resistance than that provided by 310.
V316UF 316 14401 X5CrNiMo17-12-2 S31600 ≤ 0,08 ≤ 1,00 ≤ 2,00 ≤ 0,045 ≤ 0,03016,00 - 18,00
10,00 - 14,00
2,00 - 3,00
-Solubilizado
Solution Annealed
183 515 205 40 50Boa
Good
Aço inoxidável austenítico com adição de molibdênio e que possui boa resistência à corrosão quando exposto à água do mar. Indicado, também, para certas aplicações em temperaturas elevadas e meios oxidantes até 900 ºC, em solicitação contínua
até 850 ºC, em trabalho intermitente.
Austenitic stainless steel with added molybdenum, which has a good corrosion resistance when exposed to seawater. Also indicated for certain applications at high temperatures and oxidizing environments up to 900 ºC in continuous service,
and up to 850 ºC in intermittent service.
V316XLUF 316L 1.4404 X2CrNiMo17-12-2 S31603 ≤ 0,03 ≤ 1,00 ≤ 2,00 ≤ 0,045 ≤ 0,03016,00 - 18,00
10,00 - 14,00
2,00 - 3,00
-Solubilizado
Solution Annealed
183 515 205 40 50Boa
Good
Aço similar com aplicação idêntica à do aço V316, porém, com teor de carbono bem mais baixo, o que o torna bem mais resistente à corrosão intergranular após o alívio de tensões. Indicado para fabricação de conjuntos soldados que não
podem ser austenitizados após a solda.
Similar steel with application identical to V316, but with much lower carbon content, which makes itmore resistant to intergranular corrosion after stress relieving. Recommended for the manufacturing of welded sets that cannot
be austenitized after welding.
V321 321 1.4541 X6CrNiTi18-10 S321000 ≤ 0,08 ≤ 1,00 ≤ 2,00 ≤ 0,045 ≤ 0,03017,00 - 19,00
9,00 - 12,00
- ≤ 0,70CX5 ≤ Ti
SolubilizadoSolution Annealed
183 515 205 40 50Boa
Good
Aço inoxidável estabilizado com Ti e utilizado em aplicações similares às do aço V304L.
Austenitic stainless steel stabilized with Ti, used in applications similar to those of the V304L steel.
V347 347 1.4543 X6CrNiNb18-10 S347000 ≤ 0,08 ≤ 1,00 ≤ 2,00 ≤ 0,045 ≤ 0,03017,00 - 19,00
9,00 - 12,00
-10xC≤ 1,10
SolubilizadoSolution Annealed
183 515 205 40 50Boa
Good
Aço inoxidável estabilizado com Nb e utilizado em aplicações similares às dos aços V321 e V304L.
Austenitic stainless steel stabilized with Nb, and used in applications similar to those of V321 and V304L steels.
Lim
ite R
esis
t.Te
nsile
Str
engh
(M
in. M
Pa)
Dur
eza
Máx
. HB
Har
dnes
s M
ax. H
B
Lim
ite E
scoa
m.
Yiel
d S
tren
gh
(Min
. MP
a)
Est
ricçã
oA
rea
Red
uctio
n (M
in. %
)
Alo
ngam
ento
Elon
gatio
n (M
in. %
)
Sol
dab
ilid
ade
Wel
dabi
lity
Trat
amen
to T
érm
ico
Hea
t Tre
atm
ent
VILLARES METALS
ABNT AISI
ASTM SAE
WNr DIN UNS C Si Mn P S Cr Ni Mo Cu Nb TiOutros Others
AplicaçõesApplications
FERRÍTICOS*
V430FG 430F 1.4105 X6CrMos17 S43020 ≤ 0,06 ≤ 1,00 ≤ 1,00 ≤ 0,0400,28 - 0,30
16,00 -18,00
≤ 0,50 ≤ 0,20 - - - - Recozido 183 - - - -
Inclui peças na indústria automotiva, aplicações decorativas, utensílios de cozinha, peças em indústria de ácido nítrico e refinarias com óleo de alto enxofre, fixadores, peças de queimadores.
It includes parts in the automotive industry, decorative applications, kitchen utensils, parts in nitric acid plants and high sulfur oil refineries, fasteners, parts of fuel oil burners.
MARTENSÍTICOS**/MARTENSITIC
N4123 - 1.4123 X40CrMoVN16-2 S420250,38 - 0,50
≤ 1,00 ≤ 1,00 ≤ 0,040 ≤ 0,01514,00 - 16,00
≤ 0,501,00 - 2,50
- - -N = 0,10
- 0,30 V ≤ 1,50
RecozidoAnnealed
280 - - - -Boa
Good
Aço inoxidável martensítico com alto C e adições de Mo e N que fornecem elevada resistência mecânica e alta resistência à corrosão. Usado em peças de bicos de injeção bicombustível.
Martensitic stainless steel with high C and additions of Mo and N which provide high strengh and high corrosion resistance. Used in bi-fuel injection nozzles parts.
N4923 - 1.4923 X22CrMoV12-1 -0,18 - 0,24
≤ 0,500,40 - 0,90
≤ 0,025 ≤ 0,01511,00 - 12,50
0,30 - 0,80
0,80 - 1,20
- - -V = 0,25 - 0,35
Recozido ou Temperado e RevenidoAnnealed or Quenched &Tempered
- - - - -Boa
Good
Aço inoxidável martensitico com Ni, Mo e V para alta temperabilidade e utilização em temperaturas médias elevadas. Usado em lâminas de turbina.
Martensisitc stainless steel wiht Ni, Mo and V for high hardenability and use at medium-elevated temperatures. Used in turbine blades.
VC150 420 1.4021 X20Cr13 S420000,30 - 0,37
≤ 1,00 ≤ 1,00 ≤ 0,040 ≤ 0,03012,00 -14,00
- - - - - -Annealed or Quenched &Temperedv
241 - - - -Boa
Good
Aço padrão para facas de mesa e cutelaria em geral. Possui alta resistênciaà corrosão quando temperado.
Standard steel for table knives and cutlery in general. High corrosion resistance when hardened.
V416 416 1.4005 X12CrS13 S416000,11 -0,15
≤ 1,00 ≤ 1,25 ≤ 0,060 ≤ 0,06012,00 -14,00
- - - - - -Annealed or Quenched &Temperedv
197 - - - -BaixaLow
Aço martensítico resistente à corrosão, similar ao aço VC140 e com adição de enxofrepara melhor usinabilidade.
Corrosion resistant martensitic steel, similar to VC140, with addition of sulfur for better machinability.
V420F 420F 1.4029 X30CrS13 S420200,30 -0,40
≤ 1,00 ≤ 1,25 ≤ 0,0600,15 -0,25
12,00 -14,00
≤ 0,50 ≤ 0,60 - - - -Annealed or Quenched &Temperedv
223 - - - -BaixaLow
Aço inoxidável martensítico, similar ao aço VC150, com adição de enxofre para melhor usinabilidade.
Martensitic stainless steel, similar to VC150, with addition of sulfur for better machinability.
V431 431 - - -0,12 -0,20
≤ 1,00 ≤ 1,00 ≤ 0,040 ≤ 0,03015,00 -17,00
1,50 -2,50
- - - - -Annealed or Quenched &Temperedv
285 - - - -Boa
Good
Aço inoxidável martensítico, com adição de Ni para melhorar as propriedades de corrosão, sua tenacidade e temperabilidade.
Martensitic stainless steel with Ni adition in order to improve corrosion properties, as well as toughness and hardenability.
V440BC 440B 1.4112 X90CrMoV18 S440030,80 -1,05
≤ 1,00 ≤ 1,00 ≤ 0,040 ≤ 0,03016,00 -18,00
- ≤ 0,75 - - - -Annealed or Quenched &Temperedv
269 - - - -Boa
Good
Aço inoxidável martensítico, de alto teor de C para mais alta dureza,utilizado principalmente em cutelaria.
Martensitic stainless steel with a high C content for greater hardness; used mainly in cutlery.
*Todos os aços pertencentes ao grupo dos ferríticos possuem tratamento térmico de recozimento. ** Todos os aços pertencentes ao grupo dos martensíticos possuem tratamento térmico de recozimento ou têmpera e revenimento.
*All ferritic grades are solution annealed.** All martensitic grades have heat treatment of quenching and tempering or soft annealing.
Lim
ite R
esis
t.Te
nsile
Str
engh
(M
in. M
Pa)
Dur
eza
Máx
. HB
Har
dnes
s M
ax. H
B
Lim
ite E
scoa
m.
Yiel
d S
tren
gh
(Min
. MP
a)
Est
ricçã
oA
rea
Red
uctio
n (M
in. %
)
Alo
ngam
ento
Elon
gatio
n (M
in. %
)
Sol
dab
ilid
ade
Wel
dabi
lity
Trat
amen
to T
érm
ico
Hea
t Tre
atm
ent
VILLARES METALS
ABNT AISI
ASTM SAE
WNr DIN UNS C Si Mn P S Cr Ni Mo Cu Nb TiOutros Others
AplicaçõesApplications
ENDURECÍVEL POR PRECIPITAÇÃO/PRECIPITATION HARDENING
ACQUAMAR 17
630 (17-4PH)
1.4542 X5CrNiCuNb17-04 S17400 ≤ 0,07 ≤ 1,00 ≤ 1,00 ≤ 0,04 ≤ 0,0315,00 - 17,50
3,00 - 5,00
≤ 0,503,00 - 5,00
0,15 - 0,45
- -
Solubilizado ou SolubilizadoEnvelhecido
Solution Annealed or Solution Annealed + Aged
363(solubili-
zado) (solution
annealed)
- - - -Boa
Good
17-4PH aço específico para aplicações náuticas, tais como eixos de hélice de barco.Condições de acabamento são mais exigidas.
17-4PH steel specific for nautical applications, such as boat propeller shafts. Finishing conditions are more tigh.
N4540 XM-12 1.4545 X5CrNiCu15-5 S15500 ≤ 0,07 ≤ 1,00 ≤ 1,00 ≤ 0,04 ≤ 0,0314,00 - 15,00
3,50 - 5,50
- -2,5 - 4,5
0,15 - 0,45
-
Solubilizado ou SolubilizadoEnvelhecido
Solution Annealed or Solution Annealed + Aged
363 - - - -Boa
Good
Aço inoxidável endurecível por precipitação, de matriz martensítica de baixo carbono, que apresenta ultra-alta resistência mecânica associada à boa tenacidade. Utilizado em componentes e peças estruturais que necessitam de resistência à corrosão nas indústrias química, de papel & celulose, alimentos, O&G e,
principalmente, aeronáutica. Utilizado desde em componentes das asas até em pequenas buchas.
Precipitation Hardenable stainless steel, with a low carbon martensite microstructure, which has ultra-high tensile strength with good toughness. Used as structural components and parts which require corrosion resistance in
chemical, paper, food, Oil&Gas and, mainly, Aerospace industries. It is used as wing components and several bushings.
N4534 XM-13 1.4534 X3CrNiMoAl13-8-2 S13800 ≤ 0,05 ≤ 0,10 ≤ 0,20 ≤ 0,01 ≤ 0,00812,25 - 13,25
7,50 - 8,50
-2,00 - 2,50
- -AI-0,90 -
1,35
Solubilizado ou SolubilizadoEnvelhecido
Solution Annealed or Solution Annealed + Aged
363 - - - -Boa
Good
Aço inoxidável endurecível por precipitação, de matriz martensítica de baixo carbono, com resistência mecânica superior em relação ao aço N4540 mantendo boa tenacidade. Mais indicado para aplicações que
exigem tenacidade em seções de maior diâmetro e no sentido transversal. Resistência à corrosão similar à do aço inoxidável austenítico 304L. Apesar de ser utilizado em diversos segmentos, como o N4540, é na indústria
aeroespacial que encontra suas principais aplicações. Componentes estruturais do trem de pouso e pinos fusíveis do pilone (estrutura que une a fuselagem do motor à asa) são exemplos de peças feitas deste aço.
Precipitation Hardenable stainless steel, with a low carbon martensite microstructure, with tensile strength higher than N4540 steel keeping good toughness. More indicated for applications which require toughness in large sections
and in transverse direction. Corrosion resistance similar of the austenitic stainless steel 304L. Although used in several segments, like N4540, it is in the Aerospace industry that this steel has your main applications. Landing Gear
structural components and pylon screws are examples of parts produced with this steel.
V630630
(17-4PH)1.4542 X5CrNiCuNb17-04 S17400 ≤ 0,07 ≤ 1,00 ≤ 1,00 ≤ 0,04 ≤ 0,03
15,00 - 17,50
3,00 - 5,00
- ≤ 0,50 3 - 5 - Nb+Ta0,15/0,45
Solubilizado ou SolubilizadoEnvelhecido
Solution Annealed or Solution Annealed + Aged
363 - - - -Boa
Good
Aço inoxidável endurecível por precipitação. Possui excelente combinação de resistência mecânica e resistência à corrosão. Tem grande estabilidade dimensional e é usado em peças de aeronaves,
equipamentos de campo de petróleo e numerosas aplicações.
Precipitation hardening stainless steel. It has an excellent combination of mechanical andcorrosion resistance. Great dimensional stability and it is used in aircraft parts, oil field
equipment and numerous applications.
V631 631 1.4568 X7CrNiAl17-7 S17700 ≤ 0,09 ≤ 1,00 ≤ 1,00 ≤ 0,04 ≤ 0,0316,00 - 18,00
6,50 - 7,75
- - - -Al=0,75
/1,50
Solubilizado ou SolubilizadoEnvelhecido
Solution Annealed or Solution Annealed + Aged
229 - - - -Boa
Good
Aço inoxidável semi-austenítico, endurecível por precipitação. Apresenta valores excepcionalmente elevados de resistência mecânica, associados às boas características de resistência à corrosão. É
recomendado para molas, arruelas de pressão, rolamentos, instrumentos cirúrgicos, etc.
Semi austenitic precipitation hardening stainless steel. It presents high mechanical strength as well as good corrosion resistance. It is used for springs, bearings, surgical instruments, etc.
Lim
ite R
esis
t.Te
nsile
Str
engh
(M
in. M
Pa)
Dur
eza
Máx
. HB
Har
dnes
s M
ax. H
B
Lim
ite E
scoa
m.
Yiel
d S
tren
gh
(Min
. MP
a)
Est
ricçã
oA
rea
Red
uctio
n (M
in. %
)
Alo
ngam
ento
Elon
gatio
n (M
in. %
)
Sol
dab
ilid
ade
Wel
dabi
lity
Trat
amen
to T
érm
ico
Hea
t Tre
atm
ent
Todos os aços pertencentes ao grupo dos endurecíveis por precipitação possuem tratamento térmico de solubilização ou solubilização e envelhecimento.
Todos os aços pertencentes ao grupo dos duplex possuem tratamento térmico de solubilização.*o aço N4462 atende NORSOK M650 e M630 MDS D47 para barras redondas de até 152,40 mm.
All the steels belonging to the super duplex group undergo solution annealing heat treatment.* The N4507 steel meets NORSOK M650 and M630 MDS D57 for round bars of up to 152.40 mm (6”).* The N4501 steel meets NORSOK M650 and M630 MDS D57 for round bars of up to 254.00 mm (10”).** The N4462 steel meets NORSOK M650 and M630 MDS D47 for round bars of up to 152.40 mm.
Lim
ite R
esis
t.Te
nsile
Str
engh
(M
in. M
Pa)
Dur
eza
Máx
. HB
Har
dnes
s M
ax. H
B
Lim
ite E
scoa
m.
Yiel
d S
tren
gh
(Min
. MP
a)
Est
ricçã
oA
rea
Red
uctio
n (M
in. %
)
Alo
ngam
ento
Elon
gatio
n (M
in. %
)
Sol
dab
ilid
ade
Wel
dabi
lity
Trat
amen
to T
érm
ico
Hea
t Tre
atm
ent
Todos os aços pertencentes ao grupo de aplicações especiais possuem tratamento térmico de solubilização ou solubilização e envelhecimento.
Todos os aços pertencentes ao grupo de superduplex possuem tratamento térmico de solubilização.*o aço N4501 e N4507 atendem NORSOK M650 e M630 MDS D57 para barras redondas de até 182,00 mm (6”).
VILLARES METALS
ABNT AISI
ASTM SAE
WNr DIN UNS C Si Mn P S Cr Ni Mo Cu Nb TiOutros Others
AplicaçõesApplications
DUPLEX
N4462** F60/2205 1.4462 X2CrNiMoN22-5-3S32205S31803
≤ 0,03 ≤1,00 ≤ 2,00 ≤ 0,035 ≤ 0,01521,00 - 23,00
4,50 - 6,50
-2,50 - 3,50 - - N ≤ 010 Solubilizado
Solubilized 270 650/880 450 - 25 -
Aço inoxidável duplex (austenítico-ferrítico) que apresenta resistência mecânica e à corrosão superiores à dos aços austeníticos. Aço duplex de uso geral na indústria petroquímica.
Duplex austeno-ferritic stainless steel that shows mechanical and corrosion resistance higher than theaustenitic steel. Duplex steel for general use in the petrochemical industries.
N4460UF F52/329 1.4460 X3CrNiMoNbN S32900 ≤ 0,05 ≤1,00 ≤ 2,00 ≤ 0,035 ≤ 0,03025,00 - 28,00
4,50 - 6,50
-1,30 - 2,00
- -N = 0,25/
0,50- - - - - - -
Aço inoxidável duplex (austenítico-ferrítico) que apresenta resistência mecânica e à corrosão superiores à dos aços austeníticos e é utilizado principalmente na indústria de papel e celulose.
Duplex austeno-ferritic stainless steel that shows mechanical and corrosion resistance higher than theaustenitic steel. It is mainly used in the pulp and paper industries.
APLICAÇÕES ESPECIAIS
VI138 - - - - ≤ 0,03 ≤ 0,75 ≤ 2,00 ≤ 0,025 ≤ 0,01017,00 - 19,00
13,00 - 15,00
2,25 - 3,50
≤ 0,10≤ 0,50
- - N ≤ 010Solubilizado
Solution Annealed
- 490 190 - 40 -Para uso em placas, parafusos e arames para implantes cirúrgicos.
Used in plates, screws and wire for surgical implants.
VI58329 - - - - ≤ 0,08 ≤ 0,752,00 - 4,25
≤ 0,025 ≤ 0,01019,50 - 22,00
9,00 - 11,00
2,00 - 3,00
≤ 0,250,25 - 0,80
-N = 0,25/
0,50
Solubilizado Solution Annealed
- 740 430 - 35 -
Aço inoxidável usado na fabricação de implantes cirúrgicos que exigem resistência mêcanica e resistência à corrosão superiores às do aço Vl138.
Stainless steel used in the manufacturing of surgical implants that require mechanical and corrosionresistance higher than that of the VI138 steel.
VAT286 660 1.4980 X6NiCrTiMoVB25-15-2 S66286 ≤ 0,08 ≤ 0,08 ≤ 2,00 ≤ 0,040 ≤ 0,03013,50 - 16,00
24,00 - 27,00
1,00 - 1,50
- -1,90 - 2,35
V = 0,10/0,50
B = 0,001/0,010
Al ≤ 0,35
Solubilizado Solution Annealed
≤ 220 - - - - -
Liga endurecível por precipitação e com altas propriedades mecânicas. Tem boa resistencia à oxidação até700 °C. Usada em componentes de turbinas, eixos, parafusos, porcas e peças para bombas. É também usada
em ferramentária para trabalho a quente, em extrusoras de cobre e matrizes para fundição de alumínio.
Precipitation hardening alloy with advanced mechanical properties. Good oxidation resistance up to 700 ºC.Used in turbine components, axles, screws, nuts and pump parts. Used also in tooling for hot forging,
in copper extruding and dies for aluminum casting.
SUPERDUPLEX
N4501* A 182 GRADE F55 1.4501 X2CrNiMoN25-7-4 S32760 ≤ 0,03 ≤ 1,00 ≤ 1,00 ≤ 0,030 ≤ 0,010
24,00 - 26,00
6,00 - 8,00
-3,0 - 4,0
- - - SolubilizadoSolubilized 270 760 550 45 25
BoaGood Aços inoxidáveis superduplex (PREN = 40) que apresentam resistência mecânica, resistência à corrosão e
tenacidade à baixa temperatura superiores aos aços inoxidáveis duplex comuns. Apresenta elevada resistência à corrosão por pites e a ambientes que contêm cloretos. É utilizado principalmente em plataformas marítimas
de extração de petróleo, óleo e gás, como em bombas, válvulas, flanges e tubulações.
Super duplex stainless steel (PREN = 40) that shows mechanical resistance and corrosion resistance atlow temperatures, higher than the common duplex stainless steels. It has a high pitting corrosion resistance and it is resistant to chlorine containing environment. It is mainly used in offshore oil producing platforms, oil
and gas, used in pumps, valves, flanges and tubing.
VDF53 A 182GRADE F53 1.4410 X2CrNiMoN25-7-4 S32750 ≤ 0,03 ≤ 0,80 ≤ 1,20 ≤ 0,035 ≤ 0,020
24,00 - 26,00
6,00 - 8,00
-3,0 - 5,0
- - - SolubilizadoSolubilized 310 760 515 - 15
BoaGood
N4507* A 182 GRADE F61 1.4507 - S32550 ≤ 0,03 ≤ 0,70 ≤ 2,00 ≤ 0,035 ≤ 0,015
24,00 - 26,00
5,5 - 7,5
-2,7 - 4,0
- - - SolubilizadoSolubilized 297 760 550 15 -
BoaGood
All the steels belonging to the super duplex group undergo solution annealing heat treatment.* N4501 and N4507 comply with NORSOK M650 and M630MDS D57 for bars whose diameter are up to 182 mm (6”).
Aços e Padrões EspeciaisSpecial Steels and Standards
Na tabela de composição química, está listado o grau de designação dos principais aços produzidos pela Villares Metals, a sua correspondência com as normas internacionais e suas características e aplicações básicas.
The Chemical Composition table lists the naming criteria for the main steels manufactured by Villares Metals, as well as their correspondence to international standards, their characteristics and basic applications.
Acabamento Bruto:• Endireitado• DecapadoEmpenamento: 2 mm/mComprimentos Padrão:• Barras e Perfis Laminados: 3.000 a 6.000 mm• Amplitude Mínima de Corte: 500 mm
Acabamento: Finished:• Fresado na largura e bruto na espessura. /Short sides milled and wide sides hot rolled.
Rough Finish: - Straightened- PickledStraightness: 2 mm/mStandard Lengths:- Rolled Bars and Shapes: 3,000 to 6,000 mm - Minimum Cutting Amplitude: 500 mm
ProdutosProducts
Barras e Perfis LaminadosRolled Bars and Shapes
SEÇÃO/SECTION BITOLA/GAUGE TOLERÂNCIA/TOLERANCE
REDONDO/ROUND 5,00 a 203,20 DIN EN 10060
QUADRADO/SQUARE 17,46 a 53,98 DIN EN 10059
SEXTAVADO/HEXAGON 17,46 a 53,98 DIN EN 10058
RETANGULAR/RECTANGULAR DIN EN 10058
Largura/Width
Contimill
Flat Rolling Block
70
40
20
25011020Esp
essu
ra/T
hick
ness
Dimensões e tolerâncias padrões/Dimensions and standard tolerances:
Largura/Width
150
55
400250Esp
essu
ra/T
hick
ness
Acabamento a FrioComprimentos Padrões: • Barras e Perfis Laminados - 3.000 a 6.000 mm • Barras e Perfis Forjados - 1.500 a 5.000 mm • Amplitude Mínima de Corte - 500 mm
Empenamento: 1,0 mm/metro
Cold FinishedStandard Lengths: • Rolled Bars and Shapes - 3,000 mm to 6,000 mm
• Forged Bars and Shapes -1,500 to 5,000 mm • Minimum Cutting Amplitude - 500 mm
Warping : 1.0 mm/meter
Barras e Perfis Laminados e Forjados - Forged and Rolled Bars and Shapes SEÇÃO/SECTION BITOLA/GAUGETOLERÂNCIA
/TOLERANCE
REDONDO/ROUND
TREFILADO/COLD DRAW
6,00 a 15,87 ISO h11
RETIFICADO/PEELED
14,00 a 74,00 ISO h9
DESCASCADO/TURNED
09,00 a 63,49 ISO h11
63,50 a 101,60 ISO h13
101,61 a 147,00 +0,50/-0
147,01 a 240,00 +1,00/-0
TORNEADO/COLD DRAW
240,01 a 760,00 +3,00/-0
SEXTAVADO/HEXAGON
TREFILADO/COLD DRAW
12,70 a 52,39 ISO h11
QUADRADO/SQUARE
TREFILADO/COLD DRAW
12,70 a 52,39 ISO h11
FRESADO/MILLED
115,00 a 680,00 + 3,00/-0
RETANGULAR/RECTANGULAR
TREFILADO/COLD DRAW
Espessura = 8,00 a 40,00Largura = 25,00 a 100,00
ISO h11
RETANGULAR/RECTANGULAR
FRESADO/MILLED
Largura/Width
940
800
600
600115 130 400Esp
essu
ra/T
hick
ness
+3/-0
Dimensões, Acabamento e Tolerâncias Padrões - Dimensions, Surface Finishes and Standard Tolerances:
Os produtos USIFAC minimizam o atrito entre o aço/peça a ser usinado e a ferramenta, com consequente redução do desgaste da ferramenta e diminuição da temperatura na aresta de corte. Ampliam o campo de trabalho, permitindo velocidade de corte e avanços muito superiores aos alcançados com produtos convencionais, com uma formação de cavacos extremamente favorável, além de um acabamento superficial de melhor qualidade.
The USIFAC products minimize the friction between the steel/part to be machined and the tool, with a resulting reduction in tool wearing and temperature decrease in the cutting edge. They do amplify the working field, allowing for much superior cutting speeds and material feed much higher than the ones attained with conventional products, and with an extremely favorable shaving formation, besides a surface finish of a better quality.
Linha USIFAC - USIFAC Line
Acabamento Superficial: brutas, decapadas quimicamente. Surface finish: as rolled, chemically pickled.
Fio-máquina de Perfil Redondo Laminado a Quente -Hot Rolled Wire Rod.
ACABAMENTO/FINISHING DIÂMETRO (mm)/DIAMETER TOLERÂNCIA/TOLERANCE
BRUTO/ASS ROLLE5,00 a 17,46 DIN EN 10060
DECAPADO/PICKLED
Oferecemos também fio-máquina Shavilitado (descascado) nos diámetros de 6,30 a 13,00 mm.
USINABILIDADE/MACHINABILITY
RE
SIS
TÊN
CIA
À C
OR
RO
SÃ
O/C
OR
RO
SIO
N R
ES
ISTA
NC
E
316 USIFAC 316
USIFAC 304304
303
430V430FG
416410
Os produtos Villares Metals, como barras e fio-máquina, podem ser fornecidos com os seguintes processos de acabamento, dentro das faixas de bitolas e tolerâncias aplicadas a cada produto:
The Villares Metals products, such as bars and wire rods, can be supplied with the following finishing processes, within the gauge range and tolerances applicable to each product:
Acabamentos Superficiais - Finishing
• Decapado Quimicamente• Trefilado• Retificado• Fresado• Torneado• Descascado• Endireitado
• Chemically pickled• Ground• Turned• Straightened• Drawn• Milled• Peeled
Out
ubro
/201
4
55 19 [email protected]@villaresmetals.com.br
villaresmetals.com.brRua Alfredo Dumont Villares, 155Jardim Santa Carolina - Sumaré/SPCEP 13178-902 | Brasil