R
A u t o m a t i s i e r u n g s t e c h n i k
HbmG
AnalyserP essure
°C
eT mperatu
re
0
1
F li l level
nI terpreta
tio
n20.120.120.1
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmG
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • http://Internet www.seli.de
Preface
The management of seli GmbH Automatisierungstechnik
Formation and aims
I
The company today
Make use of our experience for your succes.
.
Especially developments and fabrication of products n 1990, the company seli Automatisierungstechnik for measurement engineering and control
was formed as Ltd. One aim of the company was, engineering can be taken as a characteristic of this.
among others, to establish an alternative supplier of Here, products and solutions could only be realized components used in automation technology. Here, the by long-time experience and our good customer
contact.priority objective was to guarantee complete technical
advisory service both on office duty and on-site. The
company also placed special emphasis on the
development and fabrication of products right from the
beginning. The target group primarily consisted of
industrial final consumers.
Today, the company seli, employing more than 30
members of staff, is one of the biggest system houses
for automation technology and a well-known producer
of measurement technology in the industry.
Another important domain of seli was created by our
customers` requests.One of the main pillars of the company is the
Services like the re-calibration of test media, the representation or distribution of well-known business creation of customised systems engineering and the associates.realisation of integrated solutions nowadays have been part of our business for a couple of years.
Here, not only obtaining products for the industry is Our employees will assist you by giving advisory as well as practical support important also the application on-site by our technical
field service is an absolute “must” for our company.
The know-how that our employees have gained in
many years is an important reason for many customers
for the successful and trust-based cooperation.
seli has set new directions in the fields of e-commerce
and e-procurement.
Special action directed at the target groups has led to us
becoming a specialist for the food industry and the
drinks and tobacco industry during the last couple of
years.
seli GmbH Automatisierungstechnikcentral officeDieselstraße 1348485 NeuenkirchenTel. 05973 / 9474-0Fax 05973 / 9474-74E-Mail [email protected] http://www.seli.de
seli GmbH Automatisierungstechnik
Dieselstraße 1348485 NeuenkirchenTel. 05973 / 9474-0Fax 05973 / 9474-74E-Mail [email protected] http://www.seli.de
central office
The development of the company
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmG
Central Office Order handling andtechnichal support
Accounting and controllingStore and Dispatch
Final assembly and fabrication
Mechanical and electronicalfabrication
Seminar Center
Mounting, computercontrolled calibribration and temperature compensation
Mounting, final checkwith calibribration-report
Quality check
Central Office in Neuenkirchen
Insides of the fabrication
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. (49) (0) 5973 / 9474-0 • Fax (49) (0) 5973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
This one works any time
Protective fitting with spherical welding sleeve (Diameter 25 mm), protective pipe diameters 6 x 1 mm from material 1.4571 (V4A). This execution is locked to the process The high-grade steel connection head can be connected with different connecting pieces with the protective fitting. With changeable measuring element, temperature of the process -50 °C bis +400 °C (other temperature fields on request)
u
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmG
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
Temperature Measurement
Type TF 14
The universal one
Welding sleeve system with modular process connections
Aseptic measuring point Freely programmable sensor-head transducer
optional Wetting parts made of high-grade steel
Material No. 1.4404 FDA, EHEDG-conformal
u
u
u
u
u
Type TF 35
Type TF 43The small one
Compact design Variable depth of sensor immersion Aseptic measuring point Measuring transducer optional Wetting parts made of high-grade steel
Material No. 1.4404
FDA, EHEDG-conformal
u
u
u
u
u
u
Type TF 45The cheap one
Welding sleeve system with modular process connections
Aseptic measuring point Measuring transducer optional Wetting parts made of high-grade steel
Material No. 1.4404 FDA, EHEDG-conformal
u
u
u
u
u
°C
eT mperatu
re
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmG
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
Pressure measurement
Type SDT 01
Type SDT 02
The universal
u
u
u
u
u u
u u
Thick-film ceramic sensor High accuracy High temperature range Nominal pressure ranges
from -1 bar to 400 barAbsolute and relative pressureWetting parts made of high-grade steel
No. 1.4305, FKM, ceramics A1203Gehäuse aus Edelstahl 1.4305Case made of high-grade steel
The cheap one for food and pharma
High temperature range Nominal pressure ranges up to 40 barRelative pressurePC-telecontrolled parametrizableWetting parts made of high-grade steel 1.4435Housing made of high-grade steel 1.4404Fourfold overloadTotally front-flush membraneModular process connection technologySpecial units possibleFDA, EHEDG-conformal
u
u
u u u u u u u u u
The universal for food & pharma
High accuracy High temperature range Nominal pressure ranges up to 40 barRelative pressureAbsolute pressureManually zeroingTriple overloadTotally front-flush membraneWetting parts made of high-grade steel
No. 1.4435 und 1.4404Case made of high-grade steel 1.4301, 1.4305Modular process connection technologySpecial units possibleFDA, EHEDG-conform
u
u
u
u u u u u u
u u u u
rP essure
Type SDT 12
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmG
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
Pressure measurement
Type SDT 03
Type SDT 09
The modular one for food & pharma
High accuracy High temperature range Nominal pressure ranges up to 40 barRelative pressureIntegrated control + indicator display optionalProgrammable on unit or PC-telecontrolled
parametrizableVery quick compensation of temperature jumpWetting parts made of high-grade steel 1.4435Housing made of high-grade steel 1.4404individual mesuring range adjustmentsmallest measuring range 100 mbarTurndown 4:1Fourfold overloadAbsolute front-flush membraneModular process connection technologySpecial units possibleFDA, EHEDG conformal
u
u
u
u u u
u u u u u u u u u u u
The unit to dive
Less temperature error Very good linearity Long-time stability Accuracy at IEC 60770: 0,35% FSO High-grade steel sensorSmall diameter of 27 mmMeasuring of liquid level in water and clean or/
and dirty mediaEffective range from 0...40 mbar to 0...25bar
u
u
u
u
u
u u
u
rP essure
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmGFill level measurement
The universal one
Limit switch of the fill level for liquids Adjustable for various media
Welding sleeve system with modular process connections
Aseptic measuring point defined position of the gland Wetting parts made of high-grade steel
Material No. 1.4404
u
u
u
u
u
u FDA, EHEDG-conformal
Type SMW
The conductive ones
Welding sleeve system with modular process connection
Aseptic measuring point Elektrodes free cuttable Wetting parts made of high-grade steel
Material No. 1.4404 1-3 electrodes Deliverable with level module optional FDA, EHEDG-conformal
u
u
u
u
u
u
u
Type KS 15/25/35
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
The intelligent one
Particularly suitable for the fill level measuring in small-sized blending tanks with viscous, paste-like and highly adhesive media
Application in all electrically conductive media with a minimum conductivity of 1µS/cm
Automatic detection of the fitting position top/bottom
Device completely made of high-grade steel 1.4404
Compact Design with integrated evaluation circuit 4...20mA
FDA, EHEDG-conformal
u
u
u
u
u
u
Type SMP
Type KS 17The alternative
Welding sleeve system GEA Tuchenhagen without polymer-seal
Aseptic measuring point possible Elektrodes free cuttable Wetting parts made of high-grade steel
Material No. 1.4404 Electrode Ø 10 mm optional: integriated level module FDA, EHEDG-conformal
u
u
u
u
u
u
u
0
1
F li l level
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmGConductivity measuring
Type SLI
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
The universal conductivity measuring
Measuring system for conductivity measurement in processes
small compact construction Installation in pipings ex nominal width DN 40 Effective range free configurable, reversible Device completely made of high-grade steel
1.4301 LCD display for conductivity, temperature
and handling Extremely fast response time FDA, EHEDG-conformal
u
u
u
u
u
u
u
u
Analyse
The compact turbidity measurement
u
u
u
u
u
u
u
u
u
u
u
u
Phase-SeparationQick product-changeReduced costs for waste waterFilter-monitoringColour-independent concentration measure-
mentCompact Design with integrated electronic
and display for parameterisationRobust saphir-windows, CIP/SIP-suitableHygienc Design, polymerfree-sealing
systemLED-light, stable and durable signal
guaranteedIntegrated digital- and analog-outputSimple parameterizationProcess-monitoring and documentation
Type STS 01
Type STS 02The clean turbidity measurement
u
u
u
u
u
u
u
u
u
u
u
u
u
Automatic Cleaning possible by use of Process Fitting SAW-830
Securely Phase-SeparationQicker product-changesReduced costs for waste waterFilter-monitoringColour-independent concentration measure-
mentCompact Design with integrated electronic
and display for parameterisationRobust saphir-windows, CIP/SIP-suitableHygienc Design, elastomer-free sealing
systemLED-light, stable and durable signal
guaranteedIntegrated digital- and analog-outputSimple parameterizationProcess-monitoring and documentation
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmGConductivity measuring
Type SAS 310
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
Analyse
The static holder
For all kind of Ø12/120 with thread PG13,5 (pH-,Glas-,ISFET-,CO2-, Redox- and other sensors)
Chemikal industryFood industryPharmaceutical industryWater treatmant
u
u
u
u
u
Type SAW 830The retractable holder
For all kind of 12/225 mm or Ø12/280 with thread PG13,5 (pH-,Glas-,ISFET-,CO2-, Redox- and other sensors)
Food industryPharmaceutical industryRequirement of automated sensor cleaning
or calibration
u
u
u
u
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmGCleaning- / Monitoring Sensors
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. (49) (0) 5973 / 9474-0 • Fax (49) (0) 5973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
Typ SOR
Typ SRS
The only one for orbital cleaning plants
u
u
u
Welding Sleeve System with modular process connections
Aseptic Measuring point Wetted parts made of peek
u
u
FDA, EHEDG-conformal For controling of orbital cleaning plants
The only one for rotational cleaning plants
u
u
u
u
welding sleeve-system with modular process connections
aseptic measuring point wetting parts made of peek further settings via PC and programming
interface (optional)u
u
FDA, EHEDG-conformal For controling of rotational cleaning plants
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmGEvaluation electronics
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
The universal measuring transducer
Universal power supply 24 VAC/DC - 230 VAC/ 250 VDC
Galvanic separation of all In-/Outputs/ auxiliary power
Universal input for RTD (Pt100 etc), TC Potentiometer, Lin. R, mA and V
2-wire sensor supply
2 relays-output and analogue output (mA, V)
Programmable per optionally frontdisplay
5 years guarantee
u
u
u
u
u
u
u
Type SMU
The compact measuring transducer
4..20 mA measuring transducer for Pt100 sensors
Connection in 2-, 3- or 4-wire technology
Accuracy < 0,25 °C
Correction of the actual value
Automatic/configurable cable resistance compensation (2-wire)
Sensor error detection
Programmable linearization, absorption infor- mation of condition and serial number
PC datalogging
u
u
u
u
u
u
u
u
Type MUK
20.120.120.1
nI terpreta
tio
n
The switching device just in case
Processor-controlled level switchsUp to 4 level-probes + earth probe
single level level control wire breakage detection parameter switching
Wide-range power supply unitPC-configurable (optional)
process monitoring + documentation incl.
u
u
u
u
Type SNG-1
Type MUK-VGThe measuring transducer with housing
4..20 mA measuring transducer for Pt100 sensors
Connection in 2-, 3- or 4-wire technology
Accuracy < 0,25 °C
Correction of the actual value
Automatic/configurable cable resistance compensation (2-wire)
Sensor error detection
Programmable linearization, absorption infor- mation of condition and serial number
PC datalogging
u
u
u
u
u
u
u
u
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmGDisplay Systems / Control-Systems
Type SBS
HbmGHbmG
Paperless recorder and Data Logger
Easy operation by control button and through menu guidance
Interface to SCADA-Systems, to SPS- controls and to PC-systems
Integrated Webserver Measurement display via web browser Simultaneous recording of up to 3 batch
reports Data transfer via Compact-Flash-card
or USB-keychain Modbus-Master-function
u
u
u
u
u
u
u
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. (49) (0) 5973 / 9474-0 • Fax (49) (0) 5973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
Type SDA-2000The intelligent one
u
u
u
u
u
u
u
u
4-digit 14 segment LED indicator Input for mA, V, Pt100, TC and poti 2 relays and analogue output Universal supply voltage Front key programmable Safety class IP65 (IP67 optional) 5 Years guarantee Plain text error-message
20.120.120.1
nI terpreta
tio
n
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmGProcess-adaption
e. g. G1/2”-system
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
in te
mp
era
tue
me
as
ure
me
nt
in te
mp
era
tue
me
as
ure
me
nt
The hygenic modular process adaptation
multiplicity
Hygienic process-adaption dead volume- and elastomer-free aseptic measuring point EHEDG-conform modular concept for
process connection
u
u
u
u
u
The technology
Adaption for following threads: M12, G1/2”, G1”
Position for thread and/or M12-plug defined and marked (Welding sleeve system)
u
u
sealing-edgesealing-edge
open closed
sensor-headsensor-head
we
ldin
g s
lee
ve
we
ldin
g s
lee
ve
Welding reference
Weld into tanks/pipings1. Please drill a . Tolerance max.: +0,2 mm2. Attach the sleeve with 4 points (fig. 1)3. Screw in welding assistance plug4. Weld the sections between the points (fig. 2)
4 parts if M12 and G1/2”8 parts if G1”
u
hole with outside diameter of the sleeve
1
2
34
1
2
34
Fig. 1 Fig. 2
in fill-le
ve
l-me
as
ure
me
nt
in fill-le
ve
l-me
as
ure
me
nt
e. g. G1”-system
in p
res
su
re m
ea
su
rem
en
t in
pre
ss
ure
me
as
ure
me
nt
examples
milk-pipetri-clampvarivent
pro
ce
ss
co
nn
ec
tion
sp
roc
es
s c
on
ne
ctio
ns
of m
od
ula
r o
f mo
du
lar
sensor-headsensor-headwe
ldin
g s
lee
ve
we
ldin
g s
lee
ve
rP ocess-ad
ap
tion
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmG
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
06/2008
Hygienic adaption with welding-sleeve systen and modular process-connections
Welding sleeve system M12
Welding sleeve system G 1/2”
AP 15 BP 15 CP 15 UP 15
Welding sleeve system G 1”
BP 35
AP 05 CP 05 UP 05
containersthick walledcontainers
pipes with border crimping
Examples of order codes
not available
for small pipes / bent tubes and slanted installation
small containers small pipes withborder crimping
for pipes / bent tubesand slanted installation
containers/pipes
rP ozeßad
ap
tion process adaption
not available not available
Order Code BP15
BP15- -Control drilling
without control drilling - -
with control drilling K B
Certificationwithout material-certification - -
with 3.1B-certification 31 B
BP 15-L
for fill level limit switch smw extended version
AP 35
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmG
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
10/2006
modular process connection system
Milk-pipe screwing according to DIN 11851
Nominal sizes and types
DP EP FP GP LP MP
151515151515
------
DNDNDNDNDNDN
253240506580
DÜEÜFÜGÜLÜMÜ
151515151515
------
DNDNDNDNDNDN
253240506580
Varivent Triclamp
HPIP
1515
--DNDN
50 Typ N25 Typ F
G1/2”
G1”
Varivent Triclamp
Nominal sizes and types
FPGPLP
353535
---
DNDNDN
405065
FÜGÜLÜ
151515
---
DNDNDN
405065
HPIP
3535
--DNDN
50 Typ N25 Typ F
GA 35
DRD-flange
TP 15
TP 35
Cone-nut Union- nut
Cone nut Union-nut
GP 35: Combination cone nut also suitable for DRD-flange
Techn. Information:Complete process connectionconsists of GP 35 GA 35
rP ozeßad
ap
tion process adaption
Nominal sizes and types
Milk-pipe screwing according to DIN 11851
Nominal sizes and types
Examples of order codes HP15- -Control drilling
without control-drilling - -
with control-drilling K B
Certificatewithout material-certificate - -
with 3.1B certificate 31 B
Customer references HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmG
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
Tanja NimwegenSales management / authorized signatorysales representative western germany (Region Niederrhein/Ruhrgebiet/Sauerland)E-mail: [email protected]
Manfred Riesenbecksales representative northern germany (Region Osnabrück/Minden)E-mail: [email protected]
Otto KleinfelderSales representative southern germanyE-mail: [email protected]
Thomas Wewelsales representative northern germany (Region Münster/Lingen)E-mail: [email protected]
Manfred Vosssales representative northern germany(Region Coesfeld/Borken)E-mail: [email protected]
Achim Barmeyersales representative middle germanyE-mail: [email protected]
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmGWho works where ?
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. (49) (0) 5973 / 9474-0 • Fax (49) (0) 5973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
Frank Nimwegenmanaging director, acting partnersales representative northern germanyE-mail: [email protected]
Sales representatives
Eugen Nusssales representative middle/eastern germanyE-mail: [email protected]
Management
Frank NimwegenGeschäftsführer, GesellschafterE-mail: [email protected]
Ludger StröerGeschäftsführer, GesellschafterE-mail: [email protected]
Purchase order processing
Oliver HartkeE-mail: [email protected]
Repairs / Purchase order processing
Daniela FontanaE-mail: [email protected]
Marketing
Jörg HummelE-mail: [email protected]örg HummelE-mail: [email protected]
Accounting and billing
Olga WockenfußE-mail: [email protected]
Logistics / dispatch
Telat BozdereE-mail:[email protected]
Systems engineering
Friedhelm FeistLeitung SystemtechnikE-mail:[email protected]
Heiko GreiweE-mail:[email protected]
Frank SchlattmannE-mail:[email protected]
Ansgar GebingE-mail:[email protected] GebingE-mail:[email protected]
Karolin BrunsE-mail: [email protected]
Elke KöhlerE-mail: [email protected]
Kristina HeinzE-mail: [email protected]
Secretariat
E-mail: [email protected]
Julia Weßling
Technical consultation & distribution
E-mail: [email protected]
Frank Fries Frank ÖhmannE-mail:[email protected] ÖhmannE-mail:[email protected]
Purchase
Danny KolkmeierE-mail: [email protected]
Ties s.r.lVia Palmaria 2I-20161 MilanoTel. 0039-02-646496E-mail: [email protected]
Seli International
Italy
China
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmG
Contact
seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. (49) (0) 5973 / 9474-0 • Fax (49) (0) 5973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de
IntelmaticaKrasnogvardeyskiy Per. 15G197342 St. PetersburgRusslandTel. 007-812 320 42 37Fax 007-812 320 42 37e-mail: [email protected]
Russia
Kundert Ingenieure AGIfangstr. 6CH-8952 Schlieren Schweiz Tel. 0041-44-75542-42 Fax 0041-44-75542-43 www.kundert-ing.ch
Representation Switzerland
Distributor
Cematic-Electric B.V.Diamantstraat 26NL-7554 HengeloTel. 0031-74-2 43 34 22 Fax 0031-74-2 91 33 [email protected]
Netherlands
Poland
INT TECHNICS Sp. z o.o. ul. Przemystowa 39 A PL-33-100 Tarnów Tel. 0048-14-699-14-00 Fax 0048-14-692-69-29 [email protected]
Shang Hai SeLi Automation Equipment Co.,LtdRoom 406F,west Building,NO.3555,ChunSheng Road,Minhang District,ShanghaiTEL. 0086-(0)21-64608655 Fax 0086-(0)21-64608696website: www.cnseli.come-mail: :[email protected]
HbmG
R
A u t o m a t i s i e r u n g s t e c h n i k
HbmG
seli GmbH Automatisierungstechnik
Dieselstraße 1348485 NeuenkirchenTel. (49) (0) 59 73 / 94 74-0Fax (49) (0) 59 73 / 9474-74E-Mail [email protected] http://www.seli.de
central office