Embed Size (px)
Citation preview
Contato: Adriano CaminoE-mail: [email protected]. 21-24931098
Our Process
Ø 10,000 PSI
Ø 400 km/hr (ultrasonic streaming)
“We will save over $7 million dollars in our upcoming turnaround by replacing conven9onal exchanger cleaning services with Tech Sonic’s ultrasonic technologies.”
Interna(onal Oil Company
– Canadian Refinery
Economic Impact
“U9lizing Tech Sonic Services’ solu9ons will save us over 11 million gallons of water and waste water in our turnaround.”
International Oil Company
– Canadian Refinery
Environmental Impact
Our Safety ImpactTraditional
Our Safety ImpactTS Services
Our Results Flame Arrestor – 3 Hours
Our Results Valve – 2 Hours
Our Results Pump Components – 3 Hours
Managing the task
BEFORE
Our Results
AFTER 3 Hours
Our Results Gas/Oil Exchanger - 3 Hours
Our Results Gas/Oil Filters – 3 Hours
After 2 hours (partially suspended) in the Tech Sonic bath
Value is plugged solid on the intake
Before
1 Hour later
3 Hours later
3 Hours later
Spools – 3 Hours Clean Time
Sco<ord— Ft.Sask, Alberta
Sco<ord— Ft.Sask, Alberta
Tube & Shell Exchanger A1- BEFORE
After 4 hours in our ultrasonic solution
Tube & Shell Exchanger A1- After
Two identically fouled bundles. This one after 5 hours in the Tech Sonic bath
Twisted Tube Bundles
Shell Side Fouling
ADer 4 hours
AGemp(ng hydro-‐blas(ng for 5 hours with no impact
6 Hours Total Produc(on Time
CC-‐106B
Exchanger inspected before being submerged in our ultrasonic solution
AL CC-‐106 Exchangers
CC-‐106B
AL CC-‐106 Exchangers
CC 106-B Day 1
CC 106-B Day 1
CC 106-B Day 1
First session in the Tech Sonic bath.
CC 106-B Day 1
ADer 3 hours in the ultrasonic bath.
ADer 5 hours in the ultrasonic bath.
After 6 hours in the Tech Sonic bath
CC 106-B Day 1
CC 106-B Day 1
A<er 10 hours in the ultrasonic bath.
After 12 hours in our Tech Sonic solution
AL CC-‐106 Exchangers
before After
CC 106-B Result
before After
CC 106-B Result
before After
CC 106-B Result
before After
CC 106-B Result
Approved for service
AL CC-‐106 Exchangers
CC 106-B Day 1
Approved for service
Benicia-‐ Val-‐2563 BEFORE
Unsuccessful attempts were made to clean this modified-asphalt bundle using hydro-blasting for the period of 5 shifts.
Valero planned to dispose of this exchanger.
Benicia-‐ Val-‐2563 BEFORE
After 4 hours in the Tech Sonic bath
Before
Bryan demonstrates how the process has loosened the adherence of this modified, polymer asphalt on the tubes.
After 5 hours the contaminates can be peeled straight off the tubes
After 7 hours, much of the contamination has fallen off into the bath
After 10 hours
The bundle was sprayed down with a 5kpsi water rinse for 30 minutes to remove all remaining, but loosened debris.
Results
Our Economic Impact
“For every dollar we spend with Tech Sonic’s, we save four dollars in operational and cost efficiencies. We used to have to throw out most of the components as they could not be put back into production. Our capital costs have reduced dramatically.”
International Oil Company
– Canadian Oilsands Production Site
Our Commitment
Tech Sonic Services is a major contributor to operational efficiencies and revenue optimization.
Our singular goal is to return contaminated equipment and components, in “like-new” condition, back into operation faster and more cost effectively than any other solution.
