View
242
Download
10
Category
Preview:
Citation preview
CATÁLOGO TÉCNICO RESUMIDO E TABELA DE PREÇOSCOMPACT TECHNICAL CATALOG AND PRICE LIST 2012
find your "set point"
TGC
TGC 2012/0 1
TGC 2012/0Versão Janeiro 2012
January 2012 version
TABELA DE PREÇOS "TGC" [EUROS]CATÁLOGO TÉCNICO RESUMIDO E TABELA DE PREÇOS "TGC"
"TGC" PRICE LIST [EUROS]COMPACT TECHNICAL CATALOG AND "TGC" PRICE LIST
IMPORTANTE:O LANÇAMENTO DA TABELA DE PREÇOS “TGC 2012/0” OCORRE NUMA FASE DE ENORME INSTABILIDADE E INCERTEZA DOS MERCADOS NO QUERESPEITA AO “EURO” E AO CUSTO DAS MATÉRIAS PRIMAS E SUBSIDIÁRIAS QUE REGISTAM UM AUMENTO CONSTANTE, SUSTENTADO E SEMPRECEDENTES AO LONGO DE MUITOS MESES.
ASSIM OS PREÇOS CONSTANTES DA PRESENTE TABELA DE PREÇOS “TGC 2012/0” PODERÃO VIR A SER CORRIGIDOS EM FUNÇÃO DO IMPACTO NOPREÇO FINAL DOS NOSSOS PRODUTOS DE FUTURAS ALTERAÇOES SUBSTANCIAIS NOS CUSTOS DAS REFERIDAS MATÉRIAS PRIMAS E SUBSIDIÁRIAS.
IMPORTANT:LAUNCHING OF CENTAURO PRICE LIST “TGC 2012/0” OCCURS IN A PERIOD OF ENORMOUS INSTABILITY IN THE MARKETS IN WHAT CONCERNS TO THE“EURO” AND TO RAW MATERIALS COSTS WICH PRESENT UNEXPECTEDLY A CONSTANT AND SUBSTANCIAL PRICE INCREASE ALL ALONG THIS YEAR.
THEREFORE PRICES PRESENTED ON CENTAURO PRICE LIST “TGC 2012/0” MAY BE SUBMITTED TO CORRECTIONS AS A RESULT OF THE IMPACT ONFINAL PRICES OF ITS PRODUCTS OF EVENTUAL SUBSTANCIAL CHANGES ON PRICE LEVEL OF REFERRED RAW MATERIALS.
NOMENCLATURANOMENCLATURETGC - TABELA DE GRUPOS E COMPRESSORES CENTAURO
NOTAS- Todos os dados dos grupos são reportados a R404A;- Todos os preços apresentados nesta lista, não têm o valor do IVA incluido, e são considerados à porta de Fábrica (ex-works Castelo Branco);- Todos os fornecimentos, entregas e outros serviços prestados pela Centauro serão exclusivamente de acordo com as "CONDIÇÕES E TERMOS GERAIS DEFORNECIMENTO" constantes nesta tabela..NOTES- All Condensing Units's data is reported to R404A;- All prices presented on this list, do not include VAT, and are considered ex-works Castelo Branco;- All supllies, deliveries and other services offered by Centauro are solely according to the "GENERAL TERM AND CONDITIONS OF SUPPLY" presented in thiscatalog.
2 TGC 2012/0
find your "set point" encontre o seu "set point"
A "CENTAURO" reserva-se o direito de alterar, sem aviso prévio, as características técnicas ou dimensionais dos seus produtos."CENTAURO" reserves the right to make changes in specifications or design at any time without obligation to customers or users of previously sold equipment.
-
6
GRUPOS CONDENSING UNITS
51
FRASCOLD
31
35
-
52
COMPRESSORES E ACESSÓRIOS COMPRESSORS AND ACCESSORIES
BITZER 38 -
TGC 2012/0 3
-
BITZER
FRASCOLD
67
32
ÍND
ICE
IND
EX
36
FORNECIMENTO SUPPLY 74
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS 68
08
4A EMPRESA THE COMPANY
4 TGC 2012/0
CENTAURO em 1978 CENTAURO in 1978 CENTAURO em 2010 CENTAURO in 2010
A EMPRESA THE COMPANY
HISTORYCENTAURO's project started on 19th of June 1978 with the constitution and registration ofCastanheira, Henriques & C.ª Lda. Production started in 1980. In 1983 began productexportation to the United Kingdom.Always maintaing the strategic goals that supported it's foundation, CastanheiraHenriques specialized itself on manufacturing components for the Refrigeration andHVAC industry, progressively increasing the thrust of major portuguese companies ofreach-in cabinets, display cases, refrigeration project building (slaughterhouses,chambers, supermarkets, freezing tunnels, etc.), amongst other projects.In 1988 Castanheira Henriques celebrated in Castelo Branco it's 10 years of existencepresenting to over 700 national and international guests a renewed factory with 6500m2 ofcovered area and a complete, modern and certified range of products for theRefrigeration and HVAC industry.The need to expand and specialize itself, led to the foundation, in 1992, of CentauroPortugal S.G.P.S., S.A., that together with Castanheira Henriques (CommercialRefrigeration), created Centauro International (Industrial Refrigeration) and Brisa Nova(Comercialization of CENTAURO's products).The new Centauro Internacional facilities are inaugurated on the 4th of July 1992 with thepresence of over 1200 national and international guests.Centauro Portugal S.G.P.S., S.A. is a group of companies based in Castelo Branco,mainly oriented in designing, developing, manufacturing and selling heat exchangers,components and equipment for the Refrigeration and HVAC Industry.Industrial development and specialization was suported by the certification of an ISO9002 Quality Management System in 1993. At this date the ISO 9001-2008 QualityManagement System is certified by APCER and remains one of the main tools in the solidand progressive develpment of the Company.Inovation, quality and reliability of it's products and the efficient and demanding after-sales support, together with a strict financial management, well teamed and flexibleproduction, human and machinery wise and a watchful and in constant learningaplications Engineering department.For the Centauro group, exporting to new markets in central/northern Europe as alwaysbeen a development factor, either on finding new markets and aplications for it's products,either on R&D, resulting in the need to continue to develop and follow, in technical andtechnological terms, what is best done in these markets. Today it regularly exports toSpain, Holand, Belgium, United Kingdon, Ireland, Norway and Germany.In 2003 Centauro definitely enters the "restrict club" of Amonia equipment manufacturers,with the presentation of it's SAHE product range.Centauro's technical and technological development is supported by sucessfullpartnerships with suplliers and customers, and when needed, with national andinternational competence centers.This "team work" allows the company to be active in several aspects regarding inovativeand evolved technical sollutions in Refrigeration and HVAC industry.
HISTÓRICOO projecto Centauro nasceu a 19 de Junho de 1978 com a constituição e registo daEmpresa Castanheira, Henriques & C.ª L.da. A produção teve início em 1980. Em 1983 aEmpresa exportou os primeiros produtos para o Reino Unido.Apostando sempre na opção estratégica que deu suporte à sua fundação a CastanheiraHenriques especializou-se no fabrico de componentes para a industria de refrigeração ear condicionado, granjeando progressivamente a confiança dos grandes fabricantesnacionais de móveis frigoríficos e das empresas especializadas no projecto de construçãode instalações frigorificas (matadouros, câmaras frigorificas, hipermercados, túneis decongelação entre outros.Em 1988 a Castanheira Henriques comemorou em Castelo Branco os 10 anos deexistência apresentando aos mais de 700 convidados nacionais e estrangeiros umafábrica renovada com 6500m2 de área coberta e uma gama completa, moderna ecertificada de produtos para Refrigeração e AVAC.A necessidade de expansão e especialização a nível de produção levou à formação em1992 da Centauro Portugal S.G.P.S., S.A. que juntou à casa mãe Castanheira Henriques(frio comercial) a Centauro Internacional (frio industrial) e a Brisa Nova (comercializaçãode produtos Centauro). As novas instalações da Centauro Internacional são inauguradasem 4 de Julho de 1992 com a presença de mais de 1200 convidados nacionais eestrangeiros.A Centauro Portugal S.G.P.S., S.A. é um grupo de empresas sediado em Castelo Branco,vocacionado para a concepção, desenvolvimento, fabrico e comercialização depermutadores de calor e de equipamentos destinados à indústria de refrigeração,climatização e ar condicionado.O desenvolvimento industrial foi suportado pela certificação do Sistema de Garantia daQualidade ISO 9002 em 1993. Actualmente o Sistema de Gestão da Qualidade ISO 9001-2008 está certificada pela APCER e é uma das ferramentas ao serviço dodesenvolvimento sustentado das actividades da Empresa.A inovação, a qualidade e a fiabilidade dos seus produtos, o eficiente e exigente apoioapós venda são lado a lado com uma gestão financeira rigorosa, uma produção bemequipada, em termos técnicos e humanos, e flexível, um serviço de Engenharia deaplicações atento e com formação contínua.Para o grupo Centauro a exportação para os mercados do centro / norte da Europasempre funcionou como motor de desenvolvimento, seja no encontrar de novos mercadose novas aplicações dos seus produtos, seja na área de I&D.T que resulta da necessidadede acompanhar, em termos técnicos e tecnológicos, o que de melhor se faz nessesmercados. Hoje em dia exporta regularmente para Espanha, Holanda, Bélgica, ReinoUnido, Irlanda, Noruega e Alemanha.Em 2003 a Centauro entra definitivamente para o “grupo restrito” de fabricantes europeusde equipamento para instalações com amoníaco, com a apresentação da família deprodutos SAHE.O desenvolvimento técnico e tecnológico da Centauro é sustentado pelo desenvolvimentode parcerias vencedoras com fornecedores e clientes e, quando necessário, com centrosde competência nacionais e estrangeiros. Esta forma de “trabalhar em equipa” permite àEmpresa estar presente e activa em diversas frentes, com soluções técnicas das maisevoluídas e inovadoras a nível do sector de Refrigeração e AVAC.
TGC 2012/0 5
CENTAURO INTERNACIONAL CENTAURO INTERNACIONAL CENTAURO INTERNACIONAL CENTAURO INTERNACIONAL
MARCOS1978 - Fundação. 1980 - Fim da 1.ª fase - reconstrução da velha cerâmica. Início da produção. 1981 - Primeira presença num certame internacional “Interclima 81” – Paris.1982 - Inauguração oficial da Castanheira, Henriques & C.ª, Lda. 1983 - Inicio de exportação para o Reino Unido.1988 - Comemoração dos 10 anos de existência:
- Inauguração da ampliação final da Castanheira, Henriques & C.ª, Lda.- EXPO 88 que reúne 750 profissionais do ramo juntamente com os seus familiares.
1990 - É tomada a decisão de arriscar a construção de uma nova unidade fabril - Nasce o projecto Centauro Internacional. Modelo conforme para produtos CENTAURO.
1991 - Começa a construção da Centauro Internacional e nasce a ideia de construir a Centauro (Portugal) S.G.P.S., S.A.
1992 - A 10 de Abril é constituída a Centauro (Portugal) S.G.P.S., S.A.- A 4 de Julho é inaugurada a Centauro Internacional que reúne mais de 1.200 profissionais do ramo e seus familiares.
1993 - Marca produto certificado (<np>) para os produtos CENTAURO- ISO 9002 – Sistema de Garantia da Qualidade.
1995 - Marcação CE.1997 - Certificação Eurovent.1998 - ISO 9001/1995 – Sistema Garantia da Qualidade.2003 - ISO 9001/2000 – Sistema de Gestão da Qualidade.
- Apresentação na Climatização Madrid da Gama SAHE (Inox – NH3).- Exportação dos primeiros equipamentos para amoníaco.
2004 - Centauro 25 Anos – “Ventos de Mudança” – 25º Aniversário, em que reuniu mais de 1000 profissionais do ramo e seus familiares.
2006 - Inauguração da nova linha de pintura e ampliação das Instalações (30.000m2 área coberta).
2007 - Apresentação na Feira Climatización Madrid da nova linha de condensadores ACP e evaporadores com motores EC.
2008 - Certificação ISO 9001-2008.2009 - Enceramento das comemorações do 30º Aniversário da fundação da
CENTAURO na Climatizacion 2009 - Madrid.2010 - Comemoração dos 30 Anos do lançamento do primeiro catálogo de
produtos CENTAURO.- Sinerclima 2010 - Batalha.- Apresentação no mercado da nova gama Quiron by CENTAURO.
LANDMARKS1978 - Foundation.1980 - End of 1st. fase - reconstruction of the old ceramics. Start of production.1981 - First international participation: “Interclima 81” – Paris.1982 - Official Inauguration of Castanheira, Henriques & C.ª, Lda.1983 - Start of exportations to the United kingdom.1988 - Commemoration of 10 years existence:
- Inauguration of final expansion of Castanheira, Henriques & C.ª, Lda. branch.- EXPO 88 - 750 professionals and familiy members of the branch meet together.
1990 - Is taken the decision to risk the construction of a new manufactory unit.- Centauro Internacional project is born.- Agreement model for CENTAURO products.
1991 - Centauro Internacional construction has started born of the idea to build Centauro(Portugal) S.G.P.S., S.A.
1992 - On April 10th Centauro (Portugal) S.G.P.S., S.A. is constituted.- On July 4th Centauro Internacional inauguration congregates more than 1,200 professionals of the branch and its familiar ones.
1993 - Certified product label (<np>) for all CENTAURO products.- ISO 9002 - warranty of quality.
1995 - C.E. Label.1997 - Eurovent certification.1998 - ISO 9001/1995 – Quality system Warranty2003 - ISO 9001/2000 – Quality System Management
- Presentation of SAHE (Inox – NH3) range at "Climatización Madrid".- First exports of ammonium equipments 2004 - Centauro 25 Years – “Ventos de Mudança” – 25º Anniversary.
2006 - New painting line inauguration and facilities expansion (30.000m2 covered area).2007 - New ACP condensers and coolers with EC fans presented in "Climatización
Madrid" exhibition.2008 - ISO 9001-2008 certification.2009 - Comemorations closure of the 30th Aniversary of CENTAURO's foundation.
on "Climatización Madrid" exhibition.2010 - Comemorations of the 30th Aniversary of CENTAURO's first product catalog
launch.- Sinerclima 2010 - Batalha.
- Market presentation of the new range Quiron by CENTAURO.
6 TGC 2012/0
COMPRESSORES COMPRESSORSGRUPOS CONDENSING UNITS
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
PÁGINASPAGES
COMPRESSORES E ACESSÓRIOSCOMPRESSORS AND ACCESSORIES
08 - 31
TGC 2012/0 7
32
COMP
RESS
ORES
C
OMPR
ESSO
RSGR
UPOS
C
ONDE
NSIN
G UN
ITS
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
- 35 PÁGINASPAGES
Compressor com motor eléctrico, carga de óleo ester e pressão, 1 válvula de aspiração e 1 de descarga, 4 apoios anti-vibráticos,tampa preparada para OLC-K1 (4FC..4NCS), motor comsensores PTC e módulo de controlo SE-B1, caixa de ligaçõesclasse IP 65 e resistência de carter (2)(4).
Compressor with built-in motor, ester oil charge, protective charge, suction and discharge shut-off valve, 4 vibration dampers,bearing cover prepared for OLC-K1 (4FC..4NCS), motor PTCsensors with electronic control unit SE-B1, terminal box enclosureclass IP 65 and crankcase heater (2)(4).
(A) Preços aplicáveis somente quando encomendados juntamente com o compressor.(A) Prices aplicable only when ordered together with the compressor.
-
----
--
-
EXTENT OF DELIVERY - SINGLE COMPRESSOR
-
-
FORNECIMENTO BASE - COMPRESSOR SIMPLES
4TC-12.2Y
-
----
----
---
Válvu
la de
reten
ção
(8)
Chec
k valv
e (8)
-----
-
- --
--
----
-
-
---
--
-
--
------
---
------
---
-
-------
--
----
----
Comp
ress
or (1
)Co
mpre
ssor
(1)
Motor
para
volta
gem
espe
cial
Moto
r fo
r Spe
cial V
oltag
e
Contr
olado
r níve
l óleo
ele
ctrón
ico (O
LC-K
1)
(2)(9
)El
ectro
nic oi
l leve
l co
ntrol
(OLC
-K1)
(2
)(9)
EUR
Contr
olo de
Ca
pacid
ade (
2)(3
)Ca
pacit
y Reg
ulator
(2
)(3)
Arra
nque
em va
zio e
sens
or gá
s que
nte(se
m vá
lv. re
tençã
o) (2
)St
art u
nload
er w
/ dis
char
ge te
mp. s
enso
r(w
/o ch
eck v
alve)
(2)
---
----
Extra
s (A)
Extra
s (A)
--
-
--
---
--
Preç
oPr
ice
Pres
sosta
to dif
eren
cial d
e óleo
(M
P 54
) (2)
(9)
Oil p
ress
ure s
witch
(M
P 54
) (2)
(9)
Pres
s. dif
eren
cial ó
leo
electr
ónico
(Delt
a-P)
(2
)(10)
Elec
tronic
oil p
ress
ure
switc
h (De
lta-P
) (2
)(10)
--
COMPRESSORES COMPRESSORSGRUPOS CONDENSING UNITS
4VCS-6.2Y
4FC-5.2Y4EC-4.2Y4EC-6.2Y
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
4DC-7.2Y4CC-6.2Y
4TCS-8.2Y
4NCS-12.2Y4PCS-15.2Y
4PC-10.2Y
4NCS-20.2Y
4PCS-10.2Y
4TC-8.2Y
4VC-6.2Y
4DC-5.2Y
2EC-2.2Y2EC-3.2Y
2GC-2.2Y2FC-2.2Y2FC-3.2Y
Mode
loTy
pe
COMPRESSORES COMPRESSORSRecíprocos Semi-herméticos Octagon Semi-hermetic Reciprocating Octagon
4CC-9.2Y
2DC-3.2Y2CC-3.2Y2CC-4.2Y4FC-3.2Y
4NC-12.2Y4NC-20.2Y
-
--
4VC-10.2Y-
8 TGC 2012/0
4TCS-12.2Y
2DC-2.2Y
-
4VCS-10.2Y
EUR2KC-05.2Y2JC-07.2Y2HC-1.2Y2HC-2.2Y
---------
4PC-15.2Y
--
(1) 2KC-05.2..4CC-9.2: (230V /380..420VY/3/50Hz, 440..480VY/3/60Hz) (6) Incluido no arranque em vazio e sistema "CIC" (quando aplicável)4VCS-6.2..4NC-20.2: (380..420VYY/3/50Hz, 440..480VYY/3/60Hz) (7) Módulo de controle electrónico e sensor de temperatura (montado),
(2) Tensão nominal standard 230V/1/50&60Hz válvula de expansão (não montada), ventilação adicional ou instalação no(3) 4FC-3.2..4NCS-20.2: 1x Controlo de capacidade (= 50%) fluxo de ar do condensador (4) 2KC-05.2..2FC-3.2: 0..60 W (resistência PTC com controlo temperatura) (8) Dimensões standard, poderá ser feita uma correcção dependendo das
2EC-2.2..4CC-9.2: 0..120 W (resistência PTC com controlo temperatura) condições de funcionamento4VC(S)-6.2..4NC(S)-20.2: 0..140 W (resistência PTC com controlo temperatura) (9) Não montado
(5) Tensão nominal standard 230V/1/50&60Hz
(1) 2KC-05.2..4CC-9.2: (230V /380..420VY/3/50Hz, 440..480VY/3/60Hz) (6) Included in start unloader and "CIC" system (when aplicable)4VCS-6.2..4NC-20.2: (380..420VYY/3/50Hz, 440..480VYY/3/60Hz) (7) Electronic control module & temperature sensor, mounted –
(2) Standard voltage 230V/1/50&60Hz impulse valve for refrigerant injection, not mounted –(3) 4FC-3.2..4CC-9.2: 1x capacity regulator (= 50%) additional fan or installation in condenser airflow required(4) 2KC-05.2..2FC-3.2: 0..60 W (PTC heater with temp. control) (8) Standard dimensions; a correction may be necessary,
2EC-2.2..4CC-9.2: 0..120 W (PTC heater with temp. control) depending on operating conditions4VC(S)-6.2..4NC(S)-20.2: 0..140 W (PTC heater with temp. control) (9) Not mounted
(5) Standard voltage 230V/1/50&60Hz
Sens
or de
gás q
uente
(6
)Di
scha
rge
tempe
ratur
e sen
sor
(6)
Bobin
a volt
agem
es
pecia
l par
a SU
/ CR
Spec
ial V
oltag
e Coil
for S
U / C
R
Siste
ma "C
IC" (
2)(7
)"C
IC" S
ystem
(2)(7
)
Válvu
la de
servi
ço de
óle
oOi
l ser
vice v
alve
-----
-
------
------
--
-
-
EUR
Extra
s (A)
Extra
s (A)
----
----
---- -
Venti
lação
adici
onal
(5)
Adici
onal
Fan (
5)
Linha
desc
arga
Disc
harg
e line
-----
-
-
-
--
---
--
--
-
-
--
---
---
--
--
---
-
------
------
-
----
-
--------
-
-
------
--
COMP
RESS
ORES
C
OMPR
ESSO
RSGR
UPOS
C
ONDE
NSIN
G UN
ITS
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
9TGC 2012/0
-
-
-
-
-
-
4TC-12.2Y4PC-10.2Y4PC-15.2Y4NC-12.2Y4NC-20.2Y
4PCS-15.2Y4NCS-12.2Y4NCS-20.2Y4VC-6.2Y
4EC-4.2Y4EC-6.2Y4DC-5.2Y4DC-7.2Y
4TC-8.2Y
4TCS-8.2Y4TCS-12.2Y
2EC-2.2Y2EC-3.2Y2DC-2.2Y2DC-3.2Y2CC-3.2Y
4CC-6.2Y
4VC-10.2Y
4PCS-10.2Y
2KC-05.2Y2JC-07.2Y
4CC-9.2Y4VCS-6.2Y4VCS-10.2Y
70
4FC-5.2Y868486
4445
86
91129139
22.7022.7026.8026.80
Mode
loTy
pe
2HC-1.2Y2HC-2.2Y2GC-2.2Y
-
4FC-3.2Y2CC-4.2Y
2FC-2.2Y2FC-3.2Y
7082
716871
45454768
Peso
Weig
ht
Kg4343
134141
8991
139
132141137144142
147141150
150144153
Volum
e des
locad
o (50
Hz)
Disp
lacem
ent (
50Hz
)
m3/h4.065.216.516.517.589.549.5411.4011.4013.4013.4016.2016.2018.1018.10
32.5032.5034.7034.7041.3041.3048.5048.5056.2556.2534.73
56.25
34.7341.3341.3348.5048.5056.25
Compressor com 2 motores eléctricos, carga de óleo ester e pressão, Compressor com motor eléctrico e variador de frequência para 1 válvula de aspiração e 2 de descarga, 8 apoios anti-vibráticos, controlo de capacidade progressivo, carga de óleo e pressão,tampa preparada para OLC-K1 (44FC..44NCS), motor com 1 válvula de aspiração de 1 de descarga, 4 apoios anti-vibráticos,sensores PTC e módulo de controlo SE-B1, caixa de ligações tampa preparada para OLC-K1 (4FC..4NCS), motor comclasse IP 65, resistência de carter (2)(4). sensores PTC e módulo de controlo SE-B1, caixa de ligações
classe IP 65, resistência de carter (2)(4).
Compressor with 2 built-in motors, ester oil & protective charge, Compressor with built-in motor and integral frequency inverter 1x suction & 2x discharge shut-off valves, 8 vibration dampers, for stepless capacity control, oil charge, protective charge, bearing cover prepared for OLC-K1 (44FC..44NCS), motor PTC suction and discharge shut-off valve, 4 vibration dampers,sensors with electronic control unit SE-B1, terminal box enclosure bearing cover prepared for OLC-K1 (4FC..4NCS), motor PTCclass IP 65 and crankcase heater (2)(4). sensors with electronic control unit SE-B1, terminal box enclosure
class IP 65 and crankcase heater (2)(4).
(A) Preços aplicáveis somente quando encomendados juntamente com o compressor.(A) Prices aplicable only when ordered together with the compressor.
Válvu
la de
reten
ção
(7)(8
)Ch
eck v
alve (
7)(8
)
-
---
-----
------
Extra
s (A)
Extra
s (A)
-----
-- - -
- -- - - -
-- -
4NCS-20.F4Y -
- --- - -
- - -4NES-12.F3Y -4PCS-15.F4Y4PES-10.F3Y -4TCS-12.F4Y -
- - --- - -
-4TES-8.F3Y -4VCS-10.F4Y -
--- - -
- - -4VES-6.F3Y -4CC-9.F3Y -
- -
4EC-6.F1Y -4DC-7.F1Y -
- --- - -4CC-6.F1Y -
4DC-7.F3Y -
- --- - -- - -
10 TGC 2012/0
2DC-3.F1Y - - -
-- -
--
- -4FC-5.F1Y -
-44VCS-20.2Y
44PCS-20.2Y - -
44TCS-16.2Y --
--
-
-44VCS-12.2Y - -44CC-18.2Y -
--44CC-12.2Y - -44DC-14.2Y44DC-10.2Y - -44EC-12.2Y -44EC-8.2Y - -
-
-44FC-6.2Y -
-
-44FC-10.2Y -
- -22CC-8.2Y - -
22DC-6.2Y --22CC-6.2Y
-
- - -- -- -
- ----
22EC-4.2Y - - -Compressores Tandem OCTAGON OCTAGON Tandem Compressors
-
DEPÓSITOS LÍQUIDO LIQUID RECEIVERSGRUPOS CONDENSING UNITS
22EC-6.2Y22DC-4.2Y
EUR
-
Compressores com variador de frequência VARISPEED VARISPEED integral frequency inverter Compressors
--
- - -
COMPRESSORES COMPRESSORSRecíprocos Semi-herméticos Octagon Semi-hermetic Reciprocating Octagon
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
ice
Motor
para
volta
gem
espe
cial
Moto
r fo
r Spe
cial V
oltag
e
EUR
Comp
ress
or (1
)Co
mpre
ssor
(1)
Contr
olado
r níve
l óleo
ele
ctrón
ico (O
LC-K
1)
(2)(1
1)El
ectro
nic oi
l leve
l co
ntrol
(OLC
-K1)
(2
)(11)
Pres
sosta
to dif
eren
cial d
e óleo
(M
P 54
) (11
)Oi
l pre
ssur
e swi
tch
(MP
54) (
11)
Arra
nque
em va
zio e
sens
or gá
s que
nte(se
m vá
lv. re
tençã
o) (2
)St
art u
nload
er w
/ dis
char
ge te
mp. s
enso
r(w
/o ch
eck v
alve)
(2)
Pres
s. Di
feren
cial ó
leo
electr
ónico
(Delt
a-P)
(2
)(11)
Elec
tronic
oil p
ress
ure
switc
h (De
lta-P
) (2
)(11)
Contr
olo de
Ca
pacid
ade (
2)(3
)(10)
Capa
city R
egula
tor
(2)(3
)(10)
EXTENT OF DELIVERY - TANDEM COMPRESSOR
FORNECIMENTO BASE - COMPRESSOR VARISPEED
EXTENT OF DELIVERY - VARISPEED COMPRESSOR
----
FORNECIMENTO BASE - COMPRESSOR TANDEM
44NCS-40.2Y44NCS-24.2Y -
44TCS-24.2Y
44PCS-30.2Y
(1) 22EC-4.2..44CC-18.2: (230V /380..420VY/3/50Hz, 440..480VY/3/60Hz) (7) 2x com compressores Tandem44VCS-12.2..44NCS-40.2: (380..420VYY/3/50Hz, 440..480VYY/3/60Hz) (8) Dimensões standard, poderá ser feita uma correcção dependendo das2DC-3.F1Y..4NCS-20.F4Y: (380..480V/3/50Hz, 380..480V/3/60Hz) condições de funcionamento
(2) Tensão nominal standard 230V/1/50&60Hz (9) Módulo de controle electrónico e sensor de temperatura (montado), (3) 44FC-6.2..44NCS-40.2: 2x Controlo Capacidade (= 75/50/25%) válvula de expansão (não montada), ventilação adicional ou instalação no(4) 22EC-4.2..44CC-18.2: 2x 0..120 W (resistência PTC com controlo temperatura) fluxo de ar do condensador
44VCS-12.2..44NCS-40.2: 2x 0..140 W (resistência PTC com controlo temperatura) (10) Em compressores Tandem o número de controlos de capacidade deverá ser(5) Tensão nominal standard 230V/1/50&60Hz idêntico em ambos os compressores.(6) Incluido no arranque em vazio e sistema "CIC" (quando aplicável) (11) Não montado
(1) 22EC-4.2..44CC-18.2: (230V /380..420VY/3/50Hz, 440..480VY/3/60Hz) (7) 2x with Tandem compressors44VCS-12.2..44NCS-40.2: (380..420VYY/3/50Hz, 440..480VYY/3/60Hz) (8) Standard dimensions; a correction may be necessary, 2DC-3.F1Y..4NCS-20.F4Y: (380..480V/3/50Hz, 380..480V/3/60Hz) depending on operating conditions
(2) Standard voltage 230V/1/50&60Hz (9) Electronic control module & temperature sensor, mounted –(3) 44FC-6.2..44CC-18.2: 2x capacity regulator (= 75/50/25%) impulse valve for refrigerant injection, not mounted –(4) 22EC-4.2..44CC-18.2: 2x 0..120 W (PTC heater with temp. control) additional fan or installation in condenser airflow required
44VCS-12.2..44NCS-40.2: 2x 0..140 W (PTC heater with temp. control) (10) With Tandem models identical number of capacity regulators(5) Standard voltage 230V/1/50&60Hz must be mounted on both compressors(6) Included in start unloader and "CIC" system (when aplicable) (11) Not mounted
-165174
4PCS-15.F4Y
Extra
s (A)
Extra
s (A)
- -
--
--
- -
- -
-
-- -- -
- - -- -
---
--
--
Sob p
edido
Unde
r req
uest 4TES-8.F3Y
-
-
- 4NCS-20.F4Y
153163
--
4PES-10.F3Y
-
4DC-7.F3Y32.4826.82
106- -4CC-9.F3Y32.48
- --
4EC-6.F1Y26.84
- -
--
11
- -
158165
4DC-7.F1Y
- 4CC-6.F1Y- 106
106
163171
4NES-12.F3Y-
88
4VCS-10.F4Y- 4VES-6.F3Y
4TCS-12.F4Y
- -22.72
105105106
--
268
282296
302
TGC 2012/0
- ---
- -
Compressores com variador de frequência VARISPEED VARISPEED integral frequency inverter Compressors13.4218.05
- 2DC-3.F1Y4FC-5.F1Y
69.50
296
82.7097.00
112.5044NCS-24.2Y
97.00 44PCS-30.2Y292
44TCS-16.2Y82.70
Sob p
edido
Unde
r req
uest
44TCS-24.2Y
Sob p
edido
Unde
r req
uest
44NCS-40.2Y
44VCS-12.2Y44VCS-20.2Y
308
288
112.50
44PCS-20.2Y
69.50-
44CC-12.2Y
44DC-10.2Y53.70
18453.7065.00
- - 44DC-14.2Y-
44EC-8.2Y- -
-
44CC-18.2Y-
-44EC-12.2Y
180
184
22CC-8.2Y32.50-- - -
22DC-6.2Y- 22DC-4.2Y
-22CC-6.2Y-
- - - -
-- -
--- - --
-
-
COMP
RESS
ORES
C
OMPR
ESSO
RS
22EC-4.2Y
44FC-10.2Y
EUR
149
Compressores Tandem OCTAGON OCTAGON Tandem Compressors
-143
Bobin
a volt
agem
es
pecia
l par
a SU
/ CR
Spec
ial V
oltag
e Coil
for S
U / C
R
Venti
lação
adici
onal
(5)(7
)Ad
icion
al Fa
n (5)
(7)
Kg
- -
Sens
or de
gás q
uente
(6
)(7)
Disc
harg
e tem
pera
ture s
enso
r (6
)(7)
-
Siste
ma "C
IC" (
9)"C
IC" S
ystem
(9)
Válvu
la de
servi
ço de
óle
oOi
l ser
vice v
alve
-
-
m3/h
22.70
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
- 22EC-6.2Y
148148
32.50
44FC-6.2Y36.1036.10
172180
149143
GRUP
OS
CON
DENS
ING
UNIT
S
-
180179
Mode
loTy
peLinha
desc
arga
Disc
harg
e line
176
Volum
e des
locad
o (50
Hz)
Disp
lacem
ent (
50Hz
)
Peso
Weig
ht
-
- 26.80
-
22.7026.80
45.40
65.00
45.40
---
-
FORNECIMENTO BASE - COMPRESSOR SIMPLES FORNECIMENTO BASE - COMPRESSOR TANDEMCompressor com motor eléctrico part-winding (motor Y/ sob pedido), carga de óleo Compressor com 2 motores eléctricos part-winding (motor Y/ sob pedido), carga deester e pressão, 1 válvula de aspiração e 1 de descarga, 4 apoios anti-vibráticos, óleo ester e pressão, 1 válvula de aspiração e 2 de descarga, 8 apoios anti-vibráticos,motor com sensores PTC e módulo de controlo SE-B2, caixa de ligações classe motor com sensores PTC e módulo de controlo SE-B2, caixa de ligações classeIP65, válvula de segurança interna (excepto S4T-5.2..S4G-12.2), resist. Carter (2)(4). IP54, 2 válvulas de segurança internas (excepto S4T-5.2..S4G-12.2), resist. Carter (2)(4).FORNECIMENTO BASE - COMPRESSOR SIMPLES DUPLO ESTÁGIO FORNECIMENTO BASE - COMPRESSOR TANDEM DUPLO ESTÁGIOAlém do mencionado acima, linha de pressão inter-estágios, válvula de expansão (5), Além do mencionado acima, linhas de pressão inter-estágios, válvulas de expansão (5),visor, filtro, válv. solenoide, alternativa CIC ®-System: módulo controle electrónico, visores, filtros, válv. solenoide, alternativa 2x CIC ®-System: módulo controle electrónico,sensores temperatura (montados), válvula para injecção de refrigerante. sensores temperatura (montados), válvula para injecção de refrigerante.EXTENT OF DELIVERY - SINGLE COMPRESSOR EXTENT OF DELIVERY - TANDEM COMPRESSORCompressor with built-in part-winding motor, (Y/D motor on request), ester oil charge, protective Compressor with 2 built-in part-winding motors, (Y/D motor on request), ester oil charge,charge, suction & discharge shut-off valve, 4 vibration dampers, motor PTC sensors with protective charge, 1x suction & 2x discharge shut-off valves, base frame with 8 vibrationelectronic control unit SE-B2, terminal box enclosure class IP 54, built-in pressure relief valve dampers, motor PTC sensors with electronic control unit SE-B2, terminal box (except S4T-5.2..S4G-12.2), crankcase heater (2)(4). enclosure class IP 54, 2 built-in pressure relief valves, crankcase heater (2)(4).EXTENT OF DELIVERY - 2-STAGE SINGLE COMPRESSOR EXTENT OF DELIVERY - 2-STAGE TANDEM COMPRESSORThe mentioned above plus, interstage pressure line, de-superheating expansion valve (5), The mentioned above plus, interstage pressure lines, de-superheating expansion valves (5),sight glass, drier, solenoid valve, alternatively CIC®-System: electronic control module, sight glasses, driers, solenoid valves, alternatively 2x CIC®-System: electronic control module, temperature sensors (mounted), pulse valve for refrigerant injection. temperature sensors (mounted), pulse valve for refrigerant injection.
(A) Preços aplicáveis somente quando encomendados juntamente com o compressor.(A) Prices aplicable only when ordered together with the compressor.
S6H-20.2YS6G-25.2Y
-
-
--
--S66G-50.2Y
S66H-40.2Y-
--
-
---
-
--
--
--
--
Válvu
la de
reten
ção
(10)
Chec
k valv
e (10
)
Pres
s. dif
eren
cial ó
leo
electr
ónico
(Delt
a-P)
(2
)(12)
(14)
Elec
tronic
oil p
ress
ure
switc
h (De
lta-P
) (2
)(12)
(14)
--
-----
Compressores Duplo estágio 2-Stage Compressors
--
-
- --
Bobin
a volt
agem
es
pecia
l par
a CR
Spec
ial V
oltag
e Coil
for C
R
--
Compressores Tandem Tandem Compressors44J-26.2Y
44H-30.2Y
- --
12 TGC 2012/0
66G-80.2Y
-
-
66J-66.2Y66H-50.2Y66H-70.2Y
DEPÓSITOS LÍQUIDO LIQUID RECEIVERSS6J-16.2Y
44H-50.2Y
S4G-12.2YS4N-8.2Y
66G-60.2Y
66F-100.2Y66F-80.2Y
44G-40.2Y
S66J-32.2YS6F-30.2Y So
b ped
idoUn
der r
eque
st
8FC-60.2Y
44J-44.2Y
S4T-5.2Y
8FC-70.2Y
44G-60.2Y
6G-30.2Y
6F-50.2Y
8GC-60.2Y
66J-44.2Y
4G-30.2Y6J-22.2Y6J-33.2Y
6H-35.2Y
8GC-50.2Y
6H-25.2Y
6F-40.2Y6G-40.2Y
4H-15.2Y
4G-20.2Y4H-25.2Y
Sob p
edido
Unde
r req
uest
COMPRESSORES COMPRESSORSRecíprocos Semi-herméticos Semi-hermetic Reciprocating
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
iceCo
mpre
ssor
(1)
Comp
ress
or (1
)
GRUPOS CONDENSING UNITS
EUR4J-13.2Y
-
-
-
-
4J-22.2Y
-
-
-----
-
-
-
-
-
-
----
--
--
-
-
--
Extra
s (A)
Extra
s (A)
EUR
Siste
ma "C
IC" (
2)(6
)"C
IC" S
ystem
(2)(6
)
1x B
obina
volta
gem
espe
cial p
ara S
U 1x
Spe
cial V
oltag
e Co
il1x
Con
trolo
de
Capa
cidad
e (2)
(3)(1
2)1x
Cap
acity
Reg
ulator
(2
)(3)(1
2)
Sens
or gá
s que
nte (7
)Di
scha
rge t
emp.
sens
or (7
)
Motor
para
volta
gem
espe
cial
Moto
r fo
r Spe
cial V
oltag
ePr
esso
stato
difer
encia
l de
óleo
(2)(1
2)(1
4)Oi
l pre
ssur
e swi
tch
(2)(1
2)(1
4)
Arra
nque
em va
zio e
sens
or gá
s que
nte(se
m vá
lv. re
tençã
o) (2
)St
art u
nload
er w
/ dis
char
ge te
mp. s
enso
r(w
/o ch
eck v
alve)
(2)
S66F-60.2Y
------------
-----
---
Prote
cção
de m
otor
INT
389
INT
389 M
otor
prote
ction
devic
e
------
-
-----
---
(1) 4J-13.2..6F-40.2: 380..420VYY/3/50Hz, 440..480VYY/3/60Hz (4) 4J-13.2..8FC-70.2: 140 W, 44J-26.2..66F-100.2: 2x 140 W (10) Dimensões standard, poderá ser feitaS4T-5.2..S66F-60.2: 380..420VYY/3/50Hz, 440..480VYY/3/60Hz S4T-5.2..S4N-8.2: 100 W, S4G-12.2..S6F-30.2: 140 W uma correcção dependendo das8GC-50.2..8FC-70.2: 380..420V /3/50Hz, 440..480V /3/60Hz (5) Tensão nominal standard 230VD/400Y/3/50Hz, 440..480V/3/60Hz condições de funcionamento44J-26.2..66F-80.2: 380..420VYY/3/50Hz, 440..480VYY/3/60Hz (6) Módulo de controle electrónico e sensor de temperatura (11) Standard para 4J-13.2..6F-50.2 e6F-50.2 & 66F-100.2: 380..400VYY/3/50Hz, 440..460VYY/3/60Hz (montado), válvula de expansão (não montada), ventilação 44J-26.2..66F-100.2
(2) Tensão nominal standard 230V/1/50&60Hz adicional ou instalação no fluxo de ar do condensador (12) Em compressores Tandem o nº de(3) 4J-13.2..4F-25.2Y: 1x controlo capacidade (= 50%) (7) Incluído no Sistema-CIC e no Arranque em vazio controlos de capacidade deverá ser
6J-22.2..6F-50.2: 2x controlos capacidade (= 66/33%) (8) Oil: 1x tomada de parafuso para tubo de 5/8" idêntico em ambos os compressores.8GC-50.2..8FC-70.2: 2x controlos capacidade (= 75/50%) Ref.: 1x tomada de parafuso para tubo de 7/8" (13) Fornecimento da vál. expansão44J-26.2..44G-60.2: 2x controlos capacidade (= 75/50/25%) (9) Todas as cabeças de cilindros depende da temp. evap. pretendida66J-44.2..66F-100.2: 4x controlos capacidade (= 83/66/50/33/16%) (14) Não montado
(1) 4J-13.2..6F-40.2: 380..420VYY/3/50Hz, 440..480VYY/3/60Hz 66J-44.2..66F-100.2: 4x capacity regulator (= 83/66/50/33/16%) (10) Standard dimensions; a correctionS4T-5.2..S66F-60.2: 380..420VYY/3/50Hz, 440..480VYY/3/60H (4) 4J-13.2..8FC-70.2: 140 W, 44J-26.2..66F-100.2: 2x 140 W may be necessary8GC-50.2..8FC-70.2: 380..420V /3/50Hz, 440..480V /3/60Hz S4T-5.2..S4N-8.2: 100 W, S4G-12.2..S6F-30.2: 140 W (11) Standard for 4J-13.2..6F-50.2 and44J-26.2..66F-80.2: 380..420VYY/3/50Hz, 440..480VYY/3/60Hz (5) Standard voltage 230V /400Y/3/50Hz, 440..480V/3/60Hz 44J-26.2..66F-100.26F-50.2 & 66F-100.2: 380..400VYY/3/50Hz, 440..460VYY/3/60H (6) Electronic control module & temperature sensor, mounted – (12) With Tandem models identical
(2) Standard voltage 230V/1/50&60Hz Impulse valve for refrigerant injection, not mounted – number of capacity regulators must(3) 4J-13.2..4F-25.2Y: 1x capacity regulator (= 50%) additional fan or installation in condenser airflow required be mounted on both compressors
6J-22.2..6F-50.2: 2x capacity regulator (= 66/33%) (7) Included in CIC-System & start unloader (13) Supplied expansion valve depends on8GC-50.2..8FC-70.2: 2x capacity regulator (= 75/50%) (8) Oil: 1x screw socket for tube 5/8" / Gas: 1x screw socket for tube 7/8" desired evaporating temperature44J-26.2..44G-60.2: 2x capacity regulator (= 75/50/25%) (9) All cylinder heads (14) Not mounted
--
-
-- -
---
---
-
- -
--
-
----
169.00
-
-
220
--
-- -
---
-
---
233234411
84.50101.10
-
--
--
------
-
-----
-
--
-
-
-----
Compressores Tandem Tandem Compressors- - -
66J-66.2Y
-
-
-
-
-
-
Linha
desc
arga
com
Muffle
r Di
scha
rge l
ine w
ith
Muffle
r
-----
Linha
desc
arga
com
Muffle
r e 2
válvu
las
reten
ção
Disc
harg
e line
with
Mu
ffler a
nd 2
chec
k va
lves
---
Venti
lação
adici
onal
(5)
Adici
onal
Fan (
5)
Cabe
ças a
rrefec
idas a
ág
ua (9
)W
ater-c
ooled
cylin
der h
eads
(9)
Caixa
ligaç
ões c
om
prote
cção
IP66
IP 66
Ter
mina
l Box
--
-
S6J-16.2Y
-
--
-
169.00
8FC-70.2Y
8GC-60.2Y
--
--
-
253.60303.20
13TGC 2012/0
S66H-40.2YS66G-50.2Y
66F-100.2Y
S66F-60.2Y
S4G-12.2Y
S6F-30.2Y
493
190.60190.60
44J-44.2Y
169.00
S66J-32.2Y
S6G-25.2Y
S4T-5.2Y
66F-80.2Y66G-80.2Y
483
S6H-20.2Y
-
S4N-8.2Y
66H-50.2Y66H-70.2Y
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS44J-26.2Y
44H-50.2Y44H-30.2Y
66J-44.2Y
44G-40.2Y44G-60.2Y
Compressores Duplo estágio 2-Stage Compressors
66G-60.2Y---
---
-
--
6G-40.2Y
--
6H-25.2Y
-
6H-35.2Y6G-30.2Y
-
213231224
110.50
GRUP
OS
CON
DENS
ING
UNIT
S
4G-20.2Y
4J-13.2Y
4G-30.2Y6J-22.2Y
COMP
RESS
ORES
C
OMPR
ESSO
RS
4H-15.2Y4H-25.2Y
Mode
loTy
pe
4J-22.2Y
6J-33.2Y
6F-40.2Y6F-50.2Y8GC-50.2Y
8FC-60.2Y---
-
-
-
--
--
--
-
-
--
--
--
-
----
-
-
----
-
--
--
---
---
--
--
-
-
-
--
-
--
--
-
------
-
Sub-
arre
feced
or in
ter-
estág
ios (n
ão
monta
do)
(2)(1
3)Liq
uid su
bcoo
ler (n
ot mo
unted
)(2)(1
3)
----
------
-----
---
Extra
s (A)
Extra
s (A)
EUR
Volum
e des
locad
o (50
Hz)
Disp
lacem
ent (
50Hz
)
Peso
Weig
ht
m3/h Kg
Prote
cção
das c
abeç
as
para
água
do m
ar (9
)Se
awate
r res
istan
t coa
ted
cylin
der h
eads
(9)
Sub-
arre
feced
or in
ter-
estág
ios (m
ontad
o)
(2)(1
3)Liq
uid su
bcoo
ler
(mou
nted)
(2)(1
3)
179-
Válvu
la de
servi
ço de
óle
oOi
l ser
vice v
alve
63.50
Aces
s. eq
ualiz
ação
cá
rter (
8) O
il & ga
s equ
alizin
g Fit
tings
(8)
180209
519521303.20
19.70
491518
136141
127.00147.20147.20
221.00221.00253.60
63.5073.7073.7084.6084.6095.3095.30
110.50
127.00
-
126.80126.80151.60151.60185.00185.00221.00
190183203192206
235228238239
202.20
28.0042.3063.5073.60
241342350361374
433459
404426412446436484461497
461
127.00
221.00
147.20
Compressor com motor eléctrico part-winding (motor Y/ sob pedido), carga de óleo estere pressão, 1 válvula de aspiração e 1 de descarga, 4 apoios anti-vibráticos, motor comsensores PTC e módulo de controlo, caixa de ligações classe IP54 ou IP65, resist. carter (2)(4).Módulo de controlo: 4VES-6Y..4NES-20Y: SE-B1 4JE-13Y..6FE-50Y: SE-B2 Classe da caixa ligações 4VES-6Y..4NES-20Y: IP65 4JE-13Y..6FE-50Y: IP54
44VES-12T..44NES-40Y: SE-B1 44JE-26Y..66FE-100Y: SE-B2 44VES-12T..44NES-40Y: IP65 44JE-26Y..66FE-100Y: IP54
Compressor with built-in part-winding motor, (Y/ motor on request), ester oil charge, protective charge, suction & discharge shut-off valve, 4 vibration dampers, motor PTC sensors with electronic control unit, terminal box enclosure class IP54 or IP65, crankcase heater (2)(4).Electronic control unit: 4VES-6Y..4NES-20Y: SE-B1 4JE-13Y..6FE-50Y: SE-B2 Terminal box 4VES-6Y..4NES-20Y: IP65 4JE-13Y..6FE-50Y: IP54
44VES-12T..44NES-40Y: SE-B1 44JE-26Y..66FE-100Y: SE-B2 enclosure class: 44VES-12T..44NES-40Y: IP65 44JE-26Y..66FE-100Y: IP54
(A) Preços aplicáveis somente quando encomendados juntamente com o compressor.(A) Prices aplicable only when ordered together with the compressor.
FORNECIMENTO BASE - COMPRESSOR SIMPLES
EXTENT OF DELIVERY - SINGLE COMPRESSOR
-
----
-
--
-
----
-
--
------
--
----
--
-----
-
--
-
66FE-100Y66FE-80Y
66GE-60Y
66HE-50Y
14 TGC 2012/0
6HE-25Y
66HE-70Y
44JE-26Y
66GE-80Y
66JE-66Y66JE-44Y44FE-70Y44FE-50Y44GE-60Y44GE-40Y44HE-50Y44HE-30Y44JE-44Y
-
44TES-16Y
44NES-40Y-
44PES-20Y
44NES-24Y
6JE-22Y6JE-33Y
44VES-20Y
44PES-30Y
--
-
-
44TES-24Y
44VES-12Y
6FE-50Y
-
6FE-40Y
4HE-15Y
4FE-25Y4GE-30Y4GE-20Y
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
6HE-35Y
6GE-40Y6GE-30Y
Compressores Tandem Tandem Compressors
4FE-35Y
4HE-25Y----
Pres
s. dif
eren
cial ó
leo
electr
ónico
(Delt
a-P)
(2
)(11)
Elec
tronic
oil p
ress
ure
switc
h (De
lta-P
) (2
)(11)
Contr
olado
r níve
l óleo
ele
ctrón
ico (O
LC-K
1)
(2)
Elec
tronic
oil le
vel
contr
ol (O
LC-K
1) (2
)
--
-
-
COMPRESSORES COMPRESSORSRecíprocos Semi-herméticos ECOLINE Semi-hermetic Reciprocating ECOLINE
Arra
nque
em va
zio(se
m vá
lv. re
tençã
o)
(2)
Star
t unlo
ader
(w/o
chec
k valv
e) (2
)
Válvu
la de
re
tençã
o (7)
Chec
k valv
e (7)
4VES-10Y4VES-6Y
4TES-8Y
-
Bobin
a volt
agem
es
pecia
l par
a SU
Spec
ial V
oltag
e Coil
for S
U
Extra
s (A)
Extra
s (A)
EUR
Sens
or de
gás
quen
te (6
)Di
scha
rge
tempe
ratur
e sen
sor
(6)
Motor
para
volta
gem
espe
cial
Moto
r fo
r Spe
cial V
oltag
e
Pres
sosta
to dif
eren
cial d
e óleo
MP
54 (2
)(11)
Oil p
ress
ure s
witch
MP
54 (2
)(11)
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
iceCo
mpre
ssor
(1)
Comp
ress
or (1
)
GRUPOS CONDENSING UNITS
EUR
4NES-20Y
4TES-12Y4PES-10Y
4JE-13Y4JE-22Y
4PES-15Y4NES-12Y
-
--
-
----
-
(1) (4) (8)(2)(3)
(9)(5)(6) (10)(7)
(11)(1) (4) (8)(2)(3)
(9)(5)(6) (10)(7)
(11) Not mounted
controlos de capacidade deverá seridêntico em ambos os compressores.Não montadoOil: 1x screw socket for tube 5/8" Gas: 1x screw socket for tube 7/8"(Set Part No. 369 000-03)
necessary, depending on operating conditions
Incluido no arranque em vazioDimensões standard, poderá ser feita uma correcção dependendo dascondições de funcionamento
4VES-6Y..4NES-20Y: 0..140W (PTC heater with temp. control)4JE-13Y..6FE-50Y: 140W
With Tandem models identicalnumber of capacity regulators mustbe mounted on both compressors
Óleo: 1x tomada parafuso para tubo 5/8" Gás: 1x tomada parafuso para tubo 7/8"(Ref. 369 000-03) Não aplicável quando aplicados acessóriosde equalização de cárter.Em compressores Tandem o nº de
44VES-12Y..44NES-40Y: 2x 0..140W (PTC heater with temp. control)44JE-26Y..66FE-100Y: 2x 140WStandard voltage 230V /400Y/3/50Hz, 440..480V/3/60Hz
Not possible with oil & gas equalizingfittings
4JE-13Y..4FE-30Y: 1x capacity regulator (= 50%)6JE-22Y..6FE-50Y: 2x capacity regulator (= 66/33%)44VES-12Y..44NES-40Y: 2x capacity regulator (= 75/50/25%)44JE-26Y..44GE-60Y: 2x capacity regulator (= 75/50/25%)66JE-44Y..66FE-100Y: 4x capacity regul. (= 83/66/50/33/16%)
4VES-6Y..4NES-20Y: 0..140W (resistência PTC com controlo temp.)4JE-13Y..6FE-50Y: 140W44VES-12Y..44NES-40Y: 2x 0..140W (resistência PTC com cont. temp44JE-26Y..66FE-100Y: 2x 140WVoltagem nominal standard 230V /400Y/3/50Hz, 440..480V/3/60Hz
44JE-26Y..44GE-60Y: 2x controlos capacidade (=75/50/25%)66JE-44Y..66FE-100Y: 4x cont. capacidade (=83/66/50/33/16%)
380..420VYY/3/50Hz, 440..480VYY/3/60HzStandard voltage 230V/1/50&60Hz4VES-6Y..4NES-20Y: 1x capacity regulator (= 50%)
380..420VYY/3/50Hz, 440..480VYY/3/60HzTensão nominal standard 230V/1/50&60Hz4VES-6Y..4NES-20Y: 1x controlo capacidade (=50%)4JE-13Y..4FE-30Y: 1x controlo capacidade (=50%)6JE-22Y..6FE-50Y: 2x controlo capacidade (=66/33%)44VES-12Y..44NES-40Y: 2x controlos capacidade (=75/50/25%)
Included in start unloader Standard dimensions; a correction may be
-
--
----
-----
Compressores Tandem Tandem Compressors
Venti
lação
ad
icion
al (5
)Ad
icion
al Fa
n (5)
Aces
sório
s par
a eq
ualiz
ação
de cá
rter
(8)
Oil &
gas e
quali
zing
fitting
s (8)
1x C
ontro
lo de
Ca
pacid
ade (
2)(3
)(10)
1x C
apac
ity
Regu
lator
(2)(3
)(10)
---
-
66GE-60Y
66FE-80Y66GE-80Y
66JE-66Y
Sob p
edido
Unde
r req
uest
6HE-25Y
44VES-20Y44VES-12Y
44TES-24Y
66JE-44Y44FE-70Y203.60
190.60
TGC 2012/0 15
66HE-50Y221.00221.00253.60253.60303.20303.20
66HE-70Y
66FE-100Y
44FE-50Y44GE-60Y44GE-40Y169.00
169.00203.60
44PES-30YSob p
edido
Unde
r req
uest
97.00112.50
82.70
44HE-50Y44HE-30Y
112.50127.00127.00147.20147.20
Sob p
edido
Unde
r req
uest
69.5069.50
-
190.60
44JE-44Y
-- 6HE-35Y
110.50110.50126.80126.80151.60151.60
82.7097.00
44NES-24Y
-
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
6FE-50Y-
-
44PES-20Y
44NES-40Y
6GE-30Y
-
-
-
-
6FE-40Y
-
44JE-26Y
44TES-16Y
235228238239241
6JE-22Y-
-
-
-
-
6GE-40Y
- 4FE-35Y101.8095.3095.30 6JE-33Y
-4FE-25Y-
- - 4GE-30Y- 4GE-20Y-
84.60101.80-
- - 4HE-25Y- 4HE-15Y-
- - 4JE-22Y- 4JE-13Y-
- - 4NES-20Y- 4NES-12Y-- 4PES-15Y- 4PES-10Y-
48.50
- - 4TES-12Y- 4TES-8Y-- 4VES-10Y- 4VES-6Y-
COMP
RESS
ORES
C
OMPR
ESSO
RS
Mode
loTy
pe
GRUP
OS
CON
DENS
ING
UNIT
S
141150179190
-
-
183203192
EUREx
tras (
A)Ex
tras (
A)
Volum
e des
locad
o (50
Hz)
Disp
lacem
ent (
50Hz
)
Peso
Weig
ht
m3/h Kg
Linha
desc
arga
com
Muffle
r Di
scha
rge l
ine w
ith
Muffle
r
Linha
desc
arga
com
Muffle
r e 2
válvu
las
reten
ção
Disc
harg
e line
with
Mu
ffler a
nd 2
chec
k va
lves
Válvu
la de
servi
ço de
óle
o (9)
Oil s
ervic
e va
lve (9
)
Bobin
a volt
agem
es
pecia
l par
a CR
Spec
ial V
oltag
e Coil
for C
R
129139134
34.7034.7041.30
141139147
206196207213231224
41.3048.50
56.2056.2063.5063.5073.7073.7084.60
Compressor com volante, carga de óleo ester e pressão, Compressor with flywheel, ester oil charge, protective charge,1 válv. aspiração e 1 válv. compressão, visor a partir do tipo I I, suction & discharge shut-off valve, from Type II with sight glass,resistência de carter a partir do tipo III. crankcase heater from Type III.
Compressor com carga de óleo ester e pressão, 1 válv. aspiração e Compressor with ester oil charge, protective charge, suction & 1 válv. compressão, válvula segurança interna a partir do 4N.2, discharge shut-off valve, built-in pressure relief valve from 4H.2,resistência de carter. crankcase heater.
Compressor com carga de óleo ester e pressão,1 válvula de aspiração e Compressor with ester oil charge, protective charge, suction & discharge1 válvula de compressão, válvula segurança interna, módulo e sensor de shut-off valve, built-in pressure relief valve, discharge gas temperaturetemperatura descarga, linha inter-estágios, válvula de expansão, control device (sensor and control module), interstage pressure line,visor, filtro, válvula solenóide (1), resistência de carter. de-superheating expansion valve, sight glass, drier, solenoid valve (1),Ao encomendar, especificar refrigerante e se o funcionamento é com crankcase heater.ou sem subcooler. Specify refrigerant and whether for use with subcooler when ordering.
(1) (1)(2) (2)
(3) (3)
(4) (4)(5) (5)
(6) (6)
(7) (7)(8) (8)
(9)(9)
(10)(10) (11)(11)
-
Pres
s. dif
. óleo
elec
trónic
o (D
elta-
P) (1
)El
ect.
oil pr
ess.
switc
h (D
elta-
P) (1
)
Polie
sPu
llyes
Corre
iasDr
ive be
lts
EUR-------
Pres
sosta
to dif
eren
cial d
e óle
o (MP
54) (
1)Oi
l pre
ssur
e swi
tch(M
P 54
) (1)
------
-----
--
Extra
s (A)
Extra
s (A)
Flan
ge pa
ra m
otore
s B3
/B5 I
EC(Ø
300/4
00mm
) (6)
Coup
ling h
ousin
g B3/B
5 IE
C mo
tors
Flan
ge pa
ra m
otore
s B3
/B5 I
EC(Ø
350m
m) (6
)Co
uplin
g hou
sing B
3/B5
IEC
motor
sFl
ange
para
moto
res
B3/B
5 IEC
(Ø45
0mm)
(7)
Coup
ling h
ousin
g B3/B
5 IE
C mo
tors
-
--
---
-
------
--
-
--------
TGC 2012/0
2-speed motors individual layout is required.
Acop
lamen
to pa
ra
média
e alt
a ten
pera
tura (
5)Co
uplin
g for
med
ium
Tipo d
e aco
plame
nto
Coup
ling T
ype
- -- -- -- -- -- -
KK411
- -- -
KK211
KK620
KK211KK411
KK420
- -
16
4H.2..S6F.2: diâmetro flange motor 350 mm, comp. veio 110 mm (Ref. 300612-05) alternat. diâmetro flange motor 400 mm, comp. veio 110 mm (Ref. 300612-06)
KK630
--
Acop
lamen
to pa
ra
baixa
tenp
eratu
ra (5
)Co
uplin
g for
low
tempe
ratur
e apli
catio
n
- -
KK630
KK630
KK 620
KK630KK630
KK415
KK625KK425
KK620
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
S6H.2Y
6F.2Y KK630
FORNECIMENTO BASE: TIPO 2T.2 AO 6F.2
S6F.2YS6G.2Y
KK630KK 620
- -
6G.2Y6H.2Y4G.2Y
4P.2Y
4H.2Y
KK415KK215
4T.2Y2N.2Y
KK215
- --
VII W YVI W Y -
--
-- -
--
- -
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
iceCo
mpre
ssor
Comp
ress
or
Volan
te / P
olie
Flywh
eel /
Pulle
y
GRUPOS CONDENSING UNITS
EUR0 Y
IV YV Y
III Y
2T.2Y
4N.2Y
Tipo d
e aco
plame
nto
Coup
ling T
ype
COMPRESSORES COMPRESSORSRecíprocos Abertos Open Reciprocating
II Y
FORNECIMENTO BASE: TIPO S6H.2 AO S6F.2
Selecção válida para motores de 4 polos. Para 6 polos, 8 polos e motores
Compressores Abertos Duplo Estágio 2-Stage Open Compressors
KK625
STANDARD SUPPLY: TYPE S6H.2 TO S6F.2
FORNECIMENTO BASE: TIPO 0 AO VII STANDARD SUPPLY: TYPE 0 TO VII
STANDARD SUPPLY: TYPE 2T.2 TO 6F.2
Tensão nominal standard 230V/1/50&60HzTipo III, IV, V, 2T.2, 2N.2 = 70 WTipo VI, VII, 4T.2, 4P.2, 4N.2 = 100 W, 4H.2 .. S6F.2 = 140 W4T.2 ao 4G.2 - 1 controle capacidade = 50%
-I Y
-
-
6H.2 .. 6F.2 - 2 controle capacidade = 33/66%Tensão nominal standard 380..420V/3/50Hz, 440..480V/3/60Hz
4H.2..S6F.2: diâmetro flange motor 450 mm, comp. veio 140 mm (Ref. 300 612-07) Dimensões standard, poderá ser feita uma correcção dependendo dascondições de funcionamentoTipo IV..2N.2: 1x adaptador para tubagem 1 1/8" (Ref. 369001-01)4T.2..4N.2: 2x tomadas parafuso para tubagem 5/8" (Ref. 369000-02)4H.2..S6F.2 – Óleo: 1x tomada de parafuso para tubagem 7/8"Refrigerante: 1x tomada parafuso para tubagem 7/8" (Ref. 369000-03)
de acoplamento com flange de motor a partir 300 mm.2T.2/2N.2: diâmetro flange motor 300 mm, comp. veio 80 mm (Ref. 300612-02)4T.2/4N.2: diâmetro flange motor 300 mm, comp. veio 80 mm (Ref. 300612-03)2T.2..4N.2: diâmetro flange motor 350 mm, comp. veio 110 mm (Ref. 300612-04)
de 2 velocidades é necessário especificação individual.Acoplamento KK215, KK415 and KK425 somente para flange
Todas as cabeças.Não montado
Standard voltage 230V/1/50&60HzType III, IV, V, 2T.2, 2N.2: 70 WType VI, VII, 4T.2..4N.2: 100 W, 4H.2..S6F.2: 140 W4T.2..4G.2: 1x capacity regulator (= 50%)6H.2. 6F.2: 2x capacity regulators (= 66/33%)Standard voltage 380..420V/3/50Hz, 440..480V/3/60HzSelection is valid for 4-pole motors. For 6-, 8-pole and
Coupling KK215, KK415 and KK425 only for coupling housing with motor flange diameter from 300 mm2T.2/2N.2: motor flange diameter 300 mm, shaft length 80 mm (Part No. 300612-02)4T.2/4N.2: motor flange diameter 300 mm, shaft length 80 mm (Part No. 300612-03)2T.2..4N.2: motor flange diameter 350 mm, shaft length 110 mm (Part No. 300612-04) 4H.2..S6F.2: motor flange diameter 350 mm, shaft length 110 mm (Part No. 300612-05)
Gas: 1x screw socket for tube 7/8" (Set Part No. 369000-03) All cylinder headsNot mounted
alternat. motor flange diameter 400 mm, shaft length 110 mm (Part No. 300612-06) 4H.2..S6F.2: motor flange diameter 450 mm, shaft length 140 mm (Part No. 300 612-07) Standard dimensions; a correction may be necessary, dependent on operating conditions Type IV..2N.2: 1x adapter for tube 1 1/8" (Part No. 369001-01)4T.2..4N.2: 2x screw sockets for tube 5/8" (Part No. 369000-02)4H.2..S6F.2 – Oil: 1x screw socket for tube 7/8"
- Compressor; - Extras pretendidos no compressor; - Acoplamento/Flange/Correia/Pollie; - Chassis com montagem; - Motor eléctrico.
- Compressor; - Extras to be assembled in the compressor; - Coupling/Coupling housing/Drive belt/Pulley; - Chassis with assembly; - Electric motor.
(A) Preços aplicáveis somente quando encomendados juntamente com o compressor.(A) Prices aplicable only when ordered together with the compressor.
5.5
50
1/23/41
7.510
20253040
4
60
EUR2T.2Y a 4N.2Y 328
Tipo compressorCompressor type
429
Power
(4Poles - 380V/3F/50Hz)
Aces
sório
s par
a eq
ualiz
ação
cárte
r (9)
Oil &
gas e
quali
zing
fitting
s (9)
--
ChassisChassis
Chassis para motocompressor com montagemAssembled motocompressor chassis
-
--
--
161
Válvu
la de
servi
ço de
óle
oOi
l ser
vice v
alve
----
77
129
156223
77
-
4G.2Y a 6F.2Y
17
3
Preço (A)Price (A)
- -
TGC 2012/0
- -
-
Price (A)
2
Preço (A)
S6H.2Y .. S6F.2Y
4H.2Y .. 6F.2Y
O Y .. III Y
-
-
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
S6G.2YS6F.2Y
6F.2Y
-Compressores Abertos Duplo Estágio 2-Stage Open Compressors
S6H.2YSob pedidoUnder request
- --- - -
- -
1.5
-
---
Sob p
edido
Unde
r req
uest
- 6H.2Y6G.2Y-
153
-153
2N.2Y52-
4G.2Y4H.2Y4N.2Y
129
4P.2Y774T.2Y
-- -
-2T.2Y
-51-
VI W Y- - - - - VII W Y
-- --
--- - - -
-- -- - -
-
----
-22
IV YV Y81- -
I YII Y- -
- -- -
- -- 1418
Sob p
edido
Unde
r req
uest
46- - -
-III Y
- --
0 Y
GRUP
OS
CON
DENS
ING
UNIT
S
- - -- - --
-
Prote
cção
cabe
ças
para
água
mar
(10)
Seaw
ater r
esist
ant
cylin
der h
eads
(10)
-
--
Extra
s (A)
Extra
s (A)
COMP
RESS
ORES
C
OMPR
ESSO
RS
Mode
loTy
pe
-- -
Cabe
ças a
rrefec
idas a
ág
ua (1
0)W
ater-c
ooled
cylin
der h
eads
(10)
-EUR
Arra
nque
em va
zio (1
)St
art u
nload
er (1
)
1x C
ontro
lo de
ca
pacid
ade
1x C
apac
ity re
gulat
or
Bobin
a volt
agem
es
pecia
l par
a SU
/CR
Spec
ial V
oltag
e Coil
for S
U /C
R
Válvu
la de
reten
ção
(8)
Chec
k valv
e (8)
Venti
lação
adici
onal
(4)
Aditio
nal fa
n (4)
Sens
or gá
s que
nte e
módu
lo co
nt. (1
)Di
scha
rge t
emp.
sens
or an
d con
t. mo
dule
(1)
Sub-
arre
feced
or in
ter-
estág
ios (1
1) Li
quid
subc
ooler
(11)
-- - 11
Volum
e des
locad
o (50
Hz)
Disp
lacem
ent (
50Hz
)
Peso
Weig
ht
m3/h Kg
IV Y .. V Y
VI W Y
2T.2Y .. 2N.2Y
VII W Y
4T.2Y .. 4N.2Y
B 2
Chassis para motocompressor sem montagemUnassembled motocompressor chassis 355
1
B 3
Resguardo de correiaDrive belt guard - 141
CorreiasDrive belts
TipoType
QuantidadeQuantity
A
SPA 5
SPA
B 4
SPA 2
5
SPA 3
When buying an open drive compressor the following should be considered
EUR
Potência
CV
Na aquisição de um compressor aberto deverá ser considerado
Motores eléctricos(4Pólos - 380V/3F/50Hz)
Electric motors
15
(A) Preços aplicáveis somente quando encomendados juntamente com o compressor.(A) Prices aplicable only when ordered together with the compressor.
control unit SE-E1 (temperature & phase sequence monitoring, manual reset), terminal boxenclosure IP 54, protective charge, 4 vibration dampers.
(Controlo temperatura, controlo de fase, rearme manual), caixa de ligações protecçãoclasse IP 54, carga de pressão, 4 apoios anti-vibratórios.
Screw compressor in 2-shaft design with asymmetric rotor profile, rolling contact bearings,suction shut-off valve,discharge side: solder bushing, oil injection nozzle, integrated checkvalve, integrated pressure relief valve, oil injection kit (solenoid valve, filter, flow control,SE-B2 control unit, electrolytic capacitor, sight glass), capacity control (2-step) / start unloader,
Compressor parafuso com design 2-veios com perfil de rotor assimétrico, rolamentoscontacto, válvula de aspiração, ligação de soldar na descarga, injector de injecção deóleo, válvula retenção e diferencial pressão interna, kit para injecção de óleo (válvulasolenóide, filtro, fluxostato, SE-B2, condensador electrolítico, visor), controlocapacidade/arranque em vazio, motor part-winding com sensores de temperaturaPTC, sensor temperatura gás descarga, módulo controlo electrónico SE-E1
built in part winding motor with PTC sensors, discharge temperature sensor, electronic
SE-E1 (temperature & phase sequence monitoring, manual reset), terminal box enclosureclass IP54, protective charge.
Compressor parafuso com design 2-veios com perfil de rotor assimétrico, rolamentoscontacto, ligação de soldar na aspiração e descarga, injector de injecção deóleo, válvula retenção e diferencial pressão interna, kit para injecção de óleo (válvulasolenóide, filtro, fluxostato, SE-B2, condensador electrolítico, visor), controlocapacidade (3)/arranque em vazio, motor part-winding com sensores de temperaturaPTC, sensor temperatura gás descarga, módulo controlo electrónico SE-E1(Controlo temperatura, controlo de fase, rearme manual), caixa de ligações protecçãoclasse IP 54, carga de pressão.
Screw compressor in 2-shaft design with asymmetric rotor profile, rolling contact bearings,connections: flange with solder bushing, oil injection nozzle, integrated check valve andpressure relief valve, integrated oil management system (automatic oil stop valve, oil filter,monitoring of oil flow, direction of rotation and oil filter clogging with 2x control units SE-B2and 1x electronic capacitor), oil sight glass, capacity control (3) / start unloader, built-in partwinding motor with PTC sensors, discharge temperature sensor (PTC), electronic control unit
EXTENT OF DELIVERY - HS.85
--
------
--
---
------
--
-------
------
-
--
---
-
----
18 TGC 2012/0
Bobin
a volt
agem
es
pecia
l par
a SU
/ CR
(3)
Spec
ial V
oltag
e Coil
for S
U / C
R (3
)
Bobin
a volt
agem
espe
cial
para
solen
óide d
a linh
a óle
o (3)
Spec
ial vo
ltage
coil
for o
il sole
noid
valve
(3)
Motor
para
volta
gem
espe
cial
Moto
r fo
r Spe
cial V
oltag
e
Prote
cção
de m
otor
SE-E
2 (2)
(6)
SE-E
2 Pro
tectio
n de
vice (
2)(6
)
Prote
cção
de m
otor
SE-C
1 (S
E-E1
+ S
E-B2
supr
imido
) (2)
(7)
SE-C
1 Pro
tectio
n de
vice (
SE-E
1 + S
E-B2
omitte
d) (2
)(7)
HSN8591-160HSN8571-125HSK8571-140HSK8571-110 (4)HSK8561-125HSK8561-90 (4)
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
HSK7471-90
HSN7461-70 HSK7461-80
FORNECIMENTO BASE - HS.53 A HS.74
EXTENT OF DELIVERY - HS.53 TO HS.74
HSK7471-70 (4)
HSK8551-110HSK8551-80 (4)HSN7471-75
HSK7461-60 (4) HSN7451-60 HSK7451-70 HSK7451-50 (4) HSN6461-50 HSK6461-60 HSK6461-40 (4) HSN6451-40
--
HSK5353-35
HSK6451-50 HSK6451-40 (4) HSN5363-30
HSN5343-20
GRUPOS CONDENSING UNITS
EUR EURHSK5343-30
HSK5363-40HSN5353-25
-
COMPRESSORES COMPRESSORSParafuso Semi-herméticos Semi-hermetic Screw
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
ice
Extra
s (A)
Extra
s (A)
Comp
ress
or (1
)(in
clui k
it par
a inj
ecçã
o de ó
leo) (
2)Co
mpre
ssor
(1)
(in
clude
s oil i
njecti
on
kit) (
2)
Inter
rupto
r de f
luxo d
e óle
o OFC
(SE
-B2
supr
imido
) (2)
Oil fl
ow co
ntrol
OFC
(S
E-B2
omitte
d) (2
)
Cont.
Cap
acida
de /
Arra
nque
em va
zio (2
)(3)
Capa
city R
egula
tor /
Star
t un
loade
r (2)
(3)
Válvu
la de
corte
na
aspir
ação
Sucti
on sh
ut-off
valve
Válvu
la de
corte
na
desc
arga
Disc
harg
e shu
t-off
valve
------
-
-
-
FORNECIMENTO BASE - HS.85
(1) 400V / /3/50Hz, 460V / /3/60Hz (1) 400V / /3/50Hz, 460V / /3/60Hz(2) Tensão nominal standard 230V/1/50Hz (2) Standard voltage 230V/1/50Hz(3) 2x Controlos capacidade (2 bobinas) (3) 2-step capacity control (2 coils)(4) Para aplicação standard em R134a (4) For standard application R134a(5) Protecção contra formação de gelo ou condensação (5) Protection against frost or condensate formation
em aplicações de baixa temperatura e baixo sobreaquecimento with low temperature application and low superheat(6) SE-E2: Funcionamento semelhante ao SE-E1 aplicável (6) SE-E2: Protection functions like SE-E1 suitable for
em funcionamento com variador de frequência frequency inverter operation(7) Módulo com funções de protecção melhoradas (7) Module with enhanced protection functions(8) Somente para compressores de troca (8) Only for exchange compressors
-
-
-
-
-
-
---
-
----
---
-
-
-----
-
------
--
-
--------
--
--
-
--
--
-
--
-
---
-
--
-
-
TGC 2012/0 19
HSK7471-70 (4)
---
HSN8571-125HSK8571-140
HSN8591-160
HSK8571-110 (4)HSK8561-125
--
HSN7471-75-
326550
HSK7471-90
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
326250.00250.00
680
HSN7451-60 HSK7461-60 (4) HSK7461-80 HSN7461-70
HSK8551-80 (4)
GRUP
OS
CON
DENS
ING
UNIT
S
HSK8561-90 (4)HSK8551-110
HSK7451-50 (4) HSK7451-70
HSK6461-60 HSN6461-50
HSN6451-40 HSK6461-40 (4)
HSK6451-40 (4) HSK6451-50
-
HSK5363-40HSN5363-30
169183174
--
COMP
RESS
ORES
C
OMPR
ESSO
RS
Mode
loTy
pe
HSK5353-35HSN5353-25
HSK5343-30HSN5343-20
Extra
s (A)
Extra
s (A)
Volum
e des
locad
o (50
Hz)
Disp
lacem
ent (
50Hz
)
Sem
kit de
injec
ção
de ól
eo(8
)W
ithou
t oil i
njecti
on ki
t(8
)
Adap
tador
e inj
ector
pa
ra in
jecçã
o de
líquid
oAd
apter
& in
tegra
l no
zzle
for liq
uid
injec
tion
Sem
apoio
s anti
-vib
rátic
osW
ithou
t vibr
ation
da
mper
s
Válvu
la de
corte
para
inj
ecçã
o de ó
leoSh
ut-off
valve
for o
il inj
ectio
n
----
246238
314310
336
Apoio
s anti
-vibr
ático
sVi
brati
on da
mper
sEUR
Adap
tador
e vá
lvula
de co
rte pa
ra
Econ
omiza
dor
Adap
ter an
d shu
t-off
valve
for E
cono
mize
r
Adap
tador
para
inj
ecçã
o de l
íquido
Adap
ter fo
r liqu
id inj
ectio
n
Sem
válvu
la de
as
piraç
ão, c
om fla
nge
e liga
ção d
e sold
arW
ithou
t suc
tion s
hut-
off va
lve, w
ith fla
nge
& so
lder b
ushin
g
165.00165.00165.00192.00
Peso
Weig
ht
m3/h Kg170166178
234238
297
84.0084.00
100.00100.00118.00118.00140.00140.00140.00 234
238
305297310
560560580580600600
192.00192.00220.00220.00220.00
410.00410.00535.00
250.00315.00315.00359.00359.00410.00
FORNECIMENTO BASE EXTENT OF DELIVERYCompressor parafuso com design 2-veios com perfil de rotor assimétrico, rolamentos Screw compressor in 2-shaft design with asymmetric rotor profile, rolling contactcontacto, flange para válvulas de aspiração e descarga, válvula retenção e diferencial bearings, suction & discharge flange with solder bushing, integrated check valve,pressão interna, separador de óleo interno com componentes de injecção de óleo, integrated pressure, relief valve, flanged-on oil separator with integrated oil injectionresistência óleo, válvula de serviço de óleo, filtro de óleo, visor, carga de óleo, controlo components, oil heater, oil service valve, oil filter, sight glass, oil charge, capacitycapacidade (4)/arranque em vazio, motor part-winding com sensores de temperatura control (4) / start unloader, built-in motor with PTC temperature sensors, discharge PTC, sensor temperatura gás descarga, módulo controlo electrónico SE-E1 temperature sensor, electronic control unit SE-E1 (temperature & phase sequence (Controlo temperatura, controlo de fase, rearme manual), caixa de ligações protecção monitoring, manual reset), terminal box enclosure class IP 54, protective charge.classe IP 54, carga de pressão.
(A) Preços aplicáveis somente quando encomendados juntamente com o compressor.(A) Prices aplicable only when ordered together with the compressor.
20 TGC 2012/0
-
-
-
-
-
--
-
EUR-
-
-
-
-
-
-
--
-
Prote
cção
de m
otor
SE-C
1 (S
E-E1
su
prim
ido) (
2)(7
)SE
-C1 P
rotec
tion
devic
e (SE
-E1
omitte
d) (2
)(7)
Motor
para
volta
gem
espe
cial
Motor
fo
r Spe
cial V
oltag
e
Resis
tência
de
aque
cimen
to de
óleo
(2
)(3)
Oil h
eater
(2)(3
)
Prote
cção
de m
otor
SE-E
2 (2)
(6)
SE-E
2 Pro
tectio
n de
vice (
2)(6
)
CSH95103-280YCSH95113-320Y
--
CSH9593-300(Y)--
CSH9583-280(Y)CSH9593-240Y
CSH9583-210YCSH9573-240(Y) -CSH9573-180YCSH9563-210(Y)
CSH9553-180(Y)
---
CSH8593-140YCSH8593-160Y (8)
CSH8583-125YCSH8583-140Y (8)
CSH8573-140(Y)CSH8573-110Y
CSH8553-80Y-
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
CSH8563-90YCSH8563-125(Y)
CSH7593-100Y (8)
CSH8553-110(Y)
CSH9563-160Y
-CSH7593-90Y
-
--
--CSH7573-90(Y)
CSH7583-90Y (8)CSH7583-80Y
CSH7573-70Y
---
-
CSH7563-80(Y)CSH7563-60Y
CSH7553-50YCSH6593-60Y
CSH7553-70(Y)
CSH6563-40YCSH6563-60(Y)
COMPRESSORES COMPRESSORSParafuso Compactos Semi-herméticos Semi-hermetic Compact Screw
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
ice
Extra
s (A)
Extra
s (A)
CSH6553-50(Y)
Comp
ress
or (1
)Co
mpre
ssor
(1)
Óleo
ester
para
re
friger
antes
HFC
(d
esign
ação
Y)
Ester
oil fo
r HFC
re
friger
ants
(Y de
signa
tion)
Contr
olo de
Ca
pacid
ade /
Ar
ranq
ue em
vazio
(2)(4
)Ca
pacit
y Reg
ulator
/ St
art u
nload
er (2
)(4)
Bobin
a volt
agem
es
pecia
l par
a SU
/ CR
(5)
Spec
ial V
oltag
e Coil
for S
U / C
R (5
)
Válvu
la de
reten
ção
integ
rada
Integ
rated
chec
k va
lve
GRUPOS CONDENSING UNITS
EURCSH6553-35Y
CSH6583-50Y
(1) (1)(2) (2)(3) (3)(4) (4)
(5) (5)(6) (6)
(7) (7)(8) (8)
SE-E2: Funcionamento semelhante ao SE-E1 aplicávelem funcionamento com variador de frequênciaMódulo com funções de protecção melhoradasR134a Modelos para gama de aplicações alargada
SE-E2: Protection functions like SE-E1 suitable for frequency inverter operationModule with enhanced protection functionsR134a Models for extended application range
400V /3/50Hz, 460V /3/60Hz (Part Winding ou DOL)Tensão nominal standard 230V/1/50&60HzCSH65: 200 W / CSH75: 200 W / CSH85: 300 W / CSH95: 300WControlo capacidade duplo (arranque em vazio)– variação infinita ou controlo por 4 partes4 bobinas
400V /3/50Hz, 460V /3/60Hz (Part Winding or DOL)Standard voltage 230V/1/50&60HzCSH65: 200 W / CSH75: 200 W / CSH85: 300 W / CSH95: 300WDual capacity control (start unloading)– infinite slide or 4-step control4 coils
TGC 2012/0 21
Válv.
contr
olo co
m ad
apt.
para
arre
feced
or
óleo e
xtern
o (2)
Contr
ol va
lve in
cl.
adap
ter fo
r exte
rnal
oil
coole
r (2)
Adap
tador
e inj
ector
pa
ra in
jecçã
o de
líquid
oAd
apter
& in
tegra
l no
zzle
for liq
uid
injec
tion
Adap
tador
e vá
lvula
de co
rte pa
ra
Econ
omiza
dor
Adap
ter an
d shu
t-off
valve
for E
cono
mize
r
CSH95113-320Y
Contr
olado
r níve
l de
óleo o
pto-e
lectró
nico
OLC-
D1-S
(2)
Opto-
electr
onic
oil
level
contr
ol OL
C-D1
-S
(2)
OLC-
D1-S
prep
arad
o(se
m mó
dulo
de
contr
olo)
OLC-
D1-S
prep
ared
(P
rism
unit m
ounte
d w/
o con
trol m
odule
)
CSH9593-240Y
CSH8593-160Y (8)
CSH9593-300(Y)CSH95103-280Y
140014601500
CSH9583-210YCSH9583-280(Y)
CSH9573-240(Y)
CSH9563-210(Y)
CSH9553-180(Y)CSH9563-160Y
CSH9573-180Y700.00700.00
CSH8593-140Y870
CSH8573-140(Y)CSH8583-125Y
870860860 CSH8583-140Y (8)
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERSCSH8563-125(Y)
CSH8573-110Y
CSH8563-90Y
CSH7593-100Y (8)CSH8553-80YCSH8553-110(Y)
850
850840860
315.00359.00359.00410.00
CSH7583-80Y
535840
295.00295.00336.00336.00315.00
CSH7573-70YCSH7563-80(Y)
CSH7583-90Y (8)CSH7593-90Y
CSH7573-90(Y) 520535530
535
258.00258.00
CSH7563-60YCSH7553-70(Y)
515525
227.00227.00
CSH7553-50YCSH6593-60Y
520505197.00
197.00
CSH6583-50YCSH6563-60(Y)
365220.00
GRUP
OS
CON
DENS
ING
UNIT
SCO
MPRE
SSOR
ES
COM
PRES
SORS
Mode
loTy
pe
CSH6553-35Y
CSH6563-40YCSH6553-50(Y)
Silen
ciado
r par
a linh
a de
desc
arga
Muffle
r for
disc
harg
e lin
e
EUR
Extra
s (A)
Extra
s (A)
Volum
e des
locad
o (50
Hz)
Disp
lacem
ent (
50Hz
)
Peso
Weig
ht
m3/h
530
Kg
Válvu
la de
corte
na
aspir
ação
Sucti
on sh
ut-off
valve
Válvu
la de
corte
na
desc
arga
Disc
harg
e shu
t-off
valve
Apoio
s anti
-vibr
ático
sVi
brati
on da
mper
s
317325317325365
137.00137.00170.00170.00195.00
87012901280131012901320135013801370
410.00470.00470.00535.00535.00
910.001015.001120.00
535.00615.00615.00
805.00805.00910.00
FORNECIMENTO BASE EXTENT OF DELIVERYCompressor parafuso com design 2-veios com perfil de rotor assimétrico, rolamentos Screw compressor in 2-shaft design with asymmetric rotor profile, rolling contactcontacto, flange para válvulas de aspiração e descarga, válvula retenção e diferencial bearings, suction & discharge flange with solder bushing, integrated check valve,pressão interna, separador de óleo interno com componentes de injecção de óleo, integrated pressure, relief valve, flanged-on oil separator with integrated oil injectionresistência óleo, válvula de serviço de óleo, filtro de óleo, visor, carga de óleo, controlo components, oil heater, oil service valve, oil filter, sight glass, oil charge, capacitycapacidade (4)/arranque em vazio, motor part-winding com sensores de temperatura control (4) / start unloader, built-in motor with PTC temperature sensors, discharge PTC, sensor temperatura gás descarga, módulo controlo electrónico SE-E1 temperature sensor, electronic control unit SE-E1 (temperature & phase sequence (Controlo temperatura, controlo de fase, rearme manual), caixa de ligações protecção monitoring, manual reset), terminal box enclosure class IP 54, protective charge.classe IP 54, carga de pressão.
(A) Preços aplicáveis somente quando encomendados juntamente com o compressor.(A) Prices aplicable only when ordered together with the compressor.
22 TGC 2012/0
CSW95113-280YCSW95103-240YCSW9593-240 (9) -CSW9593-210YCSW9583-210 (9) -CSW9583-180YCSW9573-180 (9) -CSW9573-160YCSW9563-160 (9) -CSW9563-140YCSW8593-140 (9) -CSW8593-125YCSW8583-125 (9) -CSW8583-110YCSW8573-110 (9) -CSW8573-90YCSW7593-90 (9) -CSW7593-80YCSW7583-80 (9) -
-CSW7583-70Y
-CSW7573-60Y
CSW6593-50Y
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
CSW6583-40Y
Prote
cção
de m
otor
SE-C
1 (S
E-E1
su
prim
ido) (
2)(7
)SE
-C1 P
rotec
tion
devic
e (SE
-E1
omitte
d) (2
)(7)
CSW6583-50 (9)
CSW6593-60 (9)
CSW7573-70 (9)
COMPRESSORES COMPRESSORSParafuso Compactos Semi-herméticos Semi-hermetic Compact Screw
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
ice
Extra
s (A)
Extra
s (A)
Comp
ress
or (1
)Co
mpre
ssor
(1)
Motor
para
volta
gem
espe
cial
Motor
fo
r Spe
cial V
oltag
e
Resis
tência
de
aque
cimen
to de
óleo
(2
)(3)
Oil h
eater
(2)(3
)
Prote
cção
de m
otor
SE-E
2 (2)
(6)
SE-E
2 Pro
tectio
n de
vice (
2)(6
)
Óleo
ester
para
re
friger
antes
HFC
(d
esign
ação
Y)
Ester
oil fo
r HFC
re
friger
ants
(Y de
signa
tion)
Contr
olo de
Ca
pacid
ade /
Ar
ranq
ue em
vazio
(2)(4
)Ca
pacit
y Reg
ulator
/ St
art u
nload
er (2
)(4)
Bobin
a volt
agem
es
pecia
l par
a SU
/ CR
(5)
Spec
ial V
oltag
e Coil
for S
U / C
R (5
)
Válvu
la de
reten
ção
integ
rada
Integ
rated
chec
k va
lve
GRUPOS CONDENSING UNITS
EUR EUR
-
(1) CSW65..CSW85: 400V /3/50Hz, 460V /3/60Hz (Part Winding ou DOL) (1) CSW65..CSW85: 400V /3/50Hz, 460V /3/60Hz (Part Winding or DOL)CSW95: 400V /3/50Hz, 460V /3/60Hz (arranque Y/ ou DOL) CSW95: 400V /3/50Hz, 460V /3/60Hz (Star/Delta start or DOL)
(2) Tensão nominal standard 230V/1/50&60Hz (2) Standard voltage 230V/1/50&60Hz(3) CSW65 & CSW75: 200 W / CSW85 & CSW95: 300 W (3) CSW65 & CSW75: 200 W / CSW85 & CSW95: 300 W(4) Controlo capacidade duplo (arranque em vazio) - variação infinita ou (4) Dual capacity control (start unloading) - infinite slide or 4-step control
controlo por 4 partes (5) 4 coils(5) 4 bobinas (6) SE-E2: Protection functions like SE-E1 suitable for frequency inverter operation (6) SE-E2: Funcionamento semelhante ao SE-E1 aplicável em funcionamento (7) Module with enhanced protection functions
com variador de frequência (8) CSW9563 and CSW9573: Including motor cover for larger connection (DN 125) (7) Módulo com funções de protecção melhoradas (9) Compressor models for R22 application(8) CSW9563 and CSW9573: Inclui cobrtura de motor para ligação alargada (DN 125) (9) Modelos para aplicação a R22
1350805.00
Contr
olado
r níve
l de
óleo o
pto-e
lectró
nico
OLC-
D1-S
(2)
Opto-
electr
onic
oil
level
contr
ol OL
C-D1
-S
(2)
OLC-
D1-S
prep
arad
o(se
m mó
dulo
de
contr
olo)
OLC-
D1-S
prep
ared
(P
rism
unit m
ounte
d w/
o con
trol m
odule
)
Válvu
la de
corte
na
aspir
ação
Sucti
on sh
ut-off
valve
-
-- -
Válv.
contr
olo co
m ad
apt.
para
arre
feced
or
óleo e
xtern
o (2)
Contr
ol va
lve in
cl.
adap
ter fo
r exte
rnal
oil
coole
r (2)
-
--
- -
-
Apoio
s anti
-vibr
ático
sVi
brati
on da
mper
s
TGC 2012/0 23
- CSW95113-280YCSW95103-240Y
- - CSW9593-240 (9)CSW9593-210Y
13701430
--
-
CSW9583-210 (9)-
CSW9583-180Y- - CSW9573-180 (9)1290
13501370
700.00CSW9573-160Y
- - CSW9563-160 (9)1290
- -
CSW9563-140Y- - CSW8593-140 (9)
12801280
CSW8583-110Y- - CSW8573-110 (9)
870870
- -
CSW8593-125Y- - CSW8583-125 (9)
860860
- -
CSW7593-80Y- - CSW7583-80 (9)
850850
- -
CSW8573-90Y- - CSW7593-90 (9)535
- - CSW7583-70Y- - CSW7573-70 (9)
295.00
- -- -- -
CSW6583-50 (9)
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
- --
COMP
RESS
ORES
C
OMPR
ESSO
RS
Mode
loTy
pe
CSW6583-40Y
GRUP
OS
CON
DENS
ING
UNIT
S
CSW6593-50Y
CSW7573-60YCSW6593-60 (9)
Extra
s (A)
Extra
s (A)
Volum
e des
locad
o (50
Hz)
Disp
lacem
ent (
50Hz
)
Peso
Weig
ht
Silen
ciado
r par
a linh
a de
desc
arga
Muffle
r for
disc
harg
e lin
e
EUR m3/h Kg
Válvu
la de
corte
na
desc
arga
Disc
harg
e shu
t-off
valve
Adap
tador
e vá
lvula
de co
rte pa
ra
Econ
omiza
dor
Adap
ter an
d shu
t-off
valve
for E
cono
mize
r
Adap
tador
e inj
ector
pa
ra in
jecçã
o de
líquid
oAd
apter
& in
tegra
l no
zzle
for liq
uid
injec
tion
365365365365520520530530535
1460
195.00195.00220.00220.00258.00258.00
295.00336.00
805.00
336.00410.00410.00470.00470.00535.00
910.00910.001015.001120.00
535.00615.00615.00700.00
FORNECIMENTO BASE OS.53 A OS.74 FORNECIMENTO BASE OS.85Compressor parafuso com 2-veios com perfil de rotor assimétrico, rolamentos contacto, Compressor parafuso com 2-veios com perfil de rotor assimétrico, rolamentos de contacto,válvula de aspiração, ligação descarga soldar, injector de injecção de óleo, válvula de ligações de soldar na aspiração e descarga, injector de injecção de óleo, válvula deretenção e diferencial pressão interna, kit para injecção de óleo (válvula solenóide, retenção e diferencial pressão internas, sistema de injecção de óleo integrado (válvula de corte,filtro, fluxostato, SE-B2, condensador electrolítico, visor para OSK/OSN), controle automática, filtro de óleo, fluxostato, direcção de rotação e entupimento do filtro com 2x SE-B2capacidade/arranque em vazio (OS.74), sensor temperatura gás descarga, protecção e um condensador electrolítico), visor de óleo, controlo de capacidade (3)/arranque em vazio,pressão. sensor temperatura gás descarga, protecção pressão.
EXTENT OF DELIVERY OS.53 TO OS.74 EXTENT OF DELIVERY OS.85Screw compressor in 2-shaft design with asymmetric rotor profile, rolling contact Screw compressor in 2-shaft design with asymmetric rotor profile, rolling contact bearings,bearings, suction shut-off valve, discharge side: solder/welding bushing, oil injection suction and discharge connections: flange with solder/welding bushing, oil injection nozzle,nozzle, integrated check valve, integrated pressure relief valve, oil injection kit integrated check valve and pressure relief valve, integrated oil management system (automatic(solenoid valve, filter, flow control, SE-B2 control unit, electrolytic capacitor, sight oil stop valve, oil filter, monitoring of oil flow, direction of rotation and oil filter clogging withglass for OSK/OSN), capacity control/start unloader (OS.74), discharge temperature 2x control units SE-B2 and 1x electronic capacitor), oil sight glass for OSK/OSN, capacitysensor, protective charge. control (3)/start unloader, discharge temperature sensor (PTC), protective charge.
(A) Preços aplicáveis somente quando encomendados juntamente com o compressor.(A) Prices aplicable only when ordered together with the compressor.
-
-
-
- -- -
--
- --
- -- -- -
-
--
-
-
-
-
-- -
-
-
-
-
--
-----
KS 620
--
--
KS 800-
- -
----
KS 800-
KS 720 KS 730
KS 730KS 730
---
-
---
- ---
----
--
-
EUR
-
-
---
-
-
-- -
-
COMPRESSORES COMPRESSORSParafuso Abertos Open Drive Screw
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
ice
Comp
ress
or (in
clui k
it pa
ra in
jecçã
o de ó
leo)
(2)
Comp
ress
or (in
clude
s oil
injec
tion k
it) (2
)
Flan
ge pa
ra m
ontag
em de
mo
tores
B3/B
5 IEC
D/L
660/1
40Co
uplin
g Hou
sing f
or
B3/B
5 IEC
-Moto
rs D/
L 66
0/140
Extra
s (A)
Extra
s (A)
Acop
lamen
to até
16
0kW
(1)
Coup
ling u
p to 1
60kW
(1
)
Tipo d
e aco
plame
nto
(1)
Coup
ling T
ype (
1)
Flan
ge pa
ra m
ontag
em de
mo
tores
B3/B
5 IEC
D/L
350/1
10 ou
400/1
10 (1
)Co
uplin
g Hou
sing f
or
B3/B
5 IEC
-Moto
rs D/
L 35
0/110
or 40
0/110
(1)
Flan
ge pa
ra m
ontag
em de
mo
tores
B3/B
5 IEC
D/L
400/1
10 ou
450/1
10 (1
)Co
uplin
g Hou
sing f
or
B3/B
5 IEC
-Moto
rs D/
L 40
0/110
or 45
0/110
(1)
Flan
ge pa
ra m
ontag
em de
mo
tores
B3/B
5 IEC
D/L
450/1
40 ou
550/1
40 (1
)Co
uplin
g Hou
sing f
or
B3/B
5 IEC
-Moto
rs D/
L 45
0/140
or 55
0/140
(1)
OSN5341 ----
--
-- -
---
OSN5351OSK5351
-KS 620 --- --
-
OSN5361OSK5361 -KS 620
KS 620--
--
OSK7451 -
KS 720KS 720 -
-KS 730OSN7441OSK7441
KS 730--
--
OSN7451-
-
OSK7471OSN7461 - -
-
-KS 730
-
OSK8551OSN7471
-
KS 720-
-
- --
KS 730KS 730KS 730
KS 800
OSK7461
OSK8561 KS 800
GRUPOS CONDENSING UNITS
EUROSK5341
---
OSK8571-
-
--
KS 620
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
OSK8581
---
-
-OSN8571 --
--KS 800-
-
OSNA5341OSKA5341
KS 800
OSN8591OSK8591
-
KS 800
---
- - -Compressores de parafuso abertos para NH3 Open drive NH3 screw compressors
-
---
OSNA5361 KS 620OSKA5361OSNA5351
---
-
24 TGC 2012/0
OSKA7441
---
-
-
OSNA7451
OSNA7441
-
OSNA7461
OSKA5351
--
--
--
-
---
- -- -
KS 620KS 620
----KS 720
- ---
KS 620KS 620
KS 730- -
OSKA7451
-
----
KS 720KS 720KS 720
KS 730KS 730
-
-
--
KS 800
KS 800-OSKA8571
OSNA7471KS 720KS 720
KS 730KS 730
- KS 800
OSKA8551-
OSKA7471
OSKA7461
---
-----
--
KS 730
-
KS 720KS 720
-
OSKA8591 KS 800 ---OSKA8581
KS 800 ---
--
OSNA8591
OSNA8571
OSKA8561
KS 720
Acop
lamen
to até
45
kW (1
)Co
uplin
g up t
o 45k
W
(1)
Acop
lamen
to até
80
kW (1
)Co
uplin
g up t
o 80k
W
(1)
Tipo d
e aco
plame
nto
(1)
Coup
ling T
ype (
1)
Tipo d
e aco
plame
nto
(1)
Coup
ling T
ype (
1)-
KS 720
-
KS 720KS 720
KS 620KS 620
----
-
--
--
KS 800KS 800
- -
KS 730
(1) Ao encomendar, dados de motor necessários: (1) When ordering the following motor data must be stated:potência motor / dimensão estrutura IEC, sistema protecção, - motor power / IEC frame size, enclosure class,diam. flange (Ø), diam. veio, comprimento veio (L) - flange Ø, shaft Ø, shaft length
(2) Tensão nominal standard 230V/1/50 Hz (2) Standard voltage 230V/1/50 Hz(3) OS.5341..OS.A5361: 1x controlo capacidade (1 bobina) (3) OS.5341..OS.A5361: 1-step capacity control (1 coil)
OS.7441: 1x controlo capacidade (1 bobina) OS.7441: 1-step capacity control (1 coil)OS.7451..OS.7471: 2x controlos capacidade (2 bobinas) OS.7451..OS.7471: 2-step capacity control (2 coils) OS.8551..OS.8591: Controlo capacidade duplo (arranque em vazio) OS.8551..OS.8591: Dual capacity control (start unloading)– variação infinita ou controlo por 3 partes (4 partes) – infinite slide or 3-step (4-step) control
(4) Com flange e ligação de soldar, sem válvula de aspiração (4) With flange and solder bushing, without suction shut-off valve
---
-
-
--
--
--------
-
-----
-
-
------
--
-
--
--
------
-
------
---
----
-
---
---
-
---
65
-
-
--
-
Compressores de parafuso abertos para NH3 Open drive NH3 screw compressors
----
---
----
GRUP
OS
CON
DENS
ING
UNIT
SCO
MPRE
SSOR
ES
COM
PRES
SORS
Mode
loTy
pe
OSK5341
Alter
n. int
erru
ptor f
luxo
óleo "
OFC"
incl.
SE-
B2
para
contr
olo te
mp. g
ás
desc
arga
(2)
Alt.:
oil fl
ow co
ntrol
"OFC
" inc
l. SE-
B2 fo
r disc
harg
e ga
s tem
p. co
ntrol
(2)
Cont.
capa
cidad
e /
Arra
nque
em va
zio (2
)(3)
Cap.
regu
lator
/ S
tart
unloa
der (
2)(3
)
Bobin
a volt
agem
espe
cial
para
SU/
CR (3
)Sp
ecial
Volt
age C
oil fo
r SU/
CR (3
)Bo
bina v
oltag
em es
pecia
l pa
ra vá
lvula
retor
no ól
eo
(3)
Spec
ial V
oltag
e Coil
for o
il sole
noid
valve
(3)
OSN5341OSK5351OSN5351-
OSN5361
--- - -
Sob p
edido
Unde
r req
uest
OSN7441- -- - -
--
OSN7451---
--
--
-
OSN7461---
--
OSK7471OSN7471-
--
--
OSK8561--
--
OSK8571OSN8571
- --
-- 350
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
OSKA5341
OSN8591OSK8591360
360
OSKA5351
OSKA7441
OSKA5361
656565
176
25
OSNA5361
TGC 2012/0
OSNA5351
OSNA7441OSKA7451
OSKA7461-OSNA7461OSKA7471OSNA7471
- Sob p
edido
Unde
r req
uest
--
-
OSKA8551OSKA8561OSKA8571
---
--
-OSNA8571OSKA8581
OSNA8591OSKA8591
----
360360360-
Extra
s (A)
Extra
s (A)
EUR
Adap
tador
e inj
ector
para
inj
ecçã
o de l
íquido
Adap
ter &
integ
ral n
ozzle
for
liquid
injec
tion
Válvu
la de
corte
na
desc
arga
Disc
harg
e shu
t-off
valve
Adap
tador
para
Ec
onom
izado
rAd
apter
for
Econ
omize
r
--
Válvu
la de
corte
na
aspir
ação
Sucti
on sh
ut-off
valve
-Vá
lvula
de co
rte pa
ra
injec
ção d
e óleo
Shut-
off va
lve fo
r oil
injec
tion
Adap
tador
e vá
lv. co
rte
para
Eco
nomi
zado
rAd
apter
and s
hut-o
ff va
lve
for E
cono
mize
r con
necti
on
--
--
OSNA7451
Sem
válvu
la de
as
piraç
ão (4
)W
ithou
t suc
tion s
hut-
off va
lve (4
)
OSNA5341
OSK8581
OSK8551
- OSK7461
OSK7451
360
176
OSK7441
OSK5361
350
Volum
e des
locad
o (50
Hz)
Disp
lacem
ent (
50Hz
)
Peso
Weig
ht
m3/h Kg
6565
176176176188
656565656565
176176176
188350350350
176176188188350350350
176176
Permutador "Shell and Tube" com tampos removíveis para funcionamento Shell and tube heat exchanger with removeable water end covers,com água do mar e com protecção das tampas do lado da água. seawater resistant design with plastic coated covers (water side).
Permutador "Shell and Tube" com tubos de aço soldados, tampos removíveis Shell and tube heat exchanger with welded-in steel tubes and removeable water para funcionamento com água do mar e com protecção das tampas do lado da água. end covers, corrosion protection design with plastic coating (water side).
Alheta/tubo com ventilação forçada. Finned oil cooler with fan.
Ver tabela abaixo See table below
(1) Somente para modelos CSW a R134a (1) Only for CSW R134a models(2) Somente para compressores semi-herméticos (2) Only for semi-hermetic compressors
(A) Preços aplicáveis somente quando encomendados juntamente com o arrefecedor de óleo(A) Prices aplicable only when ordered together with the oil cooler.
DEL Note€/kg€/kg
9.82Sobrecarga Surcharge Cu/Ni 13.75
7.72 8.07 8.42 8.77 9.12 9.47Sobrecarga Surcharge Cu610-629
5.96 6.32 6.67 7.02 7.37590-609490-509 510-529 530-549 550-569470-489 570-589
Aplic
ação
Apl
icat
ion
Semi-hermético e Aberto
Semi-hermetic and Open drive
HFC / R22
NH3AbertoOpen drive
-
EUR
Extra
s (A)
Extra
s (A)
8.35
Tipo d
e co
mpre
ssor
Comp
ress
or ty
pe
10.819.82 10.328.84 9.33
EXTENT OF DELIVERY: OIL COOLER (OW), WATER-COOLED (HFC & R22)
FORNECIMENTO BASE: ARREF. ÓLEO (OW..A), ARREF. A ÁGUA (NH3) EXTENT OF DELIVERY: OIL COOLER (OW..A), WATER-COOLED (NH3)
FORNECIMENTO BASE: ARREF. ÓLEO (OL), ARREF. A AR EXTENT OF DELIVERY: OIL COOLER (OL), AIR-COOLED
SOBRECARGA COBRE/CUPRONÍQUEL COPPER/Cu-Ni SURCHARGE
650-669 670-689
Refrig
eran
te (a
plica
ção)
Refrig
eran
t (a
plica
tion)
SH e AbertoSH and Open drive
-
-
HFC / R22 --
Arrefecedor de óleo a água Oil Cooler, water cooled
Arrefecedor de óleo a ar Oil Cooler, air cooled32.0 -
5.5
-
dm3
10.5 11.2
14.0
10.5
--
10.0(1)
11.214.0 15.014.0
-9.5
OW290ACOW160AC
-
-
-
-
Óleo especial para compressores de parafuso Special Screw compressor oil-
--
9.5 -11.5
--R22 20.0 --R22
Volum
e de ó
leoOi
l volu
me
Peso
de C
obre
/Cup
roníq
uel
Copp
er/C
u-Ni
Weig
ht
Kg
8.0 13.2
-
28.524.0
11.5 -
HFC10.020.0
HFC --
32.0
10.5
19.9
26
B320SHB150SH
TGC 2012/0
20.0 ---
(2)
13.2612.7712.28
630-649
11.30 11.79
690-709
Carga Cobre/Cuproníquel: Para produtos que contenham Cu ou Cu-Ni é aplicada uma mais valia, valida na data de compra.Este valor é líquido de acordo com a tabela seguinte.
Copper/Copper-Ni surcharge: For products containing Cu or Cu-Ni a surcharge applies, valid on the date of purchase.This surcharge is net (according to DEL Note) as per the following table and is not subject to discount.
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
OL600OL300
R22
-
-
BSE170
B100BSE170L
OW860AC
FORNECIMENTO BASE: ARREF. ÓLEO (OW), ARREF. A ÁGUA (HFC & R22)
OL200
-
--
-
- -
-OW290AOW160A
OW860A
OW941B 28.5OW941 24.0
18.0 21.3
OW501
OW781BOW781
COMPRESSORES COMPRESSORSParafuso - Acessórios Screw - Acessories
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
ice
Arre
feced
or ól
eo(lig
açõe
s stan
dard
)Oi
l coo
ler (s
tanda
rd
conn
ectio
ns)
GRUPOS CONDENSING UNITS
EUR
18.0 21.3
Água
do m
ar
(apli
caçã
o)Se
awate
r (a
plica
tion)
OW401B-
OW501B-
15.0
Tamp
os pr
otegid
os
por p
lástic
oPl
astic
coate
d co
vers
OW401
Separador de óleo com controle de nível de óleo com visor, indicador mínimo de nível Oil separator with oil level control by means of sight glass, electronic minimumelectrónico com flanges, resistência aquecimento óleo, termostato óleo, ligação para level indicator incl. fixing flange, oil heater (1), oil thermostat (1), connection for pressure relief vaválvula segurança, carga óleo e ligação de purga, ligação de entrada e saída de gás. oil outlet connection, oil charge & drain connection, gas inlet and outlet connection.
(1) Tensão nominal standard 230V/1/50&60Hz (1) Standard voltage 230V/1/50&60Hz(2) OAF: Para controlo do retorno de óleo (2) OAF: For controlled oil return to compressor(3) OAC14011A: Kit inclui 8 elementos de filtragem (3) OAC14011A: Kit includes 8 filter elements
OAC25112A: Kit inclui 12 elementos de filtragem OAC25112A: Kit includes 12 filter elements(4) Rosca exterior G1/2" (4) External thread G1/2"
alternativa: rosca exterior 1/2"-14 NPTF Altern.: external thread 1/2"–14 NPTF(5) Rosca interior G1/2" (5) Internal thread G1/2"
alternativa: rosca interior 1/2"-14 NPTF Altern.: internal thread 1/2"–14 NPTF
(A) Preços aplicáveis somente quando encomendados juntamente com o separador de óleo(A) Prices aplicable only when ordered together with the oil separator.
FORNECIMENTO BASE: SEPARADOR DE ÓLEO EXTENT OF DELIVERY: OIL SEPARATOR
OA9111A
OAS744
-
-
OAC25112A NH3AbertoSeparador de óleo (NH3) com elementos de filtragem integrados Oil Separator (NH3) with integrated filter elements
- Open drive
1.5OAS3088
AbertoOpen drive
OAC14011A 140
-- 1.0
Aplic
ação
Apl
icat
ion
Volum
e de ó
leoOi
l volu
me
dm3
Válvu
la de
corte
(sa
ída re
frig.)
Shut-
off va
lve
(disc
harg
e outl
et)Vá
lvula
de co
rte
(saída
óleo
)Sh
ut-off
valve
(oil
outle
t)
max. 12.0
Kit d
e filtr
o (3)
Spar
e filte
r kit (
3)
HFC / R22Semi-hermético
Raco
rd pa
ra
válvu
la de
se
gura
nça (
4)Ad
apter
for R
elief
Valve
(4)
OA25112A 250
NH3AbertoOpen driveOA14111A 140
TGC 2012/0 27
Mode
loTy
pe
Preç
oPr
ice
Sepa
rado
r de ó
leo(lig
açõe
s stan
dard
)Oi
l Sep
arato
r (st
anda
rd
conn
ectio
ns)
Tipo d
e co
mpre
ssor
Comp
ress
or ty
pe-
OA9111
-
OA1411190
OA1954 18OA4188
Semi-hermético e Aberto
Semi-hermetic and Open drive
HFC / R2240
-
-
Contr
olado
r de n
ível
de ól
eo op
to-ele
ctrón
ico O
LC-D
1 (1
)(2)
Opto-
electr
onic
oil
level
EURSeparador de óleo para aplicações standard Oil Separator for standard aplications
Refrig
eran
te (a
plica
ção)
Refrig
eran
t (a
plica
tion)
EUR
Raco
rd pa
ra
válvu
la de
se
gura
nça (
5)Ad
apter
for R
elief
Valve
(5)
-----
--
OAS1655OAS1055
OAS322
OAF6288 -
---
-
-
--
OA4188AOA1954A
OAF15211Separador de óleo para NH3 Oil Separator for NH3
-
-
-
-
-
--
-
---
COMP
RESS
ORES
C
OMPR
ESSO
RS
0.7--
0.4
Extra
s (A)
Extra
s (A)
40
250
-
max. 32.0
Separador de óleo secundário para sistemas inundados (Modelos CSH/CSW) Secondary oil separator for flooded evaporator systems (CSH/CSW Series) OA25112
--
--
--
-
- -
--
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
GRUP
OS
CON
DENS
ING
UNIT
S
HFC / R22
90
---
140
18
Semi-hermetic
1.0
Separador de óleo secundário Secondary oil separator
250
Depósito com carga de protecção, entrada: com ponta soldar ou flange com ligação Pressure vessel with protective charge, inlet: Rotalock connection with solder bushing or flangesoldar, saída de líquido: válvula rotalock com ligação soldar, ligação para válvula with solder bushing, liquid outlet: shut-off valve with solder bushing, connection for pressurede segurança 1 1/4"-12UNF // 3/8"-18NPTF. relief valve 1 1/4"-12UNF // 3/8"-18NPTF. F062H..F192T: 1 visor com indicador de nível do F202H ao F3102N: 2 visores F062H to F192T: 1x sight glass with level indicator, F202H to F3102N, F302G to F1602G,F202H ao F3102N: 2 visores com indicador de nível. F302K to F1602K: 2x sight glassesCertificação de acordo com Directiva de equipamentos sob pressão (PED) 97/23/EC, F062H to F3102N, F302G to F1602G, F302K to F1602K: angle brackets below, with suffix "H"outras certificações sob pedido. also above.
Approval according to the EC Pressure Equipment Directive (PED) 97/23/EC, other approvalson request
Depósito com carga de protecção, Extent of delivery: Pressure vessel with protective charge, Entrada: casquilho Inlet: welded nut or Rotalock connection with solder bushing, Saída FS36 .. FS 126: válvula de corte com adaptador soldar Liquid outlet FS36..FS126: rotalock connection with nut (shut-off valve as option),Saída FS102 .. FS 5502: válvula de corte com adaptador soldar Liquid outlet FS102..FS5502: shut-off valve with solder bushing, or flange with solder bushing,FS102..FS152: ligação para válvula segurança 1 1/4"-12UNF // 3/8"-18NPTF, FS102..FS152: connection for pressure relief valve 1 1/4"-12UNF // 3/8"-18NPTF, FS202..FS5502: ligação para válvula segurança 1 1/4"-12UNF. FS202..FS5502: connection for pressure relief valve 1 1/4"-12UNF. Certificação de acordo com Directiva de equipamentos sob pressão (PED) 97/23/EC, Fixing: FS36 central stud below, FS56..FS5502 fixing feet below. Approval according to theoutras certificações sob pedido. EC Pressure Equipment Directive (PED) 97/23/EC, other approvals on request.
DEPÓSITOS LÍQUIDO LIQUID RECEIVERSHorizontais e Verticais Horizontal and Vertical
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
ice
Depó
sito
(ligaç
ões s
tanda
rd)
Rece
iver (
stand
ard
conn
ectio
ns)
Depósitos verticais Vertical receivers
F062H
F152H
GRUPOS CONDENSING UNITS
EURDepósitos horizontais Horizontal receivers
F202HF192T
F102H
7/8"/22LF252H 1.1/8"/28L
-1.5/8"/42L1.5/8"/42L
7/8"/22L7/8"/ 22L
1.1/8"/28LF392T 7/8"/ 22L -F302H 1.1/8"/28L
1.3/8"/35L
1/2"/12L5/8"/16L7/8"/22L
FS2202FS1602 2.1/8"/54L -
FS252
F732N
F552TF402H
F562N
1.5/8"/42LF902N -
F3102N 3.1/8"/76L
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
F2202N 3.1/8"/76L
FS4002FS3102
FS1122
FS102
FS902
FS36 (7)
-
28
7/8"/22L5/8"/16L
-
Stan
dard
(8)
Stan
dard
(8)
7/8"/22L
F1052T -
FS1527/8"/22L
F1602NF1202N
FS126 (7) - -
Alar
gada
Enlar
ged
Stan
dard
Stan
dard
5/8"/16L7/8"/ 22L
TGC 2012/0
7/8"/ 22L
FS562FS402FS302
-
7/8"/22LFS202
1.3/8"/35L 1.5/8"/42L 1.5/8"/42L
-
1.3/8"/35L1.3/8"/35L
1.1/8"/28L
FS76 (7)FS56 (7) -
Extra
s (A)
Extra
s (A)
Viso
r (nív
el mí
n.)Si
ght g
lass
(min.
leve
l)
Viso
r (nív
el me
d.)Si
ght g
lass
(med
. leve
l)
Viso
r (nív
el má
x.)Si
ght g
lass
(max
. leve
l)
EUR
Mais
valia
Adici
onal
char
ge
Mais
valia
Adici
onal
char
ge
Alar
gada
Enlar
ged
Ligações saídaOutlet connections
Válvu
la co
rte
(5)
Shut-
off va
lve
(5)
Mais
valia
Adici
onal
char
ge
Mais
valia
Adici
onal
char
ge
FS5502FS4752
FS732
2.1/8"/54L2.1/8"/54L
3/8"/10L 3/8"/10L 1/2"/12L1/2"/12L5/8"/16L7/8"/22L
1.1/8"/28L1.1/8"/28L1.3/8"/35L1.3/8"/35L1.5/8"/42L2.1/8"/54L
3.1/8"/76L3.1/8"/76L
4.1/4"/108L4.1/4"/108L4.1/4"/108L
5/8"/16L7/8"/22L
1.1/8"/28L7/8"/22L
1.1/8"/28L
- - -
-
7/8"/22L -
1.1/8"/28L1.1/8"/28L1.3/8"/35L1.3/8"/35L1.5/8"/42L1.5/8"/42L
- -
- - - - -
-
---
-
-
-
-
-
-
-
-----
5/8"/16L7/8"/22L7/8"/22L7/8"/22L7/8"/22L
7/8"/22L1.1/8"/28L1.1/8"/28L1.3/8"/35L1.3/8"/35L1.5/8"/42L
2.1/8"/54L3.1/8"/76L
2.1/8"/54L
3.1/8"/76L
-
- -
7/8"/22L7/8"/22L
-
1.1/8"/28L1.1/8"/28L1.1/8"/28L1.1/8"/28L1.3/8"/35L1.3/8"/35L1.5/8"/42L2.1/8"/54L
3.1/8"/76L3.1/8"/76L
4.1/4"/108L4.1/4"/108L
2.1/8"/54L
4.1/4"/108L
----
3/8"/10L1/2"/12L5/8"/16L5/8"/16L7/8"/22L7/8"/22L7/8"/22L7/8"/22L
1.1/8"/28L1.1/8"/28L1.1/8"/28L1.1/8"/28L1.3/8"/35L1.3/8"/35L1.5/8"/42L1.5/8"/42L2.1/8"/54L2.1/8"/54L
3/8"/10L 3/8"/10L 1/2"/12L1/2"/12L1/2"/12L
7/8"/22L7/8"/22L
1.1/8"/28L1.1/8"/28L1.3/8"/35L1.5/8"/42L1.5/8"/42L2.1/8"/54L2.1/8"/54L3.1/8"/76L3.1/8"/76L3.1/8"/76L
-5/8"/16L
- - - - - -
1.3/8"/35L1.3/8"/35L1.3/8"/35L1.3/8"/35L
- - - - - -
- -
5/8"/16L5/8"/16L5/8"/16L
- - - - -
1.3/8"/35L1.3/8"/35L
- - - - - - - -
-
------
------
--
-----
--------
-----------------
--
------
-
----
-
------
- - - - - - -
-
------------------
-
FORNECIMENTO BASE - DEPÓSITOS DE LÍQUIDO HORIZONTAIS
FORNECIMENTO BASE - DEPÓSITOS DE LÍQUIDO VERTICAIS EXTENT OF DELIVERY - VERTICAL LIQUID RECEIVERS
EXTENT OF DELIVERY - HORIZONTAL LIQUID RECEIVERS
Ligações entradaInlet connections
-
(1) Adaptador para válvula segurança – rosca exterior G1/2" (1) Adapter for pressure relief valve – external thread G1/2" Adaptador para válvula segurança – rosca exterior 1/2"-14NPTF Adapter for pressure relief valve – external thread 1/2"-14NPTF
(2) Adaptador para válvula segurança – rosca interior G1/2" (2) Adapter for pressure relief valve – internal thread G1/2" Adaptador para válvula segurança – rosca interior 1/2"-14NPTF Adapter for pressure relief valve – internal thread 1/2"-14NPTF
(3) Para montar no visor existente (3) For mounting in existing sight glass(4) Tensão nominal standard 230V/1/50&60Hz (4) Standard voltage 230V/1/50&60Hz(5) Depósito com válvula de corte em abos os lados requer uma válvula (5) Receiver with shut-off valves on both sides require a relief valve
de segurança (6) F302K..F1602K: 2x inlet connections, 1x connection with solder bushing not(6) F302K..F1602K: 2x ligações de entrada, 1x ligação soldada não mounted - second as accessory
montada - segunda como opção (7) F732N, F902N: Fixing rails (above) and fixing plate for compressor mounting(7) F732N, F902N: Suportes de fixação (superiores) e placa de fixação require additional angle brackets
para montagem do compressor requerem suportes em ângulo adicionais (8) FS36..FS126: Shut-off valve as option (not mounted)(8) FS36..FS126: Válvula de corte como opção (não montada) FS102..FS5502: Shut-off valve as standard (mounted)
FS102..FS5502: Válvula de corte como standard (montada) (9) FS36: Accessory set includes 1 sight glass (low level)(9) FS36: O set de acessórios inclui 1 visor (nível mínimo) FS56..FS126: Accessory set includes 2 sight glasses and
FS56..FS126: O set de acessórios inclui 2 visores e ligação para válvula connection for relief valve (1 1/4"-12UNF // 3/8"-18NPTF)de segurança (1 1/4"-12UNF // 3/8"-18NPTF) (10) Maximum level control also available on request for vertical receivers
(10) Controlo de nível máximo também disponível sob pedido para depósitos verticais
(A) Preços aplicáveis somente quando encomendados juntamente com o depósito.(A) Prices aplicable only when ordered together with the receiver.
2 sup
ortes
de fix
ação
(su
perio
res)
2 fixi
ng ra
ils (a
bove
)
4 sup
ortes
de fix
ação
(su
perio
res)
4 fixi
ng ra
ils (a
bove
)
Ver li
stage
m de
extra
s do c
ompr
esso
rSe
e com
pres
sor's
spar
e par
ts lis
tVe
r lista
gem
de ex
tras d
o com
pres
sor
See c
ompr
esso
r's sp
are p
arts
list
GRUP
OS
CON
DENS
ING
UNIT
S
Contr
olo de
níve
l ele
ctrón
icoEl
ectro
nic le
vel c
ontro
l
Supo
rtes e
m ân
gulo
Angle
brac
kets
Plac
a de f
ixaçã
o (7)
Fixing
plate
(7)
Contr
olo de
níve
l mí
nimo (
3)(1
0)Mi
nimum
leve
l con
trol
(3)(1
0)Di
spos
itivo d
e pr
otecç
ão S
E-B2
(4)
SE-B
2 P
rotec
tion d
evice
(4) CO
MPRE
SSOR
ES
COM
PRES
SORS
Mode
loTy
pe
-- F062H
Extra
s (A)
Extra
s (A)
- --
F392T-F402H-
-- F552T
-- -
F102HF152H
F302H-
- - -
-
--
F192T--
----- -
- F202H- -
-- -
- --- F252H
--
- - --
- - - --
F562N- -
--- - - -
--
-- F732N
- F902N--
- ---
- -- - F1602N
- - --
- -
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
FS36 (7)
--
-FS56 (7)FS76 (7)FS126 (7)
FS202
- -- -- - - - -- -
-- -- -
- - - - --
-- - -- - - - - -- -
- FS102- - - - -- - - - - -
FS152- - - -
FS252Sob pedido
Under request- - - -
-
- - - -- - - -
- - --
FS402
- - - ---
- - - FS562-
Sob pedido Under reques
- - - -- - - -
Sob pedido Under
- - - -FS3102
- - - - FS5502FS4752FS4002
- - - -
FS902
FS2202FS1602
FS732
FS302
-
--
-- -
F1052TF1202N
-
-
- - ---
------
-
-----
TGC 2012/0 29
--------
-- - - -
FS1122-
-- F3102N-
F2202N--- - - -
---
-
- -- - -
2 sup
ortes
de fix
ação
(in
ferior
es) (
7)2 f
ixing
rails
(belo
w)
(7)
Disp
ositiv
o de
monit
oriza
ção
Monit
oring
devic
e
Ligaç
ão pa
ra vá
lvula
segu
ranç
aCo
nnec
tion f
or
pres
sure
relie
f valv
eRa
cord
para
válvu
la de
segu
ranç
a (1)
Adap
ter fo
r Reli
ef Va
lve (1
)
EUR
Contr
olo ní
vel o
pto-
electr
ónico
OLC
-D1
(3)
OLC-
D1-D
– Op
to-ele
ctron
ic
liquid
leve
l mon
itorin
g
Raco
rd pa
ra vá
lvula
de se
gura
nça (
2)Ad
apter
for R
elief
Valve
(2)
Horizontais Horizontal
Verticais Vertical
FORNECIMENTO BASE EXTENT OF DELIVERYCarga de protecção, ligações de entrada: ligação rotalock com ponta de soldar, ou Shell and tube condensers with fin tubes, protective charge, inlet: Rotalock connection withflange com ponta de soldar, ligações de saída: válvula rotalock com ponta de soldar solder bushing, or flange with solder bushing; liquid outlet: shut-off valve with solder bushing,soldar, K123HB ..K 4803TB com 2ª ligação de saída para água do mar (válvula de K123HB..K4803TB with second liquid outlet for marine application (shut-off valve optional),corte opcional), ligação para válvula de segurança 1 1/4"-12UNF // 3/8"-18NPTF, connection for pressure relief valve 1 1/4"-12UNF // 3/8"-18NPTF, angle brackets below,suportes de fixação inferiores, suportes fixação superiores com sufixo H(B) e T(B), angle brackets – also above with the suffix "H(B)" and "T(B)", approval according to the certificação de acordo com Directiva de Equipamentos sob Pressão (PED) 97/23/EC, EC Pressure Equipment Directive (PED) 97/23/EC, other approvals on request. outras certificações sob pedido.
Nota! K033N(B)..K373H(B): Ligação água comutável para 2 ou 4 passes. Note! K033N(B)..K373H(B): water connections are suitable for 2 and 4 pass operation,Acima do tipo K573H(B) o número de passes (2 ou 4) deve ser referido na encomenda. from K573H(B): number of water passes (2 or 4) must be stated when ordering.
(A) Preços aplicáveis somente quando encomendados juntamente com o condensador.(A) Prices aplicable only when ordered together with the condenser.
2x F
lange
s pa
ra so
ldar (
3)2x
Cou
nter
flang
es (3
)
Mais
valia
Adici
onal
char
ge
Ligações águaWater connections
EUR
- -
- - - -
3.1/8"/76L - -3.1/8"/76L - -
-1.3/8"/35L - -1.5/8"/42L - -
- - - - - -
1.1/8"/28L 1.3/8"/35L
5/8"/16L - -7/8"/22L - - 7/8"/22L - -
- -
-
3 1/8"/76L
1.3/8"/35L1.1/8"/28L 1.3/8"/35L1.3/8"/35L - -
3/8"/10L - -1/2"/12L 5/8"/16L
-3.1/8"/76L - -
Protecção água do mar Seawater resistant3/8"/10L - -
30 TGC 2012/0
Ligações entradaInlet connections
Ligações saídaOutlet connections
3/8"/10L - -
2 1/8"/54L2.1/8"/54L
Extra
s (A)
Extra
s (A)
K4803TB 3.1/8"/76L - -
NW 65K3803TB 3.1/8"/76L - -K2923TBK1973TB 2.1/8"/54L
3 1/8"/76L NW100 (4)NW80 (4)
- -1 5/8"/42L NW 65
2.1/8"/54L - - - -
- - - -
- -K1353TB 1.5/8"/42L - -K1053HB
- - 1.5/8"/42L - -
1 3/8"/35L
1.1/8"/28L 1.3/8"/35L - -1 1/8"/28L1 1/8"/28L
1 1/8"/28L1 3/8"/35L1.3/8"/35L -
7/8"/22L - - -
7/8"/22L7/8"/22L
K203HB 5/8"/16L 7/8"/22LK123HB 5/8"/16L - - - -K073HB 1/2"/12L 5/8"/16L
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
K283HB 7/8"/22L 1.1/8"/28L
K573HB 1.3/8"/35L - -K373HB 1.1/8"/28L 1.3/8"/35L
K813HB 1.3/8"/35L
3 1/8"/76L NW100 (4)K4803T
K033NB 1/2"/12L
3.1/8"/76L - - 3.1/8"/76L - -
-5/8"/16L -
K3803T 3.1/8"/76L - -2 1/8"/54L NW 65K2923T 2.1/8"/54L - - 2.1/8"/54L -
-
NW 65-
-
3 1/8"/76L NW80 (4)
1 3/8"/35L - -
1 5/8"/42L
- - - -
- -
1.3/8"/35L - - - -
-7/8"/22L
K1973T 2.1/8"/54L - -1 3/8"/35L -K1353T 1.5/8"/42L - - 1.3/8"/35L - -
1.5/8"/42L
-1.3/8"/35L
7/8"/22L - - -
-K1053H 1.5/8"/42L
-1.1/8"/28L - - -
K813H 1.3/8"/35L - ---
K573H
-- -
-K283H 7/8"/22L 1.1/8"/28L
-K203H 5/8"/16L 7/8"/22L
K373H 1.1/8"/28L
5/8"/16L - - - -
- --
K123H 5/8"/16L - - - - -3/8"/10L - -
1/2"/12L - -5/8"/16L - -
- - -K073H 1/2"/12L 5/8"/16L
- -
CONDENSADORES MULTITUBULARES ARREFECIDOS A ÁGUAWATER-COOLED SHELL & TUBE CONDENSER
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
ice
Cond
ensa
dor
(ligaç
ões s
tanda
rd)
Cond
ense
r (st
anda
rd
conn
ectio
ns)
Válvu
la co
rteSh
ut-off
valve
Mais
valia
Adici
onal
char
ge
GRUPOS CONDENSING UNITS
EURStandard StandardK033N 1/2"/12L 5/8"/16L
Stan
dard
Stan
dard
Alar
gada
Enlar
ged
Mais
valia
Adici
onal
char
ge
Stan
dard
Stan
dard
Alar
gada
Enlar
ged
Mais
valia
Adici
onal
char
ge
2ª S
aída (
5)2n
d Outl
et (5
)
(1) Adaptador para válvula segurança – rosca exterior G1/2" (1) Adapter for pressure relief valve – external thread G1/2"Adaptador para válvula segurança – rosca exterior 1/2"-14NPTF Adapter for pressure relief valve – external thread 1/2"-14NPTF
(2) Adaptador para válvula segurança – rosca interior G1/2" (2) Adapter for pressure relief valve – internal thread G1/2"Adaptador para válvula segurança – rosca interior 1/2"-14NPTF Adapter for pressure relief valve – internal thread 1/2"-14NPTF
(3) Fornecimento standard: Flanges aço soldadas DIN 2633 (3) Standard design: steel welding flanges DIN 2633 Fornecimento protecção água do mar: Flanges aparafusadas de bronze DIN 2566 Seawater-resistant design: red-bronze screwed flanges DIN 2566
(4) NW80: versão de 4 passes / NW100: versão de 2 passes (4) NW80: 4-Pass version / NW100: 2-Pass version (5) K1053H inclui suportes de fixação adicionais (inferiores) (5) K1053H including additional rails (below)
DEL Note€/kg€/kg
K3803TBS -
TGC 2012/0 31
K4803TB- 96.40
123.39
670-689470-489 490-509 510-529 530-549 550-5698.42
570-589 590-609 610-629 630-649
K1973TBS - K2923TB
K1053HBS - K1353TBS - 29.99
34.70S - 50.13
K573HBS - K813HBS - 14.87
18.93
K283HBS - K373HB10.18S - 6.14
K073HBK123HB
S - K203HB
- 2.08S - 3.07
4.61
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
K4803TK3803T GR
UPOS
C
ONDE
NSIN
G UN
ITS
Standard Standard
- -S
K1353TK1973TK2923T
K203HK283HK373HK573HK813HK1053H
-
K033NK073H
3.07 - K123H2.08 -
--
COMP
RESS
ORES
C
OMPR
ESSO
RS
Mode
loTy
pe
-Ra
cord
para
válvu
la de
segu
ranç
a (1)
Adap
ter fo
r Reli
ef Va
lve (1
)
Raco
rd pa
ra vá
lvula
de se
gura
nça (
2)Ad
apter
for R
elief
Valve
(2)
1.04 -
2 sup
ortes
de fix
ação
(in
ferior
es)
2 fixi
ng ra
ils (b
elow)
2 sup
ortes
de fix
ação
(su
perio
res)
2 fixi
ng ra
ils (a
bove
)
Plac
a de f
ixaçã
oFix
ing pl
ate
Estru
tura p
ara
comp
ress
or T
ande
mFr
ame f
or T
ande
m co
mpre
ssor
Tamp
os pr
otegid
os
com
plásti
coPl
astic
coa
ted co
vers
- - --
---
--------
14.87 -18.93 -
4.61 -6.14 -
10.18 -
96.40 -
29.99 -34.70 -50.13 -
Peso
de C
obre
Sobr
etaxa
ver t
abela
abaix
oCo
pper
weig
htSu
rchar
ge se
e tab
le be
low
Peso
de C
upro
níque
lSo
breta
xa ve
r tab
ela ab
aixo
Cu-N
i weig
htSu
rchar
ge se
e tab
le be
low
Kg
73.26S
123.39 -
S - 1.04Protecção água do mar Seawater resistant
- K033NB
73.26 -
5.96 6.32 6.67 7.02 7.37 7.72 8.07
EUR
Extra
s (A)
Extra
s (A)
Carga Cobre/Cuproníquel: Para produtos que contenham Cu ou Cu-Ni é aplicada uma mais valia, valida na data de compra.Este valor é líquido de acordo com a tabela seguinte.
Copper/Copper-Ni surcharge: For products containing Cu or Cu-Ni a surcharge applies, valid on the date of purchase.This surcharge is net (according to DEL Note) as per the following table and is not subject to discount.
13.7510.819.82
8.35 8.84 9.33 11.30 11.799.12 9.47Sobrecarga Surcharge Cu
Sobrecarga Surcharge Cu/Ni 9.82 10.32 12.28 12.77
650-669
13.268.77
690-709
Válvula de aspiração e descarga, motor eléctrico 230-400V/3/50<>275-460V/3/60 Suction and discharge valve sweat connection, electrical motorcom protecção (sensor PTC), módulo de controlo T00ECA01 (monitorização 230-400V/3/50<>275-460V/3/60 with protection (ptc sensor), controlde temperatura), caixa de ligações classe de protecção IP56, carga de óleo module T00ECA01 (winding temperature monitoring), electrical terminal box IP56,ester, apoios anti-vibráticos, carga de nitrogéneo (1 bar) POE oil charge, rubber vibration absorber, nitrogen charge (1 bar)
(A) Preços aplicáveis somente quando encomendados juntamente com o compressor.(A) Prices aplicable only when ordered together with the compressor.
Extra
s (A)
Extra
s (A)
Resis
tência
de ca
rter
(3)
Cran
kcas
e hea
ter (3
)
Extra
para
resis
tência
ca
rter p
ara v
oltag
em
espe
cial
Surch
arge
for
crank
case
heate
r for
sp
ecial
volta
ge
Contr
olado
r níve
l óleo
ele
ctrón
ico (7
)El
ectro
nic oi
l leve
l co
ntrol
(7)
EUR
Motor
para
volta
gem
espe
cial (T
rifásic
o) (2
)Mo
tor fo
r Spe
cial
Volta
ge (3
Pha
se) (
2)
Motor
para
volta
gem
espe
cial (M
onofá
sico)
(4
)Mo
tor fo
r Spe
cial
Volta
ge(1
Pha
se/50
Hz) (
4)
Prote
cção
de m
otor
para
volta
gem
espe
cial
Contr
ol un
it for
spec
ial
volta
ge
Q7-36.1Y -Q5-36.1Y -Q7-33.1Y -Q5-33.1Y -Q7-28.1Y -Q5-28.1Y -Q7-25.1Y -
-
Q5-25.1Y -Q4-25.1Y -Q5-24.1Y -
-
32 TGC 2012/0
Q5-21.1YQ4-21.1Y
-Q4-24.1Y
Q4-20.1Y -
F5-24.1Y -F4-24.1Y -F5-19.1Y -
-F4-19.1Y -F4-16.1Y
D4-19.1Y -D3-19.1YD4-18.1Y -D3-18.1YD4-16.1Y -
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
D3-16.1YD3-15.1YD2-15.1YD3-13.1YD2-13.1YD2-11.1Y
C3-12YC2-12Y
B2-10.1YB1.5-10.1Y
A1.5-7YA1-7Y
A0.7-6Y
FORNECIMENTO BASE EXTENT OF DELIVERY
A1-6Y
B1.5-9.1Y
A1.5-8Y
COMPRESSORES COMPRESSORSRecíprocos Semi-herméticos Semi-hermetic Reciprocating
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
iceCo
mpre
ssor
(1)
Comp
ress
or (1
)
GRUPOS CONDENSING UNITS
EUR
Regu
lador
de ní
vel d
e óle
o elec
trónic
o (7)
Elec
tronic
oil le
vel
regu
lator
(7)
A0.7-5YA0.5-5YA0.5-4Y
(1) Compressor com ligação DOL 230-400V/3/50Hz<>275-460V/3/60Hz ou (1) Compressor with DOL connections 230-400V/3/50Hz<>275-460V/3/60Hz(DOL) 230-400V/3/60Hz or 230-400V/3/60Hz
(2) Ampla gama de motores para diferentes tensões (2) Wide range of motors for different voltages(3) Tensão nominal standard 230V/1/50&60Hz (3) Standard voltage 230V/1/50&60Hz(4) Completo com caixa monofásica com relé, condensador de arranque e (4) Completed with single phase box including relay, start capacitor and run capacitor
condensador de funcionamento (5) T00SK170200 connection 15,8mm / T00SK170300 connection 28,6mm(5) T00SK170200 ligação de 15,8mm / T00SK170300 ligação de 28,6mm (6) PTC sensor controlled by T00ECA01(6) Sensor PTC controlado por T00ECA01 (7) Not mounted(7) Não montado
Q7-33.1Y
Q5-28.1YQ7-28.1YQ5-33.1Y
- - -
Q7-36.1YQ5-36.1Y
Extra
s (A)
Extra
s (A)
-
32.6628.0228.02
Q5-25.1YQ7-25.1Y
24.6924.69
Q5-24.1Y
79
Q4-25.1Y
Q4-24.1Y
24.69
79
TGC 2012/0 33
79
7977
Q5-21.1Y
79
7979
79
79797932.66
35.8635.86
23.91
Q4-20.1Y74Q4-21.1Y21.18 79
19.77
F4-24.1Y- - F5-24.1Y- - 74
76
F4-19.1Y- - F5-19.1Y- -
7619.12
D4-19.1Y
- - F4-16.1Y
- - - - 51
D4-18.1Y- - - - D3-19.1Y- - - -
19.12 4951
D4-16.1Y- - - - D3-18.1Y
16.4017.93
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
- - - -
D3-15.1Y- - - -
D2-15.1Y
D3-16.1Y
15.3615.36
- - - -
D2-13.1Y- - - - D3-13.1Y- - - - 45
C3-12Y
- - - - D2-11.1Y
- - - - 40
45
B2-10.1Y
- - - - C2-12Y
- - - -
40
B1.5-9.1Y- - - - B1.5-10.1Y- - - - 8.96
9.883838
A1.5-7Y- - - - A1.5-8Y- - - - 36
7.65
A1-6Y- - - -
-
A1-7Y- - - -
A0.5-5Y- - - -
A0.7-6Y-
- -
Sens
or de
gás q
uente
(6
)Di
scha
rge
tempe
ratur
e sen
sor
(6)
Bobin
a volt
agem
es
pecia
l par
a SU
/ CR
Spec
ial V
oltag
e Coil
for S
U / C
R
- -
Arra
nque
em va
zio
(sem
válvu
la de
re
tençã
o) (3
)St
art u
nload
er (w
/o ch
eck v
alve)
(3)
Venti
lação
adici
onal
(3)(7
)Ad
icion
al Fa
n (3)
(7)
-
-
-- A0.5-4Y
EUR-
1x C
ontro
lo de
Ca
pacid
ade
1x C
apac
ity C
ontro
l
36
Volum
e des
locad
o (50
Hz)
Disp
lacem
ent (
50Hz
)
Peso
Weig
ht
m3/h
COMP
RESS
ORES
C
OMPR
ESSO
RS
Mode
loTy
pe
-
GRUP
OS
CON
DENS
ING
UNIT
S
A0.7-5Y
Flang
e par
a eq
ualiz
ação
de ól
eoCo
nnec
tion f
or oi
l eq
ualiz
ation
40
3636363636
23.91
7474
494549495149
Kg
21.18
23.6023.60
9.88
6.91
16.4019.12
13.15
3.954.934.935.475.476.91
36
16.40
17.93
19.12
12.0512.05
11.2613.15
Válvula de aspiração e descarga, motor eléctrico 400V/3/50<>460V/3/60 Suction and discharge valve sweat connection, electrical motorcom protecção (sensor PTC), módulo de controlo T00ECA01 (monitorização 400V/3/50<>460V/3/60 with protection (ptc sensor), control module T00ECA01 de temperatura), caixa de ligações classe de protecção (S: IP56, V..W: IP64), (winding temperature monitoring), electrical terminal box (S: IP56, V..W: IP64),sensor de gás quente (somente nos modelos V, Z, W), pressostato diferencial discharge temperature sensor (only on models V, Z, W), Oil pressure switch Delta-Pde óleo electrónico Delta-P (somente nos modelos V, Z, W), carga de óleo (only on models V, Z, W), POE oil charge, rubber vibration absorber, nitrogenester, apoios anti-vibráticos, carga de nitrogéneo (1 bar) charge (1 bar)
(A) Preços aplicáveis somente quando encomendados juntamente com o compressor.(A) Prices aplicable only when ordered together with the compressor.
34 TGC 2012/0
W80-240Y -W75-240Y -W75-228Y -W70-228YW70-206Y -
W60-187Y -
W50-168Y -W50-187Y -
-
-Z40-154Y -
-Z40-126YZ30-126Y -
FORNECIMENTO BASE
Z35-106Y -
Z50-154Y
W40-168Y -W40-142Y
W60-206Y -
-DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
Z25-106Y -
V32-93YV25-93Y
-V25-103YV35-103Y -
-
-
V30-84Y -V20-84Y -V25-71Y -V15-71Y -V20-59Y
--
-
S7-39Y
--
S10-51Y -S12-42Y -
-
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
iceCo
mpre
ssor
Comp
ress
or
GRUPOS CONDENSING UNITS
-
Motor
para
volta
gem
espe
cial (T
rifásic
o) (2
)Mo
tor fo
r Spe
cial
Volta
ge (3
Pha
se) (
2)
S8-42Y
COMPRESSORES COMPRESSORSRecíprocos Semi-herméticos Semi-hermetic Reciprocating
Extra
para
resis
tência
ca
rter p
ara v
oltag
em
espe
cial
Surch
arge
for
crank
case
heate
r for
sp
ecial
volta
ge
Contr
olado
r níve
l óleo
ele
ctrón
ico (7
)El
ectro
nic oi
l leve
l co
ntrol
(7)
Motor
para
volta
gem
espe
cial (M
onofá
sico)
(4
)Mo
tor fo
r Spe
cial
Volta
ge(1
Pha
se/50
Hz) (
4)
Prote
cção
de m
otor
para
volta
gem
espe
cial
Contr
ol un
it for
spec
ial
volta
ge-
Resis
tência
de ca
rter
(3)
Cran
kcas
e hea
ter (3
)
Regu
lador
de ní
vel d
e óle
o elec
trónic
o (7)
Elec
tronic
oil le
vel
regu
lator
(7)
Extra
s (A)
Extra
s (A)
EUR
EXTENT OF DELIVERY
EUR
S7-33Y
S10-39Y
S5-33Y -
S10-52Y -S15-52Y
V15-59Y -
S20-56YS15-56Y
(1) Compressor com ligação DOL 230-400V/3/50Hz<>275-460V/3/60Hz ou (1) Compressor with DOL connections 230-400V/3/50Hz<>275-460V/3/60Hz(DOL) 230-400V/3/60Hz or 230-400V/3/60Hz
(2) Ampla gama de motores para diferentes tensões (2) Wide range of motors for different voltages(3) Tensão nominal standard 230V/1/50&60Hz (3) Standard voltage 230V/1/50&60Hz(4) Completo com caixa monofásica com relé, condensador de arranque e (4) Completed with single phase box including relay, start capacitor and run capacitor
condensador de funcionamento (5) T00SK170200 connection 15,8mm / T00SK170300 connection 28,6mm(5) T00SK170200 ligação de 15,8mm / T00SK170300 ligação de 28,6mm (6) PTC sensor controlled by T00ECA01(6) Sensor PTC controlado por T00ECA01 (7) Not mounted(7) Não montado
---------
TGC 2012/0 35
328328
239.02
W70-228Y
W80-240YW75-240Y
W60-206Y320
328328
227.77227.77
W70-206Y328
W75-228Y
W60-187Y315
W40-168YW50-168Y
299305311 W50-187Y
167.60167.60
Z40-154YZ50-154Y
W40-142Y295
154.38
Z30-126Y229240 Z40-126Y125.72
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
Z35-106Y
V32-93Y
Z25-106Y
244
V25-93Y83.8193.05
V20-84Y83.81
V15-71Y70.77
41.32 120S8-42Y
S7-33YS7-39Y38.25
38.25
S5-33Y115117
Peso
Weig
ht
32.8032.80
Volum
e des
locad
o (50
Hz)
Disp
lacem
ent (
50Hz
)
m3/h
Flang
e par
a eq
ualiz
ação
de ól
eoCo
nnec
tion f
or oi
l eq
ualiz
ation
Venti
lação
adici
onal
(3)(7
)Ad
icion
al Fa
n (3)
(7)
Extra
s (A)
Extra
s (A)
Pres
sosta
to dif
eren
cial d
e óleo
ele
ctrón
ico (D
elta-
P)
(3)(7
)El
ectro
nic oi
l pre
ssur
e sw
itch (
Delta
-P) (
3)(7
)
EUR--
GRUP
OS
CON
DENS
ING
UNIT
S
S10-39Y
S10-51Y
S20-56Y
V15-59Y
Mode
loTy
pe
120
130
COMP
RESS
ORES
C
OMPR
ESSO
RS
S12-42Y
S15-56Y
120 S10-52Y126 S15-52Y
V20-59Y
V25-71Y
V30-84Y
Kg
223
240
1x C
ontro
lo de
Ca
pacid
ade
1x C
apac
ity C
ontro
l
Arra
nque
em va
zio
(sem
válvu
la de
re
tençã
o) (3
)St
art u
nload
er (w
/o ch
eck v
alve)
(3)
Sens
or de
gás q
uente
(6
)Di
scha
rge
tempe
ratur
e sen
sor
(6)
Bobin
a volt
agem
es
pecia
l par
a SU
/ CR
Spec
ial V
oltag
e Coil
for S
U / C
R
190192
180187
170174
117120117
132
220
170184
41.32
51.5051.50
93.05102.86
58.4858.48
50.43
70.77
154.38
141.50
239.02
186.10186.10205.80205.80
102.86
125.72
106.16106.16
193
56.0056.00
V35-103Y190 V25-103Y
COMPRESSORES COMPRESSORSGRUPOS
CONDENSING UNITSDEPÓSITOS LÍQUIDO LIQUID RECEIVERS
36 TGC 2012/0
GRUPOSCONDENSING UNITS
51PÁGINASPAGES 38 -
COMP
RESS
ORES
C
OMPR
ESSO
RSGR
UPOS
COND
ENSI
NG U
NITS
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
52
TGC 2012/0 37
PÁGINASPAGES 67-
1020
---
14002000
5
5
7
7
- -
-- -1570
2370 2160
- -
1200
20902800
2040
-
4100 3750
1690
0 -5
1920
- -
- -
4900
- - -
2330 2130
W
-
- --
5780 -
2630 2220 1830
2690
GC 51V1 / 2JC-07.2Y
GC 28V1 / 2JC-07.2Y
GC 54V2 / 2KC-05.2Y
GC 51V1 / 2KC-05.2Y
GC 45V1 / 2KC-05.2Y
Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
-
GC 28V1 / 2KC-05.2Y
GC 91V2 / 2HC-2.2Y
GC 70V2 / 2HC-2.2Y
GC 65V1 / 2HC-2.2Y
GC 54V2 / 2HC-1.2Y
GC 45V1 / 2HC-1.2Y
GC 82V1 / 2GC-2.2Y
GC 54V2 / 2GC-2.2Y
GC 51V1 / 2GC-2.2Y
42
324232
32423242
-
42
42 - - - -32 -
4710 3300 30003970
GC 70V2 / 2JC-07.2Y
32 6360-GC 91V2 / 2GC-2.2Y 3030 -
5430 4570 4190 38002500
42 - - 3590 3280
-
32 6190
32 - - -
1490
990
- 2280 1630
16102240- -
1710 120028202110-
-22102750
2700-
-
1230
- -
-
--
Tipo A1
Tipo B2
Tipo A1
-7.5 -10 -20
1080 740 6301360
-27.5-15
-
1660
- -1940 - - -1580
1220
--
5960
-
1220
-880
-
Tipo d
e bas
eFr
ame t
ype
Tipo A1
Tipo A1
Tipo A1
Tipo B2
Tipo A1
Tipo A1
Tipo B2
Alhe
tas
reve
stida
sCo
ated f
ins
Opçõ
es (A
)Op
tions
(A)
- -
-4390 3680 3360
2970 -24503150 - - - 7
EUR
42 - - - - -
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
3730 -3100 -5300 4480
Linha
líquid
o (3
)(5)
Liquid
line
(3)(5
)
EUR
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el
1750 1220
32423242
3242324232423242
ºC32423242
GRUPOSCONDENSING UNITS
800 530 440-
2070-- 2130 1770 1610 1440
- -1170
-30
Capa
cidad
eR4
04A
Capa
city
R404
A
Temperatura de evaporação [ºC]Evaporation temperature [ºC]
COMPRESSORES COMPRESSORS
Mode
loTy
pe Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
GRUPOSCONDENSING UNITS
5
- - - -dm3
10201870 -
- - - - -1530
3300 2800
3170 2700 2270
2260 1870 1690 1510 -3360 2840
- - - -860- - -
- - 700 6101690
-1390
- - - - -1580
1610 74490 3810 3180 2900
- - 820 700--2620 - -2160 7
1110
3650 3070 2550 2310 2080
8401350 11801900- - - - - 2340
1770- - - --
1420 970-2490
- -
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
5230 4490 3800
3080 2820
3010 27505370 4600
Preç
oPr
ice
4110
Mode
loTy
pe Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)
GC 54V2 / 2KC-05.2Y
2550 -
--3170
15101910264020502680
- - 2490 -3490
3880 3560 3230 -
GC 45V1 / 2KC-05.2YGC 28V1 / 2KC-05.2Y
Ver p
ágina
s 08 -
09Se
e pag
es 08
- 09
GC 51V1 / 2KC-05.2Y
GC 51V1 / 2JC-07.2YGC 28V1 / 2JC-07.2Y
GC 45V1 / 2HC-1.2YGC 70V2 / 2JC-07.2Y
GC 65V1 / 2HC-2.2YGC 54V2 / 2HC-1.2Y
GC 91V2 / 2HC-2.2YGC 70V2 / 2HC-2.2Y
GC 54V2 / 2GC-2.2YGC 51V1 / 2GC-2.2Y
GC 91V2 / 2GC-2.2YGC 82V1 / 2GC-2.2Y
38 TGC 2012/0
Pres
sosta
to BP
LP P
ress
ostat
Pres
sosta
to AP
HP P
ress
ostat
3390
Capo
ta(in
sono
riz. li
geira
)Ho
using
(light
inson
oriz.
)
1060
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
143010501410
-
2180-
Tipo B2
Tipo B2
Tipo A1
Tipo B2
Tipo A1
Tipo B2
5
7
7
7
7
7
7
7
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
GC 82V1 / 2GC-2.2Y
750
640 103
DESENHOS DRAWINGS
GC 91V2 / 2GC-2.2Y
535 730 700
485 930
3/8" 585
Alim
entaç
ãoMP
S
Corre
nteCu
rrent
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
EmmA W
Líquid
oLiq
uidin
96
109930
Kg700
COMP
RESS
ORES
C
OMPR
ESSO
RS
640 91
640 108
640 94
GC 28V1 / 2KC-05.2Y
GC 45V1 / 2KC-05.2Y
GC 51V1 / 2KC-05.2Y
GC 54V2 / 2KC-05.2Y
GC 28V1 / 2JC-07.2Y
GC 51V1 / 2JC-07.2Y
GC 70V2 / 2JC-07.2Y
GC 45V1 / 2HC-1.2Y
730
750
GC 51V1 / 2GC-2.2Y
GC 54V2 / 2GC-2.2Y
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
mm V / F / Hz
GRUP
OSCO
NDEN
SING
UNI
TS
A B C D
750 640 90
87640750
640 87
640 107
640 94
39
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
640 100
640 108
3/8" 485 930
GC 54V2 / 2HC-1.2Y
GC 65V1 / 2HC-2.2Y
GC 70V2 / 2HC-2.2Y
GC 91V2 / 2HC-2.2Y
900 750
110
113
700 750
750
900 750 640
113
485 930
3/8"
3/8" 485
3/8" 485 930
TGC 2012/0
Base Tipo B2 e C2Frame Type B2 and C2
Base Tipo A1 e D1Frame Type A1 and D1
Base Tipo E4 e F4Frame Type E4 and F4
1x315 230/1/50
5/8" 3/8"
1/2"
1/2" 7001x315 230/1/50 0.52
5/8"1020.52
102
4853/8"
5/8" 3/8"
700
485 730
535
900 7502x315 230/1/50 1.04 204 5/8"
1/2"
1/2"
1x350 230/1/50 0.58 130 730
750
3/8" 535 730 700 7501x350 230/1/50 0.58 130 5/8" 1/2"
1/2"1x315 230/1/50 0.52 102 5/8" 485 730 700
750
3/8" 485 730 700 7501x315 230/1/50 0.52 102 5/8"
1/2"
1/2"
2x315 230/1/50 1.04 204 5/8" 485 930 900
2x315 230/1/50 1.04 204 5/8"
1/2"1x400 230/1/50 0.73 160 5/8"
1/2"
2x315 230/1/50 1.04 204 5/8" 1/2"
230/1/50 0.58 130 5/8"
2x315 230/1/50 1.04 204 5/8"
2x315 230/1/50 1.04 204 5/8"
1.04 204
1x350
5/8"1x400 230/1/50 0.73 160
5/8"2x315 230/1/50
640
640
640
730
930 900
3/8" 640
585 730 700 750
900 750
3/8"
485 750
900
Ligaç
ões
Conn
ectio
ns
1/2"
1/2"
1/2"
1/2"
1/2"
3/8"
3/8"
3/8"
Desc
arga
Disc
harg
e
3/8"
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
1790
5
Capa
cidad
eR4
04A
Capa
city
R404
A
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
Temperatura de evaporação [ºC]Evaporation temperature [ºC]
-15 -20-7.5 -10W dm3
3450 7- - 2150 1520 13202640
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
GRUPOSCONDENSING UNITS
-27.5 -30ºC
0 -5
GC 65V1 / 2FC-2.2Y 32 - - - -42 - - -
- 2820 2030
GC 70V2 / 2FC-2.2Y 32 - - - - - 2880
4890
354042 - - - - - 2730
4460 -GC 82V1 / 2FC-3.2Y 32 7170 6220 5310
4570 - -42 - - - - - -
GC 91V2 / 2FC-3.2Y 32 7440 6410 5450 5010 3810 742 - - - - - - - ---
GC 116V2 / 2FC-3.2Y 32 8040 6860 5780 5290 4800 - - -3990 11- - -316042 - 5550 4650 4240 3840
-
GC 82V1 / 2EC-2.2Y 32 - - - - - 3520 2520 22204320 742 - - - - - 2720 1920 16703370
-
GC 91V2 / 2EC-2.2Y 32 - - - - - 3590 2560 22504430 72790 1950 1700348042 - - - - -
4560
-4700 1142 - - - - - - - --GC 110V1 / 2EC-3.2Y 32 9190 7920 6720 6180 5630 - -
-4750 11- - -37806680 6050 -5020GC 116V2 / 2EC-3.2Y 32 9370 8040 6820 6260 5700 - -
42 - - 5480
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
GC 165V2 / 2EC-3.2Y 32 10280 8720 731042 8490 7170 5970
GC 116V2 / 2CC-3.2Y -42 -
Mode
loTy
pe
Preç
oPr
ice
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)
EUR
Opçõ
es (A
)Op
tions
(A)
5010 15
Alhe
tas
reve
stida
sCo
ated f
ins
- - -40405440 4910GC 82V1 / 2DC-2.2Y 32 - - - - - 3930 2840 25104790
GC 91V2 / 2DC-2.2Y
GC 157V1 / 2DC-3.2Y 32 1136042 -
GC 165V2 / 2DC-3.2Y 32 11520 8270
GC 110V1 / 2CC-3.2Y
72980 2110 185042 - - - - - 365032 - - - - -42 -
4030 2900 25504940 71890
-5700-
- - - - 3070 217037909700 8180 74907870 6600
6800 - - -5650
982015
6870 - -6030 5450 - - -45007570 1542 - 7990 6690 6100 5520 - -4550
32 - - - - -42 -
5010 3610 31706130
32112400- - - - 3880 27504760
- - -- -
- 5070 3640 32006230
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
11
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
- - 3940 2790 24304860
EUR
Linha
líquid
o (3
)(5)
Liquid
line
(3)(5
)
Pres
sosta
to BP
LP P
ress
ostat
Pres
sosta
to AP
HP P
ress
ostat
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el Ca
pota
(inso
noriz
. lige
ira)
Hous
ing(lig
ht ins
onor
iz.)
GC 65V1 / 2FC-2.2Y
Ver p
ágina
s 08 -
09Se
e pag
es 08
- 09
GC 91V2 / 2EC-2.2Y
GC 91V2 / 2DC-2.2Y
GC 70V2 / 2FC-2.2YGC 82V1 / 2FC-3.2YGC 91V2 / 2FC-3.2YGC 116V2 / 2FC-3.2YGC 82V1 / 2EC-2.2Y
GC 116V2 / 2EC-3.2YGC 110V1 / 2EC-3.2Y
GC 82V1 / 2DC-2.2YGC 165V2 / 2EC-3.2Y
GC 165V2 / 2DC-3.2YGC 157V1 / 2DC-3.2Y
- -3740 7- -
22001810 7
-
1550 13502060
40 TGC 2012/0
Tipo C2
Tipo A1
Tipo B2
Tipo D1
GC 116V2 / 2CC-3.2YGC 110V1 / 2CC-3.2Y
Tipo d
e bas
eFr
ame t
ype
Tipo A1
Tipo B2
Tipo A1
Tipo B2
Tipo D1
Tipo C2
Tipo C2
Tipo C2
Tipo A1
Tipo B2
Tipo D1
Tipo C2
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
W
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
640 100mm Kg
5851x400 230/1/50 0.73 160 5/8"
COMP
RESS
ORES
C
OMPR
ESSO
RS
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
Alim
entaç
ãoMP
S
Corre
nteCu
rrent
GRUP
OSCO
NDEN
SING
UNI
TS
A B C D Emm V / F / Hz A
GC 91V2 / 2FC-3.2Y
GC 82V1 / 2FC-3.2Y
2x315 230/1/50 1.04 204 5/8" 3/8" 485
GC 65V1 / 2FC-2.2Y
930 900 750 640 110 GC 70V2 / 2FC-2.2Y
730 700 750
585
930 900 750 640
640 105730 700 750
115485
535
2x315 230/1/50 1.04 204 5/8" 3/8"
1x400 230/1/50 0.73 160 5/8"
1/2"
2x350 230/1/50 1.16 260 5/8"
GC 82V1 / 2EC-2.2Y
GC 116V2 / 2FC-3.2Y
640 1287301x400 230/1/50 0.73 160 7/8" 700 750
1/2"
5/8"
1280 1250 750 640 1381/2"
980
1280
640 138 GC 91V2 / 2EC-2.2Y
1x450 400/3/50 0.48 200 7/8" 1/2" GC 110V1 / 2EC-3.2Y
3/8" 485 930 900 7502x315 230/1/50 1.04 204 7/8"
1250 750 640 164
157950 900 790
GC 116V2 / 2EC-3.2Y
2x400 230/1/50 1.46 320 7/8" 1/2" 585
5352x350 230/1/50 1.16 260 7/8" 1/2"
1280 1250 750 640 179 GC 165V2 / 2EC-3.2Y
GC 82V1 / 2DC-2.2Y
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
1x400 230/1/50 0.73 160 7/8" 3/8" 585 750 640 128
3/8" 485 930 900 750230/1/50 1.04 204 7/8"
730 700
GC 91V2 / 2DC-2.2Y
1x500 400/3/50 1.41 720 7/8" 1/2"
2x315
980
640 138
184950 900 790
2x350 230/1/50 1.16 260
7/8" 1/2"
GC 157V1 / 2DC-3.2Y
2x400 230/1/50 1.46 320 585 1280
GC 110V1 / 2CC-3.2Y
GC 165V2 / 2DC-3.2Y
1x450 400/3/50 0.48 200 7/8" 980 950 900
640 179
790 156
1250 750
7/8"
685
5/8"
5/8" 1/2"
GC 116V2 / 2CC-3.2Y
TGC 2012/0 41
1/2" 535 1280 1250 750
DESENHOS DRAWINGS
5/8"
Base Tipo A1 e D1Frame Type A1 and D1
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
640 163
5/8"
5/8"
840
3/8" 585
5/8"
5/8"
5/8"
5/8"
685
Ligaç
ões
Conn
ectio
ns
Líquid
oLiq
uidin
1/2"
1/2"
1/2"
3/8"
Desc
arga
Disc
harg
e
5/8"
3/8"
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
85906620
Alhe
tas
reve
stida
sCo
ated f
ins
104808120
100807730
- - -
6130
7390 - - -9460 - -
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
dm3
15
15
15
15
Opçõ
es (A
)Op
tions
(A)
- 6900
13440 12340
8450 4970 4370 15
EUR
330011250 9390
W
Temperatura de evaporação [ºC]Evaporation temperature [ºC]
0 -5 -7.5 -10 -15 -20
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
GRUPOSCONDENSING UNITS
-27.5 -30ºC
5
Capa
cidad
eR4
04A
Capa
city
R404
A
32 13020 -9540 8770 8000
8880
6680 -11220-
809042 - - - -
42 - - 7790 714032 13260 11400 9670
-
-- --
6490
-
5390 - -
- -6750
-
32 14560 -10370 9480 8600
-
7120 -12360698042 12010 10150 8480 7730
42 - - - --32 - - --
-
25503870 34205350 11
19-
4980 4080 2910
- -65005750
1542 - - - - 274032 - -
5660- - -
-4130
4520 3160
3190
36207190 5800
27704160 36507270 5850GC 165V2 / 4FC-3.2Y - 5740 458042 - - -
GC 157V1 / 4FC-5.2Y - - -42 -
- - - -
- -- -7230
-9580 8740
7780
-
- - -
9440 8630
1542 - - - -32 14150 12220 10410
- - -- -7310 -
1942 - 10930 9140 8340 6220 - - -11280 10330 9370
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
32 - - - -
GC 295V2 / 4EC-6.2Y
32 18380 15820
42 - - - -
42 - - 10840 9930
Mode
loTy
pe
GC 199V1 / 4DC-5.2Y
GC 175V2 / 4DC-5.2Y
GC 225V1 / 4EC-6.2Y
5280 3740 326032 - - - - 6990 5010 4410 1542 - - - - - 5360 3780
19
6500
GC 234V2 / 2CC-4.2Y
GC 110V1 / 4FC-3.2Y
GC 157V1 / 4FC-3.2Y
-
754032 15760 13410GC 234V2 / 4FC-5.2Y
GC 157V1 / 4EC-4.2Y
GC 165V2 / 4EC-4.2Y-
GC 165V2 / 4FC-5.2Y -
- - -32 13860 12010 10250
-32 -
-42 - - 10710 9810 892032 18640 16020 13580 12460 11350
-32 - - - - -
Tipo E4
Tipo D1
9840 - - -32 19940 16980 14280 13070 1186042 - 13780 11520 10510 9500 197820 - - -
4060
3950
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
53906580 46508540
Tipo E48270 5980 52701542 - - - -
32 - - - - - 1542 - - - - - 6330 4510
Preç
oPr
ice
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)
EUR
Linha
líquid
o (3
)(5)
Liquid
line
(3)(5
)
Pres
sosta
to BP
LP P
ress
ostat
Pres
sosta
to AP
HP P
ress
ostat
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el Ca
pota
(inso
noriz
. lige
ira)
Hous
ing(lig
ht ins
onor
iz.)
GC 157V1 / 2CC-4.2Y
Ver p
ágina
s 08 -
09Se
e pag
es 08
- 09
GC 165V2 / 2CC-4.2YGC 234V2 / 2CC-4.2YGC 110V1 / 4FC-3.2Y
GC 165V2 / 4FC-3.2YGC 157V1 / 4FC-3.2Y
GC 157V1 / 4FC-5.2Y
GC 234V2 / 4FC-5.2YGC 165V2 / 4FC-5.2Y
GC 165V2 / 4EC-4.2YGC 157V1 / 4EC-4.2Y
GC 234V2 / 4EC-6.2YGC 225V1 / 4EC-6.2Y
GC 199V1 / 4DC-5.2YGC 295V2 / 4EC-6.2Y
GC 175V2 / 4DC-5.2Y
42 TGC 2012/0
GC 234V2 / 4EC-6.2Y
Tipo d
e bas
eFr
ame t
ype
Tipo D1
Tipo C2
Tipo E4
Tipo D1
Tipo D1
Tipo C2
Tipo D1
Tipo C2
Tipo E4
Tipo D1
Tipo C2
Tipo D1
Tipo E49010 197460 - - -
GC 157V1 / 2CC-4.2Y
GC 165V2 / 2CC-4.2Y
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
Alim
entaç
ãoMP
S
Corre
nteCu
rrent
Desc
arga
Disc
harg
e
Líquid
oLiq
uidin
1250 750 179 GC 165V2 / 2CC-4.2Y
1400 1340 1100 1050 233 GC 234V2 / 2CC-4.2Y
COMP
RESS
ORES
C
OMPR
ESSO
RS
mm V / F / Hz A W
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
mm Kg
Ligaç
ões
Conn
ectio
ns
GRUP
OSCO
NDEN
SING
UNI
TS
A B C D E
790 184 GC 157V1 / 2CC-4.2Y
640
980 950 900
1280
1x500 400/3/50 1.41 720 7/8" 5/8" 1/2" 840
2x400 230/1/50 1.46 320 7/8" 5/8" 1/2" 585
0.48 200 7/8" 5/8" 1/2" 685
2x450 400/3/50 0.96 400 7/8" 5/8" 5/8" 720
980 950 900 790 169 GC 110V1 / 4FC-3.2Y
1x500 400/3/50 1.41 720 7/8" 5/8" 1/2" 840 980 950 900 790 197 GC 157V1 / 4FC-3.2Y
1x450 400/3/50
640 192 GC 165V2 / 4FC-3.2Y
1x500 400/3/50 1.41 720 7/8" 5/8" 1/2" 840 980 950 900 790 201 GC 157V1 / 4FC-5.2Y
2x400 230/1/50 1.46 320 7/8" 1280 1250 7505/8" 1/2" 585
1280 1250 750 GC 165V2 / 4FC-5.2Y
2x450 400/3/50 0.96 400 7/8" 5/8" 5/8" 720 1400 1340 1100 1050 250 GC 234V2 / 4FC-5.2Y
2x400 230/1/50 1.46 320 7/8" 5/8" 1/2"
950 900 790
1x500 400/3/50 1.41
640 196585
1x500 400/3/50 1.41 720 1 1/8" 5/8"
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
2x400 230/1/50 1.46 320 1 1/8" 5/8"
1/2" 840
1280 1250 750 640
199 GC 157V1 / 4EC-4.2Y980
1400 1340 1100 1050 250 GC 234V2 / 4EC-6.2Y
720 1 1/8" 5/8" 5/8" 840 980
194 GC 165V2 / 4EC-4.2Y
950 900
1/2" 585
790 220 GC 225V1 / 4EC-6.2Y
1400 1340 1100 1050 268 GC 295V2 / 4EC-6.2Y
2x450 400/3/50
2x450 400/3/50 0.96 400 1 1/8" 5/8" 5/8" 800
0.96 400 1 1/8" 5/8" 5/8" 720
TGC 2012/0 43
7/8" 1/2" 720 1400 1340 1100 1050
Base Tipo A1 e D1Frame Type A1 and D1
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
229 GC 175V2 / 4DC-5.2Y
900 790 208
DESENHOS DRAWINGS
2x450 400/3/50 0.96 400 1 1/8"
GC 199V1 / 4DC-5.2Y980 9501x500 400/3/50 1.41 720 1 1/8" 7/8" 1/2" 840
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
EUR
19
Opçõ
es (A
)Op
tions
(A)
Alhe
tas
reve
stida
sCo
ated f
ins
- 10250 7400 652012570- 7960 5650 49509810
- 19-
W dm3
12790 - - -10700 19- -
5
Capa
cidad
eR4
04A
Capa
city
R404
A
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
Temperatura de evaporação [ºC]Evaporation temperature [ºC]
-15 -20-7.5 -10
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
GRUPOSCONDENSING UNITS
-27.5 -30ºC
0 -5
GC 225V1 / 4DC-7.2Y 32 20450 17760 15190 1399042 - - - - - --
GC 234V2 / 4DC-7.2Y 32 20810 18020 15380 14150 12930 - - -10800 1942 - - - - - - - --13960 - - -11570 19
- 10150GC 338V2 / 4DC-7.2Y 32 23500 20010 16830 15400
42 - 16230 13580 12390 11200 - - -9220GC 225V1 / 4CC-6.2Y 32 - - - - 7340 648012430 1942 - - - - - 7860 5600 49009670GC 234V2 / 4CC-6.2Y 32 - - - -
42 - - - -GC 295V2 / 4CC-9.2Y 32 25570 22120 18880 17390 15890 - -13320
42 - - - 13940 12720 - -1061016370 - - -13680 19GC 338V2 / 4CC-9.2Y 32 26790 23030 19550 17960
42 - - 15820 14510 13190 - - -10960GC 451V2 / 4CC-9.2Y 32 28900 24590 20690 18940 17190 - - -14290 3042 23870 20240 16950 15480 14010 - - -11570
- 10630 7660 674012960 19GC 225V1 / 4VCS-6.2Y 32 - - - -42 - - - - - 8040 5700 49809830
36900GC 522V2 / 4TCS-12.2Y
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
GC 234V2 / 4VCS-6.2Y 32 - - - - - 10750 7720 679013140 19502010000GC 338V2 / 4VCS-10.2Y
GC 451V2 / 4VCS-10.2Y 32 31020 26370 22140 20240
GC 295V2 / 4TCS-8.2Y
42 - - - - - 8150 57601733032 28440 24450 20740 19040
42 - - 16530- - -14420
15120 19---11990
18340 - -13700 - -11300
15170
16980
3042 - 21420 17840 16240 14640 - -32 - - - -42 - - -
- 13240 9490 834016230 1910110 7120 6200- - 12470- - -17790GC 451V2 / 4TCS-12.2Y 32 35330 30340 25680 23550 21420
42 - - 20430 18700 30-
964018830 19
- -14030
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
- -31490 26510 2426042 - 25340 21260
22000 -1822032 30- 15340 10980
19410 17560 - - -14450
- 11770 8270 719014550
Pres
sosta
to AP
HP P
ress
ostat
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el Ca
pota
(inso
noriz
. lige
ira)
Hous
ing(lig
ht ins
onor
iz.)
GC 338V2 / 4PCS-10.2Y 32 - - - -42 - - - -
Mode
loTy
pe
Preç
oPr
ice
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)
EUR
Linha
líquid
o (3
)(5)
Liquid
line
(3)(5
)
Pres
sosta
to BP
LP P
ress
ostat
GC 225V1 / 4DC-7.2Y
Ver p
ágina
s 08 -
09Se
e pag
es 08
- 09
GC 234V2 / 4DC-7.2YGC 338V2 / 4DC-7.2YGC 225V1 / 4CC-6.2YGC 234V2 / 4CC-6.2YGC 295V2 / 4CC-9.2Y
GC 451V2 / 4CC-9.2YGC 338V2 / 4CC-9.2Y
GC 234V2 / 4VCS-6.2YGC 225V1 / 4VCS-6.2Y
GC 451V2 / 4VCS-10.2YGC 338V2 / 4VCS-10.2Y
GC 451V2 / 4TCS-12.2YGC 295V2 / 4TCS-8.2Y
GC 338V2 / 4PCS-10.2YGC 522V2 / 4TCS-12.2Y
44 TGC 2012/0
Tipo d
e bas
eFr
ame t
ype
Tipo D1
Tipo E4
Tipo F4
Tipo D1
Tipo F4
Tipo F4
Tipo D1
Tipo E4
Tipo F4
Tipo F4
Tipo E4
Tipo F4
Tipo E4
Tipo E4
Tipo F4
Tipo F4
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
W
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
790 223mm Kg
8401x500 400/3/50 1.41 720 1 1/8"
COMP
RESS
ORES
C
OMPR
ESSO
RS
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
Alim
entaç
ãoMP
S
Corre
nteCu
rrent
GRUP
OSCO
NDEN
SING
UNI
TS
A B C D Emm V / F / Hz A
GC 225V1 / 4CC-6.2Y
GC 338V2 / 4DC-7.2Y
2x450 400/3/50 0.96 400 1 1/8" 5/8" 720
GC 225V1 / 4DC-7.2Y
1400 1340 1100 1050 253 GC 234V2 / 4DC-7.2Y
980 950 900
875
980 950 900 790
1050 3031900 1840 1100
225840
720
1x500 400/3/50 1.41 720 1 1/8" 5/8"
2x500 400/3/50 2.82 1440 1 1/8"
7/8"
2x450 400/3/50 0.96 400 1 1/8"
GC 295V2 / 4CC-9.2Y
GC 234V2 / 4CC-6.2Y
1050 27314002x450 400/3/50 0.96 400 1 1/8" 1340 1100
7/8"
7/8"
1400 1340 1100 1050 2555/8"
1900
980
1050 306 GC 338V2 / 4CC-9.2Y
2x500 400/3/50 2.82 1440 1 1/8" 7/8" GC 451V2 / 4CC-9.2Y
5/8" 875 1900 1840 11002x500 400/3/50 2.82 1440 1 1/8"
950 900 790 267
3281840 1100 1050
GC 225V1 / 4VCS-6.2Y
2x450 400/3/50 0.96 400 1 1/8" 5/8" 720
8401x500 400/3/50 1.41 720 1 1/8" 5/8"
1400 1340 1100 1050 298 GC 234V2 / 4VCS-6.2Y
GC 338V2 / 4VCS-10.2Y
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
2x500 400/3/50 2.82 1440 1 1/8" 5/8" 875 1100 1050 359
7/8" 875 1900 1840 1100 400/3/50 2.82 1440 1 1/8"
1900 1840
GC 451V2 / 4VCS-10.2Y
2x450 400/3/50 0.96 400 1 3/8" 5/8"
2x500
1400
1050 381
3211340 1100 1050
2x500 400/3/50 2.82 1440
1 3/8" 7/8"
GC 295V2 / 4TCS-8.2Y
2x500 400/3/50 2.82 1440 875 1900
GC 522V2 / 4TCS-12.2Y
GC 451V2 / 4TCS-12.2Y
2x500 400/3/50 2.82 1440 1 3/8" 1900 1840 1100
1050 383
1050 399
1840 1100
1 3/8"
875
1 1/8"
1 1/8" 7/8"
GC 338V2 / 4PCS-10.2Y
TGC 2012/0 45
5/8" 875 1900 1840 1100
DESENHOS DRAWINGS
1 1/8"
Base Tipo A1 e D1Frame Type A1 and D1
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
1050 359
7/8"
7/8"
800
5/8" 800
7/8"
7/8"
7/8"
1 1/8"
875
Ligaç
ões
Conn
ectio
ns
Líquid
oLiq
uidin
7/8"
7/8"
7/8"
5/8"
Desc
arga
Disc
harg
e
7/8"
5/8"
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
Opçõ
es (A
)Op
tions
(A)
- 30
Alhe
tas
reve
stida
sCo
ated f
ins
28550 - - -23790
-- - - --
60-
62480
W dm3
24750 - - -20620 3027120-
Capa
cidad
eR4
04A
Capa
city
R404
A
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
Temperatura de evaporação [ºC]Evaporation temperature [ºC]
-15 -20-7.5 -10
GRUPOSCONDENSING UNITS
Tipo d
e bas
eFr
ame t
ype
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
GRUPOSCONDENSING UNITS
-27.5 -30ºC
0 -5
GC 451V2 / 4PCS-15.2Y 32 39810 34540 29480
5
42 - - - -- - - -GC 590V4 / 4PCS-15.2Y 32 43740 37390 31520 28840
42 - 29910 25140 2296026170 - - -21660 40- - -1711020790
- 17050 12320 1085020720 19- 18290 13000- 12910 9190 803015720GC 338V2 / 4NCS-12.2Y 32 - - - -
42 - - - -GC 451V2 / 4NCS-12.2Y 32 - - - - 1139022640 3042 - - - - - 14140 9850 855017640GC 522V2 / 4NCS-20.2Y 32 46460 40080 34080 31310
42 - - -
Linha
líquid
o (3
)(5)
Liquid
line
(3)(5
)
Pres
sosta
to BP
LP P
ress
ostat
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el Ca
pota
(inso
noriz
. lige
ira)
Hous
ing(lig
ht ins
onor
iz.)
GC 676V4 / 4NCS-20.2Y 32 50670 43180 36330 33230 30140 - -2497042 - 34880 29150 26570 23990 - -19700
- 20560 14780 1301025250 3013290
- 16200 11510 1007019970GC 451V2 / 4J-13.2Y 32 - - - -42 - - - -
GC 522V2 / 4J-13.2Y 32 - - - - - 21200 1513026220 3042 - - - - - 16820 11840 1033020920
32 72820
32180 - - -26830 40-
GC 590V4 / 4J-22.2Y 32 52530 45250 38440 3531042 - - - - - - - --
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
GC 902V4 / 4J-22.2Y 32 59030 50040 41910 38290 34660 - -28660 60-2347028540GC 522V2 / 4H-15.2Y
GC 676V4 / 4H-25.2Y 32 60270 52000 44240
GC 902V4 / 4H-25.2Y
GC 902V4 / 4G-30.2Y
- -
24950
42 49340 41650 34720 31630-32 - - - -
42 - - -24090 17490 1547029430 3011850
--
37090 - -- - 18860 1349023170
3097040660
-48560
6042 - - - - 30010 - -32 65790 56070 47200 4320042 - 46350 38840
39200 - - -32530 60- - -35470 32100 26490GC 522V2 / 4G-20.2Y 32 - - - - -
42 -26820 19610 1736032300
- - - 3013330
-37680 60
20590 1508024530
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
42 - - 4322044200 - - -3683052920 6045340 - -
39590 35970 - - -29830
37130 - - -30680GC 1044V4 / 4G-30.2Y 32 75840 64700 54520 4993042 - 53410 44850 40990
GC 451V2 / 4PCS-15.2Y
Mode
loTy
pe Pres
sosta
to AP
HP P
ress
ostat
Preç
oPr
ice
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)
EUR EUR
GC 338V2 / 4NCS-12.2Y
Ver p
ág. 0
8 - 09
See p
ag. 0
8 - 09GC 590V4 / 4PCS-15.2Y
GC 451V2 / 4NCS-12.2YGC 522V2 / 4NCS-20.2YGC 676V4 / 4NCS-20.2YGC 451V2 / 4J-13.2YGC 522V2 / 4J-13.2Y
Ver p
ágina
s 12 -
13Se
e pag
es 12
- 13GC 590V4 / 4J-22.2Y
GC 522V2 / 4H-15.2Y
GC 902V4 / 4H-25.2Y
GC 902V4 / 4J-22.2Y
GC 676V4 / 4H-25.2Y
GC 522V2 / 4G-20.2Y
GC 1044V4 / 4G-30.2YGC 902V4 / 4G-30.2Y
46 TGC 2012/0
Tipo F4
Tipo E4
Tipo F4
Tipo F4
Tipo F4
Tipo F4
Tipo E4
Tipo F4
Tipo F4
Tipo F4
Tipo F4
Tipo F4
Tipo F4
Tipo F4
Tipo F4
Tipo F4
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
Alim
entaç
ãoMP
S
Corre
nteCu
rrent
Desc
arga
Disc
harg
e
Líquid
oLiq
uidin
1340 1100 442 GC 590V4 / 4PCS-15.2Y
1900 1840 1100 1050 361 GC 338V2 / 4NCS-12.2Y
COMP
RESS
ORES
C
OMPR
ESSO
RS
mm V / F / Hz A W
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
mm Kg
Ligaç
ões
Conn
ectio
ns
GRUP
OSCO
NDEN
SING
UNI
TS
A B C D E
1050 390 GC 451V2 / 4PCS-15.2Y
1050
1900 1840 1100
1400
2x500 400/3/50 2.82 1440 1 5/8" 1 1/8" 7/8" 875
4x450 400/3/50 1.92 800 1 5/8" 1 1/8" 7/8" 1500
2.82 1440 1 3/8" 1 1/8" 7/8" 875
2x500 400/3/50 2.82 1440 1 3/8" 1 1/8" 5/8" 875
1900 1840 1100 1050 383 GC 451V2 / 4NCS-12.2Y
2x500 400/3/50 2.82 1440 1 5/8" 1 1/8" 7/8" 875 1900 1840 1100 1050 408 GC 522V2 / 4NCS-20.2Y
2x500 400/3/50
1050 517 GC 676V4 / 4NCS-20.2Y
2x500 400/3/50 2.82 1440 1 5/8" 1 1/8" 7/8" 875 1900 1840 1100 1050 425 GC 451V2 / 4J-13.2Y
4x500 400/3/50 5.64 2880 1 5/8" 1900 1840 11001 1/8" 1 1/8" 1650
1900 1840 1100 GC 522V2 / 4J-13.2Y
4x450 400/3/50 1.92 800 1 5/8" 1 1/8" 7/8" 1500 1400 1340 1100 1050 489 GC 590V4 / 4J-22.2Y
2x500 400/3/50 2.82 1440 1 5/8" 1 1/8" 7/8"
1840 1100 1050
4x500 400/3/50 5.64
1050 440875
4x500 400/3/50 5.64 2880 1 5/8" 1 1/8"
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
2x500 400/3/50 2.82 1440 1 5/8" 1 1/8"
1 1/8" 1650
1900 1840 1100 1050
592 GC 902V4 / 4J-22.2Y1900
1900 1840 1100 1050 606 GC 902V4 / 4H-25.2Y
2880 2 1/8" 1 1/8" 1 1/8" 1650 1900
445 GC 522V2 / 4H-15.2Y
1840 1100
7/8" 875
1050 576 GC 676V4 / 4H-25.2Y
1900 1840 1100 1050 455 GC 522V2 / 4G-20.2Y
4x500 400/3/50
2x500 400/3/50 2.82 1440 2 1/8" 1 1/8" 7/8" 875
5.64 2880 2 1/8" 1 1/8" 1 1/8" 1650
TGC 2012/0 47
1 1/8" 1 1/8" 1650 1900 1840 1100 1050
Base Tipo A1 e D1Frame Type A1 and D1
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
641 GC 1044V4 / 4G-30.2Y
1100 1050 610
DESENHOS DRAWINGS
4x500 400/3/50 5.64 2880 2 1/8"
GC 902V4 / 4G-30.2Y1900 18404x500 400/3/50 5.64 2880 2 1/8" 1 1/8" 1 1/8" 1650
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
Opçõ
es (A
)Op
tions
(A)
37070 26570 2337045660
W dm3
- 30730 22070 1943024340 17210 1503030140
32220
Tipo F4
- -
5
Capa
cidad
eR4
04A
Capa
city
R404
A
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
Temperatura de evaporação [ºC]Evaporation temperature [ºC]
-15 -20-7.5 -10
33550
Tipo F4
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
GRUPOSCONDENSING UNITS
-27.5 -30ºC
0 -5
GC 676V4 / 6J-22.2Y 32 - - - - 37820 6042 - - -
2027039680
Alhe
tas
reve
stida
sCo
ated f
ins
GC 1044V4 / 6J-33.2Y 32 83620 71420 60190 55100 50010 - - -41450 6042 - - 49270 44990 40720 - - -6042 - - - - - 26830 19510 17200
- 34670 25260 22340GC 676V4 / 6H-25.2Y 32 - - - - 41910
GC 902V4 / 6H-25.2Y 32 - - - - - 6042 - - - - - 29280 20830 1823036080Tipo F4
Tipo F42080041620
EUR
GC 902V4 / 6G-30.2Y 32 - - - - - 40820 29380 2587050080 6042 - - - - - 32370 23120
2260043730
GC 1044V4 / 6G-30.2Y 32 - - - - - 42000 30030 2639051910 6042 - - - - - 33610 23800
2336046430
GC 902V4 / 6F-40.2Y 32 - - - - - 46450 33740 2981056400 6042 - - - - - 35920 25760Pa
inel
manó
metro
s (4
)Ga
uge p
anel
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
GC 1044V4 / 6F-40.2Y 32 - - - - - 48230 34730 3060059130 6042 - - - - - 37680 26730
Pres
sosta
to AP
HP P
ress
ostat
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
Mode
loTy
pe
Preç
oPr
ice
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
EUR
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)Lin
ha líq
uido
(3)(5
)Liq
uid lin
e (3
)(5)
Pres
sosta
to BP
LP P
ress
ostat
Capo
ta(in
sono
riz. li
geira
)Ho
using
(light
inson
oriz.
)
Ver p
ágina
s 12 -
13Se
e pag
es 12
- 13
GC 676V4 / 6J-22.2YGC 1044V4 / 6J-33.2YGC 676V4 / 6H-25.2YGC 902V4 / 6H-25.2YGC 902V4 / 6G-30.2YGC 1044V4 / 6G-30.2Y
Tipo d
e bas
eFr
ame t
ype
Tipo F4
Tipo F4
Tipo F4
Tipo F4
48 TGC 2012/0
GC 902V4 / 6F-40.2YGC 1044V4 / 6F-40.2Y(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
Kg1900 18401 1/8"
mm1650
COMP
RESS
ORES
C
OMPR
ESSO
RS
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
Alim
entaç
ãoMP
S
Corre
nteCu
rrent
GRUP
OSCO
NDEN
SING
UNI
TS
A B C D EV / F / Hz A W
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
Desc
arga
Disc
harg
e
mm1100 1050 587
GC 1044V4 / 6J-33.2Y
GC 676V4 / 6J-22.2Y
4x500 400/3/50 5.64 2880 2 1/8" 1 1/8" 1650 1900 1840 1100 1050 668
4x500 400/3/50 5.64 2880 2 1/8"
1050 599 GC 676V4 / 6H-25.2Y
4x500 400/3/50 5.64 2880 2 1/8" 1 1/8" GC 902V4 / 6H-25.2Y
1 1/8" 1650 1900 1840 11004x500 400/3/50 5.64 2880 1 3/8"2 1/8"
GC 902V4 / 6G-30.2Y4x500 400/3/50 5.64 2880 2 1/8" 1 1/8"
1650 1900
19001650 1840 1100 1050 634
6301840 1100 1050
1840 1100
4x500 400/3/50 5.64 2880 2 1/8" 1 1/8" 1650
4x500 400/3/50 5.64 2880 2 1/8"
4x500 400/3/50 5.64 2880 2 1/8"
TGC 2012/0 49
677 GC 1044V4 / 6F-40.2Y1650 1900 1840 1100 10501 1/8"
Base Tipo A1 e D1Frame Type A1 and D1
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
Ligaç
ões
Conn
ectio
ns
Líquid
oLiq
uidin
1 3/8"
1 3/8"
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
1050 646 GC 902V4 / 6F-40.2Y1 1/8"
DESENHOS DRAWINGS
1 3/8"
1 3/8"
1 3/8"
1 5/8"
1 5/8"
1650
1900 1840 1100 1050 665 GC 1044V4 / 6G-30.2Y
1900
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
50 TGC 2012/0
Ver p
ágina
s 12 -
13Se
e pag
es 12
- 13
Capa
cidad
eR4
04A
Capa
city
R404
A
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
Temperatura de evaporação [ºC]Evaporation temperature [ºC]
W dm3
-20 -25 -27.5 -30 -35
GC 902V4 / S6F-30.2YGC 902V4 / S6G-25.2YGC 676V4 / S6H-20.2YGC 522V2 / S6J-16.2YGC 451V2 / S4G-12.2YGC 234V2 / S4N-8.2YGC 175V2 / S4T-5.2Y
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)Lin
ha líq
uido
(3)(5
)Liq
uid lin
e (3
)(5)
EUR
Capo
ta(in
sono
riz. li
geira
)Ho
using
(light
inson
oriz.
)
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
EUR
Pres
sosta
to BP
LP P
ress
ostat
Pres
sosta
to AP
HP P
ress
ostat
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el
Mode
loTy
pe
Preç
oPr
ice
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Opçõ
es (A
)Op
tions
(A)
Alhe
tas
reve
stida
sCo
ated f
ins
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
1825034970 32190 27070 2242019490 6042 - - - 37750
3698039860 34110 28780 23910GC 902V4 / S6F-30.2Y 32 - - -1908042 - - - 32310GC 902V4 / S6G-25.2Y 32 - - - 33870 28970 24440 20280 16520
154803142026080 23970
6023090
16610
29910 27510
1436013480
2740022570 20740
6017390 14360 30
GC 676V4 / S6H-20.2Y 32 - - - 29560 25250 21280 17640
2363016220 14910
42 - - - 28180 20110
GC 522V2 / S6J-16.2Y 32 - - -
10570 96003042 - - - 17530 12480 10270
19
42 - - - 24400
15740 13240 10940GC 451V2 / S4G-12.2Y 32 - - - 18420 1708042 - - - 11540
GC 175V2 / S4T-5.2Y6760 5410
51107890 640010080 8310
82407850
5600 4520713032 -
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
GRUPOSCONDENSING UNITS
-10 -40 -45ºC
-15
Tipo F4
Tipo d
e bas
eFr
ame t
ype
Tipo E4
Tipo E4
Tipo F4
Tipo F4
38103600
GC 234V2 / S4N-8.2Y 32 - - -
Tipo F4
Tipo F4
1542 - - -- - 8570 5870
7530 68304760
12080 11080
88508280
21770 18330 15190 1263011870
25500
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
1100
1050
1050 594
TGC 2012/0 51
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
1050 641 GC 902V4 / S6F-30.2Y1 3/8"
DESENHOS DRAWINGS
19002 1/8" 1840 1100
Base Tipo A1 e D1Frame Type A1 and D1
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
16504x500 400/3/50 5.64 2880
1 1/8"1 3/8"
1 1/8"
4x500 400/3/50 5.64 2880 2 1/8"
1100 1050 473
GC 676V4 / S6H-20.2Y
639
4x500 400/3/50 5.64 2880 2 1/8" 1 3/8" 1 1/8" 1650
875 1900 1840
1840
1650 1900 1840 1100 GC 902V4 / S6G-25.2Y
1900
426 GC 451V2 / S4G-12.2Y
2x500 400/3/50 2.82 1440 1 5/8" 1 3/8" 7/8"
7/8" 875 1900 1840 1100 10502x500 400/3/50 2.82 1440 1 5/8" 1 1/8"
GC 522V2 / S6J-16.2Y
GC 175V2 / S4T-5.2Y2x450 400/3/50 0.96 400 1 1/8"
1050 311 GC 234V2 / S4N-8.2Y720 1400 1340 11007/8" 5/8"2x450 400/3/50 0.96 400 1 1/8"
284
Corre
nteCu
rrent
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
Desc
arga
Disc
harg
e
D
1400 1340 1100 1050
COMP
RESS
ORES
C
OMPR
ESSO
RSGR
UPOS
COND
ENSI
NG U
NITS
A B C
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
Ligaç
ões
Conn
ectio
ns
Líquid
oLiq
uidin
E
7/8" 1/2" 720mm V / F / Hz A W mm Kg
Alim
entaç
ãoMP
S
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
Tipo A1
Tipo B2
Tipo A1
Tipo B2
Tipo B2
Tipo A1
Tipo B2
Tipo A1
Tipo B2
Tipo A1
Tipo B2
Tipo d
e bas
eFr
ame t
ype
Tipo A1
Tipo A1
Tipo B2
Tipo A1
GC 91V2 / A1.5-7Y
GC 65V1 / A1-6Y
GC 70V2 / A1-6Y
GC 51V1 / A1-7Y
GC 54V2 / A1-7Y
GC 65V1 / A1.5-7Y
GC 70V2 / A1.5-7Y
3040 2550 - -42 - 4210 3600 332032 5990
GC 91V2 / A1.5-7Y
Ver p
ágina
s 32 -
33Se
e pag
es 32
- 33
GC 70V2 / A1.5-7YGC 65V1 / A1.5-7YGC 54V2 / A1-7YGC 51V1 / A1-7YGC 70V2 / A1-6YGC 65V1 / A1-6YGC 54V2 / A0.7-6Y
-- - - 73120
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el Ca
pota
(inso
noriz
. lige
ira)
Hous
ing(lig
ht ins
onor
iz.)
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
5170 4410 4060 371042 - - 3360 3120 2870
3000 - - - 72430 - --32 5540 4840 4170 3860 355042 - - - - 2810
2950 - - - 72380 - - -32 5380 4720 4090 3790 349042 - - - - - 71820 1650 1320 1160
1780 1300 1150 732 - - - - - 2280
1660 148042 - - - - - 2140
2080 1680 1490
-32 - - - - - 2710 2250
3710 3230 2780 2570 2360 1990 -
32 4510 3920 3370 3110
4610 3990 3420 316042 3610 3160 2730 2520
- 7-
- 1850 1510 1090 960
2320 1960 - -2850 2410 - -
1880 1370 1210 742 - - - -
52 TGC 2012/0
GC 54V2 / A0.7-6Y 32 - - - - - 2290
GC 45V1 / A0.7-6YGC 54V2 / A0.7-5YGC 45V1 / A0.7-5YGC 28V1 / A0.7-5YGC 54V2 / A0.5-4Y
GC 28V1 / A0.5-4YGC 45V1 / A0.5-4Y
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
Alhe
tas
reve
stida
sCo
ated f
ins
Pres
sosta
to BP
LP P
ress
ostat
- - -32
Mode
loTy
pe
Preç
oPr
ice
Opçõ
es (A
)Op
tions
(A)
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)Lin
ha líq
uido
(3)(5
)Liq
uid lin
e (3
)(5)
Pres
sosta
to AP
HP P
ress
ostat
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
EUR EUR
7422890 2430
-
1180 5930GC 45V1 / A0.7-6Y 32 - - - -175042 - - - - - 1450 1050
- 2190 1810 1330
- 7-GC 54V2 / A0.7-5Y 32 3940 3430 2950 2730141042 3160 2760 2390 2210 2040 - -
2510 1730 - -
- 5630GC 45V1 / A0.7-5Y 32 - - 2800 2600136042 - - 2240 2080 1930 1100 740
2400 1680 - -
780 5780GC 28V1 / A0.7-5Y 32 - - - --42 - - - - - - 880
- 1520 1260 900
- 7-GC 54V2 / A0.5-4Y 32 3410 2950 2530 2330147042 2750 2390 2060 1900 1740 - -
2130 1790 - -GC 45V1 / A0.5-4Y 32 3230 2820 2430 2250
142042 - - 1960 1820 16702060 1740
-960 850 51240 1050 760 660
- 5-- -- -
GC 28V1 / A0.5-4Y 32 - - - -42 - - - -
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
Capa
cidad
eR4
04A
Capa
city
R404
A
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
dm3
5 0
GRUPOSCONDENSING UNITS
Evaporation temperature [ºC]-10 -15
-
Temperatura de evaporação [ºC]
-20 -27.5 -30
1570 1310ºC W
-5 -7.5
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
900 750 640 100 GC 70V2 / A1.5-7Y
Ligaç
ões
Conn
ectio
ns
Líquid
oLiq
uid
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
640 82 GC 45V1 / A0.7-6Y
90 GC 65V1 / A1-6Y
99 GC 54V2 / A0.7-6Y
GC 54V2 / A1-7Y
700 750 640 90 GC 65V1 / A1.5-7Y
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
TGC 2012/0 53
3/8" 485 730
1/2"
700 7501/2"
900 750 640 100 GC 70V2 / A1-6Y
700 750 640 86 GC 51V1 / A1-7Y
750 640 99
1x315 230/1/50 0.52 102 5/8"
1.04 204 5/8" 3/8" 485 930
1x400 230/1/50 0.73 160 5/8" 3/8"
2x315 230/1/50 1.04 204 5/8" 3/8" 485
900
4851x315 230/1/50 0.52 102 5/8" 3/8"
485
730 700 750
640 99 GC 54V2 / A0.7-5Y
GC 45V1 / A0.7-5Y640 82
930 900 750
GC 54V2 / A0.5-4Y
1x315 230/1/50 0.52 102 5/8" 3/8" GC 28V1 / A0.7-5Y
2x315 230/1/50 1.04 204 640
79700 750 640730
640
5/8"
700 7501/2" 82
3/8" 485 930 900 750 99
3/8" 485 7301x315 230/1/50 0.52 102 5/8"
3/8"mm
485V / F / Hz A
1x315 230/1/50 0.52 102 5/8"W Kg
B C D E
730 700 7501/2"in
640 79
GC 45V1 / A0.5-4Y
GC 28V1 / A0.5-4Y
COMP
RESS
ORES
C
OMPR
ESSO
RS
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
Alim
entaç
ãoMP
S
Corre
nteCu
rrent
GRUP
OSCO
NDEN
SING
UNI
TS
A
900 750 640
700 750 640
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
Desc
arga
Disc
harg
e
mm
2x315 230/1/50
585 730
2x315 230/1/50 1.04 204 5/8" 3/8" 485 930
1x350 230/1/50 0.58 130 5/8" 3/8" 535 730
2x315 230/1/50 1.04 204 5/8" 3/8" 485 9301/2"
1x400 230/1/50 0.73 160 5/8" 3/8" 585 730
2x315 230/1/50 1.04 204 5/8" 3/8" 485 9301/2"
2x315 230/1/50 1.04 204 5/8" 3/8" 485
Base Tipo A1 e D1Frame Type A1 and D1
1/2"
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
DESENHOS DRAWINGS
930 900 750 640 103 GC 91V2 / A1.5-7Y
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
Tipo C2
Tipo D1
Tipo C2
Tipo B2
Tipo A1
Tipo B2
Tipo A1
Tipo B2
Tipo D1
Tipo d
e bas
eFr
ame t
ype
Tipo A1
Tipo B2
Tipo A1
Tipo D1
Ver p
ágina
s 32 -
33Se
e pag
es 32
- 33
GC 157V1 / C3-12Y
GC 165V2 / C3-12Y
GC 91V2 / B2-10.1YGC 110V1 / C2-12YGC 116V2 / C2-12YGC 157V1 / C3-12YGC 165V2 / C3-12Y
GC 116V2 / C2-12Y
GC 82V1 / A1.5-8Y
GC 91V2 / A1.5-8Y
GC 82V1 / A1.5-8YGC 91V2 / A1.5-8YGC 82V1 / B1.5-9.1Y
GC 91V2 / B2-10.1Y
GC 70V2 / B1.5-10.1Y
GC 91V2 / B1.5-9.1Y
GC 82V1 / B1.5-9.1Y
GC 110V1 / B1.5-9.1YGC 91V2 / B1.5-9.1YGC 82V1 / B1.5-10.1Y
54 TGC 2012/0
GC 70V2 / B1.5-10.1YGC 82V1 / B2-10.1Y
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el Ca
pota
(inso
noriz
. lige
ira)
Hous
ing(lig
ht ins
onor
iz.)
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
Alhe
tas
reve
stida
sCo
ated f
ins
EUR EUR
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)Lin
ha líq
uido
(3)(5
)Liq
uid lin
e (3
)(5)
Pres
sosta
to BP
LP P
ress
ostat
Pres
sosta
to AP
HP P
ress
ostat
154460 - - -32 10470 9030 7700 7080 647042 - 7380 6320 5820 5330
5410 - -- 7280 6240 5760 5270
- - -
-
1142 - - - - - 4310154420 - - -
3500 2510 220032 10330 8930 7620 7020 6420 537042
27802490 2180
32 - - - - - 5340 4360 3160 2800
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
GC 110V1 / C2-12Y 32 - - -
Mode
loTy
pe
Preç
oPr
ice
Opçõ
es (A
)Op
tions
(A)
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
1142 - - - - - 4240 3460- - 5280 4320 3140
1980 7-32 7400 6490 5610 5190
3860 327042 5850 5180 4510 4180 2680 -4770 4020 3270 2250
4970 4170 3360 2310-
2030 7-GC 82V1 / B2-10.1Y 32 7930 6880 5890 54301820
42 6360 5550 4780 4050 34004410 2760 -
1980 7160032 - - - -
3010 2500- 3740 3100 2250
42 - - - -
- 3900 3200 23103480
2030 71640GC 82V1 / B1.5-10.1Y 32 - - - --
42 - - - - 3160- 2600 1870
- 7-32 7030 6100 5220 4810
2930 -4390 3680 - -
42 - - 4120 3800
- 11-GC 110V1 / B1.5-9.1Y 32 7490 6440 5460 5010401042 - 5140 4370 3650 3050 - -
4560 3800 - -
- 7-32 6770 5920 5090 4690
286042 - - 3980 3690 3390 - -4300 3610 - -
42 - 4490 3860 357032 - 5560 4760 4390 - 7-
3210 2710 - - -
2760 -4030 3390 - -3270 -
4670 4310 -- - 742 - - 3760 34903960 3340
Evaporation temperature [ºC]-10 -15
Temperatura de evaporação [ºC]
-20 -27.5 -30
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
Capa
cidad
eR4
04A
Capa
city
R404
A
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
dm3
5 0
GRUPOSCONDENSING UNITS
ºC W-5 -7.5
32 - 5420
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
5/8"
5/8"
5/8"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
Ligaç
ões
Conn
ectio
ns
Líquid
oLiq
uidin
1/2"
1/2"
1/2"
3/8"
Desc
arga
Disc
harg
e
3/8"5/8"
5/8" 3/8"
TGC 2012/0 55
156 GC 165V2 / C3-12Y585 1280 1250 750 640
DESENHOS DRAWINGS
Base Tipo A1 e D1Frame Type A1 and D1
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
950 900 790 156 GC 157V1 / C3-12Y
2x400 230/1/50 1.46 320 7/8" 1/2"
1x500 400/3/50 1.41 720 7/8"
GC 116V2 / C2-12Y
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
2x350 230/1/50 1.16 260 7/8" 1/2" 535
980 950 900 790 129 GC 110V1 / C2-12Y
1280 1250 750 640 136
1/2" 840 980
1x450 400/3/50 0.48 200 7/8" 1/2" 685
485
5/8"
97700 750 640 GC 82V1 / B2-10.1Y
2x315 230/1/50 1.04 204 3/4" 3/8"
585 730
GC 91V2 / B2-10.1Y930 900 750 640 108
1x400 230/1/50 0.73 160 3/4" 3/8"
7502x315 230/1/50 1.04 204
105
GC 82V1 / B1.5-10.1Y
GC 91V2 / B1.5-9.1Y
640 95
3/8"
3/8" 585
5/8"
730 700 750
3/8" 485 930 900 640 102 GC 70V2 / B1.5-10.1Y
1x400 230/1/50 0.73 160 5/8"
640485 930 900 7502x315 230/1/50 1.04 204 5/8"
GC 110V1 / B1.5-9.1Y
GC 82V1 / B1.5-9.1Y585
980 950 900 790
640
685200
1x400 230/1/50 0.73 160
585
95730 700 750
1215/8" 1/2"1x450 400/3/50 0.48
930 900 750 103 GC 91V2 / A1.5-8Y
1x400 230/1/50 0.73 160 5/8"
204 640
93730 700 750 640
2x315 230/1/50 1.04
COMP
RESS
ORES
C
OMPR
ESSO
RS
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
GRUP
OSCO
NDEN
SING
UNI
TS
mm V / F / Hz A W Kg
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
Alim
entaç
ãoMP
S
Corre
nteCu
rrent
A B C D Emm
GC 82V1 / A1.5-8Y
485
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
Tipo D1
Tipo C2
Tipo D1
Tipo E4
Tipo D1
Tipo C2
Tipo D1
Tipo C2
Tipo D1
Tipo C2
Tipo d
e bas
eFr
ame t
ype
Tipo D1
Tipo D1
Tipo C2
Tipo C2
GC 157V1 / D3-13.1YGC 165V2 / D3-13.1YGC 110V1 / D2-15.1Y
GC 110V1 / D2-11.1Y
GC 157V1 / D2-11.1Y
GC 157V1 / D3-15.1Y
GC 165V2 / D3-15.1Y
GC 199V1 / D3-15.1Y
GC 175V2 / D3-15.1Y
GC 110V1 / D2-15.1Y
GC 157V1 / D3-13.1Y
GC 110V1 / D2-13.1Y
GC 116V2 / D2-11.1Y
GC 116V2 / D2-13.1Y
GC 110V1 / D2-11.1Y
GC 199V1 / D3-15.1YGC 175V2 / D3-15.1Y
GC 165V2 / D3-15.1Y
Ver p
ágina
s 32 -
33Se
e pag
es 32
- 33
56 TGC 2012/0
GC 116V2 / D2-15.1YGC 157V1 / D3-15.1Y
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
GC 157V1 / D2-11.1YGC 116V2 / D2-11.1YGC 165V2 / D2-11.1YGC 110V1 / D2-13.1Y
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
Alhe
tas
reve
stida
sCo
ated f
ins
EUR EUR
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)Lin
ha líq
uido
(3)(5
)Liq
uid lin
e (3
)(5)
Pres
sosta
to BP
LP P
ress
ostat
Pres
sosta
to AP
HP P
ress
ostat
Capo
ta(in
sono
riz. li
geira
)Ho
using
(light
inson
oriz.
)
- 155530 - - -32 12550 10970 9470 8770 807042 - - 7550 7020 6490
6840 - -155670 - - -
32 13040 11330 9730 8990 825042 - 9030 7810 7240 6670
6970 - -- - 7410 6900 6390
- - -
-
1542 - - 7280 6790 6300 5390155460 - - -
- - -32 12300 10780 9340 8650 7970 677042
32403000 2670
32 12060 10610 9210 8550 7880 6700 - - -
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
GC 116V2 / D2-15.1Y 32 - - -
Mode
loTy
pe
Preç
oPr
ice
Opçõ
es (A
)Op
tions
(A)
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
1142 - - - - - 2030 4070- - 2490 4980 3650
3220 11265042 - - - - - 2010 4020 298032 - - - - - 2460 4930 3620
- 15-GC 165V2 / D3-13.1Y 32 11320 9800 8380 7710- -
7050 5890 - -42 - 7900 6790 5750 48106270
- 15-42 - 7780 6710 6200 5690 4760 - -32 11140 9680 8290 7640 6980 5840 - -
2940 112420GC 116V2 / D2-13.1Y 32 - - - -3740 2730
- 5590 4580 332042 - - - - 4550-
2920 11240042 - - - - - 4490 3700 271032 - - - - - 5520 4530 3300
- 15-GC 165V2 / D2-11.1Y 32 10080 8660 7350 6750- -
6150 5130 - -42 8050 6950 5910 4960 41405440
9950 8570
-
-
42 7030 6200 5380 4980 45906300
3870 -
4100 - -7280 6700
11-32 9070 7930 683042 7920 6850 5840 5380 4910 15-
-5780 4860 - -
6110 5100 - -321142 6840 6060 5280 4900 4510
5710 48103810 - - -
6720 6220 ---
Evaporation temperature [ºC]-10 -15
Temperatura de evaporação [ºC]
-20 -27.5 -30
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
Capa
cidad
eR4
04A
Capa
city
R404
A
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
dm3
5 0
GRUPOSCONDENSING UNITS
ºC W-5 -7.5
32 8870 7790
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
Ligaç
ões
Conn
ectio
ns
Líquid
oLiq
uidin
5/8"
5/8"
5/8"
1/2"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
1/2"
TGC 2012/0 57
GC 175V2 / D3-15.1Y720 1400 1340 1100 1050 1891 1/8"
Base Tipo A1 e D1Frame Type A1 and D1
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
2x450 400/3/50 0.96 400
7/8"
7/8" 1/2"
8401x500 400/3/50 1.41 720 1 1/8"
2x400 230/1/50 1.46 320 1 1/8" 1280 1250 750 640 156 GC 165V2 / D3-15.1Y
1/2" 168950 900 790 GC 199V1 / D3-15.1Y980
GC 157V1 / D3-15.1Y
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
1x500 400/3/50 1.41 720 1 1/8" 1/2" 840
1280 1250 750 640 136 GC 116V2 / D2-15.1Y
DESENHOS DRAWINGS
980 950 900 790 160
1/2" 585
980 950 900 GC 110V1 / D2-15.1Y
2x350 230/1/50 1.16 260 7/8" 1/2" 535
685 790 1291x450 400/3/50 0.48 200 7/8"
160 GC 157V1 / D3-13.1Y
2x400 230/1/50 1.46 320 1 1/8" 1/2" GC 165V2 / D3-13.1Y
1x500 400/3/50 1.41 720 790
1561250 750 640585 1280
260 7/8"
980 950 900
535
1 1/8"
1280 1250 750
1/2" 840 980 950 900
790 129
GC 116V2 / D2-13.1Y
GC 110V1 / D2-13.1Y
640 136
GC 165V2 / D2-11.1Y
1x450 400/3/50 0.48 200 7/8" 1/2"
585
685
1280 1250 750 640
2x350 230/1/50 1.16
GC 116V2 / D2-11.1Y
2x400 230/1/50 1.46 320 7/8" 1/2"
1/2" 5352x350 230/1/50 1.16 260 7/8"
0.48 200 7/8"
640 1361280 1250 750
151
C Dmm
790 156 GC 157V1 / D2-11.1Y
GC 110V1 / D2-11.1Y
1x500 400/3/50 1.41 720 7/8" 1/2" 840
685 980 950 900 790 1291x450 400/3/50Kg
950 900
A W
980
COMP
RESS
ORES
C
OMPR
ESSO
RS
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
GRUP
OSCO
NDEN
SING
UNI
TS
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
Alim
entaç
ãoMP
S
Corre
nteCu
rrent
Emm V / F / Hz
1/2"
Desc
arga
Disc
harg
e
A B
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
Tipo D1
Tipo C2
Tipo D1
Tipo E4
Tipo D1
Tipo E4
Tipo D1
Tipo C2
Tipo D1
Tipo E4
Tipo d
e bas
eFr
ame t
ype
Tipo D1
Tipo C2
Tipo D1
Tipo C2
TGC 2012/058
GC 175V2 / D4-19.1Y
Ver p
ágina
s 32 -
33Se
e pag
es 32
- 33
GC 199V1 / D4-19.1YGC 165V2 / D3-19.1YGC 157V1 / D3-19.1YGC 175V2 / D4-18.1YGC 199V1 / D4-18.1YGC 165V2 / D3-18.1YGC 157V1 / D3-18.1YGC 175V2 / D4-16.1YGC 199V1 / D4-16.1YGC 165V2 / D4-16.1YGC 157V1 / D4-16.1YGC 116V2 / D3-16.1YGC 110V1 / D3-16.1Y
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
Mode
loTy
pe
Preç
oPr
ice
Opçõ
es (A
)Op
tions
(A)
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Alhe
tas
reve
stida
sCo
ated f
ins
EUR EUR
Pres
sosta
to BP
LP P
ress
ostat
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)Lin
ha líq
uido
(3)(5
)Liq
uid lin
e (3
)(5)
Pres
sosta
to AP
HP P
ress
ostat
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el Ca
pota
(inso
noriz
. lige
ira)
Hous
ing(lig
ht ins
onor
iz.)
GC 175V2 / D4-19.1Y 32 - - -- - -
-42
---
42 - - - -6830
3910
4310 3860 156880 57504940 44108120 6700
- - - 8320 5020- 7060 5860 4370
4460 15
1542 - - - - - - 5490- 5060 4540
4170 3750- - 6730
1542 - - - - - - 5420 4130 3720- - - 6670 5030 4510
1542 - - - 8090 7520 6470 -10000 9250 7880 - - -
- -
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
GC 175V2 / D4-18.1Y 32 13910 12320 1076042 - - 8980
GC 157V1 / D3-19.1Y 32 - - -
GC 165V2 / D3-19.1Y 32 - - -
GC 199V1 / D4-19.1Y 32 - -
15-GC 199V1 / D4-18.1Y 32 14560 12800 11100 1029077608370 6640 - -9490 8050 - - -
3640 152980GC 165V2 / D3-18.1Y 32 - - - -546042 - - - - - 4530 3350
- 6770 5560 4090
3620 152960GC 157V1 / D3-18.1Y 32 - - - -539042 - - - - - 4490 3320
- 6700 5520 4070
- 15-GC 175V2 / D4-16.1Y 32 13670 11950 10280 9500712042 - - - 8340 7730 - -
8710 7320 - -
- 15-GC 199V1 / D4-16.1Y 32 14230 12350 10570 9740733042 - - 10020 8640 7980 - -
8910 7470 - -
- 15-GC 165V2 / D4-16.1Y 32 13390 11740 10130 9370702042 - - - - - - -
8610 7240 - -
- 15-GC 157V1 / D4-16.1Y 32 13120 11540 9990 9250692042 - - - - - - -
8510 7170 - -GC 116V2 / D3-16.1Y 32 - - - -
488042 - - - - -- 6020-
3620 3220 114800 4020 2980 26503240 1126704070 3000
4980 3650GC 110V1 / D3-16.1Y 32 - - - -
42 - - - -
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
Capa
cidad
eR4
04A
Capa
city
R404
A
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
dm3
5 0
GRUPOSCONDENSING UNITS
Evaporation temperature [ºC]-10 -15
-
Temperatura de evaporação [ºC]
-20 -27.5 -30
5940 4930ºC W
-5 -7.5
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
Base Tipo A1 e D1Frame Type A1 and D1
1/2"
TGC 2012/0 59
GC 175V2 / D4-19.1Y720 1400 1340 1100 1050 191
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
790 170 GC 199V1 / D4-19.1Y
2x450 400/3/50 0.96 400 1 1/8" 3/4"
3/4" 1/2" 840 980 950 9001x500 400/3/50 1.41 720 1 1/8"
1913/4"
GC 157V1 / D3-19.1Y
1250 750
1/2" 840
640 156 GC 165V2 / D3-19.1Y5/8" 1/2" 585 1280
160
1050
2x400 230/1/50 1.46 320
720
980 950 900 790
1 1/8"
230/1/50 1.46 320 1 1/8"
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
1x500 400/3/50 1.41 720 1 1/8" 5/8"
1/2"2x450 400/3/50 0.96 400 1 1/8"
DESENHOS DRAWINGS
GC 175V2 / D4-18.1Y1400 1340 1100
980 950 900 790 170 GC 199V1 / D4-18.1Y
GC 165V2 / D3-18.1Y
1x500 400/3/50 1.41 720 1 1/8" 3/4" 1/2" 840
585 1280 1250 750 640 1562x400 5/8" 1/2"
1/2"
1050 191 GC 175V2 / D4-16.1Y
1x500 400/3/50 1.41 720 1 1/8" 5/8"
3/4" 1/2" 720 1400 1340 11002x450 400/3/50 0.96 400
GC 165V2 / D4-16.1Y
1x500 400/3/50 1.41 720 1 1/8" 3/4" 1/2" 840
585 1280 1250 750 640 1582x400 230/1/50 1.46
980 950 900 790 170
1 1/8"
160 GC 157V1 / D3-18.1Y
GC 199V1 / D4-16.1Y
840 980 950 900 790
320 1 1/8" 3/4" 1/2"
1/2"
2x350 230/1/50 1.16 260 750 140 GC 116V2 / D3-16.1Y
1x500 400/3/50 1.41 720 1 1/8" 3/4"
1 1/8" 5/8" 1/2" 535 1280 1250
163 GC 157V1 / D4-16.1Y840 980 950 900 790
mm Kg
Ligaç
ões
Conn
ectio
ns
1x450 400/3/50 0.48 200 1 1/8" 5/8" 133
Alim
entaç
ãoMP
S
Corre
nteCu
rrent
1/2" 685 980 950 900 GC 110V1 / D3-16.1Y
640
COMP
RESS
ORES
C
OMPR
ESSO
RS
mm V / F / Hz A W
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
Desc
arga
Disc
harg
e
Líquid
oLiq
uidin
GRUP
OSCO
NDEN
SING
UNI
TS
A B C D E
790
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
Tipo D1
Tipo E4
Tipo E4
Tipo D1
Tipo C2
Tipo D1
Tipo C2
Tipo D1
Tipo E4
Tipo D1
Tipo C2
Tipo d
e bas
eFr
ame t
ype
Tipo D1
Tipo C2
Tipo D1
Tipo E4
60 TGC 2012/0
Ver p
ágina
s 32 -
33Se
e pag
es 32
- 33
GC 165V2 / Q4-25.1YGC 157V1 / Q4-25.1YGC 295V2 / Q5-24YGC 234V2 / Q5-24Y
GC 234V2 / Q5-21YGC 225V1 / Q5-24Y
GC 225V1 / Q5-21YGC 165V2 / Q4-20YGC 157V1 / Q4-20YGC 165V2 / F4-24.1Y
GC 234V2 / F5-19.1YGC 157V1 / F4-24.1Y
GC 225V1 / F5-19.1YGC 165V2 / F4-19.1Y
EURGC 157V1 / F4-19.1Y
Mode
loTy
pe
Preç
oPr
ice
Opçõ
es (A
)Op
tions
(A)
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Alhe
tas
reve
stida
sCo
ated f
ins
EUR
Pres
sosta
to BP
LP P
ress
ostat
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el Ca
pota
(inso
noriz
. lige
ira)
Hous
ing(lig
ht ins
onor
iz.)
4360 38107760 5590 4920 15
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)Lin
ha líq
uido
(3)(5
)Liq
uid lin
e (3
)(5)
- 7380 6100
Pres
sosta
to AP
HP P
ress
ostat
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
GC 165V2 / Q4-25.1Y 32 - - - - - 940042 - - - -
GC 157V1 / Q4-25.1Y 32 - - - 1542 - - - - -5540 48804310 37707230 6000
- - 9250 7660
- 1942 - 13970 12000 11070 10140 8470 - - -15050 13850 12650 10550 - -
1942 - - 11190 10380 9570 8060 -13160 - -
- -12080 10140 -
1942 - - - 10240 9460 7980 - - -13030 11970 10060 - - -
1542 - - - - - 7540 6340- - 9440 7880 5800 5150
4680 4160
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
GC 165V2 / F4-24.1Y 32 - - -42 - - -
GC 225V1 / Q5-24Y 32 18460 16260 14080
GC 234V2 / Q5-24Y 32 18780 16490 14240
GC 295V2 / Q5-24Y 32 20340 17630
154120GC 157V1 / F4-24.1Y 32 - - - --- 7400 6250 4640- 9290 7780 5750 5110
- 19-GC 234V2 / Q5-21Y 32 17200 15030 12930 11930722042 - 11820 10220 9440 8670 - -
10930 9130 - -
- 19-GC 225V1 / Q5-21Y 32 16960 14850 12800 11820716042 - - 10090 9340 8580 - -
10840 9060 - -
4240 153380GC 165V2 / Q4-20Y 32 - - - -658042 - - - - - 5370 3850
- 8120 6640 4800
4210 153360GC 157V1 / Q4-20Y 32 - - - -649042 - - - - - 5310 3820
- 8030 6580 4770
- 19-GC 234V2 / F5-19.1Y 32 16500 14370 12340 11380714042 - 11500 9960 9220 8480 - -
10430 8750 - -
- 19-GC 225V1 / F5-19.1Y 32 16290 14220 12230 11300708042 - 11350 9850 9130 8410 - -
10360 8700 - -GC 165V2 / F4-19.1Y 32 - - - -
638042 - - - - -- 8100-
4790 4230 156270 5190 3740 32804260 1533105260 3780
6670 4830GC 157V1 / F4-19.1Y 32 - - - -
42 - - - -
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
Capa
cidad
eR4
04A
Capa
city
R404
A
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
dm3
5 0
GRUPOSCONDENSING UNITS
Evaporation temperature [ºC]-10 -15
-
Temperatura de evaporação [ºC]
-20 -27.5 -30
8000 6600ºC W
-5 -7.5
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
7/8"
7/8"
7/8"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
Ligaç
ões
Conn
ectio
ns
Líquid
oLiq
uidin
3/4"
3/4"
3/4"
1/2"
Desc
arga
Disc
harg
e
1 1/8" 1/2"
Aspir
ação
Sucti
on
TGC 2012/0 61
1280 1250 750 640 187 GC 165V2 / Q4-25.1Y
DESENHOS DRAWINGS
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
Base Tipo A1 e D1Frame Type A1 and D1
GC 157V1 / Q4-25.1Y
2x400 230/1/50 1.46 320 1 1/8" 1/2" 585
840 980 950 900 790 1911x500 400/3/50 1.41 720 1 1/8" 1/2"
800 1400
1340 1100 1050 243 GC 234V2 / Q5-24Y
2x450 400/3/50 0.96 400 1 1/8" 5/8"
2x450 400/3/50 0.96 400 1 1/8"
2601340 1100 1050 GC 295V2 / Q5-24Y
GC 225V1 / Q5-24Y
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
1x500 400/3/50 1.41 720 1 1/8" 5/8" 840
1280 1250 750 640 183 GC 165V2 / F4-24.1Y
980 950 900 790 212
5/8" 720 1400
GC 157V1 / F4-24.1Y
2x400 230/1/50 1.46 320 1 1/8" 1/2" 585
840 980 950 900 790 188
3/4"
1x500 400/3/50 1.41 720 1 1/8" 1/2"
720 1400
790 212 GC 225V1 / Q5-21Y
2x450 400/3/50 0.96 400 1 1/8" 5/8"
9001x500 400/3/50 1.41 720
2431340 1100 1050 GC 234V2 / Q5-21Y
1.46 320 1 1/8"
980 950 900
1/2" 585
1 1/8"
1280 1250 750
5/8" 840 980 950
GC 165V2 / Q4-20Y
GC 157V1 / Q4-20Y
640 183
GC 234V2 / F5-19.1Y
1x500 400/3/50 1.41 720 1 1/8" 1/2"
720
840
10502x450 400/3/50 0.96 400 1 1/8"
2x400 230/1/50
320
2395/8"
5/8" 840
1400 1340 1100
790 188
640 183
840Kg
GC 165V2 / F4-19.1Y
1x500 400/3/50 1.41 720 1 1/8" GC 225V1 / F5-19.1Y
1280 1250585
790 209980 950 900
2x400 230/1/50 1.46
1x500 400/3/50 1.41 720mm V / F / Hz A W
Corre
nteCu
rrent
GRUP
OSCO
NDEN
SING
UNI
TS
A B C D E
980mm
COMP
RESS
ORES
C
OMPR
ESSO
RS
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
Alim
entaç
ãoMP
S
Potên
cia ab
s.Ab
sorb
ed po
wer
GC 157V1 / F4-19.1Y1 1/8" 790 188950 900
750
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
Tipo E4
Tipo F4
Tipo F4
Tipo E4
Tipo D1
Tipo E4
Tipo E4
Tipo E4
Tipo F4
Tipo F4
Tipo d
e bas
eFr
ame t
ype
Tipo D1
Tipo E4
Tipo E4
Tipo E4
TGC 2012/062
GC 295V2 / S8-42Y Ver p
ágina
s34
- 35
See p
ages
34 -
35
GC 522V2 / S10-39YGC 451V2 / S10-39YGC 295V2 / S7-39YGC 338V2 / S7-33YGC 338V2 / Q7-33.1Y
GC 295V2 / Q7-28.1YGC 234V2 / Q5-28.1Y
GC 295V2 / Q5-33.1Y
GC 225V1 / Q5-28.1Y
Ver p
ágina
s 32 -
33Se
e pag
es 32
- 33GC 295V2 / Q5-25.1Y
GC 295V2 / Q7-25.1Y
GC 234V2 / Q5-25.1YGC 225V1 / Q5-25.1Y
Preç
oPr
ice
Opçõ
es (A
)Op
tions
(A)
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Pres
sosta
to BP
LP P
ress
ostat
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el Ca
pota
(inso
noriz
. lige
ira)
Hous
ing(lig
ht ins
onor
iz.)
EUR EUR
Alhe
tas
reve
stida
sCo
ated f
ins
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
8360 7410 1942 - - - - - 13290- 10650 9450GC 295V2 / S8-42Y 32 - - -
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)Lin
ha líq
uido
(3)(5
)Liq
uid lin
e (3
)(5)
Pres
sosta
to AP
HP P
ress
ostat
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
Mode
loTy
pe
- 17190 1443011290
- - 3042 27860 24280 20940 19400 17860 15150 - - -25270 23350 21440 18160 -
3042 - - 20270 18830 17380 14800 -22800 - -
- -20980 17820 -
1942 - - - - - 13360 11200 8430 7560- - 16360 13670 10310 9260
1942 - - 16410 15250 14090 11960 -18720 17240 14620 - - -
- -
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
GC 338V2 / S7-33Y 32 26760 23400 2021042 - - 16000
GC 295V2 / S7-39Y 32 - - -
GC 451V2 / S10-39Y 32 32810 28570 24620
GC 522V2 / S10-39Y 32 34060 29490
19-GC 338V2 / Q7-33.1Y 32 26310 23140 20040 185501373014860 11630 - -17070 14400 - - -
7540 196160GC 295V2 / Q5-33.1Y 32 - - - -1128042 - - - - - 9360 6920
- 13870 11480 8470
- 19-GC 295V2 / Q7-28.1Y 32 22930 20110 17370 160701189042 - - - 13890 12890 10060 -
14770 12450 - -
6210 194940GC 234V2 / Q5-28.1Y 32 - - - -930042 - - - - - 7710 5600
- 11690 9640 7020
6180 194910GC 225V1 / Q5-28.1Y 32 - - - -919042 - - - - - 7640 5560
- 11570 9570 6980
- 19-GC 295V2 / Q7-25.1Y 32 21050 18170 15440 14180870042 - 14490 12370 11390 10400 - -
12920 10760 - -
- 19-GC 295V2 / Q5-25.1Y 32 20780 18040 15440 14230881042 - 14350 12370 11430 10490 - -
13020 10910 - -GC 234V2 / Q5-25.1Y 32 19140 16850 14590 13510
837042 - - 11510 10700 989012430 10480
-- - 19- - - -
- 19-- -- -
GC 225V1 / Q5-25.1Y 32 18820 16620 14430 1337042 - - - -
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
Capa
cidad
eR4
04A
Capa
city
R404
A
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
dm3
5 0
GRUPOSCONDENSING UNITS
Evaporation temperature [ºC]-10 -15
12310
Temperatura de evaporação [ºC]
-20 -27.5 -30
10390 -ºC W
-5 -7.5
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
Ligaç
ões
Conn
ectio
ns
Líquid
oLiq
uidin
1 1/8"
7/8"
1 1/8"
5/8"
1 1/8"
7/8"
7/8"
7/8"
7/8"
7/8"
7/8"
1 1/8"
1 1/8"
5/8"
TGC 2012/0 63
GC 295V2 / S8-42Y800 1400 1340 1100 1050 3021 3/8"
Base Tipo A1 e D1Frame Type A1 and D1
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
2x450 400/3/50 0.96 400
1 1/8"
1 1/8" 5/8"
8752x500 400/3/50 2.82 1440 1 3/8"
2x500 400/3/50 2.82 1440 1 3/8" 1900 1840 1100 1050 360 GC 451V2 / S10-39Y
7/8" 3751840 1100 1050 GC 522V2 / S10-39Y1900
GC 295V2 / S7-39Y
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
2x450 400/3/50 0.96 400 1 3/8" 5/8" 800
1900 1840 1100 1050 335 GC 338V2 / S7-33Y
DESENHOS DRAWINGS
1400 1340 1100 1050 302
7/8" 875
1900 1840 1100 GC 338V2 / Q7-33.1Y
2x500 400/3/50 2.82 1440 1 3/8" 5/8" 875
875 1050 2932x500 400/3/50 2.82 1440 1 3/8"
260 GC 295V2 / Q7-28.1Y
2x450 400/3/50 0.96 400 1 1/8" 5/8" GC 295V2 / Q5-33.1Y
2x450 400/3/50 0.96 400 1050
2601340 1100 1050800 1400
400 1 1/8"
980 950 900
720
1 3/8"
1400 1340 1100
5/8" 800 1400 1340 1100
790 212
GC 234V2 / Q5-28.1Y
GC 225V1 / Q5-28.1Y
1050 243
GC 295V2 / Q7-25.1Y
1x500 400/3/50 1.41 720 1 1/8" 5/8"
800
840
1400 1340 1100 1050
2x450 400/3/50 0.96
GC 295V2 / Q5-25.1Y
2x450 400/3/50 0.96 400 1 1/8" 5/8"
5/8" 8002x450 400/3/50 0.96 400 1 1/8"
1.41 720 1 1/8"
1050 2601400 1340 1100
260
C Dmm
1050 243 GC 234V2 / Q5-25.1Y
GC 225V1 / Q5-25.1Y
2x450 400/3/50 0.96 400 1 1/8" 5/8" 720
840 980 950 900 790 2121x500 400/3/50Kg
1340 1100
A W
1400
COMP
RESS
ORES
C
OMPR
ESSO
RS
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
GRUP
OSCO
NDEN
SING
UNI
TS
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
Alim
entaç
ãoMP
S
Corre
nteCu
rrent
Emm V / F / Hz
5/8"
Desc
arga
Disc
harg
e
A B
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
GC 676V4 / V25-71YGC 902V4 / V25-71Y
GC 451V2 / S15-56YGC 590V4 / S20-56YGC 676V4 / S20-56YGC 451V2 / V15-59YGC 676V4 / V20-59YGC 522V2 / V15-71Y
GC 451V2 / S12-42YGC 522V2 / S12-42YGC 451V2 / S10-51YGC 451V2 / S10-52YGC 522V2 / S15-52YGC 590V4 / S15-52Y
Tipo F4
Tipo F4
Tipo F4
Tipo F4
Tipo F4
Tipo E4
Tipo F4
Tipo E4
Tipo F4
Tipo F4
Tipo d
e bas
eFr
ame t
ype
Tipo F4
Tipo F4
Tipo F4
Tipo F4
64 TGC 2012/0
Ver p
ágina
s 34 -
35Se
e pag
es 34
- 35
Alhe
tas
reve
stida
sCo
ated f
ins
EUR EUR
Pres
sosta
to BP
LP P
ress
ostat
Pres
sosta
to AP
HP P
ress
ostat
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el Ca
pota
(inso
noriz
. lige
ira)
Hous
ing(lig
ht ins
onor
iz.)
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
GC 902V4 / V25-71Y 32 61870 53430 45520
Mode
loTy
pe
Preç
oPr
ice
Opçõ
es (A
)Op
tions
(A)
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Linha
líquid
o (3
)(5)
Liquid
line
(3)(5
)
- - 6042 49400 42800 36550 33640 30730 -41870 - -
25650
- - 6042 - - 33590 31110 28640 24120 - - -56120 49230 42500 39290 36090 30370 -
38220 31930 -
3042 - - - - - 23550 19750- 18280 16380
14750 13160- 29150 24350
6042 - 34500 29560 27230 24900 20790 - - -34190 31240 26120 - - -
3042 - - - - - 20010 16780- - 24770 20660 15470 13850
12520 11170
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
GC 451V2 / V15-59Y 32 - - -
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)
42 - 34750 30140
GC 676V4 / V20-59Y 32 50110 43440 37130
GC 522V2 / V15-71Y 32 - - -
GC 676V4 / V25-71Y 32
60-GC 676V4 / S20-56Y 32 48920 42600 36680 3394027960 25790 21880 - -
31200 26440 - - -
- 40-GC 590V4 / S20-56Y 32 46920 41150 35640 330602132042 - - 29080 27060 25040 - -
30470 25900 - -
13420 3010800GC 451V2 / S15-56Y 32 - - - -1639042 - - - - - 14940 12140
- 20180 18400 15020
- 40-GC 590V4 / S15-52Y 32 44050 38390 33070 306001967042 - 31200 27080 25130 23180 - -
28140 23850 - -
- 30-GC 522V2 / S15-52Y 32 42350 37150 32180 298501919042 - - 26180 24360 22550 - -
27520 23390 - -
12340 3010050GC 451V2 / S10-52Y 32 - - - -1818042 - - - - - 15130 11260
- 22210 18440 13780
12220 309960GC 451V2 / S10-51Y 32 - - - -1801042 - - - - - 14980 11160
- 22000 18250 13650
- 30-GC 522V2 / S12-42Y 32 35330 30510 25990 239001460042 28520 24620 20960 19250 17550 - -
21810 18210 - -3042 - - 20190 18600 17010 14200 -
2126032 33890 29440 25210 23240- -
17800 -ºC W
- -
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
Capa
cidad
eR4
04A
Capa
city
R404
A
Temperatura de evaporação [ºC]
-20 -27.5 -30
GRUPOSCONDENSING UNITS
dm3
5 0 -5 -7.5 Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
Evaporation temperature [ºC]-10 -15
GC 451V2 / S12-42Y
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
1050
1 3/8"
1 3/8"
Ligaç
ões
Conn
ectio
ns
Líquid
oLiq
uidin
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 5/8"
1900 1840 1100
E
1050
Base Tipo B2 e C2Frame Type B2 and C2
1840 1100 1050
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1100 1050
1050
1900 1840 1100 1050
1050
7/8" 1500 1400 1340 1100
2x500 400/3/50 2.82 1440 1 5/8"
GC 676V4 / V25-71Y
TGC 2012/0 65
DESENHOS DRAWINGS
Base Tipo A1 e D1Frame Type A1 and D1
GC 902V4 / V25-71Y1650 19004x500 400/3/50 5.64 2880 2 1/8" 1 1/8"
1650 1900
Base Tipo E4 e F4Frame Type E4 and F4
586
55518404x500 400/3/50 5.64 2880 2 1/8"
544
7/8" 875 1900 1840 1100
GC 676V4 / V20-59Y
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
4x500 400/3/50 5.64 2880 1 5/8" 1 1/8" 1650
1900 1840 1100 1050 415 GC 451V2 / V15-59Y
430 GC 522V2 / V15-71Y
2x500 400/3/50 2.82 1440 1 5/8" 7/8" 875
1650
GC 590V4 / S20-56Y
4x500 400/3/50 5.64 2880 1 5/8" 1 1/8"
1500 1400
GC 676V4 / S20-56Y1900 1840 1100 1050 498
371 GC 451V2 / S15-56Y
4x450 400/3/50 1.92 800 1 5/8" 7/8"
11002x500 400/3/50 2.82 1440 1 5/8" 7/8" 875 1900 1840
4251340 1100 1050
375
GC 590V4 / S15-52Y
GC 522V2 / S15-52Y
1050 412
GC 451V2 / S10-52Y
2x500 400/3/50 2.82 1440 1 5/8" 7/8"
875
875
1900 1840 1100 1050
4x450 400/3/50 1.92 800
3601900 1840 1100
360
GC 451V2 / S10-51Y
2x500 400/3/50 2.82 1440 1 3/8" 5/8"
5/8" 8752x500 400/3/50 2.82 1440 1 3/8"
2x500 400/3/50 2.82 1440 1 3/8" 7/8" 875
8751 3/8"2x500 400/3/50 2.82 1440mm
7/8"
Desc
arga
Disc
harg
e
1900
A B C DV / F / Hz
1840 1100
COMP
RESS
ORES
C
OMPR
ESSO
RS
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
Alim
entaç
ãoMP
S
GRUP
OSCO
NDEN
SING
UNI
TS
mm KgA W
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
Corre
nteCu
rrent
1900 1840 1100 1050 375 GC 522V2 / S12-42Y
GC 451V2 / S12-42Y360
1050
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
GC 902V4 / Z30-126Y
Ver p
ágina
s 34 -
35Se
e pag
es 34
- 35
GC 676V4 / V20-84YGC 902V4 / V30-84YGC 1044V4 / V30-84YGC 676V4 / V25-93YGC 902V4 / V32-93YGC 1044V4 / V32-93YGC 676V4 / V25-103YGC 676V4 / V35-103YGC 902V4 / Z25-106YGC 1044V4 / Z35-106Y
Tipo F442 - - - - - 39480 33040 24180- 50580 42000 30610 27060 6021370GC 902V4 / Z30-126Y 32 - - - -
Tipo F442 - - 51920 48140 44370 37540 - -55590 46840 - - - 60-GC 1044V4 / Z35-106Y 32 86500 75830 65450 60520
Tipo F442 - - - - - 36070 29700 21330- 45520 37310 26800 23540 6018730
Tipo F442 - - - 50490 47120 43750 - -53270 45470 - - - 60-
- - 34550 28750 21060 18650 6026780
GC 902V4 / Z25-106Y 32 - - - -GC 676V4 / V35-103Y
22610 16800 1496042 - - - - -
Tipo F4
Tipo F4
Tipo F4
Tipo d
e bas
eFr
ame t
ype
Tipo F4
Tipo F4
Tipo F4
Tipo F4
GRUPOSCONDENSING UNITS
COMPRESSORES COMPRESSORS
Mode
loTy
pe Temp
eratu
ra am
biente
Ambie
nt tem
pera
ture
Capa
cidad
eR4
04A
Capa
city
R404
A
Volum
e dep
ósito
líquid
oLiq
uid re
ceive
r volu
me
Temperatura de evaporação [ºC]
-20 -27.5 -30ºC W dm3
5 0 -5 -7.5
GC 902V4 / V30-84Y 32 70330 61310 52710 48670 4463042 -
37530 - - - 60--- 42330 39130 35940 30250 -GC 1044V4 / V30-84Y 32 73540 63680 54420 50140
42 - 51380 4401045850 38430 - - - 60-40570 37130 31120 - -
GC 676V4 / V25-93Y 32 - - - - - 36820 30490 22150 19540 601503042 - - - - - 28790 23840 17140GC 902V4 / V32-93Y 32 74430 65030 55890 51530 47180 39400 - - - 60-42 - - 44330 40920 37510 31310 - -GC 1044V4 / V32-93Y 32 78410 67950 57980 53310 48650 40470 - - - 60-32320 - -42 - 54210 46340 42630 38910
24810 6020360GC 676V4 / V25-103Y 32 - - - -- 36600 30430 22760
- 44230 36760 27630
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
Sepa
rado
r As
piraç
ão (1
)(5)
Sucti
on
accu
mulat
or (1
)(5)
Sepa
rado
r óleo
(2
)(5)
Oil S
epar
ator
(2)(5
)Lin
ha líq
uido
(3)(5
)Liq
uid lin
e (3
)(5)
Pres
sosta
to BP
LP P
ress
ostat
42 - - - -
GRUPOSCONDENSING UNITS
Evaporation temperature [ºC]-10 -15
GC 676V4 / V20-84Y 32 -
32 80810 71220 61990 57630
- -
Capo
ta(in
sono
riz. li
geira
)Ho
using
(light
inson
oriz.
)
Capo
ta(in
sono
r. ele
vada
)Ho
using
(hea
vy in
sono
riz.)
Mode
loTy
pe
Preç
oPr
ice
Opçõ
es (A
)Op
tions
(A)
Grup
o stan
dard
Stan
dard
co
nden
sing u
nit
Extra
s do
comp
ress
orEx
tras d
o co
mpre
ssor
Alhe
tas
reve
stida
sCo
ated f
ins
EUR EUR
Pres
sosta
to AP
HP P
ress
ostat
Pres
sosta
to BP
/AP
LP/H
P Pr
esso
stat
Paine
l ma
nóme
tros
(4)
Gaug
e pan
el
66 TGC 2012/0
(1) Inclui separador de aspiração e tubagem de interligação separador-compressor isolados(2) Inclui separador de óleo e linha de retorno de óleo com visor, válv. solenóide e válv. passagem(3) Inclui filtro de líquido (filtro de cargas substituiveis acima de 5/8" ), visor e válvula de corte(4) Inclui manómetros de Ø60mm de baixa pressão, alta pressão e de óleo (quando aplicável)(5) Os acessórios da linha de aspiração, descarga e líquido foram seleccionados de acordo com osdiâmetros da tabela acima. Para um cálculo rigoroso é favor contactar a CENTAURO(A) Preços aplicáveis somente quando encomendados com o grupo. Os opcionais constantes destatabela são fornecidos montados no grupo
(1) Includes insulated suction accumulator and insulated accumulator-compressor line(2) Includes oil separator and oil return line with solenoid valve, cut-off valve and sight glass(3) Includes liquid line filter (with replacable cores above 5/8") sight glass and shut-off valve(4) Includes Ø60mm LP, HP and oil pressostat gauges (when applicable)(5) Suction, discharge and liquid line acessories are selected according to the diameters ofthe above table. For a more extensive calculation, please contact CENTAURO(A) Prices aplicable only when ordered together with the condensing unit. All optionsmentioned in this list are supplied assembled in the condensing unit
4x500 400/3/50 5.64 2880 1100 1050 635 GC 902V4 / Z30-126Y2 1/8" 1 3/8" 1 1/8" 1650 1900 1840
4x500 400/3/50 5.64 2880 1900 1840
1840 11004x500
4x500 400/3/50 5.64 2880
1 3/8"
1 3/8"
1 3/8"
1 3/8"
4x500 400/3/50 5.64 2880 2 1/8"
4x500 400/3/50 5.64 2880 2 1/8"
Ligaç
ões
Conn
ectio
ns
Líquid
oLiq
uidin
1 1/8"
1 3/8"
1 3/8"
COMP
RESS
ORES
C
OMPR
ESSO
RS
Venti
lador
esFa
ns
Dime
nsõe
sDi
mens
ions
Peso
Weig
ht
Mode
loTy
peN.º x
Diâm
etro
Nr x
Diam
eter
Alim
entaç
ãoMP
S
Corre
nteCu
rrent
Potên
cia ab
s.Ab
sorb
ed po
wer
Aspir
ação
Sucti
on
Desc
arga
Disc
harg
e
GRUP
OSCO
NDEN
SING
UNI
TS
A B C D E
7/8"mm V / F / Hz A W mm Kg
4x500 400/3/50 5.64 2880 1 5/8" 1840 1100 1050 550 GC 676V4 / V20-84Y
4x500 400/3/50 5.64 2880 2 1/8" 1 1/8" 1650 1900 1840 1100 1050 589 GC 902V4 / V30-84Y
1650 1900
1900 1840 1100 1050 561 GC 676V4 / V25-93Y
4x500 400/3/50 5.64 2880 2 1/8" 1 1/8" 1650 1900 1840 1100 1050 620 GC 1044V4 / V30-84Y
4x500 400/3/50 5.64 2880 2 1/8" 1 1/8" 1650
1 1/8" 1650
4x500 400/3/50 5.64 2880 2 1/8" 1 1/8" 1650 1900
1840 1100 10501900
1050 561 GC 676V4 / V25-103Y1 1/8" 1650
594 GC 902V4 / V32-93Y
1840 1100 1050 625 GC 1044V4 / V32-93Y
1050 561 GC 676V4 / V35-103Y2 1/8"
1100 1050 625 GC 902V4 / Z25-106Y16502 1/8" 1 3/8" 1 1/8"
1 3/8" 1 1/8" 1650 1900
1900 1840 1100
1840 1100
TGC 2012/0 67
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
Base Tipo A1 e D1Frame Type A1 and D1
Base Tipo E4 e F4Frame Type E4 and F4
Base Tipo B2 e C2Frame Type B2 and C2
1 3/8" 1 1/8" 1650 1900
DESENHOS DRAWINGS
400/3/50 5.64 2880 2 1/8" 1050 659 GC 1044V4 / Z35-106Y
FORNECIMENTO STANDARDBase metálica, condensador, compressorcom óleo ester e resistência de cárter,eliminador de vibração na descarga,depósito de líquido com válvula desegurança e válvula de saída (tambéminclui válvula de entrada em depósitossuperiores a 15dm3) e tubagem deinterligação compressor-condensador-depósito.
FORNECIMENTO EXTRASob pedido os grupos também podem serfornecidos com outros acessórios apedido do cliente.
STANDARD DELIVERYSteel frame, condenser, compressor withester oil and crankcase heater, dischargevibration eliminator, liquid receiver withpressure relief valve and outlet shut-offvalve (also inlet shut-off valve for receiverswith more then 15dm3), compressor-condenser-receiver piping connections.
EXTRA DELIVERYUnder customer request all condensingunits can also be supplied with otheraccessories.
68 TGC 2012/0
COMPRESSORES COMPRESSORSGRUPOS CONDENSING UNITS
DEPÓSITOS DE LÍQUIDOLIQUID RECEIVERS
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
COMP
RESS
ORES
C
OMPR
ESSO
RSGR
UPOS
C
ONDE
NSIN
G UN
ITS
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
TGC 2012/0 69
70 71 PÁGINASPAGES
Válvulas de seccionamento na entrada e saída Inlet and outlet shut-off valvesVálvula de segurança (1 válvula até 90dm3, 2 válvulas para capacidades superiores) Safety valve (1 valve for capacities up to 90dm3, 2 valves for bigger capacities)Válvula de 3 vias (para capacidades superiores a 90dm3) 3-way valve (for capacities above 90dm3)Visores circulares na virola Sight glassesLigação para alarme de mínimo (alarme de mínimo não incluido) Minimum level control connection (minimum level control not included)
Pressão máxima: 32bar Maximum pressure: 32barMaterial: aço Material: steelFluidos: refrigerantes grupo II Fluid: refrigerantes grupo IIInterior inspeccionado, limpo e desengordurado Inspected interior, cleaned and degreassedPintura exterior Exterior paintedEntregue seco e com tampas de plástico nas válvulas de seccionamento Delivered dry and with shut-off valves covered with plastic lids
490
503503705
357357
240
503503
240240
490490
340340340490
CRH-30CRH-20Horizontais Horizontal
4001 3/8'' 1 1/8'' 3/8''
190 300 140
370
600 300 350 190 200 200900
600 170
250800 550 300 370
250170
CRH-500
8001200CRH-60 273
CRH-45
CRH-180CRH-150CRH-120CRH-90
1750 1200 400 260
340 140
DEPÓSITOS LÍQUIDO LIQUID RECEIVERSHorizontais e Verticais Horizontal and Vertical
COMPRESSORES COMPRESSORS
Mode
loTy
pe
Preç
oPr
iceDe
pósit
o líqu
idoLiq
uid re
ceive
r
Dime
nsõe
sDi
mens
ions
dm3 in inØ G
inGRUPOS CONDENSING UNITS
EUR
3/8'' 273 1780
Verticais Vertical
DEPÓSITOS LÍQUIDO LIQUID RECEIVERS
CRV-40
CRV-150CRV-120CRV-90
CRV-500
CRV-300CRV-250
CRV-350
H
1 5/8'' 1 3/8'' 2 x 1/2''
2191 1/8'' 7/8'' 1/4'' 2193/4'' 5/8''
370 170220
1 1/8'' 7/8'' 3/8'' 219 350 190
1 3/8'' 1 1/8''220
400
Válvu
la en
trada
Inlet
valve
A B C D F
CRV-60
500
CRV-20
4060
406
2 x 3/4" 610
180150
250300350
20
CRH-350CRH-300
1 5/8'' 1 3/8'' 2 x 3/4" 406 1330
70 TGC 2012/0
CRH-250
90
300350
CRV-180
500
120150180250
1 3/8''
135
490
1500200 300
3103" 2 1/2"
Capa
cidad
eCa
pacit
y
Válvu
la se
gura
nça
Safet
y valv
e
Válvu
la sa
ídaOu
tlet v
alve
30456090
120
2 1/8'' 1 5/8'' 2 x 3/4" 406 1580 9002 1/8'' 1 5/8'' 2 x 3/4"
1/4''
3/4'' 5/8'' 1/4" 219 600 570
2170 1100
310550
3102 1/2" 2 1/8'' 2 x 3/4" 406 2310 1800 550 3002 1/2" 2 1/8'' 2 x 3/4" 406 2980
70 3001 3/8'' 1 1/8'' 3/8'' 273 1200 1170 30 1701 1/8'' 7/8'' 3/8'' 273 725 695 30 120
300951 1/8'' 1/2'' 324 1282 1270 12 60 260 400
160 70
4001 5/8'' 1 3/8'' 2 x 3/4" 324 2000 1970 30 160 85 4001 5/8'' 1 3/8'' 2 x 1/2'' 324 1750 1720 30 160 85
508 1630 1600 30 143 68
5502 1/8'' 1 5/8'' 2 x 3/4" 457 1785 1750 35 50 235 5502 1/8'' 1 5/8'' 2 x 3/4" 406 1610 1580 30
22 73 273
5502 1/2" 2 1/8'' 2 x 3/4" 508 1820 1800
3" 2 1/2" 2 x 3/4" 610 1786 1764 55055020 143 68
2 1/2" 2 1/8'' 2 x 3/4"
CRV-302403008520 30
700 400 710
300606502731/4"7/8''1 1/8''30
1764 1100
620 30 70
ACCORDING TO PRESSURE EQUIPMENT DIRECTIVE 97/23/CE
STANDARD SUPPLYFORNECIMENTO BASE
DE ACORDO COM A DIRECTIVA DE EQUIPAMENTOS DE PRESSÃO 97/23/CE
300
mm
422324
300600
300 710
1350
550 300 710370
300350500
503170550 300
VÁLVULA SAÍDAOUTLET VALVE
VISOR DE LÍQUIDOLIQUID SIGHT GLASS
VÁLVULA ENTRADAINLET VALVE
VÁLVULA(S) DE SEGURANÇASAFETY VALVE(S)
VÁLVULA SAÍDAOUTLET VALVE
VÁLVULA ENTRADAINLET VALVE
VÁLVULA(S) DE SEGURANÇASAFETY VALVE(S)
IMPORTANTE: Para circuitos com muito comprimento de tubagem, evaporadores inundados, o volume do depósito deve ser seleccionado de acordo com a quantidade derefrigerante necessário.O volume interno do depósito deve permitir recolher a totalidade do refrigerante no estado líquido. Nesta situação o referido refrigerante deve ocupar 80% dovolume total do depósito. Para mais informação deveá contactar a Centauro.
Os gráficos são orientativos. Na prática os cálculos do volume da instalação permitirão quantificar o volume de refrigerante no estado líquido que pode ser"puxado" ao depósito. Este volume deverá representar no máximo 80% do volume interno do depósito.
IMPORTANT: For refrigerantion circuits with widely branched pipework and flooded evaporators: Select the liquid receiver according to the quantity of refrigerant required.The liquid receiver internal volume must alow the storage of the entire refrigerant in liquid state. In this situation the refrigerant should ocupy 80% of the totalinternal receiver volume. For more information please contact Centauro.
Graffics are orientational and usefull for a quick solution. On final design the total volume of liquid refrigerant pulled back into the liquid receiver must occupy amaximum of 80% of it's volume.
TGC 2012/0 71
DEPÓ
SITO
S LÍ
QUID
O
LIQU
ID R
ECEI
VERS
GRUP
OS
CON
DENS
ING
UNIT
SCO
MPRE
SSOR
ES
COM
PRES
SORS
Factores de correcçãoCorrection factors
R404A f=1,4R134a f=1,1R22 f=1,0
mrefrigerante x peso específico (líq.)0,8
V depósito =
mrefrigerant x specific weight (liq.)0,8
V receiver =
72 TGC 2012/0
TGC 2012/0 73
74 TGC 2012/0
CONDIÇÕES E TERMOS GERAIS DE FORNECIMENTO
FORNECIMENTO SUPPLY
Artigo 1º - Geral1 - As presentes condições gerais, constantes nas tabelas de preços, aplicam-se a todas as propostas, contratos de vendae serviços prestados pelas Empresas:CENTAURO (Portugal) - S.G.P.S.,S.A - Zona Industrial - Lote Q-9 - Apartado 1001 - 6001-997 Castelo Branco, Portu-gal.Matriculada na Cons. do Reg. Com. Castelo Branco sob o N.º 1170/920310. Pessoa Colectiva nº 502 842 326.Castanheira Henriques & C.ª, L.da - Zona Industrial, Lote Q-9, Apartado 181 - 601-997 Castelo Branco, Portugal.Matriculada na Cons. Reg. Com. Castelo Branco sob o n.º 481. Pessoa Colectiva nº 500785317. Produtor Registado n.º060/76 - CAE N.º 29230.Centauro Internacional - Trocadores de Calor, L.da. Zona Industrial, Lote Q-9, Apartado 1001. 6001-997 Castelo Branco.Sociedade por quotas - Matriculada na Conservatória do Registo Comercial de Castelo Branco sob o n.º 993/900404.Pessoa Colectiva com o Nume-ro fiscal 502 352 426.Brisa Nova - Trocadores de Calor, L.da., Rua Heróis do Dembo, D-1 a D-3. Bairro de Angola - Camarate. 2685 - 459Sacavém - Portugal. Sociedade por quotas. Contribuinte n.º 502 392 185. CAE N.º 51650. Registada na Conservatória doRegisto Comercial de Loures, sob o n.º 7860/900411, a seguir genericamente definidas como "Centauro".2 - As vendas, entregas e outros serviços da Centauro serão executados, exclusivamente, em conformidade com aspresentes condições e termos gerais de venda e fornecimento, a seguir designadas por "Condições Fornecimento",aplicando-se ainda a todas as futuras transacções comerciais com o cliente.3 - Se por decisão judicial alguma(s) das cláusulas das presentes condições de fornecimento ou de algum contratoelaborado com base nas mesmas forem consideradas "não válidas", este facto não afectará as restantes cláusulas desdeque tal não conformidade à lei não afecte a essência do contrato e desde que a Centauro aceite a alteração da(s) cláusula(s) em causa por outra(s) enquadrada(s) no direito aplicável.4 - As presentes condições de fornecimento são consideradas aceites pelo cliente desde que o mesmo coloque umaencomenda à Centauro ou aceite um seu fornecimento, renunciando a eventuais condições que possam existir da sua partedesde que não formalmente aceites por escrito pela Centauro, aplicando-se assim a todos os contratos.5 - As alterações a estas "condições gerais de fornecimento" só serão válidas se acordadas previamente, por escrito, entrea Centauro e o cliente, sendo as modificações apenas aplicáveis ao contrato em causa.Artigo 2º - Propostas e Contratos / Celebração do Contrato1 - As propostas emitidas pela Centauro não a obrigam a qualquer acção ou compromisso, salvo se expressamente referidonas mesmas. Todas as propostas estarão baseadas na execução das encomendas sob condições normais e no horárionormal de laboração.2 - Todas as encomendas colocadas à Centauro serão consideradas irrevogáveis, a menos que a Centauro se recuse aaceitar as mesmas.3 - O contrato entra em vigor com a aceitação da encomenda do cliente por parte da Centauro e será regido pelos termosde aceitação da encomenda e pelas presentes condições de fornecimento.Artigo 3º - Prazo de Entrega1 - A Centauro fornecerá os produtos ou serviços encomendados no prazo especificado na confirmação da encomenda. ACentauro deverá informar o cliente em caso de atraso no cumprimento do prazo estipulado, não podendo o cliente, a menosque expressamente acordado por escrito entre ambas as partes, reclamar qualquer tipo de indemnização por danosdecorrentes do atraso no fornecimento.2 - Caso o atraso seja superior a 6 meses por motivos imputáveis à Centauro e não referidos no artigo 5º, poderá o clienterescindir o contrato mediante comunicação escrita à Centauro. O direito de rescisão aludido não abrange a parte daencomenda pronta ou em fase de acabamento, cujo recebimento não pode ser recusado, sendo o seu pagamento devido àCentauro numa base de proporcionalidade.3 - O prazo de entrega conta a partir da formalização do contrato e depois de serem colocados à disposição da Centaurotodos os dados, documentos, licenças ou similares necessários para a execução do trabalho e terem sido efectuados ospagamentos nos prazos acordados.4 - Caso a Centauro aceite a suspensão temporária de uma encomenda a pedido do cliente, a Centauro indicará outroprazo de acordo com os prazos à data em vigor para produtos similares. Quaisquer custos extras decorrentes dasuspensão serão suportados pelo cliente.5 - O fornecimento considera-se sempre efectuado quando os produtos encomendados forem disponibilizados paraembarque.6 - Se a encomenda referir entregas parciais, então cada entrega será considerada um fornecimento separado para todosos efeitos legais, devendo ser facturado e pago individualmente.7 - A Centauro está autorizada a suspender o cumprimento das obrigações decorrentes do contrato se, após a suaconcretização, receber informações que levem a crer não poder o cliente cumprir as suas obrigações.Artigo 4º - Local de EntregaO fornecimento será entregue à porta da fábrica / armazém, a menos que acordado de forma diferente e por escrito porambas as partes.Artigo 5º - Força Maior1 - Se a execução do "contrato de fornecimento" for dificultada por motivos de força maior por parte da Centauro ou dosseus fornecedores, a Centauro pode suspender as suas obrigações contratuais. O prazo de entrega/fornecimento seráadiado por tempo igual ao atraso ocasionado pelos motivos de força maior sem que haja lugar ao pagamento de qualquerindemnização ao cliente por parte da Centauro.2 - Neste contexto entende-se "por força maior" todas as circunstâncias em virtudes das quais não possa exigir-se àCentauro, numa base de razoabilidade e justeza, o cumprimento a tempo do contrato. Entre estas circunstâncias estãoconsideradas as que decorram da intervenção de terceiras pessoas e que não possibilitem à Centauro conseguir ainformação essencial para a execução do contrato, assim como situações tais como guerra, perigo de guerra, desordenspúblicas, revoluções, pirataria, sabotagem, terrorismo, desastres naturais (tempestades, ciclones, terramotos, inundações)danos causados por água ou raios, explosões, incêndio, desordem laboral, destruição das máquinas ou da fabrica ou outrasinstalações, boicotes, ocupação da empresa, greves, medidas tomadas pela autoridade, obstruções à importação ouexportação, escassez ou atraso de entrega de matérias-primas, materiais ou componentes encomendados pela Centauro,falhas de energia, falta significativa de empregados ou paralisação do trabalho ocasionado por condições ambientais ououtras não relacionadas com a Centauro. Nesta conformidade e quer estas circunstâncias possam ou não ser previsíveis,não se poderá exigir à Centauro o cumprimento do prazo acordado.3 - A Centauro poderá rescindir o contrato sempre que constate que, devido a motivos de força maior, não será possívelcumprir as suas obrigações para com o cliente, sem que este tenha direito a qualquer tipo de indemnização, apesar de ter aobrigação de comprar e pagar à Centauro as matérias-primas, materiais e componentes da encomenda que se encontremprontos e/ou sejam susceptíveis de fornecimento autónomo. Caso o cliente não assuma esta responsabilidade a Centauroterá o direito de armazenar ou vender os bens, por conta e risco do primeiro.Artigo 6º - Preço1 - Caso não tenham sido acordados e confirmados por escrito outros preços, então o preço vigente será o constante databela de preços Centauro à data do fornecimento.2 - A menos que se indique o contrário na proposta ou na encomenda, os preços serão à porta de fábrica / armazém, a queacrescerão os impostos comerciais (IVA entre outros) bem como custos de embalagem especial, manuseamento de cargas,contentores, transportes ou custos adicionais.Artigo 8º - Envio1 - O transporte e seguro são sempre de conta e risco do cliente, a menos que tenham sido acordadas entre as partes, porescrito, outras condições.2 – Considera-se o fornecimento efectuado mesmo que a Centauro disponibilize ao cliente transporte gratuito, sendo que,em caso de ocorrência de acidente, qualquer indemnização devida ao cliente terá sempre como limite o valor recebido daparte da seguradora da Centauro, apenas lhe sendo exigível após a sua percepção efectiva.3 - Se o cliente não recolher ou se recusar a receber os produtos encomendados, a Centauro terá liberdade para armazenaros produtos por conta e risco do cliente e exigir-lhe que pague os gastos e danos daí decorrentes.4 - Sempre que o cliente não proceda à recolha ou mantenha a recusa em receber o material encomendado por um prazosuperior a 30 dias, ficará obrigado a indemnizar a Centauro em montante equivalente a uma vez e meia o valor defacturação da mercadoria e de todas as despesas de transporte e armazenagem. Nesta eventualidade, decorrido o prazode mais 30 dias a Centauro terá direito de comercializar livremente as mercadorias pelo preço e condições que entender,sendo o montante obtido deduzido no montante da indemnizaçãoArtigo 9º - Documentação Técnica1 - Os desenhos, projectos, modelos protótipos, diagramas, direitos de autor, marcas e patentes, software e similares sãopropriedade da Centauro e não poderão, sem o seu consentimento escrito, ser copiados, imitados, entregues a terceiraspessoas ou, total ou parcialmente, expostos. O cliente não poderá reclamar qualquer direito sobre eles, a menos que aCentauro tenha acordado explicitamente algo diferente na confirmação de aceitação da encomenda.2 – A Centauro manterá ainda os direitos de autor de todas as soluções de engenharia de produtos fora de catálogodesenvolvidas a pedido do cliente, excepto se o contrário for convencionado por escrito, apenas podendo ser pedida a suafabricação a terceiros depois de autorização escrita.
3 - Caso o cliente entregue as suas próprias especificações de fabrico, desenhos ou protótipos juntamente com aencomenda, então assumirá todas as responsabilidades pelo facto de a fabricação e fornecimento dos produtos,respectiva marca e patente, não prejudicar os direitos de terceiras pessoas. Caso uma terceira pessoa se oponha àfabricação pela Centauro dos referidos produtos, a Centauro poderá cancelar imediatamente a produção e fornecimento,sem ficar obrigada a pagar quaisquer indemnizações ao cliente. O cliente libertará a Centauro de eventuais reclamaçõesrelativamente a terceiros e respeitará o direito da Centauro em pedir compensação pelos gastos, sem prejuízo do direitode recurso ao pedido de indemnização total, o qual lhe assistirá sempre.Artigo 10º - Pagamento1 - A menos que tenham sido acordadas por escrito outras condições de pagamento, contra a entrega do equipamento ocliente deverá pagar total e imediatamente à Centauro os valores em dívida - sem desconto ou qualquer tipo decompensação - tendo todas as facturas vencimento na data da sua emissão.A Centauro considera que o pagamento está efectuado na data em que o valor do mesmo tenha sido creditado numa dassuas contas bancárias.2 - Os eventuais direitos de garantia não eximem o cliente das suas obrigações em termos de pagamentos à Centauro,apenas sendo relevantes as reclamações do cliente devidamente comunicadas por escrito.3 - Caso o cliente não pagar no prazo acordado entrará imediatamente em mora sem necessidade de reclamação ouinformação por parte da Centauro, pelo que será aplicado ao valor da factura em atraso o juro correspondente à taxalegal em vigor.4 - Todos os custos de cobrança, judicial ou extra judicial, serão por conta do cliente, incluindo os gastos com entidades aque a Centauro tenha solicitado a cobrança. Estes gastos serão automaticamente debitados ao cliente sem qualqueroutra justificação por parte da Centauro se não ultrapassarem 15% do valor em dívida. Poderá ainda a Centauro, em casode atraso de pagamento, debitar ao cliente os custos cambiais calculados desde a data de vencimento.5 - Caso o cliente não cumpra as condições de pagamento, a Centauro pode de imediato reclamar o valor total da vendacom atraso de pagamento por parte do cliente, independentemente do atraso de fabricação. Poderá também a Centauroreclamar o pagamento imediato e adiar ou cancelar outras encomendas aceites, sem que possa ser-lhe exigido pelo factoqualquer indemnização ou compensação.6 - Os pagamentos à Centauro destinar-se-ão primeiro a cobrir os juros, depois os gastos e só depois o valor da facturade fornecimento.7 - Em caso de incumprimento das condições de pagamento serão anulados todos os descontos constantes da factura.Artigo 11º - Rescisão1 - Se o cliente não cumprir uma ou mais obrigações, não as cumprir no prazo ou não as cumprir completamente, falecerou for declarado em falência ou em suspensão de pagamentos ou recuperação de empresa, vender a sua empresa, forsubmetido a controle ou tutela legal, também se todos ou alguns dos seus produtos sejam embargados ou se fordeclarado insolvente de qualquer forma, a Centauro pode rescindir unilateralmente o contrato na parte ainda nãocumprida, sem qualquer intervenção legal. A Centauro poderá ainda retomar os produtos entregues mas não pagos oususpender a execução do contrato pelo período que entender.2 - Em todos os casos mencionados no número anterior será obrigatoriamente devida indemnização à Centaurorelativamente à parte da encomenda não fornecida, a qual nunca poderá ser inferior a 50% do preço acordado, semprejuízo de a Centauro poder reclamar indemnização total sempre que a natureza do fornecimento assim o justifique.3 - O cliente obriga-se, nestas condições, a libertar a Centauro de eventuais reclamações de terceiros por força derescisão do contrato.4 - A Centauro apenas é responsável, perante o cliente, pelas indicações, capacidades, prestação e dados técnicos seespecificados por escrito. Desvios menores das tolerâncias usuais e razoáveis não dão o direito ao cliente de apresentarreclamações, rejeitar os produtos, solicitar a substituição dos equipamentos, solicitar a rescisão de contrato ou pedirindemnização por danos.Artigo 12º - Responsabilidade1 - A Centauro é responsável legal por qualquer defeito existente nos seus produtos à data da transferência de risco oupelos danos daí decorrentes, a menos que:a) o produto não tenha sido colocado em circulação (protótipos cedidos ou vendidos nessa qualidade);b) o defeito seja consequência da observância de requisitos especiais do cliente ou o fornecimento seja feito comreservas, como tal aceites pelo cliente;c) o estado da técnica não permita descobrir o referido defeito;d) o cliente tenha recomendado e ou fornecido certos materiais ou instalações que possam causar o referido defeito;e) – sejam consequência de aplicação sem respeito pelas especificações técnicas do fabricante ou as boas regras daarte.2 - A Centauro não será considerada responsável por partes ou componentes Centauro incorporados em produtos quenão tenham sido comercializados pela Centauro como "produto acabado".3 - A Centauro não será considerada responsável por danos de qualquer tipo que se produzam nos produtos posse docliente em resultado da execução de trabalhos que lhe tenham sido encomendados a menos que exista dolo, negligênciaou culpa grave. Esta exclusão de responsabilidade aplica-se ao cliente, aos seus empregados e a terceiros, ficando ocliente obrigado a libertar a Centauro de todas as reclamações apresentadas sobre o assunto por terceiras pessoas.4 - No contexto do referido no ponto anterior a Centauro não pode ser considerada responsável, a qualquer nível, pordanos ou perda de material disponibilizado pelo cliente, sendo sempre o transporte dos referidos materiais de conta erisco do cliente.5 - Quando haja lugar a indemnização a mesma consistirá na reparação do produto fornecido ou em termos financeiros,conforme opção da Centauro, a qual não será responsável por danos de terceiras pessoas ou danos indirectos, incluindocompensação por líquido refrigerante (fluidos frigoríficos primários e secundários). Em nenhum caso a indemnizaçãopoderá ser superior ao valor da encomenda correspondente.6 - São da responsabilidade do cliente todas as reclamações decorrentes do fornecimento pelo cliente dos produtosCentauro a terceiros (tendo a Centauro sempre direito de regresso de todas as quantias pagas), com excepção dasresponsabilidades decorrentes de normas legais sobre responsabilidade do produto.7 - Sempre que se verifique qualquer situação potencialmente geradora de dano, o cliente é obrigado a tomar medidaspara limitar ao máximo os prejuízos, ficando responsável perante a Centauro e terceiros pelo resultado de qualquerconduta omitida.Artigo 13º - Garantia1 - Aplica-se a todos os produtos fornecidos pela Centauro a garantia Centauro, que assegura que os mesmos sãoentregues sem defeitos de fabrico e com as características acordadas. Não se dará garantia a defeitos imputáveis ànatureza ou qualidade dos materiais utilizados, que sejam total ou parcialmente consequência de um qualquerregulamento administrativo. Os defeitos nos produtos fornecidos que sejam consequência directa de um erro deconcepção, construção ou montagem da Centauro ou decorram do uso de materiais defeituosos serão reparados esubstituídos pela Centauro, se o cliente puder evidenciar que os defeitos se manifestaram no prazo de doze mesesposteriores à posta em marcha do equipamento ou no máximo 18 meses depois do fornecimento. O cliente fica obrigadoa informar a Centauro imediatamente e por escrito de quaisquer defeitos e de devolver à Centauro com portes pagos oscomponentes ou produtos defeituosos, comprometendo-se igualmente a tudo fazer para limitar os danos. A garantiaconsiderar-se-á nula caso seja verificada uma das seguintes situações:- O cliente fizer ou permitir alterações aos equipamentos entregues sem autorização da Centauro;- O cliente não tiver respeitado as informações ou instruções disponibilizadas pela Centauro;- Se os equipamentos forem usados para uma finalidade diferente daquela para que foram encomendados.A garantia considerar-se-á ainda nula se o objecto do fornecimento for entregue pelo cliente a outro país que não oreferido na factura de fornecimento.2 - Caso a pedido do cliente se forneçam materiais ou produtos usados não haverá garantia, a menos que tal sejaacordado por escrito. Caso o cliente entregue componentes seus para montagem nos produtos Centauro, a Centauro sódará garantia no que respeita à montagem.3 - A alegação de não conformidades de cumprimento de obrigações no que concerne a garantias, não exime o cliente dointegral cumprimento do contrato celebrado.4 - A Centauro não será responsável pelos erros, defeitos, deficiências e avarias decorrentes de manuseamento indevidodos equipamentos por parte do cliente, seus empregados ou terceiros, por deficiente instalação, técnica de controlo oumanutenção dos seus produtos, se não forem respeitadas as especificações técnicas fornecidas pelo fabricante, por usoe desgaste normal decorrentes do funcionamento ou por condições deficientes de alimentação de corrente eléctrica,devendo ser fornecidos à Centauro os necessários registos sob pena da sua completa desresponsabilização. O mesmose aplicará caso o cliente, seus empregados ou terceiros procedam a intervenções nos equipamentos durante a validadeda garantia sem autorização escrita da Centauro.5 - Todas as reclamações relativas a defeitos dos produtos que sejam directamente visíveis ou identificáveis deverão sercomunicadas de imediato (máximo de 5 dias úteis) à Centauro por escrito acto contínuo à recepção dos equipamentos,sem o que não será considerado qualquer direito a reclamação contra a Centauro.Artigo 14º - Contencioso e Legislação AplicávelAo contrato com o cliente aplicar-se-á exclusivamente a legislação portuguesa. Para a resolução de todos os litígiosemergentes do contrato será competente o Tribunal do foro da Comarca de Castelo Branco, com exclusão expressa dequalquer outro.
TGC 2012/0 75
GENERAL TERMS AND CONDITIONS OF SUPPLYArticle 1 - General1 – These present general conditions, set out in the price lists, are applicable to all offers, sales contracts and servicesprovided by the following companies:CENTAURO (Portugal) – S.G.P.S., SA, Zona Industrial – Lte Q9 – Apartado 1001 – 6001-997 Castelo Branco, Portugal,registered at the Castelo Branco Registry of Companies under nº 1170/920310, VAT nº 502 842 326;Castanheira Henriques & Cª Ldª, Zona Industrial – Lte Q9 – Apartado 181 – 6001-997 Castelo Branco, Portugal, registeredat the Castelo Branco Registry of Companies under nº 481, VAT nº 500 785 317, Registered Producer nº 060/76 – NACE n.º29230;Centauro Internacional – Trocadores de Calor, Ldª, Zona Industrial – Lte Q9 – Apartado 1001 – 6001-997 Castelo Branco,Portugal, registered at the Castelo Branco Registry of Companies under nº 993/900404, VAT nº 502 352 426;Brisa Nova – Trocadores de Calor, Ldª, Rua Heróis do Dembo, D1-D3, Bairro de Angola, Camarate, 2685-459 Sacavém,VAT nº 502 392 185, NACE nº 51650, registered at the Loures Registry of Companies under nº 7860/900411,hereunder known generally as “Centauro;2 – Centauro’s sales, deliveries and other services shall be carried out exclusively in accordance with the general terms andconditions of sale and supply, hereinafter known as “Conditions of Supply”, which shall also apply to all future commercialtransactions with customers.3 – If by decision of the courts any of the clauses of the present Conditions of Supply or of any contract drawn up on thebasis hereof come to be considered “not valid”, such a decision shall not affect the remaining conditions, provided that suchnon-conformity with the law does not affect the essence of the contract, provided always that Centauro accepts thereplacement of the clause or clauses in question by others in keeping with applicable law.4 – These present Conditions of Supply shall be deemed accepted by the customer provided that the customer places anorder with Centauro or accepts a supply from Centauro, renouncing such conditions as the customer itself may have that arenot formally accepted in writing by Centauro, and shall thus apply to all contracts.5 – Alterations to these General Conditions of Supply shall be valid only if agreed in writing in advance by Centauro and thecustomer, such alterations to apply only to the contract in question.Article 2 – Offers and contracts / closing the contract1 – Offers made by Centauro do not bind it to any action or commitment unless expressly stated therein. All offers shall bebased on execution of orders under normal conditions and during normal working hours.2 – All orders placed with Centauro shall be considered irrevocable, unless Centauro refuses to accept them.3 – The contract takes effect on acceptance by Centauro of the customer’s order and shall be governed by the terms ofacceptance of the order and by these present Conditions of Supply.Article 3 – Delivery dates1 – Centauro shall supply the products or services ordered by the deadline specified on the order confirmation. Centauroshall inform the customer in the event of delay to compliance with stipulated delivery date, and unless expressly agreed inwriting between both parties, the customer may not claim any kind of indemnity or damages arising from the delay to thesupply.2 – Should the delay be of more than 6 months for reasons attributable to Centauro other than those referred to in Article 5,the customer may terminate the contract by means of written communication addressed to Centauro. The said right totermination does not cover that part of the order ready or at the finishing stage, which cannot be refused, and paymentthereof shall be owed to Centauro on a proportional basis.3 – The delivery date is reckoned as from the moment of formalisation of the contract and after all the data, documents,licences or similar items required to execute the work have been provided to Centauro and after the payments have beenmade by the agreed dates.4 – In the event that Centauro accepts temporary suspension of an order at the request of the customer, Centauro shallindicate another delivery date in accordance with delivery dates then current for similar products. Any additional costs arisingfrom the suspension shall be borne by the customer.5 – The Supply shall be considered as having been made when the products ordered are ready for shipment.6 – If the order calls for partial deliveries, then each delivery shall be considered as a separate supply for all legal intents andpurposes, and shall be invoiced and paid individually.7 – Centauro is authorised to suspend compliance with the obligations arising from the contract provided that, following itsformalisation, it receives information leading it to believe that the customer cannot meet its obligations.Article 4 – Place of deliveryThe Supply shall be made at the factory / warehouse gate unless otherwise agreed in writing by both parties.Article 5 – Force majeure1 – In the event that the execution of the supply contract is hindered by force majeure affecting Centauro or its suppliers,Centauro may suspend its contractual obligations. The delivery/supply date shall be postponed by a period of time equal tothe delay caused by the force majeure, no payment of any indemnity by Centauro being due to the customer.2 – In this connection “force majeure” is understood to be any circumstance by virtue of which Centauro cannot reasonablyand fairly be required to comply with the contract in due time. Such circumstances are considered to include those arisingfrom third-party intervention preventing Centauro from obtaining information essential to the execution of the contract, as wellas situations such as war, danger of war, public disorder, revolutions, piracy, sabotage, terrorism, and natural disasters(storms, cyclones, earthquakes, floods), damage caused by water or lightning, explosions, fire, labour disorder, destruction ofmachinery, factory or other installations, boycotts, occupation of the company, strikes, measures taken by the authorities,obstruction to imports or exports, scarcity or delays to the delivery of raw materials, materials or components ordered byCentauro, power outages, significant shortage of employees or stoppage of work caused by weather conditions or otherconditions not related with Centauro. Accordingly, whether such circumstances may be predictable or not, Centauro cannotbe required meet the agreed delivery dates.3 – Centauro may terminate the contract in the event that it finds that, owing to force majeure, it will be unable to meet itsobligations towards the customer, and the latter shall not be entitled to indemnity of any type, despite being obliged to buyfrom and pay to Centauro the raw materials, materials and components of the order that are ready and/or are capable ofbeing supplied autonomously. Should the customer not assume this responsibility, Centauro shall be entitled to store or tosell the goods for and on behalf of the customer.Article 6 – Price1 – In the event that other prices shall not have been agreed and confirmed in writing, the ruling price shall be that set out inthe Centauro pricelist on the date of supply.2 – Unless otherwise indicated in the offer or in the order, prices shall be at the factory / warehouse gate and shall be subjectto commercial taxes (VAT, among others) and to costs of special packing, cargo handling, containers and transport oradditional costs.Article 7 – Transmission of risk and ownership reservation1 – Products supplied by Centauro shall continue to be its property until such time as the customer shall have met all itsfinancial obligations towards Centauro stemming from the contract entered into by the parties, including interest and bankcharges.2 – Transfer of the risk to the customer is automatic, taking place on formal communication to the customer of the readinessfor delivery of the object of the supply, or on its delivery to the transportation company or the customer.3 – Without prejudice to Centauro's other rights, Centauro shall have ownership reservation over all materials and equipmenttransacted up to the time of their full payment, the customer granting Centauro irrevocable power to repossess, withoutjudicial intervention, the products supplied by it or to dismantle them and repossess them in the event of being installed inimmovables or in a movable, provided that customer shall not meet its obligations in terms of timely payment.4 – In the event that the legislation of the customer's country is contrary to the application of the provisions of number 2 ofthis article, the customer shall have due regard for the rights indicated by Centauro or that can be claimed under the laws ofthe country in question.5 - The customer is obliged to provide such support as may be necessary for Centauro be able to exercise its rights as statedin number 3 of this article.6 – Should Centauro so require, the customer shall be obliged to provide sufficient guarantee to ensure compliance with itsobligations, in a form acceptable to Centauro. In this case right of ownership of the products shall be transferred to thecustomer as soon as the guarantee is provided.7 – In the event of Centauro exercising its ownership reservation right it cannot be required to pay any indemnity for anylosses or loss of profits resulting from the repossession measures and from the possible dismantling of the equipmentsupplied.Article 8 – Dispatch1 – Transport and insurance shall be for the account and at the risk of the customer, unless the parties shall have agreedother conditions in writing.2 – The Supply shall be considered as having been made even if Centauro provides the customer with free transport, and, inthe event of any accident, the limit of any indemnity owed to the customer shall be the value received from Centauro'sinsurer, which can be demanded only following its actual receipt.3 – In the event that the customer does not pick up refuses to receive the products ordered Centauro shall be free to storethe products for the account and at the risk of the customer and to demand that the customer pay the costs and damagesarising therefrom.4 – In the event that the customer does not collect or continues to refuse to receive the material ordered during a period ofmore than 30 days, it shall be obliged to indemnify Centauro in a sum equivalent to one and a half times the value of themerchandise invoiced and of all transport and storage costs. In this case, after more than 30 days have passed, Centauroshall be entitled to freely sell the merchandise for such price and other conditions as it may deem fit, the amount obtainedbeing deducted from the amount of the indemnity.
Article 9 – Technical documentation1 – Drawings, designs, prototype models, diagrams, copyright, brands and patents, software and similar items are theproperty of Centauro and may not, without its written consent, be copied, imitated, delivered to third parties or totally orpartially displayed. The customer may not claim any right over them unless Centauro shall have explicitly agreed otherwise inits confirmation of acceptance of the order.2 – Centauro shall retain copyright over all product engineering solutions not included in its catalogue, developed at therequest of the customer, unless otherwise agreed in writing, and manufacture of the items in question may only be requestedof third parties after written authorisation has been obtained.3 – In the event of the customer handing over its own manufacturing specifications, drawings or prototypes together with theorder it will be responsible for ensuring that the manufacture and supply of the products, their respective brands and patents,do not affect the rights of third parties. Should a third party oppose the manufacture by Centauro of the said products,Centauro may immediately cancel production and supply without being obliged to pay any indemnity to the customer. Thecustomer shall release Centauro from any claims made by third parties and shall have due regard for Centauro's right todemand compensation for costs incurred, without prejudice to the right of recourse to full indemnity, a right to which it shall beentitled at all times.Article 10 – Payment1 – Unless other payment conditions shall have been agreed in writing, the customer shall pay amounts owed to Centauro infull immediately – with no discount or other type of compensation – all invoices falling due on the date of their issue.Centauro considers that payment has been made on the date on which the respective value has been credited to one of itsbank accounts.2 – Any existing warranty rights shall not exempt the customer from its obligations in terms of payments to Centauro, and onlycustomer complaints duly communicated in writing shall be considered relevant.3 – In the event of the customer not paying by the agreed deadline it shall immediately be in default with no need for any claimor information by Centauro, and for this reason default interest shall be applied to the value of the outstanding invoice at thelegally prevailing rate.4 – All costs incurred with collection, through the court or otherwise, shall be for the account of the customer, including costsincurred with entities requested by Centauro to make the collection. Such costs shall automatically be debited to the customerwith no other justification by Centauro provided they do not exceed 15% of the amount in debt. In the event of late payment,Centauro may also debit the customer for any foreign exchange costs calculated as from the maturity date5 – In the event of the customer not meeting the payment conditions, Centauro may immediately claim the full value of thesale in respect of which payment by the customer is overdue, regardless of any manufacturing delay. Centauro may alsodemand immediate payment and postpone or cancel other orders accepted, and for this fact no indemnity or compensationmay be demanded of it.6 – Payments to Centauro shall in the first place be set off against interest, next against expenses, and only then against thevalue of the Supply invoice.7 – In the event of non-compliance with the payment conditions any discounts shown on the invoice shall be cancelled.Article 11 – Termination1 – In the event of the customer not meeting one or more obligations, not complying with them by the deadline or not
complying with them completely, in the event of his/her decease or of declaration of bankruptcy, sale of the company, beingsubmitted to legal control or oversight, and also in the event of some or all the products being seized, or if it is declared in anyway insolvent, Centauro may unilaterally terminate the contract in that part not yet fulfilled, with no legal proceedings of anysort. Centauro may also repossess those products delivered but not paid for or suspend execution of the contract for suchtime as it may deem fit.2 – In all the cases mentioned in the foregoing number indemnity shall be due to Centauro in respect of that part of the ordernot supplied, though never less than 50% of the agreed price, without prejudice to Centauro are being able to claim fullindemnity provided the nature of the supply so warrants.3 – Under these conditions the customer undertakes to release Centauro from any claims by third parties stemming fromtermination of the contract.4 – Centauro is responsible towards the customer only for the indications, capacities, provision and technical data specified inwriting. Customary and reasonable minor tolerance deviations shall not entitle the customer to submit claims, reject products,request replacement of equipment, request termination of the contract or request indemnity for damages.Article 12 – Liability1 – Centauro is legally liable for any defect existing in its products as of the date of the transfer of the risk and for damagesarising therefrom, unless:the product shall not have yet been put on the market (prototypes assigned or sold as such);the defect stems from observance of special requirements of the customer or if the supply is made with reservations, acceptedas such by the customer;it is technically impossible to discover the defect in question;the customer shall have recommended and/or supplied certain materials or installations that could cause the said defect; andthey are the consequence of application without due regard for the manufacturer's technical specifications or for goodpractice.2 – Centauro shall not be considered liable for Centauro parts or components incorporated into products that have not beenmarketed by Centauro as a “finished product”.3 – Centauro shall not be considered liable for damages of any type occurring in products in the possession of the customeras a result of execution of works ordered of it, unless there is fraud, negligence, all serious blame. This exclusion of liability isapplied to the customer, to its employees and third parties, and the customer shall be obliged to release Centauro from allclaims presented in respect of the matter by third parties.4 – Within the context of the foregoing point, Centauro cannot be considered liable, at any level, for damage to or loss ofmaterial provided by the customer, the transport of the said materials be for the account and at the risk of the customer at alltimes.5 – In the event of entitlement to indemnity it shall consist of the repair of the products supplied or financial compensation, atthe option of Centauro, which shall not be liable for third-party damages or indirect damages, including compensation for liquidcoolants (including primary and secondary coolant fluids). In no case may the indemnity be of a value greater than that of thecorresponding order.6 – The customer shall be liable for all claims arising from the supply by the customer of Centauro products to third parties(Centauro being at all times entitled to right of recourse in respect of all sums paid), with the exception of liabilities arising fromlegal rules on product liability.7 – In the event of any occurrence that could potentially generate damage, the customer is obliged to take measures to limitlosses to the extent possible, and shall be liable to Centauro and third parties for the results of any conduct omitted.Article 13 –Warranty1 – The Centauro warranty is applicable to all products supplied by Centauro, the warranty guaranteeing that they aredelivered with no manufacturing defects and with the agreed characteristics No warranty shall be given in respect of defectsattributable to the nature or quality of the materials used that may be fully or partially the consequence of an administrativeregulation. The defects of products supplied that are the direct consequence of a design, construction or erection error byCentauro arising from the use of defective materials shall be repaired and replaced by Centauro, provided the customer candemonstrate that the defects appeared within twelve months of the commissioning of the equipment or within 18 months of thesupply. The customer is obliged to inform Centauro immediately, in writing, of any defects and to return to Centauro, carriagepaid, the defective components or products, also undertaking to do everything possible to limit the damage. The warranty shallbe considered null in any of the following cases:if the customer undertakes or allows alterations to the equipment delivered without the consent of Centauro;if the customer does not have due regard for the information or instructions provided by Centauro; and/orif the equipment is used for a purpose other than that for which it was ordered.The warranty shall also be considered null if the object of the supply is delivered by the customer to a country other than thatmentioned in the supply invoice.2 – If at the request of the customer used materials or products are supplied there shall be no warranty unless agreed inwriting. In the event that the customer provides its own components be fitted to Centauro products, Centauro shall providewarranty only with regard to the erection.3 – Allegation of non-conformities in complying with obligations concerning warranties shall not exempt the customer from fullcompliance with the contract.4 – Centauro shall not be liable for errors, defects, deficiencies and breakdowns resulting from improper handling of theequipment by the customer, its employees or third parties, for lack of regard for the technical specifications provided by themanufacturer, for normal wear and tear, or for defective electric power supply, Centauro to be provided with the necessaryrecords failing which it is liability shall be waived in full. This shall also apply in the event that the customer, its employees orthird parties tamper with the equipment during the warranty period without the written consent of Centauro.5 – All claims in respect of product defects that are directly visible or identifiable shall immediately be communicated (within 5working days) to Centauro in writing following reception of the equipment, otherwise no entitlement to a claim againstCentauro shall be recognised.Article 14 – Disputes and applicable legislationPortuguese legislation shall apply exclusively to the contract with the customer. The Castelo Branco District Court shall becompetent to settle all disputes arising from the contract, all others being expressly excluded.
NOTAS NOTES
76 TGC 2012/0
Zona Industrial, Lote Q-9Apartado 10016000-901 Castelo BrancoPORTUGALTel.: +351 272 339 260Fax: +351 272 320 684e-mail: mail@centauro.ptInternet: www.centauro.pt39º 49' 16.79"N 7º 31' 14.05"W
Rua Heróis dos Dembos, D-1 a D-3Bairro de Angola - Camarate2685-459 SacavémPORTUGALTel.: +351 219 487 300Fax: +351 219 487 306e-mail: mail@centauro.ptInternet: www.centauro.pt38º 47' 32.71"N 9º 08' 28.17"W
CENTAURO PORTUGAL - SGPS, S.A.
Recommended