For assistance please email us at info@taylorandhart.com or call us on US: (646) 712 - 9358 or UK: 0203 126 4915

www.taylorandhart.com

Select a ring that properly ts the intended nger.

Engagement and wedding rings are traditionally worn on the third nger (next to the little nger) of the left hand.

You can also use a ring worn only on the ring nger on the right hand. If this is the case, please let us know as we may need to adjust the size slightly.

PPlace the ring over the circles below. Match the inside edge of the ring to the circle nearest in size. This measurement refers to the inside diameter of the ring.

If the ring falls between two sizes, order a larger size.

MEASURE CURRENT RING

Ring measurements are very precise. Carefully follow these instructions to obtain an accurate measurement.

Prior to printing:On Windows: Press CTRL + P, set page scaling to None and print.On On Mac: Press + P, set page scaling to 100% and print.

Measure the bar on the right. It must exactly2 inches or 50mm long.

CONFIRM PRINTED PAPER SIZE

HOW TO DETERMINE YOUR RING SIZE

MEASUREMENTS MATCH THE INSIDE OF THE RING