166
GMPHOM 2009 Up to 600mm (24"), 21bar MARINE HOSES According to

catalogo alteracoes 19 - flexomarine.comflexomarine.com/assets/flexomarine-brochure.pdf · do ambiente em que o mangote vai operar. A Flexomarine encontra-se apta a ... one reinforced

  • Upload
    ngonhu

  • View
    214

  • Download
    0

Embed Size (px)

Citation preview

GMPHOM 2009Up to 600mm (24"), 21bar

MARINE HOSESAccording to

Nas próximas páginas você encontrará uma completa linha de mangotes marítimos flutuantes e submarinos desenvolvidos e aprimorados continuamente por mais de 33 anos de atuação da Flexomarine no mercado de transferência da produção de petróleo em alto-mar. Com know-how e tecnologia próprios e um quadro técnico-industrial de primeira linha, a Flexomarine consolidou-se num mercado altamente competitivo e com exigência de performance crescente, principalmente nas novas fronteiras de produção de petróleo em águas ultra profundas, onde as condições climáticas e marítimas expõem os mangotes a severas condições de operação. Utilizando-se de modernas técnicas de Pesquisa e Desenvolvimento de novos materiais e técnicas construtivas dos mangotes, a Flexomarine atende requisitos individuais e característicos sempre que diferentes condições de operação são especificadas pelo cliente em vista da locação e configuração do ambiente em que o mangote vai operar. A Flexomarine encontra-se apta a atender suas exigências! Consulte-nos!

Mangotes marítimos de alta performance em conformidade com a GMPHOM 2009

In the following pages you will find a complete line of marine floating and submarine hoses developed and continuously improved for over 33 years of Flexomarine’s experience in the offshore oil production and transfer.

With our own know-how and technology and a highly qualified and experienced staff, Flexomarine has consolidated into a highly competitive market, mainly at the new frontiers of ultra deep water offshore oil exploration and production, where extreme climate and maritime conditions bring the hoses into severe application conditions. Modern Research & Development techniques associated with best practices for hose construction allow Flexomarine to meet and exceed customer requirements at different operating conditions, according to location and ambient that hoses will operate. Flexomarine is capable of meeting your requirements! Contact us!

En las siguientes páginas Usted encontrará una completa línea de mangueras marítimas flotantes y submarinas, desarrolladas y mejoradas continuamente por mas de 33 años de experiencia de Flexomarine en el mercado de transferencia de crudos en operaciones offshore.

Con know-how y tecnología próprios y con un cuadro técnico-industrial de primera línea, Flexomarine está en una posición consolidada en un mercado altamente competitivo y con demanda de performance creciente, especialmente en las nuevas fronteras de producción de crudos en aguas ultra profundas, donde las condiciones climáticas y marítimas van a exponer las mangueras a duras condiciones de funcionamiento.

Utilizándose de técnicas modernas de pesquisa y desarrollo de nuevos materiales y construcción de las mangueras, Flexomarine atiende las necesidades y características individuales cuando las condiciones de operación son especificadas por los clientes cuanto a la ubicación y la configuración de aplicación de las mangueras marítimas. Flexomarine es capaz de satisfacer sus necesidades! Contacte con nosotros!

High performance GMPHOM 2009marine hoses

Mangueras marítimas de alta performance en conformidadcon GMPHOM 2009

We are very proud to announce that Flexomarine was awarded by Petrobras as 2nd Best Supplier in Large Purchases Category for Campos Basin, the biggest and most important Operational Unit of Petrobras, in a universe of 5700 registered suppliers.

PETROBRAS AWARDED

SUMMARY

FLEXOMARINE HOSES PRODUCT RANGE

RT REINFORCED SINGLE CARCASS 15 bar 1000 Series

RT REINFORCED SINGLE CARCASS 19 bar 1000 Series

RT REINFORCED SINGLE CARCASS 21 bar 1000 Series

RT DOUBLE CARCASS 15 bar 7000 Series

RT DOUBLE CARCASS 19 bar 7000 Series

RT DOUBLE CARCASS 21 bar 7000 Series

SINGLE CARCASS 15 bar 1000 Series

SINGLE CARCASS 19 bar 1000 Series

SINGLE CARCASS 21 bar 1000 Series

DOUBLE CARCASS 15 bar 7000 Series

DOUBLE CARCASS 19 bar 7000 Series

DOUBLE CARCASS 21 bar 7000 Series

07

09

21

33

45

57

69

81

95

109

123

137

151

REELING TYPE

MONOBUOY TYPE

Other applications under request

1000

Seri

es

15 b

ar16

00

1610

1620

1630

1640

1650

1652

1621

1622

1631

1632

1635

19 b

ar17

00

1710

1720

1730

1740

1750

1752

1721

1722

1731

1732

1735

21

bar

1800

1810

1820

1830

1840

1850

1852

1821

1822

1831

1832

1835

7000

Seri

es

15 b

ar76

00

7610

7620

7630

7640

7650

7652

7621

7622

7631

7632

7635

19 b

ar770

0

7710

772

0

773

0

774

0

775

0

775

2

772

1

772

2

773

1

773

2

773

5

21

bar

7800

7810

7820

7830

7840

7850

7852

7821

7822

7831

7832

7835

SU

FFIX

Flo

atin

gS

ubm

arin

eR

eeling

Type

Cat

enar

yExtr

aB

uoya

ncy

Hig

hFle

xB

uoya

ncy

Contr

ol

Both

Ends

Rein

forc

ed

or

Fully

Rein

forc

ed

Poly

ure

than

eC

over

FS

RT

CEB

HF

BC

FR

PU

1670

1770

1870

7670

7770

7870

Dra

win

gs

Fle

xom

arin

e inte

gra

l fu

ll-fl

oat

ing

tanke

r ra

il hose

(Jum

bo t

ype)

Fle

xom

arin

e inte

gra

l buoya

ncy

contr

ol hose

. D

esi

gned f

or

buoy

or

Reelin

g s

yste

ms

Fle

xom

arin

e (

firs

t off

the R

eel)

or

hal

f fl

oat

ing h

ose

wit

h o

ne r

ein

forc

ed

end (

firs

t off

the b

uoy)

Buoy a

nd R

eeling S

yst

em

Res

earc

h,

Dev

elopm

ent

and

Qual

ity A

ssura

nce

.FLEXOMARINE HOSES PRODUCT RANGE

REELING HOSES TYPE

In order to prevent contact of the hose flanges with the reel, all Flexomarine reeling hoses type have a rubber ring

(patented PI 1104814-0) at each end.

9RT REINFORCED SINGLE CARCASS HOSE

Flexomarine half floating hose with one reinforced end (first off FPSO)

Flexomarine integral full-floating hose for mainline

Flexomarine integral full-floating hose with built-in reducer

Flexomarine integral full-floating hose for tail

Flexomarine integral full-floating tanker end hose (Jumbo)

Flexomarine integral buoyancy control hoseDesigned upon request

Flexomarine submarine hose with one reinforced end for connection to the FPSO(First-Off FPSO).

Flexomarine standard mainline submarine hose

Flexomarine submarine hose for tanker end

1610F RT

1620F RT

1630F RT

1640F RT

1652F RT

1670BC RT

1631S RT

1632S RT

1635S RT

RT REINFORCED SINGLE CARCASS 15 bar 1000 Series Reeling Hose

RT SINGLE CARCASS

15 bar 1000 Series

PANTONE 255C: KNIFE

1 (FRONT)

PANTONE 255C: KNIFE

1 (BACK)

D1 D2 D3 D4

NominalBore(mm) D1 D2 D3 D4

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

800

960

1090

730

890

1020

600

760

890

620

780

910

15462214

20973183

27534476

17692555

23953672

31455171

19792875

26754131

35125822

End Body Body End

Single Carcass Hose FLEXOMARINE One End Reinforced to be used in theFPSO Offloading connection

Identified by one circumferencial white band at the reinforced end

The hose can be supplied with reinforcement at both ends or fully reinforced

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested

Electrical Continuity: Continuous or as requested

1610 F RT RT REINFORCED SINGLE CARCASS FLOATING HOSE

Type 1610 F RT First Off FPSO HOSE

GMPHOM 2009

3.6600(24")

1220 1200 1040 106035896096

41107058

45987959

RT REINFORCED SINGLE CARCASS 15 bar 1000 Series Reeling Hose

D1D2 D2

Single Carcass Hose FLEXOMARINE Mainline to be used as the main floating hose in the string

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

600

760

890

620

780

910

13372005

19052991

25694292

15212306

21683444

29264952

16932589

24143869

32615571

Body End

1620 F RT

Type 1620 F RT Mainline Hose

GMPHOM 2009

3.6600(24")

1040 106033525859

38296777

42767637

12

Reeling Hose

RT REINFORCED SINGLE CARCASS FLOATING HOSE

RT REINFORCED SINGLE CARCASS 15 bar 1000 Series

D3D1 D2

NominalBore(mm)

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)

400/30016"/12")

500/400(20"/16")

1.8

2.4

780

910

600

760

620

780

13432011

19393025

15282314

22073484

17012597

24583914

D1 D2 9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

D3

Type 1630 F RT Reducer Hose

Single Carcass Hose FLEXOMARINE Reducer Bore for use to connect larger mainline hose to smaller tail hose

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

GMPHOM 2009

1630 F RT

600/500(24"/20")

3.01060 900 92026014324

29644990

33035613

13

Reeling Hose

RT REINFORCED SINGLE CARCASS FLOATING HOSE

RT REINFORCED SINGLE CARCASS 15 bar 1000 Series

D1D2 D2

Type 1640 F RT Tail Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

600

760

890

620

780

910

13972065

19243010

25594282

15942379

21913468

29174943

17782674

24423898

32525562

Body End

Single Carcass Hose FLEXOMARINE Tail for use to connect the end connection hose and the main floating string

This hose has flexiblility enouth to support seawater conditions during offloading

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Discontinuous or as requested

GMPHOM 2009

1640 F RT

3.6600(24")

1040 106035776084

39756923

43727733

14

Reeling Hose

RT REINFORCED SINGLE CARCASS FLOATING HOSE

RT REINFORCED SINGLE CARCASS 15 bar 1000 Series

Type 1652 F RT Tanker End (Jumbo) Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

810

1000

1080

1020

1380

1470

1180

1430

1520

16872355

23173402

30854809

19082694

26183895

34865512

21143010

29004356

38596169

D3

GMPHOM 2009

12" = 100 kN 16" = 150 kN 20" = 200 kN

Single Carcass Hose FLEXOMARINE Tanker End for use to connect the ship's manifold and the floating hose string

Identified by a double circumferencial white bands at the tanker end

In the hose fittings liftings lugs can be welded to attach pick up device

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of NSV (North Sea Valve) up to 2,5 ton

Electrical Continuity: Discontinuous or as requested

1652 F RT

2.4600(24")

1230 1555 160040706577

45237471

49758336

15

Reeling Hose

RT REINFORCED SINGLE CARCASS FLOATING HOSE

RT REINFORCED SINGLE CARCASS 15 bar 1000 Series

Type 1670 BC RT Buoyancy Control Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

500

610

710

620

780

910

13001968

18652951

25004223

14782263

21203397

28444870

16442540

23603815

31675477

Body End

Single Carcass Hose FLEXOMARINE Buoyancy Control for use as the second and third hose in the string

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: Neutral or as requested

Electrical Continuity: Continuous or as requested

D1D2D2

GMPHOM 2009

1670 BC RT

3.6600(24")

840 106032845791

37486696

41837544

16

Reeling Hose

RT REINFORCED SINGLE CARCASS FLOATING HOSE

RT REINFORCED SINGLE CARCASS 15 bar 1000 Series

D3D1 D2 D4

Type 1631 S RT One Reinforced End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

660

760

860

455

555

655

430

540

640

650

750

850

1358476

1842698

2452952

1551536

2100783

27971070

1733593

2342862

31211181

D3 D4

Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose to be used on FPSO connections

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

1631 S RT

2.4600(24")

910 795 755 89032621304

37311473

41711631

17

Reeling Hose

RT REINFORCED SINGLE CARCASS SUBMARINE HOSE

RT REINFORCED SINGLE CARCASS 15 bar 1000 Series

D1 D2D2

Type 1632 S RT Mainline Hose

Single Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to be connected between reel and the Tanker on reeling systems

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

430

540

640

650

750

850

-

-

-

-

-

-

1251429

1716634

2301865

1420476

1944700

2610957

1579520

2158762

28991042

Body End

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

1632 S RT

2.4600(24")

755 890 - -30821183

35081315

39081439

18

Reeling Hose

RT REINFORCED SINGLE CARCASS SUBMARINE HOSE

RT REINFORCED SINGLE CARCASS 15 bar 1000 Series

D1 D2D2

Type 1635 S RT Tanker End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Submerged Weight Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

430

540

640

650

750

850

1261439

1727645

2315878

1430485

1955711

2624969

1588529

2170772

29131055

BodyEnd

GMPHOM 2009

12" = 100 kN 16" = 150 kN 20" = 200 kN

Single Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

In the hose fittings are welded lifting lugs

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

1635 S RT

2.4600(24")

755 89030981188

35261321

39271446

19

Reeling Hose

RT REINFORCED SINGLE CARCASS SUBMARINE HOSE

RT REINFORCED SINGLE CARCASS 15 bar 1000 Series

1710F RT

1720F RT

1730F RT

1740F RT

1752F RT

1770BC RT

1731S RT

1732S RT

1735S RT

RT REINFORCED SINGLE CARCASS HOSE

Flexomarine half floating hose with one reinforced end (first off FPSO)

Flexomarine integral full-floating hose for mainline

Flexomarine integral full-floating hose with built-in reducer

Flexomarine integral full-floating hose for tail

Flexomarine integral full-floating tanker end hose (Jumbo)

Flexomarine integral buoyancy control hoseDesigned upon request

Flexomarine submarine hose with one reinforced end for connection to the FPSO(First-Off FPSO).

Flexomarine standard mainline submarine hose

Flexomarine submarine hose for tanker end

SINGLE CARCASS 19 bar

1000 Series RT SINGLE CAR

CASS 19 bar 1000 Series

PANTONE 255C: KNIFE

2 (FRONT)

RT REINFORCED SINGLE CARCASS 19 bar 1000 Series Reeling Hose

PANTONE 255C: KNIFE

2 (BACK)

D1 D2 D3 D4

NominalBore(mm) D1 D2 D3 D4

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

800

960

1090

730

890

1020

630

790

920

650

810

940

17972465

24373523

31584881

20562842

27854061

36075633

22993195

31104566

40286338

End Body Body End

Single Carcass Hose FLEXOMARINE One End Reinforced to be used in theFPSO Offloading connection

Identified by one circumferencial white band at the reinforced end

The hose can be supplied with reinforcement at both ends or fully reinforced

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested

Electrical Continuity: Continuous or as requested

1710 F RT RT REINFORCED SINGLE CARCASS FLOATING HOSE

Type 1710 F RT First Off FPSO HOSE

GMPHOM 2009

3.6600(24")

1220 1200 1060 108041676674

47717719

53388699

23

Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series

D1D2 D2

Single Carcass Hose FLEXOMARINE Mainline to be used as the main floating hose in the string

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

630

790

920

650

810

940

14312100

20843170

27544477

16222407

23643640

31265152

18002696

26264082

34755785

Body End

1720 F RT

Type 1720 F RT Mainline Hose

GMPHOM 2009

3.6600(24")

1060 108036796186

41927140

46738034

24

Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series

RT REINFORCED SINGLE CARCASS FLOATING HOSE

D3D1 D2

NominalBore(mm)

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)

400/300(16"/12")

500/400(20"/16")

1.8

2.4

810

940

630

790

650

810

14392107

20943180

16302415

23763652

18092705

26394095

D1 D2 9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

D3

Type 1730 F RT Reducer Hose

Single Carcass Hose FLEXOMARINE Reducer Bore for use to connect larger mainline hose to smaller tail hose

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

GMPHOM 2009

1730 F RT

600/500(24"/20")

3.01080 920 94027675275

31416089

34926853

25

Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series

RT REINFORCED SINGLE CARCASS FLOATING HOSE

D1D2 D2

Type 1740 F RT Tail Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

630

790

920

650

810

940

15622230

21603246

28224545

17772562

24563732

32085234

19782874

27334188

35715881

Body End

Single Carcass Hose FLEXOMARINE Tail for use to connect end connection hose and the main floating string

This hose has flexiblility enouth to support seawater conditions during offloading

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Discontinuous or as requested

GMPHOM 2009

1740 F RT

3.6600(24")

1060 108036756182

41887136

46698030

26

Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series

RT REINFORCED SINGLE CARCASS FLOATING HOSE

Type 1752 F RT Tanker End (Jumbo) Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

810

1000

1080

1020

1380

1470

1180

1430

1520

18772545

25903676

33895113

21192904

29244201

38235849

23443240

32354691

42276537

D3

GMPHOM 2009

12" = 100 kN 16" = 150 kN 20" = 200 kN

Single Carcass Hose FLEXOMARINE Tanker End for use to connect the ship's manifold and the floating hose string

Identified by a double circumferencial white bands at the tanker end

In the hose fittings liftings lugs can be welded to attach pick up device

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of NSV (North Sea Valve) up to 2,5 ton

Electrical Continuity: Discontinuous or as requested

1752 F RT

2.4600(24")

1230 1550 160042346741

47057652

51758536

27

Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series

RT REINFORCED SINGLE CARCASS FLOATING HOSE

Type 1770 BC RT Buoyancy Control Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

510

620

720

650

810

940

13952063

20203106

26654388

15792365

22883565

30215047

17512647

25403996

33555665

Body End

Single Carcass Hose FLEXOMARINE Buoyancy Control for use as the second and third hose in the string

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: Neutral or as requested

Electrical Continuity: Continuous or as requested

D1D2D2

GMPHOM 2009

1770 BC RT

3.6600(24")

850 108035836090

40787026

45427903

28

Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series

RT REINFORCED SINGLE CARCASS FLOATING HOSE

D3D1 D2 D4

Type 1731 S RT One Reinforced End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

660

760

860

460

565

665

440

550

650

650

750

850

1542595

2091840

27191122

1762670

2385942

31011259

1968740

26611038

34601388

D3 D4

Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose to be used on FPSO connections

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

1731 S RT

2.4600(24")

910 795 765 89036651520

41921713

46871893

29

Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series

RT REINFORCED SINGLE CARCASS SUBMARINE HOSE

D1 D2D2

Type 1732 S RT Mainline Hose

Single Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to connect between reel and Tanker on reeling systems

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

440

550

650

650

750

850

-

-

-

-

-

-

1369489

1886707

2477955

1549536

2131772

28011044

1718579

2362834

31061128

Body End

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

1732 S RT

2.4600(24")

765 890 - -33771302

38351433

42651556

30

Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series

RT REINFORCED SINGLE CARCASS SUBMARINE HOSE

Type 1735 S RT Tanker End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Submerged Weight Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

440

550

650

650

750

850

1378498

1896717

2490967

1558544

2142783

28141057

1726588

2372844

31181141

BodyEnd

GMPHOM 2009

12" = 100 kN 16" = 150 kN 20" = 200 kN

Single Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

In the hose fittings are welded lifting lugs

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

1735 S RT

2.4600(24")

765 89034441315

39121448

43501572

D1 D2D2

31

Reeling HoseRT REINFORCED SINGLE CARCASS 19 bar 1000 Series

RT REINFORCED SINGLE CARCASS SUBMARINE HOSE

RT REINFORCED SINGLE CARCASS HOSE

Flexomarine half floating hose with one reinforced end (first off FPSO)

Flexomarine integral full-floating hose for mainline

Flexomarine integral full-floating hose with built-in reducer

Flexomarine integral full-floating hose for tail

Flexomarine integral full-floating tanker end hose (Jumbo)

Flexomarine integral buoyancy control hoseDesigned upon request

Flexomarine submarine hose with one reinforced end for connection to the FPSO(First-Off FPSO).

Flexomarine standard mainline submarine hose

Flexomarine submarine hose for tanker end

RT SINGLE CARCASS 21 bar

1000 Series

PANTONE 255C: KNIFE

3 (FRONT)

Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series

1810F RT

1820F RT

1830F RT

1840F RT

1852F RT

1870BC RT

1831S RT

1832S RT

1835S RT

PANTONE 255C: KNIFE

3 (BACK)

D1 D2 D3 D4

NominalBore(mm) D1 D2 D3 D4

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

800

960

1090

730

890

1020

630

790

920

650

810

940

18532521

25133599

32564979

21202905

28714147

37195745

23703266

32064662

41526463

Single Carcass Hose FLEXOMARINE One End Reinforced to be used in the FPSO Offloading connection

Identified by one circumferencial white band at the reinforced end

The hose can be supplied with reinforcement at both ends or fully reinforced

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested

Electrical Continuity: Continuous or as requested

1810 F RT

Type 1810 F RT First Off FPSO HOSE

GMPHOM 2009

3.6600(24")

1220 1200 1060 108042966803

49197867

55038864

35RT REINFORCED SINGLE CARCASS FLOATING HOSE

Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series

D1D2 D2

Single Carcass Hose FLEXOMARINE Mainline to be used as the main floating hose in the string

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

630

790

920

650

810

940

14762144

21483234

28394562

16722457

24373714

32225249

18562751

27074163

35825892

Body End

1820 F RT

Type 1820 F RT Mainline Hose

GMPHOM 2009

3.6600(24")

1060 108037936300

43227270

48188179

36 RT REINFORCED SINGLE CARCASS FLOATING HOSE

Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series

D3D1 D2

NominalBore(mm)

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)

400/300(16"/12")

500/400(20"/16")

1.8

2.4

810

940

630

790

650

810

14832151

21593245

16802466

24493726

18652761

27214177

D1 D2 9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

D3

Type 1830 F RT Reducer Hose

Single Carcass Hose FLEXOMARINE Reducer Bore for use to connect larger mainline hose to smaller tail hose

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

GMPHOM 2009

1830 F RT

600/500(24"/20")

3.01080 920 94028535360

32396186

36006961

37RT REINFORCED SINGLE CARCASS FLOATING HOSE

Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series

D1D2 D2

Type 1840 F RT Tail Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

630

790

920

650

810

940

16102278

22273313

29094632

18322617

25313808

33075334

20392935

28174273

36815991

Body End

Single Carcass Hose FLEXOMARINE Tail for use to connect the end connection hose and the main floating string

This hose has flexiblility enouth to support seawater conditions during offloading

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Discontinuous or as requested

GMPHOM 2009

1840 F RT

3.6600(24")

1060 108037896296

43187266

48138174

38 RT REINFORCED SINGLE CARCASS FLOATING HOSE

Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series

Type 1852 F RT Tanker End (Jumbo) Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

810

1000

1080

1020

1380

1470

1180

1430

1520

19352603

26713756

34945217

21842970

30144291

39415967

24173312

33354791

43586668

D3

GMPHOM 2009

12" = 100 kN 16" = 150 kN 20" = 200 kN

Single Carcass Hose FLEXOMARINE Tanker end for use to connect the ship's manifold and the floating hose string

Identified by a double circumferencial white bands at the tanker end

In the hose fittings liftings lugs can be welded to attach pick up device

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of NSV (North Sea Valve) up to 2,5 ton

Electrical Continuity: Discontinuous or as requested

1852 F RT

2.4600(24")

1230 1550 160043656872

48507798

53358696

39RT REINFORCED SINGLE CARCASS FLOATING HOSE

Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series

Type 1870 BC RT Buoyancy Control Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

510

620

720

650

810

940

14382107

20823168

27474471

16282414

23593636

31145141

18062701

26194074

34595769

Body End

D1D2D2

GMPHOM 2009

1870 BC RT

Single Carcass Hose FLEXOMARINE Buoyancy Control for use as the second and third hose in the string

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: Neutral or as requested

Electrical Continuity: Continuous or as requested

3.6600(24")

850 108036936201

42047152

46828044

40 RT REINFORCED SINGLE CARCASS FLOATING HOSE

Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series

D3D1 D2 D4

Type 1831 S RT One Reinforced End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

660

760

860

460

565

665

440

550

650

650

750

850

1550598

2101844

27321128

1771673

2397947

31171266

1978744

26741043

34771395

D3 D4

Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose to be used on FPSO connections

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

1831 S RT

2.4600(24")

910 795 765 89036831528

42131721

47101903

41RT REINFORCED SINGLE CARCASS SUBMARINE HOSE

Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series

D1 D2D2

Type 1832 S RT Mainline Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

440

550

650

650

750

850

-

-

-

-

-

-

1376492

1895710

2489960

1557538

2142776

28151050

1726582

2374838

31211134

Body End

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

1832 S RT

Single Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to be connected between reel and the Tanker on reeling systems

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

2.4600(24")

765 890 - -33941309

38541440

42861564

42 RT REINFORCED SINGLE CARCASS SUBMARINE HOSE

Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series

D1 D2D2

Type 1835 S RT Tanker End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Submerged Weight Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

440

550

650

650

750

850

1385501

1906721

2502972

1566547

2153787

28281062

1735591

2384848

31341146

BodyEnd

GMPHOM 2009

12" = 100 kN 16" = 150 kN 20" = 200 kN

Single Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

In the hose fittings are welded lifting lugs

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

1835 S RT

2.4600(24")

765 89034611322

39311455

43721580

43RT REINFORCED SINGLE CARCASS SUBMARINE HOSE

Reeling HoseRT REINFORCED SINGLE CARCASS 21 bar 1000 Series

7610F RT

7620F RT

7630F RT

7640F RT

7652F RT

7670BC RT

7631S RT

7632S RT

7635S RT

RT DOUBLE CARCASS HOSE

RT DOUBLE CARCASS 15 bar 7000 Series

Flexomarine half floating hose with one reinforced end (first off FPSO)

Flexomarine integral full-floating hose for mainline

Flexomarine integral full-floating hose with built-in reducer

Flexomarine integral full-floating hose for tail

Flexomarine integral full-floating tanker end hose (Jumbo)

Flexomarine integral buoyancy control hoseDesigned upon request

Flexomarine submarine hose with one reinforced end for connection to the FPSO(First-Off FPSO).

Flexomarine standard mainline submarine hose

Flexomarine submarine hose for tanker end

RT DOU

BLE CAR

CASS 15 bar 7000 Series

PANTONE 255C: KNIFE

4 (FRONT)

Reeling Hose

PANTONE 255C: KNIFE

4 (BACK)

D1 D2 D3 D4

RT DOUBLE CARCASS 15 bar 7000 Series

NominalBore(mm) D1 D2 D3 D4

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

800

950

1170

780

930

1150

680

830

990

700

850

1020

21752843

28943980

36535377

24683253

32794556

41516177

27423638

36405095

46176928

End Body Body End

7610 F RT RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Type 7610 F RT First Off FPSO HOSE

GMPHOM 2009

Double Carcass Hose FLEXOMARINE SAFE One Reinforced End to be used in the or FPSO Offloading connection

Identified by one circumferencial white band at the reinforced end

The hose can be supplied with reinforcement at both ends or fully reinforced

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including teh weight of ancillary equipment or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

3.6600(24")

1300 1270 1120 114049077414

55948542

62349599

FLEXOMARINE SAFE

47

Reeling Hose

D1D2 D2

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

680

830

970

700

850

995

19362604

26693755

34145137

21832969

30134290

38695895

21453311

33354791

42956605

Body End

7620 F RT

Type 7620 F RT Mainline Hose

GMPHOM 2009

3.6600(24")

1160 116045987105

52308178

58239184

Double Carcass Hose FLEXOMARINE SAFE Mainline to be used as the main floating hose in the string

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

RT DOUBLE CARCASS 15 bar 7000 Series

FLEXOMARINE SAFE

48

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

D3D1 D2

NominalBore(mm)

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)

400/300(16"/12")

500/400(20"/16")

1.8

2.4

850

995

680

830

700

850

19452613

26823768

21942980

30284305

24273323

33524808

D1 D2 9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

D3

Type 7630 F RT Reducer Hose

GMPHOM 2009

7630 F RT

600/500(24"/20")

3.01140 970 99534315154

38885914

43166627

Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect larger mainline hose to smaller tail hose

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

RT DOUBLE CARCASS 15 bar 7000 Series

FLEXOMARINE SAFE

49

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

D1D2 D2

Type 7640 F RT Tail Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

680

830

970

700

850

995

20282696

26993785

34285152

22953081

30524329

38905916

25463442

33834839

43226632

Body End

GMPHOM 2009

7640 F RT

Double Carcass Hose FLEXOMARINE SAFE Tail for use to connectthe end connection hose and the main floating string

This hose has flexiblility enouth to support seawater conditions during offloading

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

3.6600(24")

1160 116046447151

52838231

58829243

RT DOUBLE CARCASS 15 bar 7000 Series

FLEXOMARINE SAFE

50

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Type 7652 F RT Tanker End (Jumbo) Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

880

1070

1160

1200

1450

1550

1250

1500

1600

23983066

31934279

40595783

26963482

35884865

45726598

29743870

39565412

50497359

D3

GMPHOM 2009

7652 F RT

Double Carcass Hose FLEXOMARINE SAFE Tanker End for use to connect the ship's manifold and the floating hose string

Identified by a double circumferencial white bands at the tanker end

In the hose fittings liftings lugs can be welded to attach pick up device

Each lug are tested to support Safe Working Loads as follow:

12"= 100 kN 16"= 150 kN 20"= 200 kN

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of NSV (North Sea Valve) up to 2,5 ton

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

2.4600(24")

1300 1600 163048217328

53578305

58939254

RT DOUBLE CARCASS 15 bar 7000 Series

FLEXOMARINE SAFE

51

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Type 7670 BC RT Buoyancy Control Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

510

620

730

700

850

990

18822550

25873673

32995022

21202906

29164193

37315757

23433239

32244680

41366447

Body End

D1D2D2

GMPHOM 2009

7670 BC RT

Double Carcass Hose FLEXOMARINE SAFE buoyancy control for use as the second and the third hose in the string

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: Neutral or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

3.6600(24")

930 114044816988

50907116

56617971

RT DOUBLE CARCASS 15 bar 7000 Series

FLEXOMARINE SAFE

52

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

D3D1 D2 D4

Type 7631 S RT One Reinforced End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

710

810

920

505

595

710

480

570

685

700

800

900

1890595

2494854

31641100

2140638

2819917

35871190

2374679

3123976

39841275

D3 D4

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

7631 S RT

Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose to be used on FPSO connections

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

2.4600(24")

1070 840 820 105043501527

49511663

55141791

RT DOUBLE CARCASS 15 bar 7000 Series

FLEXOMARINE SAFE

53

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

D1 D2D2

Type 7632 S RT Mainline Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

480

570

685

700

800

900

-

-

-

-

-

-

1784568

2368813

30141036

2009602

2663862

34031105

2220635

2940909

37671171

Body End

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

7632 S RT

Double Carcass Hose FLEXOMARINE SAFE Mainline Submarine Hose for use as the main submarine hose in the string to be connected between reel and the Tanker on reeling systems

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

2.4600(24")

820 1050 - -41671432

47261539

52491639

RT DOUBLE CARCASS 15 bar 7000 Series

FLEXOMARINE SAFE

54

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

D1 D2D2

Type 7635 S RT Tanker End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Submerged Weight Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

480

570

685

700

800

900

1793577

2379823

30271048

2018611

2674873

34161118

2229644

2951919

37801183

BodyEnd

GMPHOM 2009

12" = 100 kN 16" = 150 kN 20" = 200 kN

Double Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

7635 S RT

2.4600(24")

820 105041881441

47491552

52751640

RT DOUBLE CARCASS 15 bar 7000 Series

FLEXOMARINE SAFE

55

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

7710F RT

7720F RT

7730F RT

7740F RT

7752F RT

7770BC RT

7731S RT

7732S RT

7735S RT

RT DOUBLE CARCASS 19 bar 7000 Series

RT DOUBLE CARCASS HOSE

Flexomarine half floating hose with one reinforced end (first off FPSO)

Flexomarine integral full-floating hose for mainline

Flexomarine integral full-floating hose with built-in reducer

Flexomarine integral full-floating hose for tail

Flexomarine integral full-floating tanker end hose (Jumbo)

Flexomarine integral with buoyancy control hoseDesigned upon request

Flexomarine submarine hose with one reinforced end for connection to the FPSO(First-Off FPSO).

Flexomarine standard mainline submarine hose

Flexomarine submarine hose for tanker end

RT DOU

BLE CAR

CASS 19 bar 7000 Series

PANTONE 255C: KNIFE

5 (FRONT)

Reeling Hose

PANTONE 255C: KNIFE

5 (BACK)

D1 D2 D3 D4

RT DOUBLE CARCASS 19 bar 7000 Series

NominalBore(mm) D1 D2 D3 D4

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

830

980

1200

810

960

1180

710

860

1020

730

880

1050

22452913

30234109

38405563

25543340

34374714

43706396

28443740

38255280

48677178

End Body Body End

Double Carcass Hose FLEXOMARINE SAFE One End Reinforced to be used in the or FPSO Offloading connection

Identified by one circumferencial white band at the reinforced end

The hose can be supplied with reinforcement at both ends or fully reinforced

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including teh weight of ancillary equipment or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

7710 F RT RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Type 7710 F RT First Off FPSO HOSE

GMPHOM 2009

3.6600(24")

1330 1300 1150 117050307537

57388686

64029763

FLEXOMARINE SAFE

59

Reeling Hose

D1D2 D2

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

710

860

1000

730

880

1025

19692637

27513837

35455268

22263011

31154392

40226048

24673363

34564912

44696779

Body End

7720 F RT

Type 7720 F RT Mainline Hose

GMPHOM 2009

RT DOUBLE CARCASS 19 bar 7000 Series

Double Carcass Hose FLEXOMARINE SAFE Mainline to be used as the main floating hose in the string

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

3.6600(24")

1170 117046617268

53028250

59059266

FLEXOMARINE SAFE

60

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

D3D1 D2

NominalBore(mm)

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)

400/300(16"/12")

500/400(20"/16")

1.8

2.4

880

1025

710

860

730

880

21202788

29624048

23973182

33544631

26563552

37225177

D1 D2 9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

D3

Type 7730 F RT Reducer Hose

GMPHOM 2009

7730 F RT

Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect larger mainline hose to smaller tail hose

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

RT DOUBLE CARCASS 19 bar 7000 Series

600/500(24"/20")

3.01170 1000 102538175540

43316357

48127123

FLEXOMARINE SAFE

61

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

D1D2 D2

Type 7740 F RT Tail Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

710

860

1000

730

880

1025

20592727

27803866

35575280

23353121

31524429

40396066

25953490

35014957

44926802

Body End

GMPHOM 2009

7740 F RT

Double Carcass Hose FLEXOMARINE SAFE Tail for use to connect the end connection hose and the main floating string

This hose has flexiblility enouth to support seawater conditions during offloading

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

RT DOUBLE CARCASS 19 bar 7000 Series

3.6600(24")

1170 117047077214

53558303

59649325

FLEXOMARINE SAFE

62

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Type 7752 F RT Tanker End (Jumbo) Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

880

1070

1160

1200

1450

1550

1250

1500

1600

24323100

32824368

42045927

27403525

36994976

47416767

30273923

40885544

52427552

D3

GMPHOM 2009

7752 F RT

Double Carcass Hose FLEXOMARINE SAFE Tanker End for use to connectthe ship's manifold and the floating hose string

Identified by a double circumferencial white bands at the tanker end

In the hose fittings liftings lugs can be welded to attach pick up device

Each lug are tested to support Safe Working Loads as follow:

12"= 100 kN 16"= 150 kN 20"= 200 kN

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of NSV (North Sea Valve) up to 2,5 ton

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

RT DOUBLE CARCASS 19 bar 7000 Series

2.4600(24")

1300 1600 163049727479

55878535

61469507

FLEXOMARINE SAFE

63

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Type 7770 BC RT Buoyancy Control Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

540

650

760

730

880

1025

19162585

26713757

34325155

21642949

30204296

38875913

23963292

33464802

43136624

Body End

D1D2D2

GMPHOM 2009

7770 BC RT

Double Carcass Hose FLEXOMARINE SAFE Buoyancy Control for use asthe second and third hose in the string

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: Neutral or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

RT DOUBLE CARCASS 19 bar 7000 Series

3.6600(24")

940 115045457053

51658113

57469107

FLEXOMARINE SAFE

64

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

D3D1 D2 D4

Type 7731 S RT One Reinforced End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

710

810

920

515

615

725

490

590

700

700

800

900

1914593

2564860

32771126

2171637

2906925

37211217

2412678

3227985

41361302

D3 D4

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

7731 S RT

Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose to be used on FPSO connections

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

RT DOUBLE CARCASS 19 bar 7000 Series

2.4600(24")

1070 860 830 105043961545

50041680

55741807

FLEXOMARINE SAFE

65

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

D1 D2D2

Type 7732 S RT Mainline Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

490

590

700

700

800

900

-

-

-

-

-

-

1809561

2439811

31291058

2042595

2752862

35381129

2261628

3046909

39211196

Body End

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

7732 S RT

Double Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to connect between reel and Tanker on reeling systems

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

2.4600(24")

830 1050 - -42171449

47831556

53141657

FLEXOMARINE SAFE

RT DOUBLE CARCASS 19 bar 7000 Series

66

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

D1 D2D2

Type 7735 S RT Tanker End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Submerged Weight Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

490

590

700

700

800

900

1818574

2449826

31421075

2051609

2762877

35501146

2270642

3056925

39331213

BodyEnd

GMPHOM 2009

12" = 100 kN 16" = 150 kN 20" = 200 kN

Double Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

7735 S RT

2.4600(24")

830 105042381446

48071564

53401665

FLEXOMARINE SAFE

RT DOUBLE CARCASS 19 bar 7000 Series

67

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

7810F RT

7820F RT

7830F RT

7840F RT

7852F RT

7870BC RT

7831S RT

7832S RT

7835S RT

RT DOUBLE CARCASS 21 bar 7000 Series

RT DOUBLE CARCASS HOSE

Flexomarine half floating hose with one reinforced end (first off FPSO)

Flexomarine integral full-floating hose for mainline

Flexomarine integral full-floating hose with built-in reducer

Flexomarine integral full-floating hose for tail

Flexomarine integral full-floating tanker end hose (Jumbo)

Flexomarine integral buoyancy control hoseDesigned upon request

Flexomarine submarine hose with one reinforced end for connection to the FPSO(First-Off FPSO).

Flexomarine standard mainline submarine hose

Flexomarine submarine hose for tanker end

RT DOU

BLE CAR

CASS 21 bar 7000 Series

PANTONE 255C: KNIFE

6 (FRONT)

Reeling Hose

PANTONE 255C: KNIFE

6 (FRONT)

D1 D2 D3 D4

RT DOUBLE CARCASS 21 bar 7000 Series

NominalBore(mm) D1 D2 D3 D4

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

830

980

1200

810

960

1180

710

860

1020

730

880

1050

23152983

31174202

39585682

26333419

35434820

45056531

29323828

39435399

50187328

Double Carcass Hose FLEXOMARINE SAFE One Reinforced End be used in the FPSO Offloading connection

Identified by one circumferencial white band at the reinforced end

The hose can be supplied with reinforcement at both ends or fully reinforced

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including teh weight of ancillary equipment or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

7810 F RT RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Type 7810 F RT First Off FPSO HOSE

GMPHOM 2009

3.6600(24")

1330 1300 1150 117051867693

59168864

66009961

FLEXOMARINE SAFE

71

Reeling Hose

D1D2 D2

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

710

860

1000

730

880

1025

20302698

28363922

36545378

22953080

32114488

41466172

25433439

35635019

46076918

Body End

7820 F RT

Type 7820 F RT Mainline Hose

GMPHOM 2009

RT DOUBLE CARCASS 21 bar 7000 Series

Double Carcass Hose FLEXOMARINE SAFE Mainline to be used as the main floating hose in the string

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

3.6600(24")

1170 117048057312

54668414

60879449

FLEXOMARINE SAFE

72

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

D3D1 D2

NominalBore(mm)

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)

400/300(16"/12")

500/400(20"/16")

1.8

2.4

880

1025

710

860

730

880

21862854

30544140

24713256

34584735

27383634

38375293

D1 D2 9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

D3

Type 7830 F RT Reducer Hose

GMPHOM 2009

7830 F RT

Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect larger mainline hose to smaller tail hose

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

RT DOUBLE CARCASS 21 bar 7000 Series

600/500(24"/20")

3.01170 1000 102539355658

44656491

49617271

FLEXOMARINE SAFE

73

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

D1D2 D2

Type 7840 F RT Tail Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

710

860

1000

730

880

1025

21232791

28663951

36665390

24083193

32494526

41646191

26753570

36095065

46316941

Body End

GMPHOM 2009

7840 F RT

Double Carcass Hose FLEXOMARINE SAFE Tail for use to connect the end connection rail hose and the main floating string

This hose has flexiblility enouth to support seawater conditions during offloading

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

RT DOUBLE CARCASS 21 bar 7000 Series

3.6600(24")

1170 117048537360

55218468

61489509

FLEXOMARINE SAFE

74

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Type 7852 F RT Tanker End (Jumbo) Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

880

1070

1160

1200

1450

1550

1250

1500

1600

25073175

33834469

43346057

28243610

38135090

48876914

31214017

42155671

54047714

D3

GMPHOM 2009

7852 F RT

Double Carcass Hose FLEXOMARINE SAFE Tanker End for use to connectthe ship's manifold and the floating hose string

Identified by a double circumferencial white bands at the tanker end

In the hose fittings liftings lugs can be welded to attach pick up device

Each lug are tested to support Safe Working Loads as follow:

12"= 100 kN 16"= 150 kN 20"= 200 kN

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of NSV (North Sea Valve) up to 2,5 ton

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

2.4600(24")

1300 1600 163051267633

57608708

63369697

RT DOUBLE CARCASS 21 bar 7000 Series

FLEXOMARINE SAFE

75

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Type 7870 BC RT Buoyancy Control Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.8

2.4

3.0

300(12")

400(16")

500(20")

540

650

760

730

880

1025

19762644

27543840

35385261

22313016

31134390

40076033

24703366

34504906

44476757

Body End

D1D2D2

GMPHOM 2009

7870 BC RT

Double Carcass Hose FLEXOMARINE SAFE Buoyancy Control for use asthe second and third hose in the string

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: Neutral or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy,futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

RT DOUBLE CARCASS 21 bar 7000 Series

3.6600(24")

940 115046867193

53258273

59249285

FLEXOMARINE SAFE

76

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

D3D1 D2 D4

Type 7831 S RT One Reinforced End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

710

810

920

515

615

725

490

590

700

700

800

900

1923596

2577864

32941131

2182640

2921929

37391223

2424682

3243990

41571309

D3 D4

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

7831 S RT

Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose to be used on FPSO connections

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

RT DOUBLE CARCASS 21 bar 7000 Series

2.4600(24")

1070 860 830 105044181553

50291688

56021816

FLEXOMARINE SAFE

77

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

D1 D2D2

Type 7832 S RT Mainline Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

490

590

700

700

800

900

-

-

-

-

-

-

1818563

2451815

31451063

2053598

2776866

35551135

2273631

3061914

39401202

Body End

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

7832 S RT

Double Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to connect between reel and Tanker on reeling systems

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

RT DOUBLE CARCASS 21 bar 7000 Series

2.4600(24")

830 1050 - -42381456

48071564

53411665

FLEXOMARINE SAFE

78

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

D1 D2D2

Type 7835 S RT Tanker End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Submerged Weight Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

1.2

1.6

2.0

300(12")

400(16")

500(20")

490

590

700

700

800

900

1827577

2461830

31581080

2062612

2766881

35681152

2282645

3071929

39531219

BodyEnd

GMPHOM 2009

12" = 100 kN 16" = 150 kN 20" = 200 kN

Double Carcass Hose FLEXOMARINE Tanker End Submarine Hose for use to facilitate lifting up the string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

7835 S RT

RT DOUBLE CARCASS 21 bar 7000 Series

2.4600(24")

830 105043231471

49041580

54481682

FLEXOMARINE SAFE

79

Reeling Hose

RT DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

1000

Seri

es

15 b

ar16

00

1610

1620

1630

1640

1650

1652

1621

1622

1631

1632

1635

19 b

ar17

00

1710

1720

1730

1740

1750

1752

1721

1722

1731

1732

1735

21

bar

1800

1810

1820

1830

1840

1850

1852

1821

1822

1831

1832

1835

7000

Seri

es

15 b

ar76

00

7610

7620

7630

7640

7650

7652

7621

7622

7631

7632

7635

19 b

ar770

0

7710

772

0

773

0

774

0

775

0

775

2

772

1

772

2

773

1

773

2

773

5

21

bar

7800

7810

7820

7830

7840

7850

7852

7821

7822

7831

7832

7835

SU

FFIX

Flo

atin

gS

ubm

arin

eR

eeling

Type

Cat

enar

yExtr

aB

uoya

ncy

Hig

hFle

xB

uoya

ncy

Contr

ol

Both

Ends

Rein

forc

ed

or

Fully

Rein

forc

ed

Poly

ure

than

eC

over

FS

RT

CEB

HF

BC

FR

PU

1670

1770

1870

7670

7770

7870

Dra

win

gs

Fle

xom

arin

e inte

gra

l fu

ll-fl

oat

ing

tanke

r ra

il hose

(Jum

bo t

ype)

Fle

xom

arin

e inte

gra

l buoya

ncy

contr

ol hose

. D

esi

gned f

or

buoy

or

Reelin

g s

yste

ms

Fle

xom

arin

e (

firs

t off

the R

eel)

or

hal

f fl

oat

ing h

ose

wit

h o

ne r

ein

forc

ed

end (

firs

t off

the b

uoy)

Buoy a

nd R

eeling S

yst

em

Res

earc

h,

Dev

elopm

ent

and

Qual

ity A

ssura

nce

.

MONOBUOY HOSES TYPE

GMPHOM2009

Flexomarine half floating hose with one reinforced end (first off the buoy)1610F

Flexomarine integral full-floatinghose for mainline1620F

Flexomarine integral full-floatinghose with built-in reducer1630F

Flexomarine integral full-floatinghose for tail1640F

Flexomarine integral full-floatingtanker rail hose (Dumbell or Barbell type)1650F

Flexomarine integral buoyancy control hose.Designed upon request1670BC

Flexomarine submarine hose with onereinforced end and location collars forconnection to the buoy or PLEM

1621S

Flexomarine standard mainlinesubmarine hose with location collars1622S

Flexomarine submarine hose with onereinforced end for connection to thebuoy or PLEM

1631S

Flexomarine standard mainline submarine hose1632S

Flexomarine submarine hose for tanker rail1635S

SINGLE CARCASS 15 bar 1000 Series

SINGLE CARCASS HOSE

PANTONE 255C: KNIFE

7 (FRONT)

SINGLE CARCASS

15 bar 1000 Series

PANTONE 255C: KNIFE

7 (BACK)

D3D1 D2 D4

Single Carcass Hose FLEXOMARINE One End Reinforced for use in the first off the buoy position

Identified by one circumferencial white band at the reinforced end

The hose can be supplied with reinforcement at both ends or fully reinforced

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 5% or as requested

Electrical Continuity: Continuous or as requested

FLOATING SINGLE CARCASS 15 bar 1000 Series

NominalBore(mm) D1 D2 D3 D4

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

335

400

460

530

620

740

855

280

335

390

455

515

600

720

360

450

530

590

735

845

1015

380

470

560

630

775

890

1060

602771

8131109

10731527

13802048

18722958

24584181

32635770

691890

9321280

12271761

15802365

21393415

28084834

37366684

7741001

10451442

13711980

17672663

23883844

31365446

41807541

End Body Body End

1610F SINGLE CARCASS FLOATING HOSE

Type 1610F First Off Buoy Hose

GMPHOM 2009

85

D1D2 D2

Type 1620F Mainline Hose

Single Carcass Hose FLEXOMARINE Mainline for use as the main floating hose in the string

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

360

415

500

555

705

840

985

385

445

535

590

745

885

1035

-

-

-

-

-

-

-

-

-

-

-

-

-

-

571740

7271023

9811435

11741842

17232809

23224045

31045611

650849

8261174

11131647

13282113

19493226

26304656

35276475

724951

9181315

12361845

14722368

21613617

29195229

39237284

1620F

FLOATING SINGLE CARCASS 15 bar 1000 Series

9.1m 10.7m 12.2m

SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

86

D3D1 D2

NominalBore(mm)

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)

200/150(8"/6")

250/200(10"/8")

250/150(10"/6")

300/250(12"/10")

300/200(12"/8")

300/150(12"/6")

400/300(16"/12")

400/250(16"/10")

500/400(20"/16")

500/300(20"/12")

600/500(24"/20")

600/400(24"/16")

0.9

1.2

0.9

1.5

1.2

0.9

1.8

390

450

435

545

495

465

615

360

415

360

500

415

360

560

380

440

380

535

440

380

600

-

-

-

-

-

-

-

540711

7151013

546714

9681424

7221017

551721

11991865

617817

8171166

623821

11021638

8251171

629829

13642148

689917

9121310

696921

12281839

9211316

703930

15192412

1.5

2.4

1.8

3.0

2.4

590

765

655

905

805

500

710

560

845

710

535

750

600

890

750

-

-

-

-

-

9771430

17312814

12051871

23224042

17402822

11071645

19703244

13712154

26464668

19803253

12401846

21953647

15272419

29495255

22063658

D1 D2 9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

D3

BodyEnd End

1630F

FLOATING SINGLE CARCASS 15 bar 1000 Series

Type 1630F Reducer Hose

Single Carcass Hose FLEXOMARINE Reducer Bore for use to connect large mainline hose to smaller tail hose

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

87

D1D2 D2

FLOATING SINGLE CARCASS 15 bar 1000 Series

Type 1640F Tail Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

370

420

505

565

710

845

390

450

540

600

750

890

-

-

-

-

-

-

-

-

-

-

-

-

594763

7621058

10201474

12911959

17972883

23944117

677876

8681216

11581692

14662252

20363313

27154741

755982

9661363

12881897

16302526

22603716

30165326

Body End

Single Carcass Hose FLEXOMARINE Tail for use to connect the tanker rail hose and the floating string

This hose has flexiblility enouth to support seawater conditions during offloading

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Discontinuous or as requested

1640F SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

88

FLOATING SINGLE CARCASS 15 bar 1000 Series

Type 1650F Tanker Rail Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

435

495

615

685

830

1000

305

420

475

535

680

795

490

550

670

790

990

1215

-

-

-

-

-

-

572742

7771073

10381492

13502018

18532939

24684192

646845

8811229

11721706

15262312

20953372

27894815

714941

9791375

12971906

16912587

23203776

30875398

BodyEnd

D3

End

1650F SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

6" = 40 kN12" = 100 kN

8" = 50 kN16" = 150 kN

10" = 70 kN20" = 200 kN

as requested

as requested

89

D1 D2D2

FLOATING SINGLE CARCASS 15 bar 1000 Series

Type 1670BC Buoyancy Control Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

305

370

445

510

625

735

885

325

415

510

545

665

780

900

-

-

-

-

-

-

-

-

-

-

-

-

-

-

517686

696992

9431397

11611829

16652751

22323955

29855492

589788

7931141

10721606

13192105

18933170

25394565

34076355

658884

8851282

11931802

14682364

21073562

28275137

38037164

Body End

Single Carcass Hose FLEXOMARINE Buoyancy Control for use as the second and third hose in the string

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: Neutral or as requested

Electrical Continuity: Continuous or as requested

1670BC SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

90

D3 D2D4 D1

SUBMARINE SINGLE CARCASS 15 bar 1000 Series

Type 1621S One Reinforced End Hose With Location Collars

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

MinimumBendingRadius

(m)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

310

370

420

471

581

697

799

420

471

581

581

697

799

946

350

405

470

530

625

740

855

275

330

385

440

535

645

755

610197

788262

1043364

1308507

1803744

23961013

31181360

698221

902293

1188404

1490565

2050826

27261127

35511520

776242

1001321

1317441

1654619

2269901

30201232

39401668

Body End

D3 D4

BodyEnd

Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection used on monobuoy systems

Supplied with float location collars

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Collar Hose

Submerged Weight Full of Sea Water (kg)

1621S SINGLE CARCASS SUBMARINE HOSE 91

D2D1D2

Type 1622S Mainline Hose With Location Collars

NominalBore(mm) D1 D2

Collar Outside Diameter (mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

310

370

420

471

581

697

799

420

471

581

581

697

799

946

-

-

-

-

-

-

-

-

-

-

-

-

-

-

572175

744233

997329

1239461

1737683

2316929

30241246

646191

841255

1122358

1398505

1955747

26121017

34161370

715207

931276

1239386

1548547

2161806

28901099

37841487

Body End

Single Carcass Hose FLEXOMARINE Mainline Standard Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems

Supplied with float location collars

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

SUBMARINE SINGLE CARCASS 15 bar 1000 Series

Submerged Weight Full of Sea Water (kg)

1622S SINGLE CARCASS SUBMARINE HOSE

GMPHOM 2009

92

D3D1 D2 D4

Type 1631S One Reinforced End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

350

405

470

530

625

740

855

275

330

385

440

535

645

755

250

305

360

415

505

620

730

340

395

460

520

615

730

840

583193

755257

998358

1272502

1745736

23261004

30361349

666216

861288

1135397

1446559

1978816

26391116

34511507

744238

960316

1264434

1610613

2198892

29331221

38401655

BodyEnd

D3 D4

Body End

Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

1631S

SUBMARINE SINGLE CARCASS 15 bar 1000 Series

Submerged Weight Full of Sea Water (kg)

SINGLE CARCASS SUBMARINE HOSE

GMPHOM 2009

93

D1 D2D2

Type 1632S Mainline Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

250

305

360

415

505

620

730

340

395

460

520

615

730

840

-

-

-

-

-

-

-

-

-

-

-

-

-

-

519168

678225

908318

1169452

1621669

2178912

28601226

587184

767246

1025346

1320495

1826731

2457997

32351348

651199

850266

1135373

1461536

2019788

27181077

35851462

Body End

Single Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifoldand buoy connection used on monobuoy systems

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

1632S

SUBMARINE SINGLE CARCASS 15 bar 1000 Series

Submerged Weight Full of Sea Water (kg)

SINGLE CARCASS SUBMARINE HOSE

GMPHOM 2009

94

D1 D2D2

Type 1635S Tanker Rail Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Submerged Weight Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

250

305

360

415

505

620

340

395

460

520

615

730

-

-

-

-

-

-

-

-

-

-

-

-

519168

678225

908318

1169452

1621669

2178912

587184

767246

1025346

1320495

1826731

2457997

651199

850266

1135373

1461536

2019788

27181077

BodyEnd

Single Carcass Hose FLEXOMARINE Tanker Rail Submarine Hose for use to facilitate lifting up the string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

1635S

SUBMARINE SINGLE CARCASS 15 bar 1000 Series

SINGLE CARCASS SUBMARINE HOSE

GMPHOM 2009

6" = 40 kN12" = 100 kN

8" = 50 kN16" = 150 kN

10" = 70 kN20" = 200 kN

95

Flexomarine half floating hose with one reinforced end (first off the buoy)

Flexomarine integral full-floatinghose for mainline

Flexomarine integral full-floatinghose with built-in reducer

Flexomarine integral full-floatinghose for tail

Flexomarine integral full-floatingtanker rail hose (Dumbell or Barbell type)

Flexomarine integral buoyancy control hose.Designed upon request

Flexomarine submarine hose with onereinforced end and location collars forconnection to the buoy or PLEM

Flexomarine standard mainlinesubmarine hose with location collars

Flexomarine submarine hose with onereinforced end for connection to thebuoy or PLEM

Flexomarine standard mainline submarine hose

Flexomarine submarine hose for tanker rail

1710F

1720F

1730F

1740F

1750F

1770BC

1721S

1722S

1731S

1732S

1735S

SINGLE CARCASS 19 bar 1000 Series

SINGLE CARCASS HOSE

SINGLE CARCASS 19 bar

1000 Series

PANTONE 255C: KNIFE

8 (FRONT)

PANTONE 255C: KNIFE

8 (BACK)

D3D1 D2

D4

FLOATING SINGLE CARCASS 19 bar 1000 Series

Type 1710F First Off Buoy Hose

Single Carcass Hose FLEXOMARINE One End Reinforced for use in the first off the buoy position

Identified by one circumferencial white band at the reinforced end

The hose can be supplied with reinforcement at both ends or fully reinforced

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 5% or as requested

Electrical Continuity: Continuous or as requested

1710F SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

NominalBore(mm) D1 D2 D3 D4

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

375

430

495

565

665

775

905

295

345

405

470

540

655

780

375

460

545

610

760

895

1075

410

495

585

655

810

950

1135

736905

9441240

12441698

16042273

21763262

28204543

37886295

8431042

10811429

14211955

18362621

24863763

32215247

43387285

9441171

12081605

15872196

20522948

27774233

35965907

48538215

End Body Body End

99

D1D2 D2

FLOATING SINGLE CARCASS 19 bar 1000 Series

Type 1720F Mainline Hose

Single Carcass Hose FLEXOMARINE Mainline for use as the main floating hose in the string

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

1720F SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

360

420

505

560

710

845

995

385

450

540

595

750

890

1040

-

-

-

-

-

-

-

-

-

-

-

-

-

-

571740

7571053

10171471

12141882

17712857

23794102

31755682

650849

8621210

11541688

13752161

20053282

26974724

36106558

724951

9591356

12841893

15262421

22253681

29965306

40187379

Body End

100

D3D1 D2

FLOATING SINGLE CARCASS 19 bar 1000 Series

Type 1730F Reducer Hose

Single Carcass Hose FLEXOMARINE Reducer Bore for use to connect large mainline hose to smaller tail hose

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

1730F SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

NominalBore(mm)

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)

200/150(8"/6")

250/200(10"/8")

250/150(10"/6")

300/250(12"/10")

300/200(12"/8")

300/150(12"/6")

400/300(16"/12")

400/250(16"/10")

500/400(20"/16")

500/300(20"/12")

600/500(24"/20")

600/400(24"/16")

0.9

1.2

0.9

1.5

1.2

0.9

1.8

410

465

455

560

510

485

635

365

420

365

505

420

365

570

400

455

400

550

455

400

620

-

-

-

-

-

-

-

587756

7471043

593762

10211475

7541050

599768

12841953

666865

8461194

673872

11561690

8541202

680879

14552241

741967

9391336

748975

12831892

9481345

755982

16152511

1.5

2.4

1.8

3.0

2.4

605

790

675

925

830

505

725

570

860

725

550

775

620

910

775

-

-

-

-

-

10311485

18702956

12911959

24714194

18792965

11621696

21213398

14622248

28054831

21323408

12961904

23563812

16232519

31185428

23683824

D1 D2 9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

D3

BodyEnd End

101

D1D2 D2

FLOATING SINGLE CARCASS 19 bar 1000 Series

Type 1740F Tail Hose

Single Carcass Hose FLEXOMARINE Tail for use to connect the tanker rail hose and the floating string

This hose has flexiblility enough to support seawater conditions during offloading

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Discontinuous or as requested

1740F SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

370

425

510

570

715

850

390

455

545

605

755

895

-

-

-

-

-

-

-

-

-

-

-

-

594763

7941090

10561510

13332001

18452931

24514175

677896

9051253

12011735

15152301

20933370

27834809

755982

10081405

13361945

16862581

23263781

30945404

Body End

102

FLOATING SINGLE CARCASS 19 bar 1000 Series

Type 1750F Tanker Rail Hose

Single Carcass Hose FLEXOMARINE Tanker Rail for use to connect the ship's manifold and the floating hose string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs to attach pick-up and snubbing chains

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested

Electrical Continuity: Discontinuous or as requested

1750F SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0,6

0.8

1.0

1.2

1.6

2.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

465

520

640

710

865

1030

320

430

490

555

705

815

520

575

695

820

1025

1245

-

-

-

-

-

-

660829

8561152

11471602

15022170

20723158

27114435

742941

9661314

12921826

16952481

23393616

30585085

8191046

10691466

14262035

18752771

25884044

33825692

BodyEnd

D3

End

6" = 40 kN12" = 100 kN

8" = 50 kN16" = 150 kN

10" = 70 kN20" = 200 kN

103

D1 D2D2

Single Carcass Hose FLEXOMARINE Buoyancy Control for use as the second and third hose in the string

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: Neutral or as requested

Electrical Continuity: Continuous or as requested

FLOATING SINGLE CARCASS 19 bar 1000 Series

Type 1770BC Buoyancy Control Hose

1770BC SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

310

370

450

515

640

750

905

345

435

525

565

690

805

930

-

-

-

-

-

-

-

-

-

-

-

-

-

-

565734

7281024

9961450

12461914

18032889

23794103

32575764

640839

8231171

11271661

14102196

20433320

26974724

37076655

710937

9131310

12491858

15642460

22683724

29955306

41297491

Body End

104

D3 D2D4 D1

Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection used on monobuoy systems

Supplied with float location collars

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

SUBMARINE SINGLE CARCASS 19 bar 1000 Series

Type 1721S One Reinforced End Hose With Location Collars

1721S SINGLE CARCASS SUBMARINE HOSE

GMPHOM 2009

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

310

370

420

471

581

697

799

420

471

581

581

697

799

946

350

415

475

535

630

745

860

275

335

390

445

540

650

765

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

MinimumBendingRadius

(m)Body End

D3 D4

BodyEnd

Collar Hose

Submerged Weight Full of Sea Water (kg)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

610197

818268

1076370

1346515

1848751

24491022

31841375

698221

936300

1227412

1535574

2103835

27891138

36271537

776242

1041329

1362450

1706629

2330912

30931245

40291687

105

D2D1D2

SUBMARINE SINGLE CARCASS 19 bar 1000 Series

Type 1722S Mainline Hose With Location Collars

Single Carcass Hose FLEXOMARINE Mainline Standard Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems

Supplied with float location collars

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

310

370

420

471

581

697

799

420

471

581

581

697

799

946

-

-

-

-

-

-

-

-

-

-

-

-

-

-

572175

770238

1027334

1273467

1776689

2363936

30821257

646191

871261

1156364

1439512

2002753

26681024

34841383

715207

966282

1279392

1594555

2214814

29541108

38621501

1722S

NominalBore(mm) D1 D2

Collar Outside Diameter (mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)Body End

Submerged Weight Full of Sea Water (kg)

SINGLE CARCASS SUBMARINE HOSE

GMPHOM 2009

106

D3D1 D2 D4

SUBMARINE SINGLE CARCASS 19 bar 1000 Series

Type 1731S One Reinforced End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

350

415

475

535

630

745

860

275

335

390

445

540

650

765

250

310

365

420

515

625

735

340

400

465

525

620

735

850

583193

787264

1034365

1314510

1793744

23841013

31071364

666216

898295

1178405

1496569

2036826

27081127

35351524

744238

1003324

1313443

1666624

2263903

30121234

39361674

BodyEnd

D3 D4

Body End

Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

1731S

Submerged Weight Full of Sea Water (kg)

SINGLE CARCASS SUBMARINE HOSE

GMPHOM 2009

107

D1 D2D2

SUBMARINE SINGLE CARCASS 19 bar 1000 Series

Type 1732S Mainline Hose

Single Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

250

310

365

420

515

625

735

340

400

465

525

620

735

860

-

-

-

-

-

-

-

-

-

-

-

-

-

-

519168

709231

943324

1209459

1668676

2234920

29301238

587184

803252

1066353

1367504

1882738

25231007

33161362

651199

891273

1181380

1515545

2082797

27941088

36791478

Body End

1732S

Submerged Weight Full of Sea Water (kg)

SINGLE CARCASS SUBMARINE HOSE

GMPHOM 2009

108

D1 D2D2

Type 1735S Tanker Rail Hose

Single Carcass Hose FLEXOMARINE Tanker Rail Submarine Hose for use to facilitate lifting up the string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0,6

0.8

1.0

1.2

1.6

2.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

250

310

365

420

515

625

340

400

465

525

620

735

-

-

-

-

-

-

-

-

-

-

-

-

519168

709231

943324

1209459

1668676

2234920

587184

803252

1066353

1367504

1882738

25231007

651199

891273

1181380

1515545

2082797

27941088

BodyEnd

6" = 40 kN12" = 100 kN

8" = 50 kN16" = 150 kN

10" = 70 kN20" = 200 kN

1735S

Submerged Weight Full of Sea Water (kg)

SINGLE CARCASS SUBMARINE HOSE

SUBMARINE SINGLE CARCASS 19 bar 1000 Series

GMPHOM 2009

109

Flexomarine half floating hose with one reinforced end (first off the buoy)

Flexomarine integral full-floatinghose for mainline

Flexomarine integral full-floatinghose with built-in reducer

Flexomarine integral full-floatinghose for tail

Flexomarine integral full-floatingtanker rail hose (Dumbell or Barbell type)

Flexomarine integral buoyancy control hose.Designed upon request

Flexomarine submarine hose with onereinforced end and location collars forconnection to the buoy or PLEM

Flexomarine standard mainlinesubmarine hose with location collars

Flexomarine submarine hose with onereinforced end for connection to thebuoy or PLEM

Flexomarine standard mainline submarine hose

Flexomarine submarine hose for tanker rail

1810F

1820F

1830F

1840F

1850F

1870BC

1821S

1822S

1831S

1832S

1835S

SINGLE CARCASS 21 bar 1000 Series

SINGLE CARCASS HOSE

SINGLE CARCASS 21 bar

1000 Series

SINGLE CARCASS 21 bar 1000 Series

PANTONE 255C: KNIFE

9 (FRONT)

PANTONE 255C: KNIFE

9 (BACK)

D3D1 D2

D4

FLOATING SINGLE CARCASS 21 bar 1000 Series

Type 1810F First Off Buoy Hose

Single Carcass Hose FLEXOMARINE One End Reinforced for use in the first off the buoy position

Identified by one circumferencial white band at the reinforced end

The hose can be supplied with reinforcement at both ends or fully reinforced

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 5% or as requested

Electrical Continuity: Continuous or as requested

NominalBore(mm) D1 D2 D3 D4

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

375

430

495

565

665

775

905

295

345

405

470

540

655

780

375

460

545

610

760

895

1075

410

495

585

655

810

950

1135

758928

9731269

12821736

16542322

22443329

29074630

39056412

8691068

11141462

14651999

18922678

25633840

33205346

44727420

9731200

12461643

16362245

21163012

28634318

37086018

50038364

End Body Body End

1810F SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

113

D1D2 D2

FLOATING SINGLE CARCASS 21 bar 1000 Series

Type 1820F Mainline Hose

Single Carcass Hose FLEXOMARINE Mainline for use as the main floating hose in the string

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

370

420

505

565

715

850

1005

390

450

540

605

755

895

1050

-

-

-

-

-

-

-

-

-

-

-

-

-

-

597766

7571053

10171471

12531921

18212906

24394162

33145821

680879

8621210

11541688

14212207

20643341

27684794

37746722

758985

9591356

12841893

15782474

22923748

30775387

42057567

Body End

1820F SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

114

D3D1 D2

FLOATING SINGLE CARCASS 21 bar 1000 Series

Type 1830F Reducer Hose

NominalBore(mm)

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)

200/150(8"/6")

250/200(10"/8")

250/150(10"/6")

300/250(12"/10")

300/200(12"/8")

300/150(12"/6")

400/300(16"/12")

400/250(16"/10")

500/400(20"/16")

500/300(20"/12")

600/500(24"/20")

600/400(24"/16")

0.9

1.2

0.9

1.5

1.2

0.9

1.8

410

465

455

560

510

485

635

365

420

365

505

420

365

570

400

455

400

550

455

400

620

-

-

-

-

-

-

-

605776

7701067

611779

10521509

7771072

617787

13241990

687888

8721222

694891

11921728

8811227

701900

15002283

763992

9681367

771996

13221934

9781372

7791006

16652558

1.5

2.4

1.8

3.0

2.4

605

790

675

925

830

505

725

570

860

725

550

775

620

910

775

-

-

-

-

-

10631515

19283010

13311996

25474266

19373019

11981735

21873459

15082290

28924913

21973470

13361942

24293881

16732565

32145519

24413892

D1 D2 9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

D3

BodyEnd End

Single Carcass Hose FLEXOMARINE Reducer Bore for use to connect large mainline hose to smaller tail hose

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

1830F SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

115

D1D2 D2

FLOATING SINGLE CARCASS 21 bar 1000 Series

Type 1840F Tail Hose

Single Carcass Hose FLEXOMARINE Tail for use to connect the tanker rail hose and the floating string

This hose has flexiblility enouth to support seawater conditions during offloading

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Discontinuous or as requested

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

375

425

510

575

720

855

400

455

545

610

760

900

-

-

-

-

-

-

-

-

-

-

-

-

621790

7941090

10561510

13732042

18162982

25124235

708907

9051253

12011735

15632349

21533430

28544881

7901017

10081405

13361945

17412636

23943849

31755485

Body End

1840F SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

116

FLOATING SINGLE CARCASS 21 bar 1000 Series

Type 1850F Tanker Rail Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0,6

0.8

1.0

1.2

1.6

2.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

465

520

640

710

865

1030

320

430

490

555

705

815

520

575

695

820

1025

1245

-

-

-

-

-

-

680849

8831179

11831637

15482216

21363222

27954519

765964

9961344

13321866

17472533

24113688

31535179

8441071

11021499

14712080

19332829

26684124

34865797

BodyEnd

D3

End

Single Carcass Hose FLEXOMARINE Tanker Rail for use to connect the ship's manifold and the floating hose string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs to attach pick-up and snubbing chains

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested

Electrical Continuity: Discontinuous or as requested

6" = 40 kN12" = 100 kN

8" = 50 kN16" = 150 kN

10" = 70 kN20" = 200 kN

1850F SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

117

D1 D2D2

Single Carcass Hose FLEXOMARINE Buoyancy Control for use as the second and third hose in the string

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: Neutral or as requested

Electrical Continuity: Continuous or as requested

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

310

370

450

515

640

750

905

345

435

525

565

690

805

930

-

-

-

-

-

-

-

-

-

-

-

-

-

-

582751

7501046

10271481

12841953

18592945

24534176

33585865

659859

8491197

11621696

14542239

21063383

27814807

38226770

732959

9411338

12881897

16122508

23383794

30885398

42577618

Body End

FLOATING SINGLE CARCASS 21 bar 1000 Series

Type 1870BC Buoyancy Control Hose

1870BC SINGLE CARCASS FLOATING HOSE

GMPHOM 2009

118

D3 D2D4 D1

Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection used on monobuoy systems

Supplied with float location collars

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

SUBMARINE SINGLE CARCASS 21 bar 1000 Series

Type 1821S One Reinforced End Hose With Location Collars

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

310

370

420

471

581

697

799

420

471

581

581

697

799

946

355

415

475

540

635

750

870

280

335

390

455

545

655

775

635202

818268

1076370

1384521

1895761

25051034

33111399

727227

936300

1227412

1580582

2158846

28541151

37781566

809249

1041329

1362450

1757638

2393925

31691260

42031720

1821S SINGLE CARCASS SUBMARINE HOSE

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

MinimumBendingRadius

(m)Body End

D3 D4

BodyEnd

Collar Hose

Submerged Weight Full of Sea Water (kg)

GMPHOM 2009

119

D2D1D2

SUBMARINE SINGLE CARCASS 21 bar 1000 Series

Type 1822S Mainline Hose With Location Collars

Single Carcass Hose FLEXOMARINE Mainline Standard Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems

Supplied with float location collars

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

310

370

420

471

581

697

799

420

471

581

581

697

799

946

-

-

-

-

-

-

-

-

-

-

-

-

-

-

594179

770238

1027334

1306472

1817697

2412945

31951276

671196

871261

1156364

1478518

2051762

27261035

36191405

744212

966282

1279392

1639561

2270823

30221120

40181526

1822S

NominalBore(mm) D1 D2

Collar Outside Diameter (mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)Body End

Submerged Weight Full of Sea Water (kg)

SINGLE CARCASS SUBMARINE HOSE

GMPHOM 2009

120

D3D1 D2 D4

SUBMARINE SINGLE CARCASS 21 bar 1000 Series

Type 1831S One Reinforced End Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

355

415

475

540

635

750

870

280

335

390

455

545

655

775

255

310

365

425

520

630

750

345

400

465

530

625

740

860

610199

787264

1034365

1355517

1844754

24451026

32461391

698223

898295

1178405

1544577

2096838

27801141

37001555

780245

1003324

1313443

1722634

2332917

30941250

41261710

BodyEnd

D3 D4

Body End

Single Carcass Hose FLEXOMARINE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

1831S

Submerged Weight Full of Sea Water (kg)

SINGLE CARCASS SUBMARINE HOSE

GMPHOM 2009

121

D1 D2D2

SUBMARINE SINGLE CARCASS 21 bar 1000 Series

Type 1832S Mainline Hose

Single Carcass Hose FLEXOMARINE Mainline Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

255

310

365

425

520

630

750

345

400

465

530

625

740

860

-

-

-

-

-

-

-

-

-

-

-

-

-

-

545173

709231

943324

1249465

1718684

2294930

30661260

617189

803252

1066353

1414510

1940748

25931019

34781387

685205

891273

1181380

1569553

2149808

28741101

38641507

Body End

1832S

Submerged Weight Full of Sea Water (kg)

SINGLE CARCASS SUBMARINE HOSE

GMPHOM 2009

122

D1 D2D2

Type 1835S Tanker Rail Hose

Single Carcass Hose FLEXOMARINE Tanker Rail Submarine Hose for use to facilitate lifting up the string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0,6

0.8

1.0

1.2

1.6

2.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

255

310

365

425

520

630

345

400

465

530

625

740

-

-

-

-

-

-

-

-

-

-

-

-

545173

709231

943324

1249465

1718684

2294930

617189

803252

1066353

1414510

1941748

25931019

685205

891273

1181380

1569553

2149808

28741101

BodyEnd

1835S

Submerged Weight Full of Sea Water (kg)

SINGLE CARCASS SUBMARINE HOSE

SUBMARINE SINGLE CARCASS 21 bar 1000 Series

GMPHOM 2009

6" = 40 kN12" = 100 kN

8" = 50 kN16" = 150 kN

10" = 70 kN20" = 200 kN

123

Flexomarine half floating hose with one reinforced end (first off the buoy)7610F

Flexomarine integral full-floatinghose for mainline7620F

Flexomarine integral full-floatinghose with built-in reducer7630F

Flexomarine integral full-floatinghose for tail7640F

Flexomarine integral full-floatingtanker rail hose (Dumbell or Barbell type)7650F

Flexomarine integral buoyancy control hose.Designed upon request7670BC

Flexomarine submarine hose with onereinforced end and location collars forconnection to the buoy or PLEM

7621S

Flexomarine standard mainlinesubmarine hose with location collars7622S

Flexomarine submarine hose with onereinforced end for connection to thebuoy or PLEM

7631S

Flexomarine standard mainline submarine hose7632S

Flexomarine submarine hose for tanker rail7635S

DOUBLE CARCASS 15 bar 7000 Series

DOUBLE CARCASS ANTI-POLLUTION HOSE FLEXOMARINE SAFE

SINGLE CARCASS 15 bar

1000 SeriesD

OUB

LE CARCASS 15 bar

7000 Series

PANTONE 255C: KNIFE

10 (FRONT)

PANTONE 255C: KNIFE

10 (BACK)

D3D1 D2 D4

FLOATING DOUBLE CARCASS 15 bar 7000 Series

Type 7610F First Off Buoy Hose FLEXOMARINE SAFE

NominalBore(mm) D1 D2 D3 D4

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

420

490

550

630

725

840

985

325

390

445

515

605

720

855

410

500

580

650

825

965

1150

465

560

650

725

855

990

1190

8731042

11811477

14941948

19422610

25843670

32624985

44616968

9901189

13421690

16942228

22032989

29274204

37065732

50868033

11011328

14921889

18832491

24483344

32504705

41236433

56719032

End Body Body End

Double Carcass Hose FLEXOMARINE SAFE One End Reinforced for use in the first off the buoy position

Identified by one circumferencial white band at the reinforced end

The hose can be supplied with reinforcement at both ends or fully reinforced

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 5% or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

7610F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Double carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

127

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

405

495

575

640

790

935

1095

460

555

640

715

815

960

1130

-

-

-

-

-

-

-

-

-

-

-

-

-

-

788958

10741370

13701824

17282396

23833469

30484771

41806687

8901089

12141562

15482082

19492735

26903967

34545480

47557703

9851212

13451742

17142323

21573052

29784434

38356145

52948655

Body End

Double Carcass Hose FLEXOMARINE SAFE Mainline for use as the main floating hose in the string

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

D1D2 D2

Type 7620F Mainline Hose

7620F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

128

D3D1 D2

NominalBore(mm)

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)

200/150(8"/6")

250/200(10"/8")

250/150(10"/6")

300/250(12"/10")

300/200(12"/8")

300/150(12"/6")

400/300(16"/12")

400/250(16"/10")

500/400(20"/16")

500/300(20"/12")

600/500(24"/20")

600/400(24"/16")

0.9

1.2

0.9

1.5

1.2

0.9

1.8

470

565

515

650

610

545

730

405

495

405

575

495

405

640

460

555

460

640

555

460

715

-

-

-

-

-

-

-

784956

10681367

792960

13631820

10791372

800969

17372401

8861087

12081559

8941091

15402077

12201565

9031102

19592740

9801210

13381738

9901215

17062318

13521745

10001227

21673058

1.5

2.4

1.8

3.0

2.4

695

830

770

975

870

575

790

640

935

790

640

815

715

960

815

-

-

-

-

-

13771828

23953476

17452408

30634781

24073486

15552086

27033975

19692749

34715491

27173987

17232328

29934443

21783068

38546157

30084456

D1 D2 9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

D3

BodyEnd End

Type 7630F Reducer Hose

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

7630F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect large mainline hose to smaller tail hose

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

129

Type 7640F Tail Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

410

500

580

650

795

940

465

560

650

725

820

965

-

-

-

-

-

-

-

-

-

-

-

-

812981

11101406

14111865

18442512

24543540

31174840

9181117

12561604

15962130

20872872

27754051

35365562

10171244

13941791

17702378

23153210

30754531

39296239

Body End

D1D2 D2

Double Carcass Hose FLEXOMARINE SAFE Tail for use to connect the tanker rail hose and the floating string

This hose has flexiblility enouth to support seawater conditions during offloading

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

7640F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

130

Type 7650F Tanker Rail Hose

Double Carcass Hose FLEXOMARINE SAFE Tanker Rail for use to connect the ship's manifold and the floating hose string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs to attach pick-up and snubbing chains

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0,6

0.8

1.0

1.2

1.6

2.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

520

585

705

780

930

1100

355

470

530

595

745

855

570

640

755

890

1095

1315

-

-

-

-

-

-

8491018

11521448

14661920

19192587

25543640

32484971

9511150

12961644

16462180

21572943

28704147

36575683

10451272

14311828

18152424

23793275

31654621

40396349

BodyEnd

D3

End

7650F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

6" = 40 kN12" = 100 kN

8" = 50 kN16" = 150 kN

10" = 70 kN20" = 200 kN

Weight in Air Full of Sea Water (kg)

Double Leak Detection System

131

Type 7670BC Buoyancy Control Hose

Double Carcass Hose FLEXOMARINE SAFE Buoyancy Control for use as the second and third hose in the string

Rated Working Pressure: 15 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: Neutral or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

350

445

495

565

685

795

960

405

505

560

640

765

875

1020

-

-

-

-

-

-

-

-

-

-

-

-

-

-

762931

10441340

13251779

16802349

23103396

29454669

40736581

8581057

11791527

14952029

18932678

26033880

33315358

46277575

9491176

13051702

16532262

20922988

28784334

36936003

51468508

Body End

D1 D2

7670BC DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

132

Type 7621S One Reinforced End Hose

Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection used on monobuoy systems

Supplied with float location collars

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

370

420

581

697

799

946

471

581

581

697

799

876

1050

420

490

550

630

725

840

985

315

380

435

505

595

710

845

827215

1119304

1399410

1872593

2478851

31131092

42821516

940229

1270323

1587438

2128637

2814916

35461184

48931654

1037241

1403341

1755462

2351677

3104974

39241267

54291779

471

D3 D2D4 D1

7621S DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

MinimumBendingRadius

(m)Body End

D3 D4

BodyEnd

Collar Hose

Submerged Weight Full of Sea Water (kg)

FLEXOMARINE SAFE

SUBMARINE DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

133

Type 7622S Mainline Hose With Location Collars

Double Carcass Hose FLEXOMARINE SAFE Mainline Standard Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems

Supplied with float location collars

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

370

420

471

581

697

799

946

471

581

581

697

799

876

1050

-

-

-

-

-

-

-

-

-

-

-

-

-

-

801209

1088291

1346391

1841569

2457817

30701036

42461435

900219

1222306

1514411

2073605

2765869

34681108

48151544

993229

1348320

1672430

2293639

3056918

38441175

53511647

D2D1D2

7622S

NominalBore(mm) D1 D2

Collar Outside Diameter (mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)Body End

Submerged Weight Full of Sea Water (kg)

DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

SUBMARINE DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

134

Type 7631S One Reinforced End Hose

Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

420

490

550

630

725

840

985

315

380

435

505

595

710

845

290

355

410

480

570

685

820

410

480

540

620

715

830

975

792211

1075298

1365406

1800583

2376838

30131079

41431497

896223

1218317

1544432

2038625

2685899

34161167

47151631

993235

1351334

1712457

2261665

2975957

37951250

52521756

BodyEnd

D3 D4

Body End

D3D1 D2 D4

7631S

Submerged Weight Full of Sea Water (kg)

DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

SUBMARINE DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

135

Type 7632S Mainline Hose

Double Carcass Hose FLEXOMARINE SAFE Mainline Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

290

355

410

480

570

685

820

410

480

540

620

715

830

975

-

-

-

-

-

-

-

-

-

-

-

-

-

-

732204

1002285

1279387

1699557

2255797

28711015

39691404

822213

1127298

1439406

1913591

2537845

32411084

45011509

906222

1245311

1588424

2114622

2800891

35871148

49991607

Body End

D1 D2D2

7632S

Submerged Weight Full of Sea Water (kg)

DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

SUBMARINE DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

136

D1 D2D2

Type 7635S Tanker Rail Hose

Double Carcass Hose FLEXOMARINE SAFE Tanker Rail Submarine Hose for use to facilitate lifting up the string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 15 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0,6

0.8

1.0

1.2

1.6

2.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

290

355

410

480

570

685

410

480

540

620

715

830

-

-

-

-

-

-

-

-

-

-

-

-

736208

1007290

1285393

1708565

2266807

28831028

826218

1133304

1445412

1922599

2547856

32531096

911226

1250316

1594430

2123631

2811901

36001160

BodyEnd

7635S

Submerged Weight Full of Sea Water (kg)

DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

SUBMARINE DOUBLE CARCASS 15 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

6" = 40 kN12" = 100 kN

8" = 50 kN16" = 150 kN

10" = 70 kN20" = 200 kN

Double Leak Detection System

137

Flexomarine half floating hose with one reinforced end (first off the buoy)7710F

Flexomarine integral full-floatinghose for mainline7720F

Flexomarine integral full-floatinghose with built-in reducer7730F

Flexomarine integral full-floatinghose for tail7740F

Flexomarine integral full-floatingtanker rail hose (Dumbell or Barbell type)7750F

Flexomarine integral buoyancy control hose.Designed upon request7770BC

Flexomarine submarine hose with onereinforced end and location collars forconnection to the buoy or PLEM

7721S

Flexomarine standard mainlinesubmarine hose with location collars7722S

Flexomarine submarine hose with onereinforced end for connection to thebuoy or PLEM

7731S

Flexomarine standard mainline submarine hose7732S

Flexomarine submarine hose for tanker rail7735S

DOUBLE CARCASS 19 bar 7000 Series

DOUBLE CARCASS ANTI-POLLUTION HOSE FLEXOMARINE SAFE

DOU

BLE CAR

CASS 19 bar 7000 Series

PANTONE 255C: KNIFE

11 (FRONT)

PANTONE 255C: KNIFE

11 (BACK)

FLOATING DOUBLE CARCASS 19 bar 7000 Series

Type 7710F First Off Buoy Hose

Double Carcass Hose FLEXOMARINE SAFE One End Reinforced for use in the first off the buoy position

Identified by one circumferencial white band at the reinforced end

The hose can be supplied with reinforcement at both ends or fully reinforced

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 5% or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

D3D1 D2 D4

7710F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Double carcass hose developed and tested for offshore mooring applications

FLEXOMARINE SAFE

GMPHOM 2009

NominalBore(mm) D1 D2 D3 D4

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

435

500

575

645

745

865

1005

340

400

465

530

630

740

870

425

510

600

665

850

985

1170

480

570

670

740

875

1015

1210

9231093

12031499

15772031

20052673

26993785

34285151

45737080

10511250

13701718

17912325

22813066

30684345

39025928

52178164

11711398

15251922

19922600

25393435

34154871

43466656

58209181

End Body Body End

Double Leak Detection System

141

Type 7720F Mainline Hose

Double Carcass Hose FLEXOMARINE SAFE Mainline for use as the main floating hose in the string

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

D1D2 D2

7720F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 19 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

415

500

585

655

810

950

1105

470

560

660

730

835

985

1150

-

-

-

-

-

-

-

-

-

-

-

-

-

-

817986

10711367

14221877

17582426

24563542

31654888

42376744

9241123

12121560

16082142

19872773

27814058

35915617

48207768

10261252

13441741

17812390

22033098

30864542

39906301

53688729

Body End

Double Leak Detection System

142

D3D1 D2

Type 7730F Reducer Hose

Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect large mainline hose to smaller tail hose

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

7730F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 19 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

NominalBore(mm)

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)

200/150(8"/6")

250/200(10"/8")

250/150(10"/6")

300/250(12"/10")

300/200(12"/8")

300/150(12"/6")

400/300(16"/12")

400/250(16"/10")

500/400(20"/16")

500/300(20"/12")

600/500(24"/20")

600/400(24"/16")

0.9

1.2

0.9

1.5

1.2

0.9

1.8

480

570

525

670

615

555

745

415

500

415

585

500

415

655

470

560

470

660

560

470

730

-

-

-

-

-

-

-

813982

10651361

821990

14151869

10761372

829998

17672435

9201119

12061554

9291128

16002134

12181566

9381137

19972783

10201247

13371734

10311258

17732381

13511748

10411268

22143109

1.5

2.4

1.8

3.0

2.4

715

850

785

1000

890

585

810

655

950

810

660

835

730

985

835

-

-

-

-

-

14291884

24693555

17752444

31814904

24813567

16162150

27954072

20072793

36095635

28094086

17902399

31014557

22253120

40106320

31174573

D1 D2 9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

D3

BodyEnd End

Double Leak Detection System

143

Type 7740F Tail Hose

Double Carcass Hose FLEXOMARINE SAFE Tail for use to connect the tanker rail hose and the floating string

This hose has flexiblility enouth to support seawater conditions during offloading

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

D1D2 D2

7740F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 19 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

420

505

595

660

815

955

475

565

665

735

840

990

-

-

-

-

-

-

-

-

-

-

-

-

8401010

11061402

14631918

18722540

25273613

32334956

9531152

12541602

16562190

21232909

28654142

36725698

10581285

13921789

18372446

23593254

31834639

40846394

Body End

Double Leak Detection System

144

Type 7750F Tanker Rail Hose

7750F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Double Carcass Hose FLEXOMARINE SAFE Tanker Rail for use to connect the ship's manifold and the floating hose string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs to attach pick-up and snubbing chains

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 19 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

6" = 40 kN12" = 100 kN

8" = 50 kN16" = 150 kN

10" = 70 kN20" = 200 kN

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0,6

0.8

1.0

1.2

1.6

2.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

530

590

720

790

950

1120

365

480

540

610

760

875

585

645

775

900

1110

1340

-

-

-

-

-

-

8761046

11471443

15191973

19452613

26263711

33635086

9841183

12921640

17072241

21922977

29594236

37935819

10851312

14291825

18832492

24223318

32714727

41946504

BodyEnd

D3

End

Double Leak Detection System

145

Type 7770BC Buoyancy Control Hose

Double Carcass Hose FLEXOMARINE SAFE Buoyancy Control for use as the second and third hose in the string

Rated Working Pressure: 19 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: Neutral or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

D1 D2D2

7770BC DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 19 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

360

450

505

575

700

810

970

415

510

580

650

780

900

1040

-

-

-

-

-

-

-

-

-

-

-

-

-

-

790960

10421338

13781833

17112379

23853471

30644787

41326640

8931092

11781526

15562090

19322718

26963973

34705497

46967644

9911218

13051702

17222331

21393035

29884444

38516161

52248585

Body End

Double Leak Detection System

146

Type 7721S One Reinforced End Hose With Location Collars

Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection used on monobuoy systems

Supplied with float location collars

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

D3 D2D4 D1

7721S DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

Double carcass hose developed and tested for offshore mooring applications

SUBMARINE DOUBLE CARCASS 19 bar 7000 Series

GMPHOM 2009

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

370

420

581

697

799

946

471

581

697

697

876

946

1050

435

495

570

640

740

860

1000

330

385

450

515

615

725

855

850212

1112298

1468417

1890581

2557844

32331100

43211507

967225

1264318

1662443

2152625

2907910

36811191

49361642

1070237

1398336

1837467

2383665

3214968

40781274

54821764

471

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

MinimumBendingRadius

(m)Body End

D3 D4

BodyEnd

Collar Hose

Submerged Weight Full of Sea Water (kg)

Double Leak Detection System

147

Type 7722S Mainline Hose With Location Collars

D2D1D2

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

370

420

471

581

697

799

946

471

581

697

697

876

946

1050

-

-

-

-

-

-

-

-

-

-

-

-

-

-

818204

1078285

1431401

1851556

2542809

31901046

42681428

922215

1213300

1605422

2090592

2864861

36041117

48431536

1019224

1339314

1769441

2314625

3167910

39941185

53841637

Double Carcass Hose FLEXOMARINE SAFE Mainline Standard Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems

Supplied with float location collars

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

7722S

NominalBore(mm) D1 D2

Collar Outside Diameter (mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)Body End

Submerged Weight Full of Sea Water (kg)

DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

Double carcass hose developed and tested for offshore mooring applications

SUBMARINE DOUBLE CARCASS 19 bar 7000 Series

GMPHOM 2009

Double Leak Detection System

148

Type 7731S One Reinforced End Hose

Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

435

495

570

640

740

860

1000

330

385

450

515

615

725

855

300

360

420

490

590

700

830

425

485

560

630

730

850

990

821208

1073293

1419411

1829573

2450830

31321087

42011491

931220

1217312

1606436

2075615

2778892

35561175

47831622

1034232

1351329

1781460

2305655

3084951

39531257

53281744

BodyEnd

D3 D4

Body End

D3D1 D2 D4

7731S

Submerged Weight Full of Sea Water (kg)

DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

Double carcass hose developed and tested for offshore mooring applications

SUBMARINE DOUBLE CARCASS 19 bar 7000 Series

GMPHOM 2009

Double Leak Detection System

149

Type 7732S Mainline Hose

Double Carcass Hose FLEXOMARINE SAFE Mainline Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

300

360

420

490

590

700

830

425

485

560

630

730

850

990

-

-

-

-

-

-

-

-

-

-

-

-

-

-

761197

1000276

1334389

1729541

2331782

29911021

40301399

857207

1127289

1501409

1952575

2630832

33811090

45721502

948215

1247302

1658427

2161606

2911878

37471154

50791599

Body End

D1D2D2

7732S

Submerged Weight Full of Sea Water (kg)

DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

Double carcass hose developed and tested for offshore mooring applications

SUBMARINE DOUBLE CARCASS 19 bar 7000 Series

GMPHOM 2009

Double Leak Detection System

150

D1 D2D2

Type 7735S Tanker Rail Hose

0,6

0.8

1.0

1.2

1.6

2.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

300

360

420

490

590

700

425

485

560

630

730

850

-

-

-

-

-

-

-

-

-

-

-

-

765205

1005285

1340400

1738554

2341797

30031038

862215

1132298

1507419

1961588

2640846

33931106

952223

1252311

1664437

2170620

2921893

37591171

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)Body End

Submerged Weight Full of Sea Water (kg)

Double Carcass Hose FLEXOMARINE SAFE Tanker Rail Submarine Hose for use to facilitate lifting up the string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 19 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

7735S DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

Double carcass hose developed and tested for offshore mooring applications

SUBMARINE DOUBLE CARCASS 19 bar 7000 Series

GMPHOM 2009

6" = 40 kN12" = 100 kN

8" = 50 kN16" = 150 kN

10" = 70 kN20" = 200 kN

Double Leak Detection System

151

Flexomarine half floating hose with one reinforced end (first off the buoy)7810F

Flexomarine integral full-floatinghose for mainline7820F

Flexomarine integral full-floatinghose with built-in reducer7830F

Flexomarine integral full-floatinghose for tail7840F

Flexomarine integral full-floatingtanker rail hose (Dumbell or Barbell type)7850F

Flexomarine integral buoyancy control hose.Designed upon request7870BC

Flexomarine submarine hose with onereinforced end and location collars forconnection to the buoy or PLEM

7821S

Flexomarine standard mainlinesubmarine hose with location collars7822S

Flexomarine submarine hose with onereinforced end for connection to thebuoy or PLEM

7831S

Flexomarine standard mainline submarine hose7832S

Flexomarine submarine hose for tanker rail7835S

DOUBLE CARCASS 21 bar 7000 Series

DOUBLE CARCASS HOSE

DOU

BLE CAR

CASS 21 bar 7000 Series

PANTONE 255C: KNIFE

12 (FRONT)

PANTONE 255C: KNIFE

12 (BACK)

FLOATING DOUBLE CARCASS 21 bar 7000 Series

Type 7810F First Off Buoy Hose

Double Carcass Hose FLEXOMARINE SAFE One End Reinforced for use in the first off the buoy position

Identified by one circumferencial white band at the reinforced end

The hose can be supplied with reinforcement at both ends or fully reinforced

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 5% or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

NominalBore(mm) D1 D2 D3 D4

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

435

500

575

645

745

865

1005

340

400

465

530

630

740

870

425

510

600

665

850

985

1170

480

570

670

740

875

1015

1210

9521121

12411537

16262080

20672735

27833868

35345258

47147221

10841283

14121760

18462380

23513137

31634440

40236049

53788326

12081434

15731969

20532662

26183514

35204976

44806791

60009361

End Body Body End

D3D1 D2 D4

7810F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Double carcass hose developed and tested for offshore mooring applications

FLEXOMARINE SAFE

GMPHOM 2009

Weight in Air Full of Sea Water (kg)

Double Leak Detection System

155

Type 7820F Mainline Hose

Double Carcass Hose FLEXOMARINE SAFE Mainline for use as the main floating hose in the string

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

415

500

585

655

810

950

1105

470

560

660

730

835

985

1150

-

-

-

-

-

-

-

-

-

-

-

-

-

-

8421011

11041400

14661921

18122480

25323618

32634986

43686875

9531152

12491597

16572191

20492834

28674144

37025728

49697917

10571284

13861783

18372446

22713166

31814637

41146424

55348895

Body End

D1D2 D2

7820F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Weight in Air Full of Sea Water (kg)

Double Leak Detection System

156

D3D1 D2

Type 7830F Reducer Hose

Double Carcass Hose FLEXOMARINE SAFE Reducer Bore for use to connect large mainline hose to smaller tail hose

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Continuous or as requested

NominalBore(mm)

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)

200/150(8"/6")

250/200(10"/8")

250/150(10"/6")

300/250(12"/10")

300/200(12"/8")

300/150(12"/6")

400/300(16"/12")

400/250(16"/10")

500/400(20"/16")

500/300(20"/12")

600/500(24"/20")

600/400(24"/16")

0.9

1.2

0.9

1.5

1.2

0.9

1.8

480

570

525

670

615

555

745

415

500

415

585

500

415

655

470

560

470

660

560

470

730

-

-

-

-

-

-

-

8381009

10981397

8461013

14591917

11091402

8551023

18212485

9481150

12431594

9581154

16492187

12551600

9671166

20592840

10521282

13791779

10631287

18272441

13931786

10731300

22823173

1.5

2.4

1.8

3.0

2.4

715

850

785

1000

890

585

810

655

950

810

660

835

730

985

835

-

-

-

-

-

14741924

25453625

18302493

32794996

25583636

16662196

28824152

20692849

37215740

28964165

18462450

31974646

22933182

41346437

32134660

D1 D2 9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

D3

BodyEnd End

7830F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Weight in Air Full of Sea Water (kg)

Double Leak Detection System

156

Type 7840F Tail Hose

Double Carcass Hose FLEXOMARINE SAFE Tail for use to connect the tanker rail hose and the floating string

This hose has flexiblility enouth to support seawater conditions during offloading

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% or as requested

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

420

505

595

660

815

955

475

565

665

735

840

990

-

-

-

-

-

-

-

-

-

-

-

-

8661036

11401436

15091963

19302598

26053691

33335056

9821181

12931641

17082242

21892974

29544231

37865812

10901317

14351832

18942503

24323327

32814737

42106520

Body End

D1D2 D2

7840F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Weight in Air Full of Sea Water (kg)

Double Leak Detection System

158

Type 7850F Tanker Rail Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0,6

0.8

1.0

1.2

1.6

2.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

530

590

720

790

950

1120

365

480

540

610

760

875

585

645

775

900

1110

1340

-

-

-

-

-

-

9031073

11821478

15662020

20052674

27073793

34675190

10151214

13321680

17602294

22603045

30514328

39105936

11191346

14731870

19412550

24973393

33724828

43236633

BodyEnd

D3

End

7850F DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

Double Carcass Hose FLEXOMARINE SAFE Tanker Rail for use to connect the ship's manifold and the floating hose string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs to attach pick-up and snubbing chains

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: 20% including the weight of ancillary equipment or as requested

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

6" = 40 kN12" = 100 kN

8" = 50 kN16" = 150 kN

10" = 70 kN20" = 200 kN

Double Leak Detection System

159

Type 7870BC Buoyancy Control Hose

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

Weight in Air Full of Sea Water (kg)MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.9

1.2

1.5

1.8

2.4

3.0

3.6

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

360

450

505

575

700

810

970

415

510

580

650

780

900

1040

-

-

-

-

-

-

-

-

-

-

-

-

-

-

815984

10741370

14211875

17642432

24593545

31594882

42606767

9211120

12141562

16042138

19922777

27804056

35785604

48417789

10221249

13461742

17752384

22053101

30804536

39706281

53858746

Body End

Double Carcass Hose FLEXOMARINE SAFE Buoyancy Control for use as the second and third hose in the string

Rated Working Pressure: 21 bar

Minimum Bending Radius: 6D (up to 2D without any permanent deformation)

Minimum Reserve Buoyancy: Neutral or as requested

Electrical Continuity: Continuous or as requested

Leak Detection: In case of failure of the primary carcass, a double leak detection system (DDEMAS - Double Detection Expansion and Mechanical Anti-Pollution System), confirms the failure of the primary carcass. It's operation combines the natural expansion of the secondary carcass with a change in the hose profile and an increase on its buoyancy, futhermore a rod installed in each hose end that is inicially embedded will become visible after the burst of the primary carcass giving additional confirmation of the failure

D1 D2D2

7870BC DOUBLE CARCASS ANTI-POLLUTION FLOATING HOSE

FLEXOMARINE SAFE

FLOATING DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

160

Type 7821S One Reinforced End Hose With Location Collars

Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection used on monobuoy systems

Supplied with float location collars

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

370

420

581

697

799

946

471

581

697

697

876

946

1050

435

495

570

640

740

860

1000

330

385

450

515

615

725

855

876218

1147308

1513430

1949599

2636870

33331134

44551554

997232

1303328

1713457

2219645

2997938

37951228

50891693

1103244

1441346

1894482

2456686

3313998

42041313

56511819

471

D3 D2D4 D1

7821S

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

MinimumBendingRadius

(m)Body End

D3 D4

BodyEnd

Collar Hose

Submerged Weight Full of Sea Water (kg)

DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

SUBMARINE DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

FLEXOMARINE SAFE

161

Type 7822S Mainline Hose With Location Collars

D2D1D2

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

370

420

471

581

697

799

946

471

581

697

697

876

946

1050

-

-

-

-

-

-

-

-

-

-

-

-

-

-

843211

1112294

1475414

1908573

2620834

32891078

44001472

950221

1250309

1655435

2154610

2952887

37161152

49921583

1051231

1381323

1823454

2386645

3265938

41181221

55501687

Double Carcass Hose FLEXOMARINE SAFE Mainline Standard Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems

Supplied with float location collars

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

7822S

NominalBore(mm) D1 D2

Collar Outside Diameter (mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)Body End

Submerged Weight Full of Sea Water (kg)

DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

SUBMARINE DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

162

Type 7831S One Reinforced End Hose

Double Carcass Hose FLEXOMARINE SAFE One Reinforced End Submarine Hose for use to connect sea bed manifold or buoy connection

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

435

495

570

640

740

860

1000

330

385

450

515

615

725

855

300

360

420

490

590

700

830

425

485

560

630

730

850

990

846214

1106302

1463423

1885590

2526855

32291120

43311537

960227

1254322

1656450

2139634

2864920

36661211

49311672

1066239

1393340

1836474

2377675

3180981

40761296

54931798

BodyEnd

D3 D4

Body End

D3D1 D2 D4

7831S

Submerged Weight Full of Sea Water (kg)

DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

SUBMARINE DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

163

Type 7832S Mainline Hose

Double Carcass Hose FLEXOMARINE SAFE Mainline Submarine Hose for use as the main submarine hose in the string to connect between sea bed manifold and buoy connection used on monobuoy systems

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)

0.6

0.8

1.0

1.2

1.6

2.0

2.4

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

600(24")

300

360

420

490

590

700

830

425

485

560

630

730

850

990

-

-

-

-

-

-

-

-

-

-

-

-

-

-

784203

1031284

1375401

1783558

2403807

30831053

41551442

884213

1162298

1547421

2012592

2711857

34861123

47131548

977222

1285312

1709440

2228625

3001905

38631190

52361648

Body End

D1D2D2

7832S

Submerged Weight Full of Sea Water (kg)

DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

SUBMARINE DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

Double Leak Detection System

164

D1 D2D2

Type 7835S Tanker Rail Hose

0,6

0.8

1.0

1.2

1.6

2.0

150(6")

200(8")

250(10")

300(12")

400(16")

500(20")

300

360

420

490

590

700

425

485

560

630

730

850

-

-

-

-

-

-

-

-

-

-

-

-

789211

1036293

1381412

1791572

2413822

30961070

888221

1167308

1553432

2021606

2722873

34981141

981230

1290321

1715451

2237639

3011920

38751207

NominalBore(mm) D1 D2

Outside Diameter(mm)

Weight in Air Empty (kg)

MinimumBendingRadius

(m)9.1m 10.7m 12.2m

(30ft) (35ft) (40ft)Body End

Submerged Weight Full of Sea Water (kg)

Double Carcass Hose FLEXOMARINE SAFE Tanker Rail Submarine Hose for use to facilitate lifting up the string

Identified by a double circumferencial white bands at the tanker end

This hose is extremely flexible to support the curvature demanded during offloading

The fittings hose are welded lifting lugs

Each lug are tested to support Safe Working Loads as follow:

Rated Working Pressure: 21 bar

Minimum Bending Radius: 4D (up to 2D without any permanent deformation)

Electrical Continuity: Discontinuous or as requested

Leak Detection: In case of failure of the primary carcass, a rod installed in each hose end, that is inicially embedded will become visible after the burst of the primary carcass giving confirmation of the failure.

7835S DOUBLE CARCASS ANTI-POLLUTION SUBMARINE HOSE

FLEXOMARINE SAFE

SUBMARINE DOUBLE CARCASS 21 bar 7000 SeriesDouble carcass hose developed and tested for offshore mooring applications

GMPHOM 2009

6" = 40 kN12" = 100 kN

8" = 50 kN16" = 150 kN

10" = 70 kN20" = 200 kN

Double Leak Detection System

165

Rua Dias da Silva, 17CEP 02114-000São Paulo - SP

Brazil