Upload
lsinsp3381
View
220
Download
0
Embed Size (px)
Citation preview
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 1/25
FLUX CORED WIREFLUX CORED WIRE
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 2/25
163
FLUX CORED WIRE
SF-71 AWS A5.20 / ASME SFA5.20 E71T-1
JIS Z3313 YFW-C50DR
All position welding of building, shipbuilding, bridges, machinery and vehicles.
Applications
Characteristics on Usage
Notes on Usage
DC
Welding Position (All-Position) Current
CO2
Shielding Gas
Dia. (mm) 1.0 1.2 1.4 1.6 Spool (kg) 5 12.5 15 20(in) .039 .045 .052 1/16 (lbs) 11 28 33 44
Ball Pac
KR, ABS, LR, BV, DNV, GL,NK, TÜV, CWB, Ü-SIGN,CCS, CRS
Approval Packing (lncluding Ball Pac)
Sizes Available and Recommended Currents (Amp.)
Size mm (in)
F & HF
V-up, OH
V-down
1.2 (.045) 1.4 (.052) 1.6 (1/16)
120~300 200~400 200~450
120~260 180~280 180~280
200~300 220~320 250~300
SF-71 is a titania type flux cored wire for all position welding with CO 2. Compared with solidwire, spatter loss is low, bead appearance is beautiful and arc is soft with good stability. Slagcovering is uniform with good removal.
Proper preheating(50~150°C)(122~302 ) and interpass temperature must be used in order torelease hydrogen which may cause cracking in weld metal when electrodes are used formedium and heavy plates.One-side welding defects such as hot cracking may occur with wrong welding parameter suchas high welding speed.Use 100% CO2 gas
Refer to page 168 for storage instructions.
Typical Chemical Composition of All-Weld Metal (%)
C Si Mn P S
0.04 0.49 1.29 0.010 0.009
Typical Mechanical Properties of All-Weld Metal
Y.S T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%) ( ) J (ft lbs)
548 (79,600) 582 (84,500) 28 0 (32) 86 (64)
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 3/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 4/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 5/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 6/25
171
FLUX CORED WIRE
170
FLUX CORED WIRE
SC-71MSR AWS A5.20 / ASME SFA5.20 E71T-12MJ
Oil and gas construction, pipe, and off-shore structures.
Applications
Characteristics on Usage
Notes on Usage
Dia. (mm) 1.2 Spool (kg) 12.5 15 20(in) .045 (lbs) 28 33 44
Ball Pac
ABS. BV, DNV, LR
Approval Packing (lncluding Ball Pac)
Sizes Available and Recommended Currents (Amp.)
Size mm (in)
F & HFV-up, OH
V-down
1.2 (.045)
200~390180~250
210~280
SC-71MSR is titania type flux cored wire for all position welding. It provides excellent notchtoughness at low temperature, not only as-welded but also stress relieved state.All position welding can be achieved with excellent flat bead appearance, less spatter, and easyslag removal and high welding current in vertical up position can be performed.
Proper preheating (50~150°C)(122~302 ) and interpass temperature must be used in orderto release hydrogen which may cause crack in weld metal when electrodes are used formedium and heavy thick plates.One-side welding defects such as hot cracking may occur with wrong welding parameter,such as high welding speed.Use Ar+20~25% CO2 gas for weldingRefer to page 168 for storage instructions.
Typical Mechanical Properties of All-Weld Metal
Y.S T.S EL. Charpy V-NotchN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%) -40 (-40 ) -50 (-60 )
As welded 542 (78,620) 577 (83,620) 30.0 115 (88) 88 (65)P.W.H.T
523 (75,760) 552 (80,047) 33.0 101 (75) 78 (58)(620°C 2hr)
Typical Chemical Composition of All-Weld Metal (%)
C Si Mn P S Ni0.06 0.35 1.24 0.012 0.012 0.45
SC-71SR AWS A5.20 / ASME SFA5.20 E71T-9J
JIS Z3313 YFW-C502R
Oil and gas construction, pipe and off-shore structures
Applications
Characteristics on Usage
Notes on Usage
DC
Welding Position (All-Position) Current
CO2
Shielding Gas
Dia. (mm) 1.2 1.4 Spool (kg) 12.5 15 20(inch) 0.045 0.052 (lbs) 28 33 44
Approval Packing (lncluding Ball Pac)
Sizes Available and Recommended Currents (Amp.)
Size mm (in)
F & HFV-up, OH
V-down
1.2 (0.045) 1.4 (0.052)
120~300 150~350120~260 140~270
200~300 220~320
SC-71SR is titania type flux cored wire for all position welding for use with CO 2 gases. Itprovides excellent notch thoughtness at low temperature, not only as-welded also stress relievedstate.
Used with 100%CO2
Typical Chemical Composition of All-Weld Metal (%)
C Si Mn P S Ni0.05 0.49 1.33 0.011 0.014 0.38
Typical Mechanical Properties of All-Weld Metal
Y.S T.S EL. Charpy V-notchN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%)
-30 -22 -40 -40
600(87,000) 620(90,000) 25.0 115(85) 80(59) As welded550(79,900) 580(84,200) 28.0 84(62) 50(37) PWHT(620°C@2hr)
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 7/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 8/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 9/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 10/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 11/25
181
FLUX CORED WIRE
180
FLUX CORED WIRE
SC-EG2 Cored AWS A5.26 / ASME SFA5.26 EG70T-2
JIS Z3319 YFEG-22C
Vertical-up butt welding of side shell and various inner structures of ships, plates of storage tanks,and web members of box-girders of bridges.
Applications
Characteristics on Usage
Notes on Usage
DC
Welding Position Current
CO2
Shielding Gas
Dia. (mm) 1.6 Spool (kg) 15 20(in) 1/16 (lbs) 33 44
Ball Pac
KR, ABS, BV, DNV, GL, LR,NK, CCS
Approval Packing (lncluding Ball Pac)
Sizes Available and Recommended Currents (Amp.)
Size mm (in)
V-up
1.6 (1/16)
330~420
SC-EG2 cored is a small diameter flux cored wire to be used with CO 2 shielding gas forelectrogas arc welding high speed. The arc is extremely stable and has a good bead appearance. Itprovides highly efficient welding by electro gas process.
Use 100% CO2 gas.Refer to page 168 for storage instructions.
Typical Chemical Composition of All-Weld Metal (%)
C Si Mn P S Mo
0.08 0.30 1.45 0.016 0.013 0.12
Typical Mechanical Properties of All-Weld Metal
Y.S T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%) ( ) J (ft lbs)
510 (74,000) 560 (81,300) 27 -20 (-4) 60 (44)
Supercored 81 AWS A5.29 / ASME SFA5.29 E81T1-Ni1
JIS Z3313 YFW-C602R
All position welding for construction machinery, bridge structures and storage tanks.
Applications
Characteristics on Usage
Notes on Usage
DC
Welding Position Current
CO2
Shielding Gas
Dia. (mm) 1.2 1.4 1.6 Spool (kg) 15 20(in) .045 .052 1/16 (lbs) 33 44
Ball Pac
CWB
Approval Packing (lncluding Ball Pac)
Sizes Available and Recommended Currents (Amp.)
Size mm (in)
F & HF
V-up, OH
V-down
1.2 (.045) 1.4 (.052) 1.6 (1/16)
250~300 260~320 290~350
180~230 200~260 220~280
250~310 260~320 280~340
Supercored 81 is all position flux cored wire designed for 100% CO2 shielding. You can get asmooth arc, and low spatter, good weldability. The weld metal impact value at -30°C( ) isexcellent and has a good bead appearance, slag covering is uniform and easy to remove.
Proper preheating(50~150°C)(122~302 ) and interpass temperature must be used in order to
release hydrogen which may cause cracking in weld metal when electrodes are used formedium and heavy plates.One-side welding defects such as hot cracking may occur with wrong welding parameter suchas high welding speed.Use 100% CO2 gas.Refer to page 168 for storage instructions.
Typical Chemical Composition of All-Weld Metal (%)
C Si Mn P S Ni
0.03 0.35 1.25 0.011 0.012 0.95
Typical Mechanical Properties of All-Weld Metal
Y.S T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%) ( ) J (ft lbs)
570 (82,700) 640 (92,900) 25 -30 (-22) 90 (66)
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 12/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 13/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 14/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 15/25
189
FLUX CORED WIRE
188
FLUX CORED WIRE
SC-80D2 AWS A5.28 / ASME SFA5.28 E80C-G
JIS Z3318 YFM-G
SC-80D2 can be used on high strength steel and low alloy steels in heavy industry and structuralsteel.
Applications
Characteristics on Usage
Notes on Usage
DC+
Welding Position Current
Ar+20~25% CO2
Shielding Gas
Dia. (mm) 1.2 1.4 1.6 Spool (kg) 12.5 15 20(in) .039 .045 1/16 (lbs) 28 33 44
Ball Pac
Approval Packing (lncluding Ball Pac)
Sizes Available and Recommended Currents (Amp.)
Size mm (in)
F & HF
1.2 (.045) 1.4 (.052) 1.6 (1/16)
200~310 200~340 230~360
SC-80D2 is a metal-cored gas shielded cored wire which combines the high deposition rates of aflux cored wire with the high efficiencies of a solid wire. SC-80D2 is equivalent to ER80S-D2solid wire.Provides an exceptionally smooth and stable arc, low spatter and minimal slag coverage.
It is designed for use with Ar + 20~25% CO2
Refer to page 168 for storage instructions.
Typical Chemical Composition of All-Weld Metal (%)
C Si Mn P S Mo
0.05 0.60 1.65 0.012 0.018 0.51
Typical Mechanical Properties of All-Weld Metal
Y.S T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%) ( ) J (ft lbs)
590 (85,600) 660 (95,700) 28 -20 (-4) 70 (52)
Supercored 1CM AWS A5.28 / ASME SFA5.28 E80C-G
JIS Z3318 YF1CM-G
Supercored 1CM can be used on 1.25%Cr-0.5%Mo steel. Recommended for welding of steam boilerplate and high temperature steel.
Applications
Characteristics on Usage
Notes on Usage
DC+
Welding Position(All-Position) Current
Ar+20~25% CO2
Shielding Gas
Dia. (mm) 1.0 1.2 Spool (kg) 12.5 15(in) .039 .045 (lbs) 28 33
Approval Packing (lncluding Ball Pac)
Sizes Available and Recommended Currents (Amp.)
Size mm (in)
F & HF
1.0 (.039) 1.2 (.045)
150~300 200~310
Supercored 1CM is a metal cored wire which combines the high deposition rates of F.C.W withthe high efficiencies of a solid wire. Provide exceptionally smooth and stable arc, low spatter andminimal slag coverage.
Proper preheating(130~165°C)(122~302 ) and interpass temperature must be used in orderto release hydrogen which may cause cracking in weld metal when electrodes are used formedium and heavy plates.Keep the distance between tip and base metal at about 15mm.Use Ar+20~25% CO2 gas.Refer to page 168 for storage instructions.
Typical Chemical Composition of All-Weld Metal (%)
C Si Mn P S Cr Mo
0.07 0.39 0.81 0.011 0.015 1.25 0.51
Typical Mechanical Properties of All-Weld Metal
Y.S T.S EL. Temp. CVN-Impact Value Heat TreatmentN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%) ( ) J (ft lbs) ( /hr)
560 (81,300) 630 (91,000) 20 0 (32) 90 (66) 620/1hr510 (74,100) 600 (87,100) 25 0 (32) 110 (81) 620/8hr
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 16/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 17/25
193
FLUX CORED WIRE
192
FLUX CORED WIRE
SW-308L Cored AWS A5.22 / ASME SFA5.22 E308LT1-1/-4
JIS Z3323 YF308LC
SW-308L Cored is designed for welding of 18%Cr-8%Ni stainless steels.
Applications
Characteristics on Usage
Notes on Usage
DC+
Welding Position Current
CO2
Ar+20~25% CO2
Shielding Gas
Dia. (mm) 0.9 1.2 1.6 Spool (kg) 5 12.5 15(in) .035 .045 1/16 (lbs) 11 28 33
ABS, LR, NK, BV, DNV,TÜV, CWB, Ü-SIGN, DB
Approval Packing (lncluding Ball Pac)
Sizes Available and Recommended Currents (Amp.)
Size mm (in)
F & HF
V-up OH
0.9 (.035) 1.2 (.045) 1.6 (1/16)
130~190 180~220 250~290
100~140 120~160 -
SW-308L Cored is a flux cored wire for all position welding to be used with CO2 or Argon + CO2
mixed shielding gases. This wire benefits from a fast freezing slag system which assist theoperator when welding out of position and performs equally as well when welding in the flat andhorizontal position.
Use with 100% CO2 or Ar + 20~25% CO2 gas.Refer to page 168 for storage instructions and notes on usage.
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas:100%CO2)
C Si Mn P S Cr Ni
0.03 0.65 1.45 0.025 0.010 19.5 10.0
Typical Mechanical Properties of All-Weld Metal (Shielding Gas:100% CO2)
T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) (%) ( ) J (ft lbs)
590 (85,600) 45 -20 (-4) 60 (44)
SC-91B3 AWS A5.29/ ASME SFA5.29 E91T1-B3
SC-91B3 can be used for welding of 2.25%Cr-1.0%Mo steel used for super heat tubes and steampipes of boilers for electric power plant and marine use, equipment for oil refining industries andhigh temperature synthetic chemical industries.
Applications
Characteristics on Usage
Notes on Usage
DC+
Welding Position Current
CO2
Shielding Gas
Dia. (mm) 1.2 1.4 1.6 Spool (kg) 15(in) .045 .052 1/16 (lbs) 33
Approval Packing (lncluding Ball Pac)
SC-91B3 is a titania type flux cored wire for all position welding. Arc stability is excellent.Spatter loss is low and slag covering is uniform with good removability.
Used 100% CO2 gas.All position gas shielded flux cored wire
Typical Chemical Composition of All-Weld Metal (%)
C Si Mn P S Cr Mo
0.063 0.47 0.83 0.022 0.017 2.32 0.99
Typical Mechanical Properties of All-Weld Metal
Y.S T.S EL.PWHTN/mm2 (lbs/in2) N/mm2 (lbs/in2) (%)
643 (93,300) 730 (106,000) 20 690 15 1Hr
Sizes Available and Recommended Currents (Amp.)
Size mm (in)
F
HF
V-up&OH
V-Down
1.2 (0.045) 1.4 (0.052) 1.6 (1/16)
250~300 280~350 300~450
250~300 280~350 300~450
200~260 220~260 240~280
250~300 280~350 300~450
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 18/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 19/25
197
FLUX CORED WIRE
196
FLUX CORED WIRE
SW-316L Cored AWS A5.22/ASME SFA5.22 E316LT1-1/-4
JISZ3323 YF316LC
SW-316L Cored is designed for the welding of low carbon 18%Cr-12%Ni-2% Mo stainless steel orfor the welding of dissimilar joints of stainless steel.
Applications
Characteristics on Usage
Notes on Usage
KR, ABS, LR, BV, DNVGL, TÜV ,CWBÜ-SIGN, DB
Sizes Available and Recommended Currents (Amp.)
SW-316L Cored is a flux cored wire for all position welding to be used with CO2 or Argon + CO2
mixed shielding gases. Due to ferrite content in the weld metals austenitic structure, it has excellentcrack resistance.
Use with 100% CO2 or Ar + 20~25% CO2 gas.Refer to page 168 for storage instructions and notes on usage.
Size mm (in)
F & HF
V-up, OH
Dia. (mm) 0.9 1.2 1.6 Spool (kg) 5 12.5 15(in) .035 .045 1/16 (lbs) 11 28 33
Approval Packing (lncluding Ball Pac)
DC+ CO2
Ar+20~25% CO2
Welding Position Current Shielding Gas
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas:100% CO2)
C Si Mn P S Cr Ni Mo
0.03 0.70 1.20 0.025 0.010 18.0 12.0 2.50
Typical Mechanical Properties of All-Weld Metal (Shielding Gas:100% CO2)
T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) (%) ( ) J (ft lbs)
590 (85,600) 40 -20 (-4) 50 (37)
0.9 (.035) 1.2 (.045) 1.6 (1/16)
130~180 180~220 250~290
100~140 120~160 -
SW-309MoL Cored AWS A5.22 / ASME SFA5.22 E309LMoT1-1/-4
JIS Z3323 YF309MoLC
Main uses are for the applications of resistance to heat and corrosion and for the joining of stainlesssteels to mild or low alloy steel.
Applications
Characteristics on Usage
Notes on Usage
CWB
Sizes Available and Recommended Currents (Amp.)
SW-309MoL Cored is designed for the welding of 22%Cr-12%Ni-2.5%Mo stainless steels. Thiswire has excellent crack resistance combined with good arc characteristics for the use of downhandand vertical up.
Use with 100% CO2 or Ar + 20~25% CO2 gas.Refer to page 168 for storage instructions and notes on usage.
Size mm (in)
F & HF
V-up, OH
Dia. (mm) 0.9 1.2 1.6 Spool (kg) 5 12.5 15(in) .035 .045 1/16 (lbs) 11 28 33
Ball Pac
Approval Packing (lncluding Ballpac)
DC+ CO2
Ar+20~25% CO2
Welding Position Current Shielding Gas
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas:100% CO2)
C Si Mn P S Cr Ni Mo
0.03 0.70 1.20 0.025 0.010 22.5 12.5 2.5
Typical Mechanical Properties of All-Weld Metal (Shielding Gas:100% CO2)
T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) (%) ( ) J (ft lbs)
690 (100,000) 32 -20 (-4) 40 (33)
0.9 (.035) 1.2 (.045) 1.6 (1/16)
130~180 180~220 250~290
100~140 120~160 -
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 20/25
199
FLUX CORED WIRE
198
FLUX CORED WIRE
SW-347 Cored AWS A5.22/ASME SFA5.22 E347T1-1/-4
JIS Z3323 YF347C
Main uses are for the welding of stainless steel boilers and gas turbines.
Applications
Characteristics on Usage
Notes on Usage
Sizes Available and Recommended Currents (Amp.)
SW-347 Cored is a titania type flux cored wire designed for welding of 347 and 321 type stainlesssteels.
Use with 100% CO2 or Ar + 20~25% CO2 gas.Refer to page 168 for storage instructions and notes on usage.
Size mm (in)
F & HF
V-up, OH
Dia. (mm) 1.2 1.6 Spool (kg) 5 12.5 15(in) .045 1/16 (lbs) 11 28 33
Approval Packing (lncluding Ball Pac)
DC+ CO2
Ar+20~25% CO2
Welding Position Current Shielding Gas
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas: 100% CO2)
C Si Mn P S Cr Ni Nb
0.04 0.80 1.20 0.025 0.010 19.5 10.0 0.40
Typical Mechanical Properties of All-Weld Metal (Shielding Gas: 100% CO2)
T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) (%) ( ) J (ft lbs)
610 (88,500) 45 -20 (-4) 60 (44)
1.2 (.045) 1.6 (1/16)
180~220 250~290
120~160
SW-317L Cored AWS A5.22/ASME SFA5.22 E317LT1-1/-4
JIS Z3323 YF317LC
SW-317L Cored is designed for the welding of low carbon 18%Cr-12%Ni-2% Mo and 19%Cr-13%Ni-3%Mo stainless steel.
Applications
Characteristics on Usage
Notes on Usage
Sizes Available and Recommended Currents (Amp.)
SW-317L Cored is a flux cored wire for all position welding to be used with CO2 or Argon + CO2
mixed shielding gases. Due to ferrite content in the weld metals austenitic structure, it has excellentcrack resistance.
Use with 100% CO2 or Ar + 20~25% CO2 gas.Refer to page 168 for storage instructions and notes on usage.
Size mm (in)
F & HF
V-up, OH
Dia. (mm) 0.9 1.2 1.6 Spool (kg) 5 12.5 15(in) .035 .045 1/16 (lbs) 11 28 33
Approval Packing (lncluding Ball Pac)
DC+ CO2
Ar+20~25% CO2
Welding Position Current Shielding Gas
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas: 100% CO2)
C Si Mn P S Cr Ni Mo
0.03 0.70 1.20 0.025 0.010 19.0 13.0 3.5
Typical Mechanical Properties of All-Weld Metal (Shielding Gas: 100% CO2)
T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) (%) ( ) J (ft lbs)
600 (87,000) 35 -20 (-4) 40 (30)
0.9 (.035) 1.2 (.045) 1.6 (1/16)
130~180 180~220 250~290
100~140 120~160 -
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 21/25
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 22/25
203
FLUX CORED WIRE
202
FLUX CORED WIRE
Supercored 309L AWS A5.22/ASME SFA5.22 E309LT0-1/-4
JIS Z3323 YF309LC
Supercored 309L is designed for the welding of dissimilar metals such as s tainless steel and carbonsteel or stainless steel and low alloy steels.
Applications
Characteristics on Usage
Notes on Usage
TÜV, Ü-SIGN, DB,CWB
Sizes Available and Recommended Currents (Amp.)
Supercored 309L which contains a high ferrite level in its austenitic structure has excellent heat andcorrosion resistibility. It has a good stable arc and excellent slag removal properties.
Use with 100% CO2 or Ar + 20~25% CO2 gas.Refer to page 168 for storage instructions and notes on usage.
Size mm (in)F & HF
Dia. (mm) 0.9 1.2 1.6 Spool (kg) 5 12.5 15(in) .035 .045 1/16 (lbs) 11 28 33
Approval Packing (lncluding Ball Pac)
DC+ CO2
Ar+20~25% CO2
Welding Position Current Shielding Gas
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas: 100% CO2)
C Si Mn P S Cr Ni
0.03 0.70 1.50 0.025 0.010 23.5 12.5
Typical Mechanical Properties of All-Weld Metal (Shielding Gas: 100% CO2)
T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) (%) ( ) J (ft lbs)
600 (87,000) 35 -20 (-4) 50 (37)
0.9 (.035) 1.2 (.045) 1.6 (1/16)120~180 150~220 240~300
Supercored 308L AWS A5.22/ASME SFA5.22 E308LT0-1/-4
JIS Z3323 YF308LC
Supercored 308L is designed for use in petrochemical processing, textile industries and can be usedfor welding 18%Cr-8%Ni stainless steel.
Applications
Characteristics on Usage
Notes on Usage
TÜV, Ü-SIGN, DB,CWB
Sizes Available and Recommended Currents (Amp.)
Supercored 308L for welding stainless steel has a rapid solidifying slag which enables flat andhorizontal position welding. It gives a stable arc and low spatter.
Use with 100% CO2 or Ar + 20~25% CO2 gas.Refer to page 168 for storage instructions and notes on usage.
Size mm (in)F & HF
Dia. (mm) 0.9 1.2 1.6 Spool (kg) 5 12.5 15(in) .035 .045 1/16 (lbs) 11 28 33
Approval Packing (lncluding Ball Pac)
DC+ CO2
Ar+20~25% CO2
Welding Position Current Shielding Gas
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas: 100% CO2)
C Si Mn P S Cr Ni
0.03 0.70 1.50 0.025 0.010 19.5 9.5
Typical Mechanical Properties of All-Weld Metal (Shielding Gas: 100% CO2)
T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) (%) ( ) J (ft lbs)
600 (87,000) 43 -20 (-4) 60 (44)
0.9 (.035) 1.2 (.045) 1.6 (1/16)120~180 150~220 240~300
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 23/25
205
FLUX CORED WIRE
204
FLUX CORED WIRE
Supercored 316L AWS A5.22/ASME SFA5.22 E316LT0-1/-4
JIS Z3323 YF316LC
Supercored 316L is designed for the welding of low carbon 18%Cr-12%Ni-2%Mo stainless steel orfor the welding of dissimilar joints of stainless steel.
Applications
Characteristics on Usage
Notes on Usage
TÜV, Ü-SIGN, DB,CWB
Sizes Available and Recommended Currents (Amp.)
Supercored 316L gives good arc stability and easy slag removal due to its low carbon content. Ithas excellent resistance against granular corrosion.
Use with 100% CO2 or Ar + 20~25% CO2 gas.Refer to page 168 for storage instructions and notes on usage.
Size mm (in)
F & HF
Dia. (mm) 0.9 1.2 1.6 Spool (kg) 5 12.5 15(in) .035 .045 1/16 (lbs) 11 28 33
Approval Packing (lncluding Ball Pac)
DC+ CO2
Ar+20~25% CO2
Welding Position Current Shielding Gas
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas: 100% CO2)
C Si Mn P S Cr Ni Mo
0.03 0.70 1.40 0.025 0.010 18.0 12.0 2.5
Typical Mechanical Properties of All-Weld Metal (Shielding Gas: 100% CO2)
T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) (%) ( ) J (ft lbs)
590 (85,600) 40 -20 (-4) 50 (37)
0.9 (.035) 1.2 (.045) 1.6 (1/16)120~180 150~220 240~300
Supercored 309MoL AWS A5.22/ASME SFA5.22 E309LMoT0-1/-4
JIS Z3323 YF309MoLC
Supercored 309MoL is designed for the application of resistance to corrosion and for the joining of stainless to mild or low alloy steel.
Applications
Characteristics on Usage
Notes on Usage
Sizes Available and Recommended Currents (Amp.)
Supercored 309MoL which contains a high ferrite level in austenitic has excellent heat, corrosionand crack resistibility. It has a good stable arc and excellent slag removal properties.
Use with 100% CO2 or Ar + 20~25% CO2 gas.Refer to page 168 for storage instructions and notes on usage.
Size mm (in)
F & HF
Dia. (mm) 0.9 1.2 1.6 Spool (kg) 5 12.5 15(in) .035 .045 1/16 (lbs) 11 28 33
Approval Packing (lncluding Ball Pac)
DC+ CO2
Ar+20~25% CO2
Welding Position Current Shielding Gas
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas: 100% CO2)
C Si Mn P S Cr Ni Mo
0.03 0.60 1.30 0.025 0.010 23.0 12.5 2.5
Typical Mechanical Properties of All-Weld Metal (Shielding Gas: 100% CO2)
T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) (%) ( ) J (ft lbs)
600 (87,000) 35 -20 (-4) 50 (37)
0.9 (.035) 1.2 (.045) 1.6 (1/16)120~180 150~220 240~300
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 24/25
207
FLUX CORED WIRE
206
FLUX CORED WIRE
SF-430 AWS A5.9/ASME SFA5.9 EC430
Typical Mechanical Properties of All-Weld Metal (Shielding Gas: 100% Ar)
T.S EL. Temp. CVN-Impact ValueHeat Treatment
N/mm2 (lbs/in2) (%) ( ) J (ft lbs)
770 (1418 )x4hr500 (72,600) 40 - - FC to 600 (1112 )
AC to RT
SF-430 is a metal cored wire for horizontal, fillet and flat position welding of 409 and 430 typestainless steel as found in ferrite stainless steel automotive mufflers.
Applications
Characteristics on Usage
Notes on Usage
Sizes Available and Recommended Currents (Amp.)
This wire gives excellent bead appearance and provides the operator with a soft stable arc and verylow spatter levels thus giving enhanced cosmetic appearance.
Use welding grade Ar or Ar + 2~5%O2 gas.
Size mm (in)
F & HF
Dia. (mm) 1.2 Spool (kg) 12.5 15(in) .045 (lbs) 28 33
Approval Packing (lncluding Ball Pac)
DC+ Ar
Ar+2~5% O2
Welding Position Current Shielding Gas
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas: 100% Ar)
C Si Mn P S Cr Ti
0.03 0.30 0.50 0.005 0.010 17.5 0.70
1.2 (.045)150~250
SF-409Ti AWS A5.9/ASME SFA5.9 EC409
SF-409Ti is a metal type flux cored wire designed for the horizontal fillet welding of AISI 409ferrite stainless steel.
Applications
Characteristics on Usage
Notes on Usage
Sizes Available and Recommended Currents (Amp.)
This wire has been specifically formulated for use in the welding of automotive exhaust systemsand mufflers. It benefits from being spatter free and without slag formation when used with argonor argon oxygen mixed shielding gas. It also has an excellent deposition rate and corrosionresistance. High speed welding can be carried out with this product on thin plate material withoutburning through. SF-409Ti can be used in the welding of similar chemical composition alloys.
Use welding grade Ar or Ar + 2~5%O2 gas.
Size mm (in)
F & HF
Dia. (mm) 1.2 Spool (kg) 12.5 15(in) .045 (lbs) 28 33
Approval Packing (lncluding Ball Pac)
DC+ Ar
Ar+2~5% O2
Welding Position Current Shielding Gas
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas: 100% Ar)
C Si Mn P S Cr Ti
0.03 0.50 0.55 0.012 0.010 12.5 1.0
Typical Mechanical Properties of All-Weld Metal (Shielding Gas:100% Ar)
T.S EL. Temp. CVN-Impact ValueN/mm2 (lbs/in2) (%) ( ) J (ft lbs)
500 (72,600) 20 - -
1.2 (.045)150~250
7/28/2019 Catalogo de Arames Tubulares (Hyundai)
http://slidepdf.com/reader/full/catalogo-de-arames-tubulares-hyundai 25/25
209
FLUX CORED WIRE
208
FLUX CORED WIRE
SC-439Ti Cored
SC-439Ti Cored is a metal cored wire designed for flat and horizontal fillet welding of AISI 439ferrite stainless steel.
Applications
Characteristics on Usage
Notes on Usage
Sizes Available and Recommended Currents (Amp.)
This wire has been specifically formulated for use in the welding of automotive exhaust systemsand mufflers. It benefits from being spatter free and without slag formation when used inconjunction with argon or argon oxygen mixed shielding gas. It also has an excellent depositionrate and corrosion resistance. High speed welding can be carried out with this product on thin platematerial without burning through. SC-439Ti cored can used in the welding of similar chemicalcomposition alloys.
Use welding grade Ar or Ar + 2~5%O2 gas.
Size mm (in)
F & HF
Dia. (mm) 1.2 Spool (kg) 12.5 15(in) .045 (lbs) 28 33
Approval Packing (lncluding Ball Pac)
DC+ Ar
Ar+2~5% O2
Welding Position Current Shielding Gas
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas: 100% Ar)
C Si Mn P S Cr Ti
0.03 0.30 0.60 0.005 0.010 18.5 0.75
1.2 (.045)
150~250
Typical Mechanical Properties of All-Weld Metal (Shielding Gas: 100% Ar)
T.S EL.Heat Treatment
N/mm2 (lbs/in2) (%)
770 x4hr FC to 600
500 (72,600) 40 AC to RT
SF-436
SF-436 is a metal cored wire for horizontal, fillet and flat position welding of 409,430 and 436 typestainless steel as found in ferrite stainless steel automotive mufflers.
Applications
Characteristics on Usage
Notes on Usage
Sizes Available and Recommended Currents (Amp.)
This wire gives excellent bead appearance and provides the operator with a soft stable arc and verylow spatter levels thus giving enhanced cosmetic appearance.
Use welding grade Ar or Ar + 2~5%O2 gas.
Size mm (in)
F & HF
Dia. (mm) 1.2 Spool (kg) 12.5 15(in) .045 (lbs) 28 33
Approval Packing (lncluding Ball Pac)
DC+ Ar
Ar+2~5% O2
Welding Position Current Shielding Gas
Typical Chemical Composition of All-Weld Metal (%) (Shielding Gas: 100% Ar)
C Si Mn P S Cr Mo Ti
0.03 0.60 0.40 0.008 0.010 17.5 1.0 0.40
1.2 (.045)
150~250
Typical Mechanical Properties of All-Weld Metal (Shielding Gas: 100% Ar)
T.S EL. Temp. CVN-Impact ValueHeat Treatment
N/mm2 (lbs/in2) (%) ( ) J (ft lbs)
770 x4hr500 (72,600) 35 - - FC to 600
AC to RT