CURRICULUM VITAE - JRO Inglês Fev_2016 Rev. 16

Europass Curriculum Vitae

Personal information

Surname(s) / First name(s) Rollo, José Carlos Address(es) Rua Álvaro de Castelões, nº 673, Hab. 3.1

4200-047 Porto - Portugal Telephone(s) +351 22 502 16 53 Mobile +351 91 465 22 26

E-mail [email protected]

Nationality Portuguese

Date of birth 25th July 1960

Gender Male

Work experience

Dates Occupation or position held

From February 2015 Engineer Director

Main activities and responsibilities Engineering studies, Project Coordination, Technical Proposals Name and address of employer Contretal SPA, Oran/Alger - Algeria

Type of business or sector Oil & Gas (Engineering, Equipment Construction and EPC Projets)


From November 2010 to January 2015 Engineer Consultant at AMAL SA

Main activities and responsibilities Project Coordination Name and address of employer AMAL - Construções Metálicas, SA – Chão Duro - Moita - Portugal

Type of business or sector EPC Projects and Equipment Construction


From October 2010 Engineer Consultant CEO ( Project Management , Coordination and Formation)

Main activities and responsibilities Technical Proposals, Project Management and Project Coordination Name and address of employer Rua Álvaro de Castelões, nº 673, Hab. 3.1

4200 - 047 Porto Type of business or sector Since 2010, Engineering , Consultancy and Systems Integration Freelancer whose main goal is to

provide its clients with the best engineering solutions with guarantee of quality and independence.

Dates From October 2010 Occupation or position held Colecção Imagens JCR CEO

Main activities and responsibilities Photography manager, photographer, web site conception and management.

Page 1 / 18 – Feb. 2016 Curriculum vitae of Rollo, José Carlos

For more information on Europass go to http://europass.cedefop.eu.int © European Communities, 2003 20051110

mailto:[email protected]

Name and address of employer Colecção Imagens JCR (Trademark) Rua Álvaro de Castelões, nº 673, Hab. 3.1 4200-047 Porto http://www.coleccaoimagensjcr.com

Type of business or sector

Founded in 2010, Colecção Imagens JCR ( trademark since 2011) is a Photography Service provider Whose main goal is to provide its clients with Underwater Photography, Pet Photography, Industrial Photography and Architectural Photography, among others photography areas.

Dates From August 2006 to September 2010

Occupation or position held Rail Road (Metro do Porto) Maintenance Supervisor Manager Main activities and responsibilities Team Leader for the supervision of Metro do Porto Rail Road Fixed Installations Maintenance.

Name and address of employer SENER (SENERPOR) - Engenharia e Sistemas Industriais, Lda.

Av. D. João, Lote I.06.2.3 - 6º PArque das Nações 1999-090 Lisboa


Dates

Occupation or position held

Main activities and responsibilities

Name and address of employer


Founded in 1956, SENER Ingeniería y Sistemas S.A. is an engineering, consultancy and systems integration company whose main goal is to provide its clients and society at large the most efficient technological solutions, backed up by its personal trademarks of innovation and a guarantee of quality and independence. From 2002 to 2006 Coordinator Engineer for Electromechanical Works & Consultant Technical Coordination for Underground and Surface Stations, Tunnels and Surface Lines for Metro Systems. Balfour Beatty Rail, SpA – Sucursal em Portugal (BBRail) Normetro ACE (Normetro) – Technical Department Rua Actor Ferreira da Silva, 100 4200 Porto – Portugal Balfour Beatty Rail is a Rail Engineering Company projects and Service Provider for Rail Infrastructure activities from High Speed Rail to Mass-Rapid Transit. In Portugal, BBRail S.p.A. is responsible for a several Electromechanical Works for Metro do Porto Project.


Dates





Balfour Beatty Rail is a Rail Engineering Company projects and Service Provider for Rail Infrastructure activities from High Speed Rail to Mass-Rapid Transit. In Portugal, BBRail S.p.A. is responsible for a several Electromechanical Works for Metro do Porto Project. From 2000 to 2002 Coordinator Engineer for Electromechanical Works Technical Coordinator for Underground and Surface Stations, Tunnels and Surface Lines for Metro Systems. PSGO – Projectos, Serviços e Gestão de Obras, Lda (Outsourcing to Normetro and BBRail) Rua D. Afonso Henriques, 55, r/c Barreiro Consultant, Engineering and Construction Management (Service provider of activities such as studies and projects for Industrial Plants, Infrastructures and Buildings).



Dates





Dates





Dates




From 1990 to 2000 Technical Engineer - Project Coordination (internally and with the Owner); - Project Teams management; - Deputy Director for Lusotecna Mechanical Department Directorate - Projects and Tenders Management Direction; - Member of the Technical Committee for the European Standardization of Under Pressure Vessels

(CT111); - Pressure Vessels’ Project, in accordance to BS 5500, ASME VIII - DIV.I, SPVC, CODAP; - Tanks’ Project API 620/650; - Heat Exchangers’ Project (thermal and mechanical calculation), - Equipments Licensing (Pressure Vessels) and respective installation; - Demand; - Tender’s Technical Analysis; - Design of LPG systems, HVAC, fire fighting systems, other fluids system; - Mechanical equipments design; Lusotecna – Consultores Técnicos e Industriais, S.A. (Later named as Technip Portugal and presently as Technoedif) Estrada de Alfragide, 92 2610-015 Amadora; Portugal Consultant, Engineering and Construction Management (Service provider of activities such as studies and projects for Industrial Plants, Infrastructures and Buildings). From 1987 to 1990 Technical Engineer (Technical Department) - Works Supervision; - Metal and mechanical Works Surveyor; - Production and Maintenance Supervision; - Pressure Vessels Project, in accordance to BS 5500, ASME VIII -DIV.I, - Heat Exchangers’ Project (thermal and mechanical calculation), as per TEMA and ASME VIII, DIV.I; - HVAC Units Design and construction - Fuel Vessels Design and construction supervision - Steel Structures, - Proposal for Equipment and other metallic works - Under Pressure Vessels Licensing Sandometal, Lda. Estrada Nacional nº 10 - Km 127,600 2615-133 Alverca do Ribatejo Manufacture of Pressure Vessels, Fuel Vessels, HVAC Units and Ducts (Rectangular, Spiro and Spiroval) and other kind of metallic works. From 1985 to 1987 Technical Engineer (Technical Department) Second Department of the Naval Infrastructures’ Directorate Portuguese Navy - HVAC Design, Software Routines for Marine Maintenance Data Base, - Fire Fighting Design - Fluids Networks (Oxygen, water, others) - Tender analysis - Construction supervision DIN – Direcção de Infraestruturas Navais – Ministério da Marinha Praça do Comércio 1100-148 Lisboa




Dates





Education and training

Navy Year of 1985 Trainee (Training period – 4 months) Manufacture organization RALL – Technical Department (organized by IAPMEI - Instituto de Apoio às Pequenas e Médias Empresas e ao Investimento) Recardães – Águeda Manufacture of Office metal furniture.

Dates 1984

Title of qualification awarded Mechanical Engineering - Applied Thermodynamics Name and type of organization

providing education and training FCTUC – Faculdade de Ciências e Tecnologia da Universidade de Coimbra Other relevant training courses

- “Chaine de L’Ingenierie” – course organized by Technip, in Paris (1999); - “Project Management” – also organized by Technip in Paris (1999); - “Industrial Project Management” - at Sociedade Geral de Consultoria Empresarial, Lda (1996); - “Air Conditioning - Air supply in all air and air-water systems” organized by Sandometal (Mr. W. P.

Jones, 1989); - Analysis and Prevention Actions on Mechanical Equipments Rupture” – at C.E.M.U.L. (1987); - “Heater Exchangers Shell & Tube” by CENERTEC (Engineer Higino Rodrigues, 1987); - “Basic Course on Hydraulic Oil” – at Gustavo Cudell, Lda. (1986); - “Energy Management” – at Ordem dos Engenheiros (Portuguese Engineering Association,

1984); - “Pneumatic Transportation” – organized by the Mechanical Engineering Autonomous Department

(Professor Janeiro Borges, 1984); - PMF – Project Management Framework – organized by AVENTIA (August 2010) – Certification nº

PPM10216; - PMS – Project Management Simulation – organized by AVENTIA (August 2010) – Certification nº

PPM10216; - Professional Photography - April 2012- organized by IPF-Porto (Instituto Português de Fotografia do

Porto); - CCP - Trainer certificate with pedagogical skills - July 2012 - organized by IAC (Instituto de Artes e

Ciências, Porto). - Smoke Exaust "DESENFUMAGEM - Controlo do Fumo em Incêndios nos Edifícios" - organized by

CESU/Cenertec (Engineer Carlos Martins Pereira, June 2013).

Personal skills and competences

Mother tongue(s) Portuguese

Other language(s) Self-assessment Understanding Speaking Writing European level (*) Listening Reading Spoken interaction Spoken production

English (1) B1 Independent User B2 Independent User B2 Independent User B2 Independent User B2 Very Good

French B1 Independent User B2 Independent User B2 Independent User B2 Independent User B2 Very Good



(*) Common European Framework of Reference for Languages (1) Upper Waystage 3 and Business of General Management at the Wall Street Institute (July 2010).

Social skills and competences

Organizational skills and competences

- Team spirit, acquired through my work experiences and leisure occupations; - Good managing skills, through work experience; - Good ability to adapt to multicultural environments, not only through my work experience with many

people/companies from different nationalities/cultures, in various locations, but also due to the many leisure travels abroad;

- Good communication skills gained through my work experience in general and travels abroad; - Good public communication skills acquired through seminars and lectures; - Good relationship with all entities with whom I’ve worked, namely from recent work: EDP Norte,

DGE-Delegação do Norte, Architect Teams such as Souto Moura, Siza Vieira, Alcino Soutinho, Fernando Távora, Adalberto Dias and João Álvaro Rocha; Leadership (wide experience in managing project and technical teams);

- Sense of organisation (experience in logistics and project management/coordination tasks); - Good experience in project and team management; - Good experience in licensing and European standardization procedures, gained through my work

experience.

- Leadership (wide experience in managing project and technical teams); - Sense of organisation (experience in logistics and project management/coordination tasks); - Good experience in project and team management; - Good experience in licensing and European standardization procedures, gained through my work

experience.

Technical skills and competences Good command of all technical issues concerning the various projects I was involved in, from which I would point out the following areas:

Electromechanical works, Thermal and Mechanical works.

Computer skills and competences - Machinery Numbering Command; - Basic Programming; - Windows 98, XP; - Microsoft Office for Windows (Word, Excel, Outlook, PowerPoint); - Triflex (Piping Flexibility Calculation); - Tri*Therm (Thermal Calculation of Heat Exchangers); - BJAC – Thermal and Mechanical Calculation of Aspen Technology Heat Exchangers - WINMAC – Maintenance Management Software from Metro do Porto (as user) - Adobe Photoshop CS6 - Adobe Premiere - Proshow Producer These skills were acquired both via training and work experience. -



Other skills and competences Further knowledge of foreign languages: Italian – sufficient oral comprehension Spanish – sufficient oral comprehension

Associations: Ordem dos Engenheiros Member nº 14111 Professional Engineering Licence nº 19619 (by Ordem dos Engenheiros) LPG Designer Licence nº 00658 (By DGE – Direcção Geral de Energia) ASME member nº 8969321 (Not up to date) ASHRAE member nº 08079882 (Not up to date) FPAS member (Portuguese underwater activities Federation) Padi Advance Open Water scuba dive member (by PADI) SSI Master Dive National Underwater Photography Juriman (nº000037), by FPAS

Driving licence Category A1, A, B and BE

Additional information My hobbies and main interests are: - Scuba diving (diver card: Master Dive by SSI); - Photography, namely under water; - Tennis/Table Tennis; - Swimming; - Travelling.

Annexes - Detailed description of all projects/works performed, per entity as well as additional training and seminars,

- Letter of recommendation.



ANNEX

to

“CURRICULUM VITAE”

JOSÉ CARLOS VARELA PINTO GARCIA ROLLO February 2016



Additional Training

- Conferences cycle on Combustion – promoted by the Mechanical Engineering Autonomous Department of FCTUC and lectured by Professor Numa Manson (1983);

- European Congress on Economics and Management of Energy in Industry, promoted by E.C.E.M.E.L (1984); - Conference on Air Conditioned, organized by the Autonomous Section of Mechanical Engineering of FCTUC and

lectured by W. P. Jones (1984); - Colloquium-Debate on “Natural Gas in the Portuguese Energy Context”, organized by APE – Associação Portuguesa

de Energia (Energy Portuguese Association) ( 1994 ); - “O Vapor e a Conservação de Energia na Indústria” (Steam Water and Management Energy in Industrial Plants),

promoted by Spirax Sarco (1998); - Seminar “How to Stay Out of Jail”, promoted by Normetro, and lectured by Professor Arnold Dix (2004). - Training on Health & Safety at Balfour Beatty Rail, by Doctor Ponce Leão Oliveira (2004). - Training on Health & Safety at SMGP, coordinated by Mr. Manuel Freitas (2006). - Metro Rail Road Systems Infrastrutures Maintenance Course – Organized by TMB – Transportes Metropolitanos de

Barcelona – January until Mars 2007, Barcelona, done in two phases : 1ª Phase on Mars/April 2007 – Barcelona; 2ª Phase on January 2008

- Technical Seminary : Design : Innovation and Competitive ; Organized by Newsletter “Robótica”; at 14 May 2008, at Biblioteca Municipal de STª Maria da Feira

- ANPCF – Associação Portuguesa para a Normalização e Certificação Ferroviária – Conference about High Speed Design in Portugal,on 30 de June 2008, at Auditório da FEUP

- Rail Road Advanced Formation Cicle – 7/8 de July 2008 – FEUP – Porto - "O PROJECTO DE EXPANSÃO DO METRO DO PORTO / Metro do Porto Expansion Design"; Organized by Ordem

dos Engenheiros, on 18 November 2008, at Auditório da Fundação de Cupertino de Miranda, Porto - VII Seminary- Rail Road Certification and Standardization ; 27 November 2008, at Auditório do Instituto Português de

Qualidade – Monte da Caparica; Organized by ANPCF – Associação Portuguesa para a Normalização e Certificação Ferroviária

- Maintenance Total Costs; 01 and 02 June 2009; Organized by CENERTEC, at Hotel EGATUR MAIA, and lectured by Eng. Nelson Mendonça

- “ 9ªs Jornadas de Climatização – Energy efficiency on HVAC and Safety National Rules”; 15 October 2009, at Auditório of Ordem dos Engenheiros, Lisbon, promoted by HVAC Engineering Specialty Executive Comity in association with Portuguese Sections of ASHRAE and REHVA

- PMF – Project Management Framework, by AVENTIA – August 2010 - PMS – Project Management Simulation, by AVENTIA – August 2010 - Professional Photographer - organized by IPF - Instituto Português de Fotografia do Porto -Since april 2012

Lectures

- ENEEM I (March 2006) - Encontro Nacional de Estudantes de Engenharia Mecânica (First National Meeting of Mechanical Engineering Students):

o Speaker on the “Professional Options in the Project Area”, in the Mechanical Engineering Department of

Coimbra University. Reference Projects Portuguese Navy (1985 - 1987): Collaboration in Projects and Supervision of Fluids Networks and HVAC, in various units:

- Navy Hospital - CITAN - Continent Marine Corps - Maritime Defence Force Unit of Lisbon Harbour - Group nr. 2 of the Escolas da Armada (Navy Schools)

CREDITO PREDIAL PORTUGUÊS (1987): Collaboration, with “Condar” in the design of the HVAC system for the 4th floor of Rua do Ouro, Lisbon.



SANDOMETAL, Lda. (1987 - 1990):

- Design, Project, Production Supervision and Licensing of Pressurized Vessels (Compressed Air, Water, Ammoniac, Nitrogen, LPG, Refrigerating Fluids, Vacuum, U Tube Assembler Heat Exchangers);

- Design, Project and Production Supervision of HVAC Treatment Units; - Production Supervision HVAC metallic ducts (rectangular, spiro and spiroval as per SMACNA Construction

Standard); - Production Supervision of various Metal and Mechanical Works (e.g. Rolling Bridges, Metallic Structures, Cooling

Tanks, etc.); QUINTA DO MONTALEGRE (1990):

- Collaboration, with “Condar” as a Freelancer, in Design and Project of the HVAC System for the Cafeteria, Restaurant and dancing areas.

AGROPROMOTORA - ASSOCIAÇÃO PARA O DESENVOLVIMENTO DO ALTO TÂMEGA (1997 & 1998) :

- Design, as a Freelancer, of Networks’ Fluids (Compressed air, LPG, Steam and Steam Condensates and Hot Water), HVAC and Industrial Ventilation for the Project “ Projecto Tipo de Unidades Industrial de Enchidos Tradicionais”.

- Design, as a Freelancer, of Air Compressed (High and Low pressure) Central Plant and respective Network for the Project “Linha de Enchimento de Água Mineral - Angola”.

SANDOMETAL, Lda. ( 1990 - 1996)

- Design of several Under Pressure Vessels, as a Freelancer. SITTEL (1997 & 1999) :

- Fábrica de Vila Velha de Rodão (Portucel Tejo) : Piping diameters, Fluid velocity, Pressure loss and NPSH(av.) checking for the circuits of :

o Refrigerating circuit of TG2 and new Condenser; o Refrigerating circuit of the surface condenser and terebinthina condenser lines ; o Condensates of the new Condenser; o Steam circuit of the new condenser.

- Design of a Fuel Horizontal Vessel (150 m3 for Jet A1 ) according with Code ASME, as a Freelancer, for the Stª Catarina Airport – Funchal (Madeira).

SINGLE FAMILY RESIDENCE - (1999) :

- Natural Gas Network Design for a Single Family Residence at Odrinhas - Sintra LUSOTECNA S.A, (1990 - 2000):

Main projects, at Lusotecna service: - SIDERURGIA NACIONAL - SEIXAL (Billets’ Inspection and Reconditioning - I.R.B.) (1990/91):

o Design and Project of Machinery and Fluids (piping); o Project Team Leader for Mechanics; o Project coordination (between specialities); o Demand and Technical/Commercial analysis of Tenders.

- FORD ELECTRONICA PORTUGUESA (1990): Page 9 / 18 – Feb. 2016 Curriculum vitae of

Rollo, José Carlos For more information on Europass go to http://europass.cedefop.eu.int © European Communities, 2003 20051110

o Fluids Network Design and Project (Compressed Air, Vacuum and Propane); o Collaboration in the Fire Protection Network.

- TPL (Technip Group) / ABB LUMMUS - NESTE POLIMEROS SA (1990/91):

o Piping Stress Analysis (Flexibility Calculations); o Quality Control of Piping Stress Analysis Calculation Notes.

- QUIMIGAL (1991):

o Collaboration on the Conceptual Design of the “Fertilizer Shed”.

- METROPOLITANO DE LISBOA - PMOII (1992):

o Conceptual Design and Detail Design of the City Gas Network.

- FORD/VW (1992):

o Design, Project and Coordination of the Fluids Network (Compressed Air and Air mixed with propane); o Coordination of the Fire Protection System Project.

- TECHNIP - PETROGAL, SA (SINES REFINERY- CRACKING COMPLEX) (1992 /1993):

o Project Team Leader for Mechanics/Piping, which included three engineers and 30 project designers.

- ELF, Lubrificantes (1993):

o Cost estimate preparation for the “Production Plant moving”).

- METROPOLITANO DE LISBOA – PMOII e Centro Comercial da estação de Metro do Campo Grande (1993/1994):

o Project/Works Director Deputy o Project and Construction Coordination. Note: Lusotecna was integrated in a Consortium (ACE), with Sofrerail and Sofretu companies

- SOPORCEL (1994):

o Collaboration in the Project Design for the “Precipitate calcium carbonate in Soporcel Plant.”

- A.SILVA MATOS (1994):

o Thermal Balance Execution for the “New Surface Condenser” for Portucel – Setúbal Production Unit.

- PETROGAL, S.A (1994):

o Design of the Conceptual Design “Improving Works of the Cooling, Overhead-Product and Preheating Crude Systems” of Sines Refinery.

- S.F.I.R, S.p.a. - Societa Fondiaria Industriale Romagnola (1994):

o Environmental Impact Study analysis – Waste Gases of Coruche Sugar Plant through Beetroot:



• Preparation of the Project Specification/Design for the Fire Protection System for the Buildings 25, 28, 37 and 40 of the Sugar Plant of Coruche;

• Participation in the preparation of the HVAC Project Specification/Design for Buildings 25, 28, 37 and 40 of the Sugar Plant of Coruche.

• Preparation of the Licensing Procedures for the Fuel Tanks installation.

- FAP – National Defence Ministry – Air Force (1994): o Collaboration on the design of the Tender for “Auditing and Rationalization Plan for the Energy

Consumption in BASE – Monte Real.”

- ISQ - Instituto de Soldadura e Qualidade (1994 a 2000): o Member of Lusotecna Technical Committee for the European Standardization for Under Pressure Vessels

(CT 111);

- SN - Siderurgia Nacional (1994):

o Fluids layout analysis (raw and drinking water) from SN to the future New Bridge Site to be installed in the property of Siderurgia Nacional.

- PETROGAL, S.A. - Matosinhos Refinery (1994):

o Participation in the Tender for the "Construction of Four New Bottoms Loading Stations for Tank Vehicles and a Waste Gas Treatment System".

- PORTUCEL (1994):

o Elaboration of the Tender document for the Mechanical Assembly in the scope of Portucel Optimization Project.

- MONENCO AGRA Inc. (1994/1995):

o Implementation Study for the “Tie-ins” in the Tank Area of Petrogal, S.A. – Sines Refinery and piping lay-out between this area and the future Pumping Main Station of "Multiproduct Pipeline Sines/Aveiras".

- PORTUCEL (1995):

o Execution of the Flexibility Calculation of one Low Pressure Vapour in the scope of Portucel Optimization Project.

- Parque Expo'98 (1995):

o Participation on the Tender preparation for the Project of Design, Construction and Exploitation of the Hot-and-Cold Central Water Plant.

- APS - Administração do Porto de Sines (1995):

o Preparation of the Basic Engineering for the Changes Study of the Movement Circuits and Marine Fuel (Diesel, Crude Oil, Jet-Fuel, Gasoline, Raw water) Loading Arms and respective Tender document (technical chapter).

- CMP - Pataias (1995):

o Collaboration in the preparation of the Tender for the Modernization of Lines 2 and 3.

- JOSÉ MARQUES AGOSTINHO & FILHOS, Cia. Lda. (1995):



o Participation in the Tender design, including the Conceptual Design for the preparation of the New

Installations Project of the Vinegar and Sparkling Wine.

- VINACIMEX (VNCC) (1995):

o Project Director for the Detail Engineering of the Project "But Son Cement Plant 40000T/D - VIETNAM" which included civil (structures and drainage), architecture, lighting and power supply, instrumentation and Mechanics.

o Mechanics Leader for the Detail Engineering of the Project "But Son Cement Plant 40000T/D - VIETNAM".

- PETROGAL – Sines Refinery (1995):

o Elaboration of the Flexibility calculations regarding various Interconnection Lines of three Propylene Sphere Pressure Vessels and New Butane and Propane Heat Train.

- PORTUCEL, Empresa de Celulose e Papel de Portugal Centro Fabril de Cacia.

o Preparation of the Flexibility Calculation for the High Pressure Vapour Line.

- SOTREPE (1995/96):

o Project Director of the Detail Engineering, involving Lighting and Power Supply, Instrumentation, Civil and Mechanics.

o “Piping” Leader for the Extension of the Tanks Trucks Filling Lines of Petrogal – Sines Refinery.

- QUIMIGAL ADUBOS (1996):

o Elaboration of the Tender for the Study of the Change of one Air Cooler.

- JORDAN CEMENT FACTORIES (1996):

o Preparation of the Turn-key Tender for the “Clinker transportation and warehousing”.

- QUIMIGAL ADUBOS (1996): o Elaboration of the Thermal and Mechanical Project of the Heat Exchanger 5601C.

- PETROGAL, Sines Refinery (1996):

o Study of the Applicable Efforts in the Tubulures of CE-P6 and CE-P9 Equipments.


o Project Direction and Elaboration of the Detail Project of the New Crude Oil Line of 48’’ between the Rooting and Oil Tank service station nº 2.

- PETROGAL – Sines Refinery (1996):

o Study elaboration for the Supply of "Spring Hangers".

- BOREALIS POLIMEROS, S.A. (1996): o Project management and elaboration of the Feasibility Study of the Warehousing Extension of HDPE and

LDPE.



- ITN (Portuguese Nuclear Institute) (1996):

o Conceptual and Detail Design of the Mechanical Project of one Chamber for Neutrons Detector and Drive Mechanisms.

- FWCEE - VALORSUL (1996/1997/1998) – Project of "S. João da Talha Incinerator":

o Coordination of the Detail Engineering involving the works of Lighting and Power Supply, Instrumentation, Civil (Structures and Drainage) and Mechanics.

o “Piping” and Mechanics (equipments) Team Leader, which included two engineers and 30 designers. o Calculation of API 650/620 Tanks and Under Pressure Vessels according with ASME VIII DIV. I.


o Member of the Committee for the APS Tender Analysis, covering the Detail Engineering and Construction for the Changes in the Movement Circuits and the Replacement of the Oil Tanker Maritime Fuel Loading Arms.

- BOREALIS POLIMEROS, S.A. (1997):

o Mechanical and Thermal Calculation of the Heat Exchanger E-7004; o Elaboration of the Licensing Procedures of various equipments (Under Pressure Vessels and Heat

Exchangers); o Preparation of the Licensing Procedure for the “C3-Splitter” (2nd. Phase) Project Installation;

- BOREALIS POLIMEROS, S.A. (1997/1999):

Project Director of the Contract between Lusotecna and Borealis "SERVICE ENGINEERING AGREEMENT", under which scope various projects were developed, including: o Check of the Pots D1119/2119 to the new work conditions; o Fix Sprinklers System for MTBE; o Recovering of the Ventilation Gases of C-2003 Compressor; o Dime Burning directly in main boilers; o Sampling procedure in the Compound Warehousing Bunkers; o Change of AT Pumps; o Revamping of the Sampling Systems of Line 2 of PEBD; o "Low Polymer Handling System"; o Analysers Installation in Line (Spectrometer); o Fire Detectors and Video #80 Compounding; o Change of the water drainage system of the C-0720 sealing; o "Automatic Fire Fighting Foam System for Gasoline and Naphtha Tanks"; o Automation of the Blow-Down System; o Change of location of the PCI; o Mechanical Stress Evaluation in Equipments E-4001/2 e E-5603 A+B; o Control Rooms Centralization; o Improvement of the Butil-acrilate System; o Propylene Condensers – Sines Oil Tanker Terminal; o “Blue Pipes” Construction Supervision; o P2601 Transference; o D1001 Transference;

- SOLVAY PORTUGAL - Stª IRIA AZÓIA (1998/1999):

o Director of the Turn-key Tender for the Detail Project and Construction of the New Plant for the extension of CLS Unit;

o Project Director for the Detail Engineering (Piping; mechanical equipments, lighting and power supply, instrumentation, architecture and Civil) and Civil Works supervision for the New Plant for the extension of CLS Unit.



- SOLVAY PORTUGAL – Stª IRIA AZÓIA (1999/2000):

Project Director of the Contract between Lusotecna and Solvay Portugal, under which scope various projects were developed, including:

o CB / SO 700 – Installation of Series 8 of carbonizing batch reactors for Solvay process soda ash plant; o AS / CLC 98 – Sodium Chloride Feeder Installation; o FCH5 / SO 700 – Lime Furnace nº 5; o ED / SO 700 – De-mineralised Water; o SD / SO 700 – Heavy Ash; o Stª Olaia Quarry – Track Change of the municipal roads between Stª Eulália and Stª Cruz.

PSGO – Projectos, Serviços e Gestão de Obras, Lda. (2000 - 2002):

2000 – member of the Technical Staff of PSGO performing electromechanical coordination tasks in Normetro and afterwards transferred to ABB Dacom (outsourcing). 2002 – end of contract with PSGO; start acting as Consultant for ABB Dacom (presently Balfour Beatty Rail S.p.A., Sucursal em Portugal), with the same technical tasks in Normetro and Balfour Beatty.

Reference tasks:

- Normetro Technical Coordinator (Electromechanical), for Surface and Underground Lines of the Oporto Metropolitan Area and later transferred to one of the partners of the Normetro Consortium, ABB Dacom (presently Balfour Beatty Rail), due to internal reorganization of Normetro.

- METRO DO PORTO NETWORK (since 2000): Technical Coordinator for the Electromechanical Works of

Normetro and Balfour Beatty Rail, including the interface with the Architecture and the Owner, namely concerning the following areas:

o Vehicle; o Standard Ventilation System and Underground Stations and Tunnels Smoke Exhaust Ventilation; o HVAC Systems; o Pumping Systems; o Escalators and Elevators; o Fire Fighting Networks Systems; o Fire Detection and Automatic Extinguish Systems; o Lighting and Power Supply; o Traction Substations and Catenary; o Ticketing; o Telecommunication and Transmission Systems: Ordinary, Emergency and Public Telephones, Sound

System, Visual Public Information, Optical Fibre and CCTV; o Advertising Rear Screen Projection Systems; o Coordination of Licensing and Inspection Procedures for Electrical Installations (Traction Substations;

Transformer Cabinets; Catenary; LV and MV Networks); o Design (collaboration with architecture) of Metro underground and surface stations; o Collaboration and attendance in various tests (simple and integrated) for the specialities of Ventilation,

Escalators, Pumping and Lighting and Power Supply; o Electromechanical Spare Parts coordination; o Electromechanical As-Built documents coordination.

METRO DO MONDEGO NETWORK: Technical Coordinator for Electromechanical works of Balfour Beatty S.p.A, concerning the Tender for the Mondego Light Rail System (public tender on hold).



SENERPOR / EFOM / EGF ( From August 2006 to September 2010):

Team Leader for the supervision of Fixed Installations Maintenance, which are done by Normetro ACE, Responsible for Operation and Maintenance of the System Metro do Porto, including the interface with Construction and Design Supervision Teams for the same installation. Its also included the management of all Vandalism Actions. The Fixed Installations concerns the following areas :

Standard Ventilation System and Underground Stations and Tunnels Smoke Exhaust Ventilation; HVAC Systems; Pumping systems (Drainage and Sewage Waters); Escalators and Elevators; Fire Fighting Networks Systems; Fire Detection and Automatic Extinguish Systems; Lighting and Power Supply; Traction Substations and Catenary; Ticketing; Telecommunication and Transmission Systems: Ordinary, Emergency and Public Telephones, Sound System, Visual Public Information, Optical Fibre and CCTV; Platform and Rail Road Drainage Building Systems (Buildings, Platform and Rail Road); Buildings, Tunnels, Bridges and other Civil Constructions; Publicity Projection Systems;

As Consultant Engineering :

- GALP ENERGIA (2010) – Fuels Stocking Area and GPL (2000 m3) and a GPL Botles Filling Center: Studies colaboration in Conception and detail engineering as a consultant at AMAL, S.A.

- GALP ENERGIA - Leça da Palmeira Refinery (2010-2012) – VUVB Unit: - Studies colaboration in Conception and detail engineering as a consultant at AMAL, S.A. for the construction of a

Visbraker Unit (VUVB).

- GALP ENERGIA –Sines Refinery (2010-2012) – Revamping da fábrica nº3 (Extensão da Unidade de Cracking e de Utilidades)

- Studies colaboration in Conception and detail engineering as a consultant at AMAL, S.A.

- GALP ENERGIA – Leça da Palmeira Refinery (2010-2014) – Parque de Armazenagem de Gasóleo - Studies colaboration in Conception and detail engineering as a consultant at AMAL, S.A.

- SONARA - Limbe Refinery - Cameroun (2010-2014) – « Réhabilitation et Extension de la Raffinerie y compris des

Parcs de Stockage » - Studies colaboration in Conception and detail engineering as a consultant at AMAL, S.A.

AMAL, S.A, (2015) & Constretal-SPA ( Since 2015 ): Engineering Director at Constretal-SPA, - Engineerind Management (multidisciplinary):

Creation/Organisation of the Engineering Department of Constretal-SPA.



Projects : - Naftal – Branche GPL- Alger

Réalisation du Centre Emplisseur de Bordj Menaeil en EPC (2015-2016) :

o Project coordination between various engineering suplyers. o Technical analysis of proposals o Management of the coordination engineering team o Project Director support

Propositions: - SONATRACH – SKIKDA (2015)

« Rénovation de Trois Bacs à Toits Flotants de Stockage de Hydrocarbures 600-S-55/57/58 » Capacities: Gasoil : 2 x 47.800 m3 ; One of Jet A1 of 41.250 m3 Technical and coordination and planning support.

- SONATRACH- SKIKDA (2015) Fire fighting system for several API Tanks. Technical and coordination and planning support.

- NAFTAL - BRANCH CARBURANTS (2015/2016) “Réalisation en EPC de l’Extension du Dêpot de Caroubier. Alger” Stocking Area for de Diesel Oil, Gasoline and Jet A1, filling islands for trucks and wagons, with two options :

Option 1 : 160.000 m3 diesel oil, 60.000 m3 gasoline e 15.000 m3 of Jet A1 Option 2 : 60.000 m3 diesel oil, 20.000 m3 de gasoline e 15.000 m3 of Jet A1

Technical and coordination and planning support.

- NAFTAL – BRANCH AEROPORTS (2015/2016) “ Ampliation du dépôt de carburant à Bejaia, Aéroport de Bejaia” Modification of the existing stocking area of 500 m3 of Jet A1(5x100 m3) by a new one of 3x 400 m3 of Jet A1, including complete reshuffling of existing fixed installations. Technical and coordination and planning support.

- NAFTAL – BRANCH MARINE (2015/2016) “PORT D’ALGER MARINE A 82 - EXTENSION DU CENTRE en EPC” Replacment of 5 tanks (5.780 m3 each), including reshuffling of fire fighting system, filling trucks islands, pumping area and fuel heating system and several fixed installations. Technical and coordination and planning support.

Other Activities :

- Colecção Imagens JCR ( Since September 2010):

Management, coordination and conception of photograph works ( Photo sessions and photo reports), mainly for his web-site.



Page 17 / 18 – Feb. 2016 Curriculum vitae of

Rollo, José Carlos For more information on Europass go to http://europass.cedefop.eu.int © European Communities, 2003 20051110



Documents

CURRICULUM VITAE - JRO Inglês Fev_2016 Rev. 16