LABO INGLES BUENO

Furniture&

Fume Cupboards

Laboratory

P r e s e n t a t i o n

Presentation

S t o r a g e C u p b o a r d s

U t i l i t y L i n e s

W o r k t o p s a n d S i n k s

F u m e C u p b o a r d s

S t a i n l e s s S t e e l F u r n i t u r e

L a b o r a t o r y B e n c h e s f o r S p e c i f i c A p p l i c a t i o n s

P l i n t h M o u n t e d S y s t e m

” C ” F r a m e S y s t e m

Today, almost 50 years later, our young, dynamic and modernbusiness, through a policy of permanent investment inindustrial, computer and technological means as well ashuman resources, still has its initial philosophy intact.

Our human resource team is dedicated to continue itscollaboration with our customers to become their reliablepartners. Our commitment to you is to provide loyal andprofessional service you are looking for as a user of ourproducts.

hen we began manufacturing and installing technicallaboratory furniture our business philosophy wasfounded on 4 basic pillars:W

Providing an optimal quality/price ratio.

Integrating technological advances as they emergeand incorporating them into our manufacturedproducts.

Direct and personal contact with our customersadvising them both before and after purchase.

Building “trust” as an essential factor of succes.

PROGRAMME ANDMANUFACTURE

Following the guidelines set bythe R&D Department, theProgramme and ManufactureDepartment carefully co-ordinates every process involvedin furniture manufacture.

This Department handles theinstallation and assembly of thefurniture.

All our Installation and AfterSales Team is trained by ourown engineering staff withoutinvolving any third partycontractors.

INSTALLATION ANDAFTER SALES SERVICE

FurnitureLaboratory

The Organisation

ehind our product you will find a business organisation consisting of 150qualified professionals and an industrial complex of 4000 m2.

Our size allows us to carry out operations that begin with the developmentof our product right through to its professional after sales service.

The single objective of every department is to offer you the best service at alltimes.

B

RESEARCH ANDDEVELOPMENT

ENGINEERINGAND PROJECTS

SALES ANDREPRESENTATIVE OFFICES

All our manufactured productshave been designed anddeveloped by our R&DDepartment.

New materials, their functionand design are progressivelybeing applied to our furnituremeeting the most rigorousstandards.

Looking for the optimal solutionfor any of our projects is thejob of our EngineeringDepartment which focuses itsattention on meeting userneeds.

The complete project for anideal job development implies:

Our sales organisation iscomprised of a central SalesDepartment in Madrid andRepresentative Offices inBarcelona, Seville, Alicante andCanary Islands.

This structure is supplementedby a network of distributors inother geographic areas.

Our salesman are always indirect and personal contactwith you both before and afteran installation is made.

A furniture distributionplan

An engineering plan forinstallation and utilitylines.

Thanks to the epoxy-polyestercoating our furniture productsremain completely unaffectedunder all types of wetconditions. The result is farsuperior to any other furnituremade using melamine coveredchipboard.

UNALTERABLE UNDERWET CONDITIONS

he concept of quality of our furniture begins with the use and processing of onlythe best raw materials.

The base of our products is ST-32 grade cold-rolled steel according to DIN 17,140standards subjected to processes that include cold rolling, degreasing and

electrolytic zinc plating, phosphate treatments, chrome plating and cold shaping.

The use of this raw material gives or furniture significant advantages over other productssuch as melamine covered chipboard or plastics, etc.:

T

The rigidity of steel gives ourfurniture far greater endurancethan timber based products.This proven by the durabilityof drawer guides and bearingsas well as sturdiness of hinges.Our furniture has an averagelifetime of 30 years.

STURDY ANDDURABLE

The Product

(*) Parts per million

SAMPLE TESTED WEIGHTLOSS (g)

CARBONMONOXIDE (CO)

NITROUS FUMES(NO + NO2)

HYDROCHLORIC ACID(HCl)

347* 260*Melamine covered fireproofchipboard

481* 96*Melamine coveredchipboard

53* 0*Coated steel

8,44

7,46

0,43

2716*

3194*

626*

MELAMINE COVERED CHIPBOARD EPOXY-POLYESTER PROTECTEDSTEEL

• Registered models (Nos. 128,809 and 22,356).• Characteristics and sizes are subject to change and technical improvement.

Very often laboratories mustcarry out tasks using highlyflammable products which maylead to an occasional small fire.

Metal furniture has hugeadvantages over melaminecovered chipboard since itdoes not contribute tocombustion, toxic fumes aremuch less.

GOOD PERFORMANCE WHENEXPOSED TO HEAT OR FLAME

The epoxy-polyester paint as-sures an ideal performanceagainst chemical attack.

GREATER CHEMICALRESISTANCE

Health is fundamental in a labo-ratory. Steel prevents any typeof bacterial proliferation sincethere are no porous materialsused like those found on chip-board furniture.

EASY CLEANSING FOR SAFETYFROM BIOLOGICAL HAZARDS

FurnitureLaboratory

MELAMINE COVERED CHIPBOARD EPOXY-POLYESTER PROTECTEDSTEEL

ur work begins with close consultation during the initialphases of your project. We gather data concerning yourneeds, advising you on the most appropriate materialsfor your work and looking for the most profitable and

functional solution for your laboratory.

O

The Service

The Engineering and Projects Department willput a FURNITURE DISTRIBUTION LAYOUTat your disposal which will be progressivelyadapted until it fits your needs perfectly.

In order to be involved in the development ofthe project as a collaborator, we will submitan exhaustive INSTALLATION AND SERVICEDRAWING for your approval that willsummarise all the aspects that should be takeninto consideration for the building as well asmechanical and electrical works in order toassure you have the correct furnitureinstallation.

From the beginning we co-ordinate all aspectsregarding the furniture installation.

Thus, you can be assure of having an aesthetic,durable and solid installation.

Procurement of materials.

Co-ordination of the building, mechanical andelectrical works, partitions, etc.

On site survey and checking.

Assembly checking.

Start-up.

his system is the culmination of constant research within the laboratory world.It emerges from an evolution of needs that have arisen from the more than 3000installations that we have carried out to date. The modular conception is basedon a self-supporting structure (of 900 mm, 1200 mm, 1500 mm or 1800 mm) made

of ST-23 grade cold-rolled steel which allows for flexible and functional space distributionsoffering a maximum return on investment.

T

“C” Frame System

“ C ” F r a m e S y s t e m


eninsular and Island Benches are equippedwith complete reagent shelves that include:P

Service gallery with a capacity for 8 differentservice pipes.

Electrical trunking where sockets, electric circuitbreakers and other accessories such as telephoneand computer outlets, etc. can be installed.

Independent shelves, height adjustable to anyposition on each side of the bench.

Peninsular and Island Benches withComplete Reagent Shelves

750 750

1560

60

900750

1960

all Benches can also be equipped with acomplete reagent shelf that includes:W

Service gallery with a capacity for 4 different service pipes.

Electrical trunking where sockets, electric circuit breakers andother accessories such as telephone and computer outlets, etc.can be installed.

Independent shelves, height adjustable to any position.

To assure a perfect bench finish, wall benches with completereagent shelves incorporate a front panel made of polyvinylchloride coated steel.


750

810

60

900750

1960

Wall Bench with Complete Reagent Shelves

Peninsular and Island Benches with Services on the Worktop

he “C” Frame System allows for the installation of Peninsular and Island Benches withoutcomplete reagent shelves. In this case, services run through the inside of the benchesto appear on the worktop surface. The absence of complete reagent shelves offers awide open space for a comfortable working environment.T


750 750

1500

900750


Wall Bench with Services on the Worktop

nstallation of complete reagent shelves on a wall bench is not always possible due todifferent physical characteristics within a laboratory.In these circumstances services must be mounted on the worktop.Benches are well finished and perfectly joined to the wall through a suitable splashback.I

750

900750

Construction Details

ADJUSTABLE HEIGHT OF SHELVES

Shelves are independent and heightadjustable to any position, thus increasingorganisational and storage possibilitiesconsiderably.

he ”C” Frame System is designed mindful of the need to increase comfort and aestheticappearance in all types of laboratories.T

LONGITUDINAL MOVEMENT OF UNDERBENCH FURNITURE

The structure has a rail installed under the work area so that furniture can be easily movedalong these rails for the entire length of the table. Thus, with this system spaces can beorganised to adapt them to the user’s needs at any given time.


LIGHT FITTINGS

Light fixtures may be adapted tothe 900 mm, 1200 mm, 1500 mm or1800 mm modular shelves.

BACK PANELS

Sometimes a Wall Bench must beinstalled in a peninsular or islandposition in some laboratories.

In this situation, wall benches can befurnished with a back panel that blendsharmoniously with the rest of thefurniture.

CORNER PANELS

Corner Panels allow bench corners tobe resolved seamlessly integratingthem with the rest of the furniture.


Shelving

Comprising of 900 mm, 1200 mm, 1500 mm and 1800 mm modular units. Each unit has:

Vertical support structures made of extruded 6063 aluminium coated withan epoxy-polyester paint.

Electrical trunking where sockets, electric circuit breaker and other accessoriescan be located.

2 or 4 independent shelves (Wall Bench or Island Bench) height adjustableto any position.

OVERBENCH SERVICE SHELVES (WITH ELECTRICAL TRUNKING)

COMPLETE REAGENT SHELVES


Service gallery with a capacity for a maximum of 8 different services.

Electrical trunking where sockets, electric circuit breakers and otheraccessories can be located.


Comprising of 900 mm, 1200 mm, 1500 mm, and 1800 mm modular units directly fixed on theworktop. Each unit has:


Comprised of modular 900 mm, 1200 mm, 1500 mm and 1800 mm modular units directly fixedon the worktop. Each unit has:

OVERBENCH SHELVES



The wall supports for the shelves are made ofinjection moulded 2640 aluminium coated with anepoxy-polyester paint.

Shelves have internal and external tops to preventfalls.

Horizontal and vertical support bars.

Front protection for glass.

WALL-MOUNTED SHELF


Internal steel shelves coated with PVC forgreater protection.

Furniture for “C” Frame System

he furniture units are manufactured in ST-32 grade cold-rolled steel according to DIN17.140 standards and coated with epoxy-polyester resin.T

Labelling area for drawers and doors

Drawer guides and bearings designed tosupport up to 40 kg.

Hinges that open to 270º screwed to doorbolts.


Furniture for Benches 900 mm Height


600

1000

V - 220V - 220 F

V - 104V - 111 DV - 111 I

V - 110 DFV - 110 IF

V - 110 DV - 110 I

500

600

MODEL DOORS DRAWERS TRAYS FILE CABINET INTERNAL SHELVES

V - 220 B 2 _ _ _ 1

V - 103 B _ 3 _ _ _

V - 102 ARB _ _ 1 1 _

V - 110 DBV - 110 IB 1 _ _ _ 1

450

1000

V - 220 BV - 110 DBV - 110 IB

500

450

V - 102 ARB V - 103 B


V - 104 _ 4 _ _ _

V - 111 DV - 111 I 1 1 _ _ 1

V - 110 DFV - 110 IF 1 _ _ _ _

V - 110 DV - 110 I 1 _ _ _ 1

V - 220 2 _ _ _ 1

V - 220 F 2 _ _ _ _

Other models are available upon request.


sland and Peninsular Benches are equipped with OverbenchService Shelves directly fixed on the worktop that include:

Electrical trunking where sockets, electric circuit breakers and otheraccessories such as telephone and computer outlets, etc., can be installed.

Independent shelves, height adjustable to any position on each side ofthe bench.

Island and Peninsular Benches with Overbench ServiceShelves (with Electrical Trunking)

I

Services run through the inside of benchesto appear on the worktop surface.

The electrical trunking can also be installedon Overbench Service Shelves for WallBenches.


750 - 600

1500 - 1200

900750

18201670

750 - 600

Wall Benches with Overbench Shelves


lectrical outlets can be installed on either the splashback or through electrical pedestalboxes on the worktop.

Vertical support structures made of extruded6063 aluminium coated with an epoxy-polyester paint.

Independent shelves, height adjustable toany position.

E

In these case overbench shelves only include:

Overbench shelves can also be installed on Island andPeninsular Benches.

750 - 600

900750

18201670


n situations where shelving is not appropriate, services are provided directly on the worktopsurface through the bench.Installation of the electrical outlets is carried out on 4-socket electrical pedestal boxes.

Island and Peninsular Benches with Services on the Worktop

I

750 - 600

1500 - 1200

900750

750 - 600


Wall Bench with Services on the Worktop

ll services can be integrated on the worktop when shelving is not practical or requireddue to conditions such as windows and walls, etc. or simply for aesthetic considerations.

Benches are well finished and perfectly joined to the wall through a suitable splashback.A

750 - 600

900750


Construction Details

CORNERS

To cover corners suitable panels havebeen designed for complete integrationwith the furniture, leaving no gaps wheredust and dirt may be trapped.

BACK PANELS

Ducts for the different service lines canbe fully accessed through the backpanels.

Back panels are readily removed to easeservice maintenance.

Internal steel shelves coated with PVC forgreater protection.

Furniture for Plinth Mounted System

he furniture units are made from ST-32 grade cold-rolled steel according to DIN 17.140standards and coated with epoxy-polyester resin.

This is a consistent feature for the entire range of laboratory furniture assuring resistanceto corrosion.T

Labelling area for drawers and doors

Drawer guides and bearings designed tosupport up to 40 kg.

Hinges that open to 270º screwed to doorbolts.




750

1000

VR- 220VR- 220 F

VR - 105VR - 111 DVR - 111 I

VR - 110 DFVR - 110 IF

VR - 110 DVR - 110 I

500

750

600

1000

VR - 220 BVR - 220 BF

VR - 104 BVR - 110 DBFVR - 110 IBF

VR - 110 DBVR - 110 IB

500

600

VR - 111 DBVR - 111 IB

VR - 103 ARB


VR - 220 2 _ _ _ 1

VR - 105 _ 5 _ _ _

VR - 111 DVR - 111 I 1 1 _ _ 1

VR - 110 DFVR - 110 IF 1 _ _ _ _

VR - 110 DVR - 110 I 1 _ _ _ 1

VR - 220 F 2 _ _ _ _

VR - 220 B 2 _ _ _ 1

VR - 104 B _ 4 _ _ _

VR - 103 ARB _ 1 1 1 _

VR - 110 DBFVR - 110 IBF 1 _ _ _ _

VR - 110 DBVR - 110 IB 1 _ _ _ 1

VR - 220 BF 2 _ _ _ _

VR - 111 DBVR - 111 IB 1 1 _ _ 1




Desks

any laboratories have a need to integrate desk areas. The 1200 mm Desk Module isavailable both for an Island or Wall Bench configuration.M

File cabinet with sliding trayand file drawer.

Overhead cupboards.

Lighting.

Electrical trunking for electricaloutlets and telephone andcomputer outlets.

Front panel.

These units are comprised of:

L a b o r a t o r y B e n c h e s F o r S p e c i f i c A p p l i c a t i o n s

750 750

156060

750

1960

600

350 350

750

81060

750

1960

350


Titration Bench

his unit is ideal for carrying out chemical engineering tasks and other large assemblies.Similar to the “C” Frame System, 1200 mm and 1500 mm modules are available for Islandand Wall Bench configurations.T

The upper part of the bench iscomprised of 2 or 4 shelves (Wall orIsland Bench) where stainless steel1780 mm high support bars will belocated. This grid work is subdividedinto 300 mm squares using 12 mmstainless steel rods.

750 750

156060

525

19602300

750

81060

525

19602300


Chromatography Bench

hese benches are designed so that the chromatographs and the monitoring of gas inletscan be easily accessed from the back. Island and Wall Bench modules of 1200 and 1500mm are available as well as Wall Benches installed in island position. This system permitsthe integration of different types of optional furniture.T

Fluid outlet gallery allowing faucetsto be installed, complete withpressure gauges for continuousmonitoring.

Electrical trunking for sockets andelectric circuit breaker switches.

The upper part of the bench is comprised ofa fully equipped service gallery that includes:

750 750

156060

900750

1960540690

750

81060

900750

1960540690


alance benches are flexible systems with a vibration frequency of their own near 10Hz. These systems act as filters, cushioning a high percentage of amplitude vibrationsgreater than 12 Hz that may reach the system. The vibration-dampening area ismanufactured using a large mass mounted on shock absorbers and topped with a 500x 400 mm slab of granite.

Balance bench

B

750

900750

500

900

900750

400


Wash up unit for ending island bench

his unit is designed to harmoniously and functionally integrate sinks into ending islandbench.

This furniture is made of ST-32 cold-rolled steel coated with an epoxy-polyester resinassuring correct performance in wet conditions. Both sides have optional large capacity

waste receptacles available.

The unit includes a smoke coloured methacrylate splash board.

T

650

900


Wall Wash up Bench

all Wash up Benches provide the same features as the Wash up units for ending islandbench.

Splash boards are mounted at the back as well as sides, depending on projectrequirements.

The body of this furniture, as well as the Wash up units for ending island bench, is made of ST-32 cold-rolled steel coated with organic covering of epoxy polyester.

W

750

900

Mobile Benches

hese benches are supported with a frame made of ST-32 cold-rolled steel coated withan epoxy-polyester resin. Worktops can be made of heat-resistant synthetic resin (TRESPA)or postformed melaminate.

All the tables have spin casters and brake system.T

Laboratory Benches For Specif ic Appl icat ions

750

900750

orktops are manufactured with a thickness of 1.5 mm with reinforcement rods to achieve anunalterable surface even when forcibly bumped.

The 150 mm splashback forms one continuous piece with the worktop using a 15 mm radius.

Service lines are channelled through the inside of the benches and installed on worktop onboth Island and wall benches.

All drawers have ball-bearing rollers and all door hinges open 270º.

W

Stainless Steel Furniture


750

900750

17501600

750

900750

17501600

750

1500


SINKS

The stainless steel sinks are made with auniform thickness of 1.5 mm at all points.

Optional depth and sizes are available forthe basins.

SOLIDITY AND AESTHETIC

This heavy-duty furniture will give a longservice life thanks to the sturdy materialsused in its construction.

The high-quality design of this furniture canbe seen by its finishing work (splashback,radius, etc.).

MAXIMUM CLEANLINESS

The absence of organic elements in theconstruction assures greater ease forcleaning and disinfecting.

Stainless Steel Furniture for benches 900 mm Height

Stainless Steel Furniture for benches 750 mm Height

750

1000

VR- 220 IVR- 220 FI

VR - 105 IVR - 111 DIVR - 111 II

VR - 110 DFIVR - 110 IFI

VR - 110 DIVR - 110 II

500

750

600

1000

VR - 220 BIVR - 220 BFI

VR - 104 BIVR - 110 DBFIVR - 110 IBFI

VR - 110 DBIVR - 110 IBI

500

600

VR - 111 DBIVR - 111 IBI

VR - 103 ARBI

VR - 220 BI 2 _ _ _ 1

VR - 104 BI _ 4 _ _ _

VR - 111 - DBIVR - 111 - IBI 1 1 _ _ 1

VR - 110 DBFIVR - 110 IBFI 1 _ _ _ _

VR - 110 DBIVR - 110 IBI 1 _ _ _ 1

VR - 220 BFI 2 _ _ _ _


VR - 220 I 2 _ _ _ 1

VR - 105 I _ 5 _ _ _

VR - 111 DIVR - 111 II 1 1 _ _ 1

VR - 110 DFIVR - 110 IFI 1 _ _ _ _

VR - 110 DIVR - 110 II 1 _ _ _ 1

VR - 220 FI 2 _ _ _ _


VR - 103 ARBI _ 1 1 1 _

Other models are available on order.


Fume Cupboards

he fume cupboard is fundamental for any type of modern laboratory. Not onlyare they used for carrying out very delicate tests but also for conducting dangerousones as well. For this reason, safety in the laboratory will depend in many caseson the perfect operating conditions of the fume cupboard.

We have developed our entire range of cupboards according to the strictest ofEuropean standards which are the British Standard and the DIN Standard.

The high level of these standards assures a perfect operation in all types of laboratories.

Our wide range of cupboards allows us to adapt a model to fit every kind of job whetherthey be Equalising Cupboards, Compensating Cupboards, Ultra-Safety Cupboards orSpecialised cupboards for large assemblies, all of which provide perfect performanceand safety features.

T


"When it comes to Safety, Quality has no price"


The outside of the upper body is constructed ofcold sheet steel with a polyvinyl chloride coating.

The inside of the cabin is lined with fireproofpolyester, reinforced with fibre glass, and ismoulded without any seams as one solid piece.The corners are rounded in order to favour theperfect laminar air flow. (According to BS.3532 andBS.3953 standards).

The inside of the cabin is fixed to a stainless steelAISI 304 quality grade structure that give it itsextreme rigidity.

The completely waterproof lighting fixture allowsall points on the table to receive an illuminationof 500 lux.

The sash, with 6 mm tempered safety glass, iscomprised of a fixed structure as well as a slidingglass door permitting easy access for themanipulation of accessories inside the cupboardwhile protecting the face at all times.

The safety system, comprised of only 1counterweight supported by two 6 mm diameterstainless steel cables, locks and prevents the sashfrom falling, in case either cable were to break.Access to the counterweight is made through thefront of the cupboard which greatly facilitatesmaintenance. (According the BS.7258 standards).

Residuals coming from condensating fumes arechannelled to the drain.

General Characteristiques

The structure of the lower body is made of ST-32quality grade cold sheet steel with an epoxypolyester paint coating.

The pipe covers are also made of the samematerial.

Unconstrained access to the electrical servicesgive way to easy maintenance.

THE LOWER BODY

THE UPPER BODY

5

3

2

4

1

2


Safety Systems

PASSIVE SAFETY

The inside of the cabin, lined with highly fireproofpolyester, acts as a first barrier against any possiblefire or explosion that may be produced inside thecupboard.

The outside of the cabin is made of cold sheet steeland acts as a second contention barrier thus assuringthat any eventual fire does not go beyond theboundaries of the cupboard.

Weak areas in the ceiling have also been designedto yield in the case of explosion.

Control and alarm for fire prevention

A device inside the cabin will activate thealarms when an overheating situation occursdue to fire or explosion. The control device(4) allows the temperature to be regulated totrigger the alarm.

If at some time during operation, the internaltemperature were to rise above the degreespreviously set, the following operations willbe put into effect automatically:

Suction will be cut, which will activate the alarmlight indicator (2) and acoustical alarm (1).

The overheating alarm pilot (5) will beactivated.

An alarm signal will be sent to any existingsafety control centre.

Ultra-safety Control Panel

Standard Control Panel

ACTIVE SAFETY

Control of sufficient suction flow and correctopening of the sash according to BS.7258standard (3).

All the fume cupboard models can also incorporateadditional safety devices such as:

Control and alarm for reduction in suction flow

This system has an alarm light indicator (2) aswell as acoustical alarm (1) that detects areduction in the suction flow that may be dueto motor failure or clogged or fracturedconduits, etc., thus preventing the risk ofescaping fumes into the laboratory.


Equalising and Compensating Fume Cupboards

ith a working height of 900 mm, modules with widths of 1200, 1500 and 1800 mm are available.In all three versions, the working surface can be fitted with:W One piece seamless stoneware.

Epoxy resin.Polished granite.

All models can be manufactured with AISI 316 grade stainless steel on the inside of the cupboard.In addition, furniture can also be adapted to fit the lower body.

With the sash opening limitingdevice in place, our GKS, GKCS,GKIS and GKICS models havepassed the British Standard testsfor British Standard Certification,BS.7258, Parts 1 and 4.

740

1200 - 1500 - 1800

2500

60

740

925

1400

900

601200 - 1500 - 1800

2500

925

1400

900

LVG - 150 GKSLVG - 180 GKS

LVG - 120 GKS

LVG - 150 GKISLVG - 180 GKIS

LVG - 120 GKIS

LVG - 150 GKCSLVG - 180 GKCS

LVG - 120 GKCS

LVG - 150 GKICSLVG - 180 GKICS

LVG - 120 GKICS

LVG - 150 GKLVG - 180 GK

LVG - 120 GK

LVG - 150 GKILVG - 180 GKI

LVG - 120 GKI

LVG - 150 GKCLVG - 180 GKC

LVG - 120 GKC

LVG - 150 GKICLVG - 180 GKIC

LVG - 120 GKIC

600

LZM - 110 - IVLZM - 110 - DV

600

600

900 600

LZM - 220 - VLZM - 110 - DV

900

LZM - 220 - V(2 modules)

600

900

For LVG - 120 For LVG - 150 For LVG - 180


EQUALISING CUPBOARD COMPENSATING CUPBOARD

(Models with one piece seamless stoneware table surface)

Especially recommended for laboratories withclimate control systems, since 80% of theexpelled air is taken directly from the outsideof the laboratory, thus an imbalance in the airconditioning system will be kept to a minimumand energy will be saved as a consequence.

COMPENSATING CUPBOARDSEQUALISING CUPBOARDS

The cupboard is always creating a laminar air flowfrom the laboratory to the inside of the cupboardno matter what position the sash may be in.All air turbulence is avoided which may causetoxic fumes to escape into the laboratory.

INTERIOR CABIN EQUALISING EQUALISINGCOMPENSATING COMPENSATING

STANDARD

POLYESTER

STAINLESS STEEL

WITH ULTRA-SAFETY SYSTEM

Furniture for Fume Cupboards

740

940

2485

1600 - 1900

2800

1600 x 940 x 2500LVG - 160 - SM

1900 x 940 x 2500LVG - 190 - SM


LARGE ASSEMBLY FUME CUPBOARDS

In the Large Assembly Models,the sink and fluid service tapsare integrated on the side of thecupboard.

MODEL SIZE


Fume Cupboards Complying to the DIN Standard

lores Valles has designed a Special DIN 12924 Part 1 Standard Certified Model for theirsales in Germany (as well as in other European countries).

This model has the following outstanding features:FTotal height: 2,800 mm.Sash height: 1,800 mm.Ultra-Safety System incorporated.Sliding doors on the full height of the sash as well as upper By-passsuppression.

All models can be manufactured with AISI 316 grade stainless steel on the inside of the cupboard.In addition, furniture can also be adapted to fit the lower body.

740

940

1800

500

1600 - 1900

2500

1600 x 940 x 2500LVG - 160 - GKSB

1900 x 940 x 2500LVG - 190 - GKSB


Fume Cupboards for Normal Assemblies

he Fume Cupboard forNormal Assembliesincorporates a one pieceseamless stoneware table

surface at a working height of500 mm.

The Large Assembly modelallows the installation of largemachinery as well as the user’swork on the inside of the cabin.

In both cases, 1600 and 1900mm width modules can bemanufactured with AISI 316grade stainless steel on theinside of the cabin.

T

FUME CUPBOARDS FOR ASSEMBLIESWITH LOW TABLES

SPECIAL FEATURES

The inside is lined with fireproof polyester reinforced withfibre glass which is moulded without seams and has roundedcorners.

Both models have the ultra-safety system incorporated.

For the carrying out of chemical engineering assemblies,the cupboard can be equipped with a 12 mm stainless steelequipment rods to create a grid-work of 300 mm squares.

MODEL SIZE

553

780

1365

900

LVD - 120 - DNP

LVD - 120 - DN

LVD - 120 - GNP

LVD - 120 - GN

1200

2400


The working surface is a solid 20 mmpolished granite or epoxy resin(Durcon) table.

The LVD-120 Fume Cupboard

LVD-120 FUME CUPBOARD

TABLE SURFACE

EPOXY RESIN

EPOXY RESIN

LOWER BODY

WITHOUT DOORS

FOLDING DOORS

MODEL

GRANITE

GRANITE

WITHOUT DOORS

FOLDING DOORS

The inside of the cabin is steelconstructed with a coating of high-chemical-resistant polyvinyl chloride.

The sash is made of 6 mm safetyglass with counterweight.

The cupboard has a ST-32 grade coldsheet steel construction with organicepoxy-polyester resin coating.

COMPORTAMIENTO


AIR EXTRACTION AND DRIVINGSITUATION ON THE ROOM OF ABUILDING

DETAIL OF DRIVEN AIR

DETAIL OF AIR EXTRACTION

Air Extraction and Driving SystemOur Engineering Department will study the most adequate airextraction and driving (in compensating cupboards) systemfor each individual installation.When the complexity of the job requires it, exhaustive plansare designed for motor placement and ducts for the easiestinstallation.

Corrosion resistance of interiorpolyester lining

BUILDING CROSS SECTION

2nd floor

1st floor

ground

CO

NC

EN

TRA

TIO

N

AGENT

25% Immersion 30 m. Boiling x

x

x

x

SULPHURICACID

SULPHURICACID

HYDROCHLORICACID

HYDROCHLORICACID

HYDROCHLORICACID

NITRICACID

GLACIALACETICACID

PERCHLORICACID

NITROUSOXIDE

SODIUMHYDROXIDE

AMMONIA

SODIUMHYDROXIDE

AMMONIA

XYLOL

XYLOL

ACETONE

ACETONE

TURPENTINE

ETHANOL

ETHANOL

PAINTSOLVENTS(Toluene,cyclohexane, ethylacetate, isopropanol,butyl acetate,isobutanol).

FOR

MO

F A

TTA

CK

TIM

E

TEM

PE

RA

TUR

E

FULL

YSA

TISF

AC

TORY

SLIG

HTL

Y AT

TAC

KED

UN

SATI

SFA

CTO

RY

BLE

AC

HIN

G

100% Fumes 20 h. Boiling x

100% Fumes 160 h. Room x

25% Immersion 30 m. Room x




100% Fumes 30 m. Boiling

100% Fumes 160 h. Room x





Mixturewithoutwater

Immersion 30 m. Room x








Immersion 30 m. Boiling x

BEHAVIOUR

LVG - 180 GKSB

1200 x 925 x 2800 mm.

1500 x 925 x 2800 mm.LVG - 150 - GKD

LVG - 120 - GKD

1800 x 925 x 2800 mm.LVG - 180 - GKD

900

LZM - 220 - V(2 modules)

600

900600

LZM - 110 - IVLZM - 110 - DV

600

600

900 600

LZM - 220 - VLZM - 110 - DV

925

1550

900

740

1800*

1200 - 1500 - 1800

2800

geprüfteSicherheit

Product Safety

Furniture for Fume Cupboards

For LVG - 180For LVG - 120 For LVG - 150

* Opening sash height


Fume Cupboards Complying to the DIN Standard

For these Fume Cupboards, FloresValles has obtained thehomologation Certificatesaccording to the Standardsspecified in DIN 12924 Part 1Standard and the GS SafetyStandard awarded by TÜVRheinland. (These tests were carriedout in the Laboratories at theUniversity of Erlangen – Germany).

( models with one piece seamless stoneware table surface )

MODEL SIZE

STAINLESS STEEL

AISI 304 quality stainless steel with a 1.5 mm uniform thicknessthroughout the entire sink including the basin.

Bounded edges around the perimeter.

Special depth and sizes are available for the basins.


Sinks

MODEL DIMENSIONS

500 x 750

500 x 605

1000 x 750

1000 x 605

1000 x 750

1000 x 605

1500 x 650

1560 x 650

POLYPROPYLENE

Polypropylene injected basin welded to machined sheets.


MODEL DIMENSIONS

500 x 750

500 x 605

1000 x 750

1000 x 605

1000 x 750

1000 x 605

1500 x 650

1560 x 650

MODEL DIMENSIONS

500 x 750

1000 x 750

1000 x 750

1540 x 640

EPOXY RESIN

High chemical-resistant epoxy-resin injected construction in one solidpiece.



Worktops

CONTINUOUS CERAMIC

A solid plate of vitrified ceramic with boundededge around the perimeter.

Made of non-porous material, vitrified onedges and surfaces, yielding a high resistanceto fire.

Thickness: 30 mm

EPOXY RESIN (DURCON)

Durcon is a material with an excellent chemicaland heat performance. The compressed massis completely reparable by sanding withoutlosing any of its properties.

The absence of porous material makes itunalterable against chemical reagents anddoes not conduct electricity or heat.

Thickness: 25 mm

HEAT RESISTANT SYNTHETIC RESINS (TRESPA)

Layer-compressed worktop made of heatresistant synthetic resins (Trespa). The toplayer has a special construction to increaseresistance to chemical reagents.

Thickness: 20 mm


POLISHED GRANITE

South-African-quality polished granite surfacesmaintain and excellent performance againsta large number of chemical aggressions. Thismaterial, due to its hardness, has a very longservice life.

Thickness: 20 mm

POSTFORMED MELAMINE (FORMICA)

High-pressure layer formed panels meetingUNE-53173 standards with form postformedfront and PVC-covered side edges.

Thickness: 30 mm

STAINLESS STEEL

AISI 304 quality stainless steel in units of upto 3 meters long.

Thickness: 40 mm


Ducts and Drains

DUCTS

All utility lines are channelled through the inside of the benches and are fully accessible for easymaintenance.

Drains are made of different materials (glass, polypropylene, etc.) depending on the type of workrequired.


Fluids and Drip Cups

FAUCETS AND TAPS

In both cases, faucets and taps are coatedwith anti-corrosive material giving aporous free layer.

Tap handles are made using colouredpolyamide according to DIN 12929standards that identify the fluid line.

DRIP CUPS

Drip cups can be made in differentshapes and materials dependingon their location and task.

ON WORKTOPIN COMPLETE REAGENT SHELF


hannelling of the electric services in the “C” frame System Line as well as thePlinth-mounted one can be carried out using 3 different systems.

Electric Services

C

WORKTOP MOUNTED ELECTRICAL BOXES

The electric power lines are channelledthrough the inside of the benches andmounted on the worktop through electricalboxes.

Electrical boxes will have either 4 socketsfor Island Benches or 2 sockets for WallBenches.

SPLASHBACK

Electric power lines are distributedthrough a splashback that also serves asa finish panel for the bench. Double orsingle electrical sockets can be installedon the splashback as well as otheraccessories such as telephone andcomputer outlets, etc.

ELECTRICAL TRUNKING

Electrical sockets, electric circuit breakersand the telephone and computer outletsare located on this electrical trunkingmade of PVC and anchored to the shelfvertical supports.


CABINETS

Our cabinets are made of ST-32 grade cold-rolled steel and coated with epoxy-polyesterpaint.

Internal shelves are made of steel and coated with polyvinyl chloride.

Cupboards

OVERHEAD CUPBOARDS

Overhead cupboards are made of the same materials as the cabinets.


Acid and Alkali Storage Cupboards

ur safety cupboards for acid and alkali (bases) are made of ST-32 grade cold-rolled steelaccording to DIN 17,140 standards with a 1.5 mm thickness on lintels and a 0.8 mmthickness on the rest, coated with epoxy-polyester resin.

The cupboards are comprised of two independent bodies with 270º opening doors andindividual locks. A extraction fan may be installed in the section above the upper body.

O

UPPER BODY FOR ACID

The upper body has 3 one-piecepolypropylene drawers easyremovable for cleaning.

LOWER BODY FOR ALKALI (BASES)

The lower body has 2 one-piecestainless steel for cleaning drawerseasily removable.


Cupboards

MODEL UPPER BODY DOORS LOWER BODY DOORSDIMENSIONS

LAV - 090 - LC 900x450x2000 mm Sliding glass Metal folding

LAV - 120 - LC 1200x450x2000 mm Sliding glass Metal folding

LAV - 090 - P 900x450x2000 mm Metal folding

LAV - 120 - P 1200x450x2000 mm Metal folding

Metal folding

Metal folding

All models have locks for both the upper and lower bodies.

Overhead Cupboards

MODEL DOORSDIMENSIONS

LSA - 110 - DLSA - 110 - I

600x370x750 mm Metal folding

LSA - 200 900x350x750 mm -

LSA - 200 - L 900x350x750 mm Sliding glass

Acid and Alkali storage Cupboards

MODEL DIMENSIONS

LAB - 060 - DLAB - 060 - I 600x580x2000 mm

* With extraction fan included.

LAB - 060 - DE*LAB - 060 - IE* 600x580x2250 mm

LSA - 220 900x370x750 mm Metal folding

LSA - 300 1200x350x750 mm -

LSA - 300 - L 1200x350x750 mm Sliding glass

LSA - 320 1200x370x750 mm Metal folding

LSM - 300 1200x350x600 mm -

LSM - 300 - L 1200x350x600 mm Sliding glass


Documents

LABO INGLES BUENO