Embed Size (px)
Citation preview
Normas de argamassas de construção, ETICS e constituintes
1
Referência da norma
Título Citação no
JOUE Directiva
NP EN Título
CEN/TC 51 - Cement and building limes
EN 459-1:2010 Building lime - Part 1: Definitions, specifications and conformity criteria
No 89/106/EEC (C 344, 2010-12-17)
NP EN 459-1:2011
Cal de construção Parte 1: Definições, especificações e critérios de conformidade
EN 459-2:2010 Building lime - Part 2: Test methods No 89/106/EEC (No) NP EN 459-2:2011
Cal de construção Parte 2: Métodos de ensaio
EN 459-3:2011 Building lime - Part 3: Conformity evaluation
No 89/106/EEC (No) NP EN 459-3:2011
Cal de construção Parte 3: Avaliação da conformidade
CR 13933:2000 Masonry cement - Testing for workability (cohesivity)
No 89/106/EEC (No)
EN 196-1:2005 Methods of testing cement - Part 1: Determination of strength
No 89/106/EEC (No) NP EN 196-1:2006
Métodos de ensaio de cimentos Parte 1: Determinação das resistências mecânicas
EN 196-2:2005 Methods of testing cement - Part 2: Chemical analysis of cement
No 89/106/EEC (No) NP EN 196-2:2006
Métodos de ensaio de cimentos Parte 2: Análise química dos cimentos
EN 196-3:2005+A1:2008
Methods of testing cement - Part 3: Determination of setting times and soundness
No 89/106/EEC (No) NP EN 196-3:2005+A1:2009
Métodos de ensaio de cimentos Parte 3: Determinação do tempo de presa e da expansibilidade
CEN/TR 196-4:2007
Methods of testing cement - Part 4: Quantitative determination of constituents
No 89/106/EEC (No)
EN 196-5:2011 Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement
No 89/106/EEC (No) NP EN 196-5:2011
Métodos de ensaio de cimentos Parte 5: Ensaio de pozolanicidade dos cimentos pozolânicos
EN 196-6:2010 Methods of testing cement - Part 6: Determination of fineness
No
NP EN 196-6:2010
Métodos de ensaio de cimentos Parte 6: Determinação da finura
EN 196-7:2007 Methods of testing cement - Part 7: Methods of taking and preparing samples of cement
No
NP EN 196-7:2008
Métodos de ensaio de cimentos Parte 7: Métodos de colheita e de preparação de amostras de cimento
EN 196-8:2010 Methods of testing cement - Part 8: Heat of hydration - Solution method
No 89/106/EEC (No) NP EN 196-8:2010
Métodos de ensaio de cimentos Parte 8: Calor de hidratação Método da dissolução
EN 196-9:2010 Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method
No 89/106/EEC (No) NP EN 196-9:2010
Métodos de ensaio de cimentos Parte 9: Calor de hidratação Método semi-adiabático
EN 196-10:2006 Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement
No 76/769/EEC (C 23, 2005-01-28)
NP EN 196-10:2007
Métodos de ensaio de cimentos Parte 10: Determinação do teor do crómio (VI) solúvel em água no cimento
CEN/TR 15697:2008
Cement - Performance testing for sulfate resistance - State of the art report
No
CEN/TC 67 - Ceramic tiles
EN 1308:2007 Adhesives for tiles - Determination of slip No 89/106/EEC (No)
EN 1323:2007 Adhesives for tiles - Concrete slabs for tests
No
EN 1324:2007 Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives
No 89/106/EEC (No)
EN 1346:2007 Adhesives for tiles - Determination of open time
No 89/106/EEC (No)
EN 1347:2007
Adhesives for tiles - Determination of wetting capability
No 89/106/EEC (No)
Normas de argamassas de construção, ETICS e constituintes
2
Referência da norma
Título Citação no
JOUE Directiva
NP EN Título
EN 1348:2007 Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
No 89/106/EEC (No)
EN 12002:2008 Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts
No
EN 12003:2008 Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives
No
EN 12003:2008/AC:2009
Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives
No
EN 12004:2007 Adhesives for tiles - Requirements, evaluation of conformity, classification and designation
No 89/106/EEC (C 290, 2007-12-04)
NP EN 12004:2008
Colas para ladrilhos Requisitos, avaliação da conformidade, classificação e designação
EN 12808-1:2008 Grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars
No 89/106/EEC (No)
EN 12808-2:2008 Grouts for tiles - Part 2: Determination of resistance to abrasion
No 89/106/EEC (No)
EN 12808-3:2008 Grouts for tiles - Part 3: Determination of flexural and compressive strength
No 89/106/EEC (No)
EN 12808-4:2009 Grouts for tiles - Part 4: Determination of shrinkage
No 89/106/EEC (No)
EN 12808-4:2009/AC:2011
Grouts for tiles - Part 4: Determination of shrinkage
No 89/106/EEC (No)
EN 12808-5:2008 Grouts for tiles - Part 5: Determination of water absorption
No 89/106/EEC (No)
EN 13888:2009 Grout for tiles - Requirements, evaluation of conformity, classification and designation
No
CEN/TC 88 - Thermal insulating materials and products
EN 13495:2002
Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS)(foam block test)
No 89/106/EEC (No)
EN 13497:2002
Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS)
No 89/106/EEC (No)
EN 13498:2002
Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS)
No 89/106/EEC (No)
EN 13499:2003
Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification
No
EN 13500:2003
Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool – Specification
No
CEN/TC 104 - Concrete and related products
EN 480-1:2006+A1:2011
Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
No
NP EN 480-1:2006 + A1:2011
Adjuvantes para betão, argamassa e caldas de injecção Métodos de ensaio Parte 1: Betão de referência e argamassa de referência para ensaio
EN 480-2:2006 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time
No 89/106/EEC (No)
NP EN 480-2:2007
Adjuvantes para betão, argamassa e caldas de injecção Métodos de ensaio Parte 2: Determinação do tempo de presa
Normas de argamassas de construção, ETICS e constituintes
3
Referência da norma
Título Citação no
JOUE Directiva
NP EN Título
EN 480-4:2005 Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete
No 89/106/EEC (No)
NP EN 480-4:2007
Adjuvantes para betão, argamassa e caldas de injecção Métodos de ensaio Parte 4: Determinação da exsudação do betão
EN 480-5:2005 Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption
No 89/106/EEC (No)
NP EN 480-5:2007
Adjuvantes para betão, argamassa e caldas de injecção Métodos de ensaio Parte 5: Determinação da absorção capilar
EN 480-6:2005 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
No 89/106/EEC (No)
NP EN 480-6:2007
Adjuvantes para betão, argamassa e caldas de injecção Métodos de ensaio Parte 6: Análise por espectrofotometria de infravermelhos
EN 480-8:1996
Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content
No 89/106/EEC (No)
NP EN 480-8:1998
Adjuvantes para betão, argamassa e caldas de injecção Métodos de ensaio Parte 8: Determinação do teor de resíduo seco
EN 480-10:2009
Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content
No 89/106/EEC (No)
NP EN 480-10:2009
Adjuvantes para betão, argamassa e caldas de injecção Métodos de ensaio Parte 10: Determinação do teor de cloretos solúveis em água
EN 480-11:2005
Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete
No 89/106/EEC (No)
NP EN 480-11:2007
Adjuvantes para betão, argamassa e caldas de injecção Métodos de ensaio Parte 11: Determinação das características dos vazios do betão endurecido com ar introduzido
EN 480-12:2005
Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures
No 89/106/EEC (No)
NP EN 480-12:2007
Adjuvantes para betão, argamassa e caldas de injecção Métodos de ensaio Parte 12: Determinação do teor de álcalis dos adjuvantes
EN 480-13:2009+A1:2011
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
No
NP EN 480-13:2009 + A1:2011
Adjuvantes para betão, argamassa e caldas de injecção Métodos de ensaio Parte 13: Argamassa de alvenaria de referência para o ensaio de adjuvantes para argamassa
EN 480-14:2006
Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
No 89/106/EEC (No)
NP EN 480-14:2007
Adjuvantes para betão, argamassa e caldas de injecção Métodos de ensaio Parte 14: Medição da susceptibilidade à corrosão do aço em betão armado pelo ensaio electroquímico potenciostático
EN 934-1:2008 Admixtures for concrete, mortar and grout - Part 1: Common requirements
No 89/106/EEC (No)
NP EN 934-1:2008
Adjuvantes para betão, argamassa e caldas de injecção Parte 1: Requisitos gerais
EN 934-2:2009
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
No 89/106/EEC (C 152, 2009-07-04)
NP EN 934-2:2009
Adjuvantes para betão, argamassa e caldas de injecção Parte 2: Adjuvantes para betão Definições, requisitos, conformidade, marcação e etiquetagem
Normas de argamassas de construção, ETICS e constituintes
4
Referência da norma
Título Citação no
JOUE Directiva
NP EN Título
EN 934-3:2009
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
No 89/106/EEC (C 309, 2009-12-18)
NP EN 934-3:2009
Adjuvantes para betão, argamassa e caldas de injecção Parte 3: Adjuvantes para argamassa de alvenaria Definições, requisitos, conformidade, marcação e etiquetagem
EN 934-4:2009
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
No 89/106/EEC (C 152, 2009-07-04)
NP EN 934-4:2009
Adjuvantes para betão, argamassa e caldas de injecção Parte 4: Adjuvantes para caldas de injecção para bainhas de pré-esforço Definições, requisitos, conformidade, marcação e etiquetagem
EN 934-5:2007
Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
No 89/106/EEC (C 321, 2008-12-16)
NP EN 934-5:2008
Adjuvantes para betão, argamassa e caldas de injecção Parte 5: Adjuvantes para betão projectado Definições, requisitos, conformidade, marcação e etiquetagem
EN 934-6:2001 Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity
No 89/106/EEC (No)
NP EN 934-6:2003
Adjuvantes para betão, argamassa e caldas de injecção Parte 6: Amostragem, controlo da conformidade e avaliação da conformidade
EN 934-6:2001/A1:2005
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity
No 89/106/EEC (No)
NP EN 934-6:2003/ A1:2008
Adjuvantes para betão, argamassa e caldas de injecção Parte 6: Amostragem, controlo da conformidade e avaliação da conformidade
EN 12190:1998
Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
No 89/106/EEC (No)
EN 12192-1:2002
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar
No 89/106/EEC (No)
EN 13395-1:2002
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars
No 89/106/EEC (No)
EN 13395-2:2002
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar
No 89/106/EEC (No)
EN 13395-4:2002
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead
No 89/106/EEC (No)
EN 15167-1:2006
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
No 89/106/EEC (C 290, 2007-12-04)
NP EN 15167-1:2008
Escória granulada de alto forno moída para betão, argamassa e caldas de injecção Parte 1: Definições, especificações e critérios de conformidade
EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation
No 89/106/EEC (No)
NP EN 15167-2:2008
Escória granulada de alto forno moída para betão, argamassa e caldas de injecção Parte 2: Avaliação da conformidade
CEN/TC 125 - Masonry
EN 846-2:2000
Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
No 89/106/EEC (No)
Normas de argamassas de construção, ETICS e constituintes
5
Referência da norma
Título Citação no
JOUE Directiva
NP EN Título
EN 846-7:2000
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
No 89/106/EEC (No)
EN 998-1:2010 Specification for mortar for masonry - Part 1: Rendering and plastering mortar
No 89/106/EEC (C 344, 2010-12-17)
EN 998-2:2010 Specification for mortar for masonry - Part 2: Masonry mortar
No 89/106/EEC (C 344, 2010-12-17)
EN 1015-1:1998 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)
No 89/106/EEC (No)
EN 1015-1:1998/A1:2006
Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)
No 89/106/EEC (No)
EN 1015-2:1998 Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars
No 89/106/EEC (No)
EN 1015-2:1998/A1:2006
Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars
No 89/106/EEC (No)
EN 1015-3:1999 Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)
No 89/106/EEC (No)
EN 1015-3:1999/A1:2004
Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)
No 89/106/EEC (No)
EN 1015-3:1999/A2:2006
Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)
No 89/106/EEC (No)
EN 1015-4:1998 Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration)
No 89/106/EEC (No)
EN 1015-6:1998 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
No 89/106/EEC (No)
EN 1015-6:1998/A1:2006
Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
No 89/106/EEC (No)
EN 1015-7:1998 Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar
No 89/106/EEC (No)
EN 1015-9:1999 Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar
No 89/106/EEC (No)
EN 1015-9:1999/A1:2006
Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar
No 89/106/EEC (No)
EN 1015-10:1999 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
No 89/106/EEC (No)
EN 1015-10:1999/A1:2006
Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
No 89/106/EEC (No)
EN 1015-11:1999 Methods of test for mortar for masonary - Part 11: Determination of flexural and compressive strength of hardened mortar
No 89/106/EEC (No)
EN 1015-11:1999/A1:2006
Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
No 89/106/EEC (No)
EN 1015-12:2000
Methods of test of mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates
No 89/106/EEC (No)
EN 1015-17:2000 Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars
No 89/106/EEC (No)
EN 1015-17:2000/A1:2004
Methods or test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars
No 89/106/EEC (No)
Normas de argamassas de construção, ETICS e constituintes
6
Referência da norma
Título Citação no
JOUE Directiva
NP EN Título
EN 1015-18:2002
Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar
No 89/106/EEC (No)
EN 1015-19:1998
Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars
No 89/106/EEC (No)
NP EN 1015-19:2008
Métodos de ensaio de argamassas para alvenaria Parte 19: Determinação da permeabilidade ao vapor de água de argamassas de reboco endurecidas
EN 1015-19:1998/A1:2004
Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars
No 89/106/EEC (No)
EN 1015-21:2002
Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates
No 89/106/EEC (No)
CEN/TR 15225:2005
Guidance on Factory Production Control for the CE Marking (Attestation of Conformity 2+) of designed masonry mortars
No
CEN/TC 151 - Construction equipment and building material machines - Safety
EN 12001:2003+A1:2009
Conveying, spraying and placing machines for concrete and mortar - Safety requirements
No 98/37/EC (Expected) 2006/42/EC (C 136, 2010-05-26)
EN 12151:2007 Machinery and plants for the preparation of concrete and mortar - Safety requirements
No 98/37/EC (Expected)
CEN/TC 154 - Aggregates
EN 13055-1:2002 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
No 89/106/EEC (C 319, 2005-12-14)
NP EN 13055-1:2005
Agregados leves Parte 1: Agregados leves para betão, argamassas e caldas de injecção
EN 13055-1:2002/AC:2004
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout
No 89/106/EEC (C 167, 2010-06-25)
NP EN 13055-1:2005/ AC:2010
Agregados leves Parte 1: Agregados leves para betão, argamassas e caldas de injecção
EN 13139:2002 Aggregates for mortar No 89/106/EEC (C 319, 2005-12-14)
NP EN 13139:2005
Agregados para argamassas
EN 13139:2002/ AC:2004
Aggregates for mortar No 89/106/EEC (C 167, 2010-06-25)
NP EN 13139:2005/ AC:2010
Agregados para argamassas
EN 12620:2002+ A1:2008
Aggregates for concrete No 89/106/EEC (C 321, 2008-12-16)
EN 12620:2002+ A1:2010
Agregados para betão
CEN/TC 203 - Cast iron pipes, fittings and their joints
EN 15542:2008 Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods
No
CEN/TC 229 - Precast concrete products
EN 15422:2008 Precast concrete products - Specification of glassfibres for reinforcement of mortars and concretes
No
ECISS/TC 110 - Steel tubes, and iron and steel fittings
EN 10298:2005 Steel tubes and fittings for on shore and offshore pipelines - Internal lining with cement mortar
No
