Upload
don-thiago-oliveira
View
221
Download
0
Embed Size (px)
Citation preview
7/25/2019 Intervalos de Manuteno 950H (S Em Ingls)
1/4
Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 950H WHEEL LOADER M1G02283
Configuration: 950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine
Operation and Maintenance Manual950H and 962H Wheel Loaders and IT62H Integrated ToolcarrierMedia Number -SEBU7889-18 Publication Date -01/06/2011 Date Updated -10/06/2011
i04402294
Maintenance Interval Schedule
SMCS -7000
Ensure that all safety information, warnings, and instructions are read and understood before any operation or anymaintenance procedures are performed.
The user is responsible for the performance of maintenance. All adjustments, the use of proper lubricants, fluids,filters, and the replacement of components due to normal wear and aging are included. Failure to adhere to propermaintenance intervals and procedures may result in diminished performance of the product and/or acceleratedwear of components.
Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order todetermine the maintenance intervals. Products that operate in severe operating conditions may require morefrequent maintenance. Refer to the maintenance procedure for any other exceptions that may change the
maintenance intervals.
Note: The aftertreatment system can be expected to function properly for the useful life of the engine (emissionsdurability period), as defined by regulation. All prescribed maintenance requirements must be followed.
Note: Before each consecutive interval is performed, all maintenance from the previous interval must beperformed.
Note: If Cat HYDO Advanced hydraulic oils are used, the hydraulic oil change interval is extended to 3000hours. SOS services may extend the oil change even longer. Consult your Cat dealer for details.
When Required
Automatic Lubrication Grease Tank - FillBattery or Battery Cable - Inspect/ReplaceBucket Cutting Edges - Inspect/ReplaceBucket Hinge and Lift Arm Clearance Shims - Inspect/Adjust/ReplaceBucket Tips - Inspect/ReplaceCamera - CleanCircuit Breakers - ResetEngine Air Filter Primary Element - Clean/ReplaceEngine Air Filter Secondary Element - ReplaceEther Starting Aid Cylinder - Replace
Fuel System - PrimeFuses - ReplaceHigh Intensity Discharge Lamp (HID) - ReplaceOil Filter - InspectPallet Fork - InspectRadiator Core - Clean
Pgina 1 de 4950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 31) - D...
18/08/2011https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasea...
7/25/2019 Intervalos de Manuteno 950H (S Em Ingls)
2/4
Ride Control Accumulator - CheckSecondary Steering - TestWindow Washer Reservoir - FillWindow Wiper - Inspect/Replace
Every 10 Service Hours or Daily
Backup Alarm - TestCooling System Coolant Level - Check
Engine Oil Level - CheckFuel System Primary Filter (Water Separator) - DrainHydraulic System Oil Level - CheckQuick Coupler - CheckSeat Belt - InspectTransmission Oil Level - CheckWindows - Clean
Every 50 Service Hours or Weekly
Bucket Lower Pivot Bearings - Lubricate
Cab Air Filter - Clean/ReplaceFuel Tank Water and Sediment - DrainTire Inflation - Check
Every 100 Service Hours or 2 Weeks
Axle Oscillation Bearings - LubricateBucket Linkage and Loader Cylinder Bearings - LubricateBucket Upper Pivot Bearings - LubricateLogging Fork Clamp - LubricateSteering Cylinder Bearings - Lubricate
Initial 250 Service Hours
Engine Valve Lash - CheckTransmission Oil Filter - Replace
Every 250 Service Hours
Cooling System Coolant Sample (Level 1) - ObtainEngine Oil Sample - Obtain
Every 250 Service Hours or Monthly
Battery - CleanBelt - Inspect/Adjust/ReplaceBrake Accumulator - CheckBraking System - TestDifferential and Final Drive Oil Level - CheckDrive Shaft Spline (Center) - LubricateEngine Oil (High Speed) and Oil Filter - ChangeQuick Coupler - Lubricate
Every 250 Service Hours or 3 Months
Engine Oil and Filter - ChangePallet Fork - LubricateSteering Column Play - Check
Pgina 2 de 4950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 31) - D...
18/08/2011https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasea...
7/25/2019 Intervalos de Manuteno 950H (S Em Ingls)
3/4
Every 500 Service Hours
Transmission Oil Filter - Replace
Every 500 Service Hours or 3 Months
Differential and Final Drive Oil Sample - ObtainEngine Crankcase Breather - CleanEngine Oil (High Speed) and Oil Filter - ChangeEngine Oil and Filter - ChangeFuel System Primary Filter (Water Separator) Element - ReplaceFuel System Secondary Filter - ReplaceFuel Tank Cap and Strainer - CleanHydraulic System Biodegradable Oil Filter Element - ReplaceHydraulic System Oil Filter - ReplaceHydraulic System Oil Sample - ObtainTransmission Oil Sample - Obtain
Every 1000 Service Hours
Drive Shaft Support Bearing - Lubricate
Every 1000 Service Hours or 6 Months
Articulation Bearings - LubricateBattery Hold-Down - TightenCase Drain Screen (Strainer) (Steering Pump, Hydraulic Fan Pump, Motor) - CleanDrive Shaft Universal Joints - LubricateRoading Fender Hinges - LubricateRollover Protective Structure (ROPS) - Inspect
Steering Pilot Oil Screen (Command Control Steering) - Clean/ReplaceTransmission Oil - Change
Every 2000 Service Hours or 1 Year
Brake Discs - CheckDifferential and Final Drive Oil - ChangeEngine Valve Lash - CheckEngine Valve Rotators - InspectHood Tilt Actuator - LubricateHydraulic System Oil - Change
Hydraulic Tank Breaker Relief Valve - CleanService Brake Wear Indicator - CheckSteering Column Spline (Command Control Steering) - Lubricate
Every Year
Cooling System Coolant Sample (Level 2) - ObtainReceiver Dryer (Refrigerant) - Replace
Every 3000 Service Hours
Steering Column Spline (HMU Steering) - Lubricate
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Pgina 3 de 4950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 31) - D...
18/08/2011https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasea...
7/25/2019 Intervalos de Manuteno 950H (S Em Ingls)
4/4
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 6000 Service Hours or 6 Years
Cooling System Water Temperature Regulator - Replace
Every 12 000 Service Hours or 6 YearsCooling System Coolant (ELC) - Change
Copyright 1993 - 2011 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Aug 18 09:12:39 UTC-0300 2011
Pgina 4 de 4950H Wheel Loader M1G00001-UP (MACHINE) POWERED BY C7 Engine(SEBP4274 - 31) - D...
18/08/2011https://sis cat com/sisweb/sisweb/techdoc/techdoc print page jsp?returnurl=/sisweb/sisweb/mediasea